Related
Hey guys i need someone running a stock 4.1.1 JB ROM to download and test Smart status bar and just see if it causes a hot reboot or not. Im trying to diagnose an issue with this app and the latest CM10 nightlies for my Galaxy S 3 thank you guys
elesbb said:
Hey guys i need someone running a stock 4.1.1 JB ROM to download and test Smart status bar and just see if it causes a hot reboot or not. Im trying to diagnose an issue with this app and the latest CM10 nightlies for my Galaxy S 3 thank you guys
Click to expand...
Click to collapse
I've been running the Pro version on AOKP JB with no issues if that helps.
WiredPirate said:
I've been running the Pro version on AOKP JB with no issues if that helps.
Click to expand...
Click to collapse
Yes that does. Thank you.
For anyone else still reading, if you have stock 4.1.1 i would still appreciate it if you tested. thanks all!
Anton else?
Sent from my SGH-T999 using Tapatalk 2
nvm
Try another kernel ? Make sure you use aosp version of the kernel. What exactly is the problem with wifi ?
Sent from my GT-N7100
I tried the Zoot's wipe you suggested earlier, didn't fix the problem. Tried a few different kernels, all bootlooped.
The wifi takes a very long time scanning for networks, and won't connect to any network (unsecured, WEP, WPA, nothing). Works perfect on roms mentioned in first post, but not on 4.1.2 based PA.
Why do you want pa ? For per-app-dpi ? Well that can be done on normal phone also.
Sent from my GT-N7100
---------- Post added at 11:34 PM ---------- Previous post was at 11:29 PM ----------
You might want to take a look in Settings > Wi-Fi hit the Menu button again and choose Advanced and then make sure Keep Wi-Fi on during sleep is set to Always. Disable wifi timer.
Sent from my GT-N7100
do this 100 percent works
To insure this doesn't happen, just follow these steps:
1. Dial *#0011#
2. Hit the left menu softkey to bring up the menu, and select 'Wifi'
3. Turn OFF the 'Wifi Power Saving'
4. Exit, and Reboot
Where is my 100 dollar
nabilsweet007 said:
To insure this doesn't happen, just follow these steps:
1. Dial *#0011#
Click to expand...
Click to collapse
"Connection problem or invalid MMI code."
Did you try what I did ?
Sent from my GT-N7100
Try to change the flash root file. Look for cwm6-root-n7100 and flash it through Odin. It should work fine after that. Good Luck =D
Wow $100. Just trying to help only.
Odin back to original stock rom. Check all connection its ok or not.
Check ur note 2 version *#1234# and also imei *#06#.
Flash pa according to ur note2 version.
Check ur imei.
Flash kernel n modem based on ur note2 version.
I've tried all these things and none of them make wifi work for me on cm10 4.1.2 based roms. I don't think the problem is as simple as changing a setting or root/recovery, because simply flashing a different rom (TW 4.1.2 or 4.2 based PA) fixes the wifi issue entirely.
The $100 offer still applies to any developer who knows what the problem is and can provide files & specific instructions on how to fix the wifi connection issues I have with 4.1.2 based PA roms. Until then I'm gonna run an unofficial PA3 rom, with zero wifi issues.
Try this
First do a mega wipe.
Then flash the latest stock rom for your country.
Then do a mega wipe again.
Then flash aosp kernel(redpill or uneak)
Then flash pa .
Then flash gapps.
Try all the aosp kernels.
Try previous versions of the rom.
Try different versions of gapps.
Sent from my GT-N7100
UtkarshGupta said:
Try this
Click to expand...
Click to collapse
Please stop posting.
jakeordie said:
Please stop posting.
Click to expand...
Click to collapse
Why ? I am just trying to help.
Sent from my GT-N7100
I have a feeling you have the wrong kernel. Try finding the correct kernel for your baseband. Can you also take a screenshot of what is happening?
Sent from my GT-N7105 using xda app-developers app
stratex5 said:
I have a feeling you have the wrong kernel. Try finding the correct kernel for your baseband. Can you also take a screenshot of what is happening?
Click to expand...
Click to collapse
In Settings it says the baseband is N7100XXDLK7. This is probably because I've since flashed a stock rom from Dr. Ketan's thread. The label on the retail box says N7100ZNDXSG (but it doesn't say that's the baseband).
Are there AOSP kernels made for specific basebands?
Wifi works perfectly with every rom I've tried except anything CM10 4.1.2 based. The screen tear happened the same way with PA 2.99, and the same neak kernel fixed it, but there was never a problem with wifi on 2.99
Have you flashed isolated baseband from working rom?
If you have stock rom, extract tar and you will find modem.bin and flash it using odin for 'phone' tab
Just for safety make nandroid backup before it.
Sent from my GT-N7100 using xda premium
dr.ketan said:
Have you flashed isolated baseband from working rom?
Click to expand...
Click to collapse
Isolated, no. Are you saying that flashing a rom zip via CWM overwrites the existing baseband?
At this point, the unofficial PA 3.1 is working for me where the official PA 2.99 wasn't.....so the $100 offer is no more. Thanks everyone for trying to help me fix the problem, but now I've got the phone set up how I wanted with another rom.
jakeordie said:
Isolated, no. Are you saying that flashing a rom zip via CWM overwrites the existing baseband?
At this point, the unofficial PA 3.1 is working for me where the official PA 2.99 wasn't.....so the $100 offer is no more. Thanks everyone for trying to help me fix the problem, but now I've got the phone set up how I wanted with another rom.
Click to expand...
Click to collapse
There is no official pa for note 2.
Just ports.
Sent from my GT-N7100
jakeordie said:
Please stop posting.
Click to expand...
Click to collapse
That's rude. anyways try contacting other PA users , if they have the same problem there's something wrong with the rom, if its only you then something is wrong with the phone ( i had something like that back in s2 days and aokp, only my phone had wifi problems with it, other s2's worked good). and why not try this
UtkarshGupta said:
There is no official pa for note 2.
Just ports.
Click to expand...
Click to collapse
I was referring to this one http://forum.xda-developers.com/showthread.php?t=1970341, is it not official?
lesalloum said:
That's rude. and why not try this
Click to expand...
Click to collapse
I said please. Personally I think it's rude for someone to be giving advice when they don't know WTF they're saying.
Before I edited the OP, it said I had tried replacing the etc/wifi files from 4.1.1 and it didn't work.....maybe you missed that, no worries and thanks anyways.
Installed CyanogenMod 10, works very nice....but now no service and it shows my phone as a Galaxy Nexus. Please help.
nacraracer said:
Installed CyanogenMod 10, works very nice....but now no service and it shows my phone as a Galaxy Nexus. Please help.
Click to expand...
Click to collapse
Where did you get the rom?
gtdtm said:
Where did you get the rom?
Click to expand...
Click to collapse
http://www.youtube.com/redirect?q=h...D1u_dHgBUp1MdI7B8MTM3MDYyNjI3NkAxMzcwNTM5ODc2
That was build four. Build three does the same thing but it calls my phone a DIC2
nacraracer said:
http://www.youtube.com/redirect?q=h...D1u_dHgBUp1MdI7B8MTM3MDYyNjI3NkAxMzcwNTM5ODc2
That was build four. Build three does the same thing but it calls my phone a DIC2
Click to expand...
Click to collapse
Are you on Verizon? If so, you'll have to change your network mode. That rom has GSM by default I believe.
gtdtm said:
Are you on Verizon? If so, you'll have to change your network mode. That rom has GSM by default I believe.
Click to expand...
Click to collapse
Tried that. Ended up going back with a stock ROM to get the radio to wok again. But I sure would like to install a much newer stable ROM. Any suggestions?
nacraracer said:
Tried that. Ended up going back with a stock ROM to get the radio to wok again. But I sure would like to install a much newer stable ROM. Any suggestions?
Click to expand...
Click to collapse
Try Chilly's pacman rom. It has CM10 plus a lot more. It's quite stable. I think you'll want the 4-20 version.
Try chilly's cm10 rom its the one im using and its the most stable of all his jellybean roms. Use aero's v15 ics kernel too and use smoothass govenor andcset ur min and max 2 higer than the original and clear ur dalvik cache using android tweaker 2 every now and again to avoid lagging and boot loops. Ive been on it or awhile using those settings and tweaks and it works great on cdma.
Hi guys!
First of all I am sorry for posting in this forum but I believe Korean Note 2 is similar in many aspect to N7105 and also there are devs who can read and maybe come up with something.
I have a question for you. Has anyone tried an Android 4.3 custom ROM on e250s (Korean Note 2) ? I am currently on 4.1.2, a combination of Milan 3.0 and Milan 4.0 (I think this ROMs are also for N7105 because in About device section my phone appears to be a N7105 after flashing), with some stock kernel and cwm. I have tried a few 4.3 ROMs for N7105 (CM 10.2, Beanstalk, Illusion) but all get stuck at the boot logo (Samsung Galaxy Note 2). I even tried different kernels, compatible with 4.3 (SJKernel and NeKo) but again, with no luck.
Do you have a solution, link, idea?
Thanks in advance guys!
Any links?
Sent from the TermiNOTEr 2!
borijess said:
Any links?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
Here is a screenshot of my system.
razvan11malancus said:
Here is a screenshot of my system.
Click to expand...
Click to collapse
Ok that's 4.1.2 don't get it. Thought you had 4.3 touch wiz.
Sent from the TermiNOTEr 2!
borijess said:
Ok that's 4.1.2 don't get it. Thought you had 4.3 touch wiz.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
Yes. My actual ROM is 4.1.2. I have tried Jedi X19 (4.1.2) and also BeanStalk, Illusion, CM 10.2 (4.3), with the same result. Stuck at boot screen logo.
Ni hao
razvan11malancus said:
Hi guys!
First of all I am sorry for posting in this forum but I believe Korean Note 2 is similar in many aspect to N7105 and also there are devs who can read and maybe come up with something.
I have a question for you. Has anyone tried an Android 4.3 custom ROM on e250s (Korean Note 2) ? I am currently on 4.1.2, a combination of Milan 3.0 and Milan 4.0 (I think this ROMs are also for N7105 because in About device section my phone appears to be a N7105 after flashing), with some stock kernel and cwm. I have tried a few 4.3 ROMs for N7105 (CM 10.2, Beanstalk, Illusion) but all get stuck at the boot logo (Samsung Galaxy Note 2). I even tried different kernels, compatible with 4.3 (SJKernel and NeKo) but again, with no luck.
Do you have a solution, link, idea?
Thanks in advance guys!
Click to expand...
Click to collapse
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
cbeta1111 said:
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
Click to expand...
Click to collapse
Thanks.
I have finally installed 4.3 ROM after flashing a file that converts the kernel to e250s.
Vibration issue
Hi guys!
Is anyone else having issues with vibrations when using a N7105 ROM (with Android 4.2.2 or 4.3)? I mean the phone does not vibrate at all.
Do you know a fix or something?
Thanks!
razvan11malancus said:
Hi guys!
Is anyone else having issues with vibrations when using a N7105 ROM (with Android 4.2.2 or 4.3)? I mean the phone does not vibrate at all.
Do you know a fix or something?
Thanks!
Click to expand...
Click to collapse
Use AOSP e250s Thor's kernel (update-0.27-aosp-KO-LTE-e250s-lsi-n7100.zip)
download:
mediafire.com/folder/41s5eea1er9dt/0.27
original thread:
forum.tegraowners.com/viewtopic.php?f=41&t=872
cbeta1111 said:
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
Click to expand...
Click to collapse
what is that?
Cannot read chinese
can you give us link of downalod?
I own note 2 e250 s
---------- Post added at 02:55 AM ---------- Previous post was at 02:53 AM ----------
razvan11malancus said:
Thanks.
I have finally installed 4.3 ROM after flashing a file that converts the kernel to e250s.
Click to expand...
Click to collapse
which 4.3 ROM did you installed and how?
can you tell us bit more about converting kernels
Rajaasim1980 said:
what is that?
Cannot read chinese
can you give us link of downalod?
I own note 2 e250 s
---------- Post added at 02:55 AM ---------- Previous post was at 02:53 AM ----------
which 4.3 ROM did you installed and how?
can you tell us bit more about converting kernels
Click to expand...
Click to collapse
Hi. This is the link to the boot converter.
http://forum.xda-developers.com/showpost.php?p=36885456
All you have to do is flash this zip file from cwm after you first flash the ROM.
I have tried Illusion and PAC-MAN ROMs (N7105, Android 4.3) and also MIUI v5 for N7105 (Android 4.2.2) and all work fine.
There may be some ROMs (PAC-MAN) that give you "error 7" when flashing. You have to change the first line from META-INF/com/google/android/update script.
How I do that. I prefer to change the ROMs extension from zip to apk, then unzip it using APK Tool and go to the file, change extention to .txt and delete the first line (the one that starts with assert), thus the first line becoming the one with "show progress" or "mount". After that I zip it again with APK Tool and sign the ROM with ApkSign. I do not know why, I cannot sign it with APK Tool. After that, the flashing process should go fine. You have to install the right GApps for the ROM you are being flashing and then the boot converter from the link.
The only issue I have found was the absence of vibrations, but I managed to get it back by flashing Thor Kernel for Note 2, like cbeta1111 and eggymustdie told me. So huge thanks to them.
Good luck! Hope you will manage to install the desired ROM. In my opinion, PAC-MAN ROM is the best so far, with many, many options from CM, AOKP and Paranoid Android ROMs.
cbeta1111 said:
Use AOSP e250s Thor's kernel (update-0.27-aosp-KO-LTE-e250s-lsi-n7100.zip)
download:
mediafire.com/folder/41s5eea1er9dt/0.27
original thread:
forum.tegraowners.com/viewtopic.php?f=41&t=872
Click to expand...
Click to collapse
Thanks a lot man! It works now!
razvan11malancus said:
Hi. This is the link to the boot converter.
http://forum.xda-developers.com/showpost.php?p=36885456
All you have to do is flash this zip file from cwm after you first flash the ROM.
I have tried Illusion and PAC-MAN ROMs (N7105, Android 4.3) and also MIUI v5 for N7105 (Android 4.2.2) and all work fine.
There may be some ROMs (PAC-MAN) that give you "error 7" when flashing. You have to change the first line from META-INF/com/google/android/update script.
How I do that. I prefer to change the ROMs extension from zip to apk, then unzip it using APK Tool and go to the file, change extention to .txt and delete the first line (the one that starts with assert), thus the first line becoming the one with "show progress" or "mount". After that I zip it again with APK Tool and sign the ROM with ApkSign. I do not know why, I cannot sign it with APK Tool. After that, the flashing process should go fine. You have to install the right GApps for the ROM you are being flashing and then the boot converter from the link.
The only issue I have found was the absence of vibrations, but I managed to get it back by flashing Thor Kernel for Note 2, like cbeta1111 and eggymustdie told me. So huge thanks to them.
Good luck! Hope you will manage to install the desired ROM. In my opinion, PAC-MAN ROM is the best so far, with many, many options from CM, AOKP and Paranoid Android ROMs.
Click to expand...
Click to collapse
Thanks for detail response
I am using TWRP touch custom recovery. would this process work for TWRP?
I did not get second part about changing first line from META-INF/com/google/android/update script. where is that? You mean first line of custom 4.3/4.2 ROMs we are going to install?
and also do call recoding work in 4.3/4.2 PAC ROMS because i actually use this function and multi windows ?
This is dev forum, not Q&A. All questions should go in questions forum.
Rajaasim1980 said:
Thanks for detail response
I am using TWRP touch custom recovery. would this process work for TWRP?
I did not get second part about changing first line from META-INF/com/google/android/update script. where is that? You mean first line of custom 4.3/4.2 ROMs we are going to install?
and also do call recoding work in 4.3/4.2 PAC ROMS because i actually use this function and multi windows ?
Click to expand...
Click to collapse
Hi. It should definitely work with TWRP recovery as it installs like a normal zip file ROM.
The update script file is located in the ROM. You have to unzip it and go to that location as I have said in the anterior post.
Call recording works but I did not figured yet how to play the file after it is saved. It saves the file as a .3gpp but I think the problem is with Android 4.3 codecs.
EDIT: It works if you try to play it from the built in file manager. Not with Root Explorer. Do not know why.
Multiwindows work great in PAC-MAN ROM:
TheATHEiST said:
This is dev forum, not Q&A. All questions should go in questions forum.
Click to expand...
Click to collapse
Sorry, I know that this section is for developers only but I think it has more visibility here. It wont happen again.
razvan11malancus said:
Sorry, I know that this section is for developers only but I think it has more visibility here. It wont happen again.
Click to expand...
Click to collapse
That is an extremely bad excuse. What on earth do you think the dev forums would look like if everybody just decided to post non-relevant topics anywhere they wanted to?
TheATHEiST said:
That is an extremely bad excuse. What on earth do you think the dev forums would look like if everybody just decided to post non-relevant topics anywhere they wanted to?
Click to expand...
Click to collapse
Are you moderator or what?
Leave it for them to.move or delete
Sent from my GT-N7105 using Tapatalk 2
Rajaasim1980 said:
Are you moderator or what?
Leave it for them to.move or delete
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
Errr I did! and they have!!!!!
Doesn't mean I cant voice my opinion (Same as you did) as well as report post!
Hi,
I've tried several ROMS past few days and all of them had either the wi-fi or data not working.
Can someone please recomend a ROM that has these two working normally? I see no point of having a mobile without internet.
Please advise which one to try.
Thanks
raperot said:
Hi,
I've tried several ROMS past few days and all of them had either the wi-fi or data not working.
Can someone please recomend a ROM that has these two working normally? I see no point of having a mobile without internet.
Please advise which one to try.
Thanks
Click to expand...
Click to collapse
You can try shpongle or CM10. Flash proper kernel and you're good to go.
MScorporation95 said:
You can try shpongle or CM10. Flash proper kernel and you're good to go.
Click to expand...
Click to collapse
I've tried shpongle as well, and I booted the .img file that was in the zip but the phone was stuck on boot logo.
Which Kernel should I flash for shpongle and can you link me to these two working ROM's?
raperot said:
I've tried shpongle as well, and I booted the .img file that was in the zip but the phone was stuck on boot logo.
Which Kernel should I flash for shpongle and can you link me to these two working ROM's?
Click to expand...
Click to collapse
I see you are totally noob and don't want to search, just wait for help from another. Search a bit won't make you get tired, will it?
Anyway, for Shpongle, you can use HELLBOY 4.2 version or Ironman. For ROM link, you can find it by yourself.
Ringford said:
I see you are totally noob and don't want to search, just wait for help from another. Search a bit won't make you get tired, will it?
Anyway, for Shpongle, you can use HELLBOY 4.2 version or Ironman. For ROM link, you can find it by yourself.
Click to expand...
Click to collapse
Well I'm sorry but that's not the case. I've read like 50 threads at least during the past few days and searched allover the place.
I've installed few ROM's but none of them was good ( wifi/date not working) I really installed Shpongle but either I'm booting the wrong image ( cause it stuck on boot) or I'm doing something totally wrong.
That is why I asked for some help and not that I'm lazy.
raperot said:
Well I'm sorry but that's not the case. I've read like 50 threads at least during the past few days and searched allover the place.
I've installed few ROM's but none of them was good ( wifi/date not working) I really installed Shpongle but either I'm booting the wrong image ( cause it stuck on boot) or I'm doing something totally wrong.
That is why I asked for some help and not that I'm lazy.
Click to expand...
Click to collapse
Yeah, ganbatte!
Ringford said:
Yeah, ganbatte!
Click to expand...
Click to collapse
In case you are either the former or latter
http://forum.xda-developers.com/showthread.php?t=1954967
mcgi5sr2 said:
In case you are either the former or latter
http://forum.xda-developers.com/showthread.php?t=1954967
Click to expand...
Click to collapse
Hi I flahed Shpongle ROM with HELLBOY-2013-06-29-4.2 Kernel. THe wi-fi is working but mobile data I cannot connect. ITs checkmarked but doesnt work. Any ideas?
ALso I would lie to increase CPU speed to 12.ghz but in the settings there is no performance option. Need advise on this as well please.
Thanks
raperot said:
Hi I flahed Shpongle ROM with HELLBOY-2013-06-29-4.2 Kernel. THe wi-fi is working but mobile data I cannot connect. ITs checkmarked but doesnt work. Any ideas?
ALso I would lie to increase CPU speed to 12.ghz but in the settings there is no performance option. Need advise on this as well please.
Thanks
Click to expand...
Click to collapse
Have you set up your APN?
For overclocking, first go to Settings > About and tap build number 7 times then open Settings > Performance
Ringford said:
Have you set up your APN?
For overclocking, first go to Settings > About and tap build number 7 times then open Settings > Performance
Click to expand...
Click to collapse
Thank you very very much!