Related
Hello,
One friend of mine have flashed franco kernel, but problably the kernel was corrupted and now he get stuck at the google logo.
How can he push a new kernel to the phone memory to flash it in the recovery?
Adb push in a custom recovery or you can reflash your ROM
Sent from my Galaxy Nexus using Tapatalk 2
JB has been known to get stuck at "google" for 10min or so. Did you wait long enough?
good day.
RevengeFNF said:
Hello,
One friend of mine have flashed franco kernel, but problably the kernel was corrupted and now he get stuck at the google logo.
How can he push a new kernel to the phone memory to flash it in the recovery?
Click to expand...
Click to collapse
1) boot into bootloader
2) start recovery from bootloader
3) use adb push to copy a ROM to the /sdcard
4) flash it
Petrovski80 said:
1) boot into bootloader
2) start recovery from bootloader
3) use adb push to copy a ROM to the /sdcard
4) flash it
Click to expand...
Click to collapse
Confirmed working, and a BAZILLION times faster than the chrome browser.
Zector said:
Confirmed working, and a BAZILLION times faster than the chrome browser.
Click to expand...
Click to collapse
??? chrome browser can flash roms?
10chars
Does it work with CWM?
Petrovski80 said:
1) boot into bootloader
2) start recovery from bootloader
3) use adb push to copy a ROM to the /sdcard
4) flash it
Click to expand...
Click to collapse
I tried this and it said "insufficient permissions for device" in ADB. My phone randomly rebooted and gets stuck on the boot logo, but everything on my sdcard got deleted. I have a Verizon Galaxy Nexus if that helps
If it's only the kernel causing problems, the easiest would be to run "fastboot flash boot <name of boot.img here>" from fastboot?(the original boot.img from the rom he's using would be found inside the zip file)
But if you screwed something else up in the process, you may need to flash the entire rom again from the recovery. If you are using cwm recovery, I believe it allows you to mount storage, so you can just move the rom file from the computer, and if you are using twrp, they have an option to sideload(under advanced), where you can connect you phone to your pc and run "adb sideload <name of rom.zip file here>" and it will install it right away.
mortenmhp said:
using cwm recovery, I believe it allows you to mount storage, so you can just move the rom file from the computer
Click to expand...
Click to collapse
this will not work, not with cwm nor with twrp, at this point; likely, it will never work as we don't have removable storage.
Then just use the sideload, it works quite well for me.
mortenmhp said:
Then just use the sideload, it works quite well for me.
Click to expand...
Click to collapse
Or just 'adb push rom.zip /sdcard/', or if that doesn't work, 'adb push rom.zip /data/media'.
Sent from my i9250
in my case TWRP didn't do so good with adb,
I think the recovery devs should have ADB in mind first of all. without ADB ur one foot in the grave
GruiaNovac said:
in my case TWRP didn't do so good with adb,
I think the recovery devs should have ADB in mind first of all. without ADB ur one foot in the grave
Click to expand...
Click to collapse
adb works fine with TWRP if you have updated adb drivers/adb daemon.
guess fastboot flashing images also eludes you.
so no, you're not in the grave.
*note* thanks for necroing a thread from December.
No, in bootloader its fine.
And apparently (if It wasn't a fluke) I think i booted normally , and having no rom it just stood there, and adb worked.
that saved me
TWRP dissapoints . have to look for replacement
stuck in recovery
so Im stuck in a similar situation
before installing a ROM which instructed to wipe the device, i did so, in fact i over did it.. wiped data/cache/davlik/system and internal storage
the same storage which had the ROM that i was supposed to install after wiping it.
I felt very dumb, but now stuck with the bootloader / fastboot / and TWRP recovery .. the TWRP recovery version i have HAS the adb sideload feature
which i've tried to install the Cyanogen ROM using ./adb sideload filename.zip , which hasnt work for Cyanogen but worked for the GApps after that ( I thought that was kinda weird).
the sideload command goes thru the sending of the entire ROM to the phone, but it never installs correctly..
NOW im stuck
any suggestions or help on how i can do it with what appears to me to be as fastboot / adb side load / and recovery options"??
thank you very much in advance
=====
update
=====
solved my problem... mounting the partition turns on full ADB to push the files onto the drive and install them using the recovery software
Petrovski80 said:
1) boot into bootloader
2) start recovery from bootloader
3) use adb push to copy a ROM to the /sdcard
4) flash it
Click to expand...
Click to collapse
you just saved my life... and my phone
Hi everyone, i have medium to advanced experience with flashing tools, android drivers, adb, fastboot, recovery mode and so on.
This evening once i installed the OTA Update for my Galaxy Nexus (which was running Android 4.2) the process failed at the end (as usual -.-) and i got stuck at bootloader.
I've wiped it completely ending up with no OS installed on it, nothing on SDCARD (Internal storage in this case).
The problem is that, i have no drivers installed on my PC for this phone.
I've already downloaded the latest version of Android 4.2 to flash (.zip), but there's no way i can transfer the file to the phone without the drivers.
I already tried GNex toolkit but it's stuck on "waiting adb device" (i have no fastboot drivers installed and can't install them because i can't find a easy way to do so).
NexusRootToolkit fails on pushing the zip to the phone and flash also won't work.
Any idea of what can i do now?
I may even pay on paypal for a quick help to get my phone back on working
Get into the bootloader and use fastboot, or if you have a custom recovery installed (sounds like you don't) then you can adb push from there. ADB doesn't exist in the bootloader, only fastboot. Those are your options.
ttabbal said:
Get into the bootloader and use fastboot, or if you have a custom recovery installed (sounds like you don't) then you can adb push from there. ADB doesn't exist in the bootloader, only fastboot. Those are your options.
Click to expand...
Click to collapse
Actually i do have a custom recovery which is CMW, but i can't seem to get my internal storage mounted using i'ts options.
I will try to push the .zip using the ADB on the recovery mode.
After checking the logs i can now see :
Enable to mount /usb-otg
(Using NexusRootToolkit i just flashed TWRP as recovery mode)
Solved : adb push <romname.zip> /sdcard/<romname.zip>
After the push was completed, i flashed the new .zip using TWRP in recovery mode.
Has anyone found a solution to this? Same thing has happened to me and I'm freaking out.
NPasta said:
Has anyone found a solution to this? Same thing has happened to me and I'm freaking out.
Click to expand...
Click to collapse
You mean besides the post right above yours?
Solved : adb push <romname.zip> /sdcard/<romname.zip>
After the push was completed, i flashed the new .zip using TWRP in recovery mode.
Click to expand...
Click to collapse
Save the pain, just flash the stock ROM from fastboot already....
Mach3.2 said:
Save the pain, just flash the stock ROM from fastboot already....
Click to expand...
Click to collapse
This. I don't see what the problem is here.
marcelloLins said:
i have medium to advanced experience with flashing tools, android drivers, adb, fastboot, recovery mode and so on.
I already tried GNex toolkit but it's stuck on "waiting adb device" (i have no fastboot drivers installed and can't install them because i can't find a easy way to do so).
NexusRootToolkit fails on pushing the zip to the phone and flash also won't work.
Click to expand...
Click to collapse
If you have the experience you say you have why do you use a Toolkit? Just learning for myself.
Look for efrant posts, they are the best and most comprehensive even for medium-advanced experience.
With him you will learn everything you need to know, including getting out of trouble and out of.............toolkit.
Just in case (you never know in life) do you have android-sdk installed on your pc?
Good luck in your learning curve ( I am still and will always be in it)
help-a-noob
Having similar problem: no OS installed. Got bootloader and TWRP. adb push doesn't work: computer can't find device. how do I get to fastboot? HALP!
HALP...
That's classic..
Read this:
http://forum.xda-developers.com/showthread.php?t=1812959
Then follow this:
http://forum.xda-developers.com/showthread.php?t=1626895
gunner1937 said:
If you have the experience you say you have why do you use a Toolkit? Just learning for myself.
Look for efrant posts, they are the best and most comprehensive even for medium-advanced experience.
With him you will learn everything you need to know, including getting out of trouble and out of.............toolkit.
Just in case (you never know in life) do you have android-sdk installed on your pc?
Good luck in your learning curve ( I am still and will always be in it)
Click to expand...
Click to collapse
Yep, i do have it installed, mainly because i'm a developer myself ; )
I've solved it already, as i've said, pushing the rom using ADB.
The upgrade to 4.2.1 probably failed because i've had the phone rooted.
Thanks for all the support and links by the way
marcelloLins said:
The upgrade to 4.2.1 probably failed because i've had the phone rooted.
Click to expand...
Click to collapse
You are mistaken, root doesn't stop a system update. I can vouch for that myself, even though i know that it doesnt matter just from reading some people's posts around here.
You weren't exactly explicit on your first post, so I presume you didnt/dont have the correct baseband version for that specific OTA to apply. Very common.
Oh and if you've never been able to OTA update successfully, it's not "usual" for the rest of us. You should work towards becoming more verbose and objective when troubleshooting. That will make you more experienced.
Sent from my i9250
marcelloLins said:
Yep, i do have it installed, mainly because i'm a developer myself ; )
I've solved it already, as i've said, pushing the rom using ADB.
The upgrade to 4.2.1 probably failed because i've had the phone rooted.
Thanks for all the support and links by the way
Click to expand...
Click to collapse
Hey, I have this exact problem. My os is gone and all i have is my cwm.
I am also having trouble installing adb, my comp doesn't recognize my nexus.
Please help, thanks!
dicksonjoe said:
Hey, I have this exact problem. My os is gone and all i have is my cwm.
I am also having trouble installing adb, my comp doesn't recognize my nexus.
Please help, thanks!
Click to expand...
Click to collapse
Try installing the ADB Drivers manually in order for your PC to recognize it.
Have you tried putting it other modes such as Download Mode and check if your pc installs any driver?
You will have to ADB PUSH the OS image to your internal memory and use CW to flash the rom from the sdcard, but you will need the drivers installed or adb wont be able to see your phone
i have the same problem you had...
i read some stuff and installed adb, sdk and whatever...
im trying the " adb push" command, but i think im doing something wrong.
the rom is on c:\users\edgar\downloads
rom name is abc.zip (i renamed)
what is the correct command format i must type??
thanks guys...
edgarzin said:
i have the same problem you had...
i read some stuff and installed adb, sdk and whatever...
im trying the " adb push" command, but i think im doing something wrong.
the rom is on c:\users\edgar\downloads
rom name is abc.zip (i renamed)
what is the correct command format i must type??
thanks guys...
Click to expand...
Click to collapse
Use "adb sideload c:\users\edgar\downloads\abc.zip". "adb push" is for transferring files from PC to phone, not flashing.
AndyYan said:
Use "adb sideload c:\users\edgar\downloads\abc.zip". "adb push" is for transferring files from PC to phone, not flashing.
Click to expand...
Click to collapse
thanks, but isnt it what am i supposed to do? transfer the zip file to sdcard and then flash using twrp?
for example usb mount via twrp dont work for me
edgarzin said:
thanks, but isnt it what am i supposed to do? transfer the zip file to sdcard and then flash using twrp?
Click to expand...
Click to collapse
adb sideload does both transferring and flashing within a single command. The "sideloaded" ZIP gets saved as "sideload.zip" under the root of the storage.
Sent from Samsung Galaxy Nexus @ CM11
AndyYan said:
adb sideload does both transferring and flashing within a single command. The "sideloaded" ZIP gets saved as "sideload.zip" under the root of the storage.
Sent from Samsung Galaxy Nexus @ CM11
Click to expand...
Click to collapse
Thanks!! Now its working! in twrp, advanced mode, adb sideload, then i executed the command you told me!!! saved my phone
i'm having bootloop after installing 17/02/2013 CM10.1 rom on my gsm gnex. the issues are:
1. i don't have any previous working cm10 rom saved in phone's sdcard.
2. can't get adb working, maybe because i never enabled usb debugging mode before.
fyi, i have never flashed any other roms, just CM roms. please assist..
Go into recovery and transfer a new Rom download to your phone if you have a computer. There is an option to transfer files inside recovery.
eqjunkie829 said:
Go into recovery and transfer a new Rom download to your phone if you have a computer. There is an option to transfer files inside recovery.
Click to expand...
Click to collapse
that requires adb (adb_sideload- correct me if i'm wrong).. my adb is not working.. can't boot to android.. can't find a way to enable usb debugging mode.. so no adb..
Do you have a custom recovery or experience with fastboot? Boot a recovery image via "fastboot boot recoveryname*.img", and adb is enabled.
bodh said:
Do you have a custom recovery or experience with fastboot? Boot a recovery image via "fastboot boot recoveryname*.img", and adb is enabled.
Click to expand...
Click to collapse
i don't have custom recovery, but i know how to get into fastboot. please explain how to ""Boot a recovery image via "fastboot boot recoveryname*.img"""
[email protected] said:
i don't have custom recovery, but i know how to get into fastboot. please explain how to ""Boot a recovery image via "fastboot boot recoveryname*.img"""
Click to expand...
Click to collapse
Attached is clockworkmod touch recovery for gsm galaxy nexus, maguro. Phone in bootloader mode, open a terminal, cd to directory of fastboot and where you move this file to, type fastboot devices to verify device is connected, then "fastboot boot CWMT6023.img", without the quotes of course. This will temporarily allow you to use clockworkmod recovery, and thus adb, without having it on your device once you have selected "reboot now".
And if that didn't help, try consulting http://forum.xda-developers.com/showthread.php?t=1626895, since i'm thinking you haven't used fastboot in a terminal, but only know it's 'mode', and may need help with drivers.
You also might want to consider just straight out flashing cwm recovery, since YOU NEED TO MAKE BACKUPS!
[email protected] said:
i don't have custom recovery, but i know how to get into fastboot. please explain how to ""Boot a recovery image via "fastboot boot recoveryname*.img"""
Click to expand...
Click to collapse
If u don't have a custom recovery how did u flash cm10?
Sent from my Galaxy Nexus using xda premium
Esteway.619 said:
If u don't have a custom recovery how did u flash cm10?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
sorry, i got cwm. but what does fastboot have to do with cwm? i can't use cwm to restore because files can't be sent from computer to it.
as of fastboot in terminal, it seems the phone not connected to computer. is there anything has to do with my drivers? "fastboot device" command shows <waiting for device>
I gave you that link to set up drivers more than anything else. If you already have cwm, boot to it and now you can adb push a rom.zip to your sdcard and install it, wipe caches and perhaps a factory reset [if you're changing to a different rom], OR, you can first try and wipe cache and advanced, dalvik cache to see if that fixes the bootloop.
1. Why didn't you make a backup?
2. Why didn't you make sure you know how to get out of this situation before flashing new ROMs?
3. Search as there are LOTS of tutorials on how to use adb to side load a new ROM via CWM
EddyOS said:
1. Why didn't you make a backup?
2. Why didn't you make sure you know how to get out of this situation before flashing new ROMs?
3. Search as there are LOTS of tutorials on how to use adb to side load a new ROM via CWM
Click to expand...
Click to collapse
I know how to use the adb to sideload a new ROM, thank you.
But please read my earlier post, in order to use adb, usb debugging mode must be enabled in android settings.
Mine is disabled, and i can't enable it now.
[email protected] said:
I know how to use the adb to sideload a new ROM, thank you.
But please read my earlier post, in order to use adb, usb debugging mode must be enabled in android settings.
Mine is disabled, and i can't enable it now.
Click to expand...
Click to collapse
If you think that then you have no idea on how adb works...
That is ONLY applicable when Android is running. As it's not, it's irrelevant...
[email protected] said:
I know how to use the adb to sideload a new ROM, thank you.
But please read my earlier post, in order to use adb, usb debugging mode must be enabled in android settings.
Mine is disabled, and i can't enable it now.
Click to expand...
Click to collapse
ADB should work in your custom recovery regardless of USB debugging being enabled or disabled.
I can't tell you how many times I have rebooted into recovery, wiped, then realized I forgot to put a file on my sdcard that I wanted to flash. I then use adb to push the file(s) from within the recovery.
Edit: I really need to refresh prior to responding.
so i can't get adb working because of the driver? thats why i got "waiting for device" when pushing file to phone?
edit: i've installed all the required drivers, it's not my 1st time doing it. MAYBE, this computer never connected to my gnex before, as i've formatted it a few days ago. So the gnex driver was not properly installed.. Is it possible?
If that version of cm 10 is for 4.2.2., then i think you may have an issue accessing adb without first getting the rsa verification, even in recovery (but im not sure). Looks like your only other option would be to fastboot flash stock images. And of course it sounds like driver issues, especially if your fastboot is not even working. Again, that link I posted will get you back up and running. http://forum.xda-developers.com/showthread.php?t=1626895
Hi guys,
I would really appreciate any help getting out of this pickle (my first time trying to install a ROM).
Here's the situation:
- Running a Huawei P6-C00 Chinese phone
- Was interested in trying a custom ROM (e.g. CleanRom by @surdu_petru) in order to enable Google Apps
- Updated normally to B120 CN as instructed
- Rooted (using Root Wizard)
- Installed customer recovery (TWRP 2.6.3.3)
- Started flash process including advanced wipe in TWRP... wiped system, cache, davlik, etc... :crying:
- Realized that I didn't have the ROM .zip copied to the phone yet
Currently, I'm able to boot into TWRP but cannot connect using adb for sideload (TWRP just says starting sideload but never connects). What do you guys recommend? I don't have a backup of any working ROM or the stock image.
Is there a way to initiate a "standard" restore since I wiped all the caches? ...
Are there some tricks to getting ADB running so I can try to sideload the ROM again? ...
P6-C00 does not have an SD card, but is it possible to load the ROM onto a USB and read it from TWRP?
Thanks for any help!
Did u try connecting to adb?
Sent from my U9200 using XDA Premium 4 mobile app
some help
onetree said:
Hi guys,
I would really appreciate any help getting out of this pickle (my first time trying to install a ROM).
Here's the situation:
- Running a Huawei P6-C00 Chinese phone
- Was interested in trying a custom ROM (e.g. CleanRom by @surdu_petru) in order to enable Google Apps
- Updated normally to B120 CN as instructed
- Rooted (using Root Wizard)
- Installed customer recovery (TWRP 2.6.3.3)
- Started flash process including advanced wipe in TWRP... wiped system, cache, davlik, etc... :crying:
- Realized that I didn't have the ROM .zip copied to the phone yet
Currently, I'm able to boot into TWRP but cannot connect using adb for sideload (TWRP just says starting sideload but never connects). What do you guys recommend? I don't have a backup of any working ROM or the stock image.
Is there a way to initiate a "standard" restore since I wiped all the caches? ...
Are there some tricks to getting ADB running so I can try to sideload the ROM again? ...
P6-C00 does not have an SD card, but is it possible to load the ROM onto a USB and read it from TWRP?
Thanks for any help!
Click to expand...
Click to collapse
you can try it whith a linux pc (ubuntu)
i have the same problem
good luck!
onetree said:
Hi guys,
I would really appreciate any help getting out of this pickle (my first time trying to install a ROM).
Here's the situation:
- Running a Huawei P6-C00 Chinese phone
- Was interested in trying a custom ROM (e.g. CleanRom by @surdu_petru) in order to enable Google Apps
- Updated normally to B120 CN as instructed
- Rooted (using Root Wizard)
- Installed customer recovery (TWRP 2.6.3.3)
- Started flash process including advanced wipe in TWRP... wiped system, cache, davlik, etc... :crying:
- Realized that I didn't have the ROM .zip copied to the phone yet
Currently, I'm able to boot into TWRP but cannot connect using adb for sideload (TWRP just says starting sideload but never connects). What do you guys recommend? I don't have a backup of any working ROM or the stock image.
Is there a way to initiate a "standard" restore since I wiped all the caches? ...
Are there some tricks to getting ADB running so I can try to sideload the ROM again? ...
P6-C00 does not have an SD card, but is it possible to load the ROM onto a USB and read it from TWRP?
Thanks for any help!
Click to expand...
Click to collapse
Did you try it with fastboot?
Gesendet von meinem P6-U06 mit Tapatalk
ext4
taaeem said:
Did you try it with fastboot?
Gesendet von meinem P6-U06 mit Tapatalk
Click to expand...
Click to collapse
i know that he must use a linux pc that for the drivers
ext4 If say it right...
taaeem said:
Did you try it with fastboot?
Click to expand...
Click to collapse
Hi Taaeem,
Thanks for the hint. I read some posts on fastboot and tried the following, but could not get into fastboot mode.
Methods I tried
- Power off phone and then power on while holding vol-down button
- Select Reboot -> System option from TWRP, while holding volume down
- Select Reboot -> Bootloader option from TWRP
From what I understand, fastboot mode should be run from the /boot partition, which I didn't wipe. So any ideas how I can get into fastboot mode?
Thanks again!
Okay, I confirmed that I have at least some kind of fastboot access because I tried "fastboot reboot-bootloader" from command prompt on my PC, and it rebooted the phone (but the phone stayed on boot logo).
- Next time I get fastboot, should I run "fastboot flash [partition] [ROM-file.zip]"?
- If so, what partition should I specify? I'm confused about where this command will send the ROM file, and if so how do I find it from TWRP later on in order to install it?
Thank you!
One more update:
- Even though I'm stuck at boot logo when I try to enter fastboot mode, it looks like there is a somewhat working fastboot connection. I tried running "fastboot flash [partition] ROM.zip" but it fails after 16s ("remote: flash write failure" or "remote: partition does not exist"). I tried flashing to cache / data / system
Should I try @N!ELS huawei p6 suggestion of accessing by Linux? (I don't have one nearby) or am I using fastboot wrong?
Thanks!!
Also:
- I noticed that when I boot into TWRP the device shows as "..." in my system tray USB devices list.
- When I try to boot into fastboot mode, the device shows as "Android Sooner Single ADB Interface" (but phone is still stuck on boot logo)
- However I'm still not able to connect using ADB .. shows "error: device not found" in all cases)
- Finally, after powering off the phone does show the stock charging animation, which gives me hope that this can still be saved :crying:
onetree said:
One more update:
- Even though I'm stuck at boot logo when I try to enter fastboot mode, it looks like there is a somewhat working fastboot connection. I tried running "fastboot flash [partition] ROM.zip" but it fails after 16s ("remote: flash write failure" or "remote: partition does not exist"). I tried flashing to cache / data / system
Should I try @N!ELS huawei p6 suggestion of accessing by Linux? (I don't have one nearby) or am I using fastboot wrong?
Thanks!!
Also:
- I noticed that when I boot into TWRP the device shows as "..." in my system tray USB devices list.
- When I try to boot into fastboot mode, the device shows as "Android Sooner Single ADB Interface" (but phone is still stuck on boot logo)
- However I'm still not able to connect using ADB .. shows "error: device not found" in all cases)
- Finally, after powering off the phone does show the stock charging animation, which gives me hope that this can still be saved :crying:
Click to expand...
Click to collapse
fastboot mode on the P6 doesn't have any kind of ui for fastboot, so it stays on the boot logo, fastboot should work fine.
You could always find an USB OTG cable and connect a FAT32 partitioned mem stick with the .zip on it, TWRP allows flashing from USB memory as far as I know
You are definetely not out of hope, but im not sure about the compability of P6-U06 roms with the C00 variant.
onetree said:
One more update:
- Even though I'm stuck at boot logo when I try to enter fastboot mode, it looks like there is a somewhat working fastboot connection. I tried running "fastboot flash [partition] ROM.zip" but it fails after 16s ("remote: flash write failure" or "remote: partition does not exist"). I tried flashing to cache / data / system
Click to expand...
Click to collapse
Obviously you can't flash the whole zip file to every partition, infact you can't flash a .zip at all, atleast not in fastboot mode, .img extension is used. So don't try flashing the rom manually via fastboot, since you have a high risk of actually bricking the device, if not in the right hands.
Also when booted into TWRP, try "adb devices" in the cmd see if anything shows up.
onetree said:
One more update:
- Even though I'm stuck at boot logo when I try to enter fastboot mode, it looks like there is a somewhat working fastboot connection. I tried running "fastboot flash [partition] ROM.zip" but it fails after 16s ("remote: flash write failure" or "remote: partition does not exist"). I tried flashing to cache / data / system
Should I try @N!ELS huawei p6 suggestion of accessing by Linux? (I don't have one nearby) or am I using fastboot wrong?
Thanks!!
Also:
- I noticed that when I boot into TWRP the device shows as "..." in my system tray USB devices list.
- When I try to boot into fastboot mode, the device shows as "Android Sooner Single ADB Interface" (but phone is still stuck on boot logo)
- However I'm still not able to connect using ADB .. shows "error: device not found" in all cases)
- Finally, after powering off the phone does show the stock charging animation, which gives me hope that this can still be saved :crying:
Click to expand...
Click to collapse
Okay that's good when you are stuck at the logo and you can see your device at your PC you are in fastboot mode, from here you can work with fastboot commands NOT with ADB that will not work. Anyway isn't there a option in TWRP where you can mount your device to USB when that work you can just copy the files on your phone without to go with fastboot. When that don't work you must try to extract the .zip from the ROM you want to install and flash every image with fastboot I think that should work.
Gesendet von meinem P6-U06 mit Tapatalk
tauio111 said:
fastboot mode on the P6 doesn't have any kind of ui for fastboot, so it stays on the boot logo, fastboot should work fine.
You could always find an USB OTG cable and connect a FAT32 partitioned mem stick with the .zip on it, TWRP allows flashing from USB memory as far as I know
You are definetely not out of hope, but im not sure about the compability of P6-U06 roms with the C00 variant.
Obviously you can't flash the whole zip file to every partition, infact you can't flash a .zip at all, atleast not in fastboot mode, .img extension is used. So don't try flashing the rom manually via fastboot, since you have a high risk of actually bricking the device, if not in the right hands.
Also when booted into TWRP, try "adb devices" in the cmd see if anything shows up.
Click to expand...
Click to collapse
Okay so now I'm a bit paranoid about hard-bricking the device, and would rather not try my luck on a ROM that isn't approved for the P6-C00, haha...
At this point I just want to get a working OS installed (restore to the default for P6-C00 phone, even), and then maybe try to safely enable Google Apps. Any suggestions on how I can get this restored?
- I think the device came with a USB cable that is OTG.
- Seems like fastboot is also working, even though "fastboot getvar xxx" returns nothing useful
- ADB does not work while booted into TWRP (can't run shell, sideload, or list devices)
onetree said:
Okay so now I'm a bit paranoid about hard-bricking the device, and would rather not try my luck on a ROM that isn't approved for the P6-C00, haha...
At this point I just want to get a working OS installed (restore to the default for P6-C00 phone, even), and then maybe try to safely enable Google Apps. Any suggestions on how I can get this restored?
- I think the device came with a USB cable that is OTG.
- Seems like fastboot is also working, even though "fastboot getvar xxx" returns nothing useful
- ADB does not work while booted into TWRP (can't run shell, sideload, or list devices)
Click to expand...
Click to collapse
Download this rom for example https://disk.yandex.com/public/?hash=bhDlIAc5AqKh4RAB2IdatPdEfYVI9FH/Zky/UTGcH3M=
Extract the .z7 and run the flash_all.bat, this scripts flashes the rom via fastboot and you should get your device back up and running again. And from there you can update to a newer firmware version without problems.
If the bat doesn't work try this:
boot to fastboot
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot recovery
Wipe cache and dalvik cache in twrp
tauio111 said:
Download this rom for example https://disk.yandex.com/public/?hash=bhDlIAc5AqKh4RAB2IdatPdEfYVI9FH/Zky/UTGcH3M=
Extract the .z7 and run the flash_all.bat, this scripts flashes the rom via fastboot and you should get your device back up and running again. And from there you can update to a newer firmware version without problems.
If the bat doesn't work try this:
boot to fastboot
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot recovery
Wipe cache and dalvik cache in twrp
Click to expand...
Click to collapse
Thank you! I will try this tonight after work
tauio111 said:
Download this rom for example https://disk.yandex.com/public/?hash=bhDlIAc5AqKh4RAB2IdatPdEfYVI9FH/Zky/UTGcH3M=
Extract the .z7 and run the flash_all.bat, this scripts flashes the rom via fastboot and you should get your device back up and running again. And from there you can update to a newer firmware version without problems.
If the bat doesn't work try this:
boot to fastboot
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot recovery
Wipe cache and dalvik cache in twrp
Click to expand...
Click to collapse
Thanks, tauio111! That worked and I now have a working phone again :victory:
I'm going to be a bit more careful about how to enable Google Apps... this is too much stress during the workweek haha.
Later on what do you think my best option would be?
- Wait for a confirmed easy to install ROM for P6-C00 that supports Google Apps
- Some other way to enable Google Apps with the standard firmware, since I am rooted?
Thanks :laugh:
onetree said:
Thanks, tauio111! That worked and I now have a working phone again :victory:
I'm going to be a bit more careful about how to enable Google Apps... this is too much stress during the workweek haha.
Later on what do you think my best option would be?
- Wait for a confirmed easy to install ROM for P6-C00 that supports Google Apps
- Some other way to enable Google Apps with the standard firmware, since I am rooted?
Thanks :laugh:
Click to expand...
Click to collapse
Easy, flash this via TWRP
tauio111 said:
Easy, flash this via TWRP
Click to expand...
Click to collapse
Thanks @tauio111 and everyone else who helped debug this.
I flashed stock recovery, updated official firmware to B120, re-flashed TWRP, flashed gapps, and now have a working phone with Gmail and Play Store!! :silly:
tauio111 said:
Download this rom for example https://disk.yandex.com/public/?hash=bhDlIAc5AqKh4RAB2IdatPdEfYVI9FH/Zky/UTGcH3M=
Extract the .z7 and run the flash_all.bat, this scripts flashes the rom via fastboot and you should get your device back up and running again. And from there you can update to a newer firmware version without problems.
If the bat doesn't work try this:
boot to fastboot
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot recovery
Wipe cache and dalvik cache in twrp
Click to expand...
Click to collapse
I have the same problem and i do the same but nothing..
I tried to delete xposed installer and my phone stuck..
What can i do?
Edit:It s opened but i can t touch my screen.I try to put my password and i can t..
tauio111 said:
Download this rom for example (Removed to allow posting - faye2thesky)
Extract the .z7 and run the flash_all.bat, this scripts flashes the rom via fastboot and you should get your device back up and running again. And from there you can update to a newer firmware version without problems.
If the bat doesn't work try this:
boot to fastboot
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot recovery
Wipe cache and dalvik cache in twrp
Click to expand...
Click to collapse
Heya Tauio111, I'm having the same problem as onetree and I've been frying my mind over this for the past 4 days before I came across your solution. I found that your link is no longer working, may I ask what that ROM is and where else I may find it? Thanks!
faye2thesky said:
Heya Tauio111, I'm having the same problem as onetree and I've been frying my mind over this for the past 4 days before I came across your solution. I found that your link is no longer working, may I ask what that ROM is and where else I may find it? Thanks!
Click to expand...
Click to collapse
A way that may help (i've done it with boot&recovery images). Using this tool http://forum.xda-developers.com/showthread.php?t=2433454 , might give you the *.img files necesary for flashing the stock rom through fast boot. All you need is to follow the instructions on the tool and have a stock rom (update.app file type), and some knowledge on how to use the fastboot.
Hi Guys,
I kinda did the same thing here.
I accidently wiped my system with TWRP v2.6.3.7
I also have a huawei ascend p6 u06
I didn't realize i never copied a rom to my device so i don't know how to install.
I can't seem to be able to use adb or fastboot and my device is not picked up by windows (8.1), it just says removable disk in my computer.
and under device manager it says P6-U06 under unknown devices.
I have tried to install a bunch of different drivers to attempt something but no luck.
Please help me.
Hello. I decided today to clean install the Pixel Experience 10 rom. I previously had a Pixel Experience 9.0 Pie. I did the following:
1. Booted into TWRP and selected Format Data
2. Everything is deleted, so it's time to flash a new rom. The guide says to go Advanced/ADB sideload and enter a command.
3. Command is not working. My phone is connected to the computer but it's not recognized. I can't even manually transfer it to the phone so i can install it via TWRP.
So i enter fastboot. Phone is recognized. When i type fastboot devices i get this:
Code:
C:\adb>fastboot devices
42abad9b fastboot
If i try to flash again a TWRP, my phone disconnects and it asks to reboot the phone by pressing a volume button. And i am stuck here. Nothing i can do. Any suggestions? I haven't done anything unusual. I am truly desperate. Any help will be appreciated.
naruto14 said:
Hello. I decided today to clean install the Pixel Experience 10 rom. I previously had a Pixel Experience 9.0 Pie. I did the following:
1. Booted into TWRP and selected Format Data
2. Everything is deleted, so it's time to flash a new rom. The guide says to go Advanced/ADB sideload and enter a command.
3. Command is not working. My phone is connected to the computer but it's not recognized. I can't even manually transfer it to the phone so i can install it via TWRP.
So i enter fastboot. Phone is recognized. When i type fastboot devices i get this:
If i try to flash again a TWRP, my phone disconnects and it asks to reboot the phone by pressing a volume button. And i am stuck here. Nothing i can do. Any suggestions? I haven't done anything unusual. I am truly desperate. Any help will be appreciated.
Click to expand...
Click to collapse
Hi !
Did you bypass ARB with dummy.img before you flashed TWRP?
Do you use win 10, if you are change usb or use usb hub. If that doesn't help use win 7.
follow the link for details
https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219
Good luck and stay safe.
drnightshadow said:
Hi !
Did you bypass ARB with dummy.img before you flashed TWRP?
Click to expand...
Click to collapse
I already had TWRP from long ago. And i didn't even try to flash a new ROM. I just formatted Data. I have the TWRP version 3.3.1-0. But as i said, PC does not recognize phone in TWRP and i can't adb sideload any ROM because of it.
naruto14 said:
I already had TWRP from long ago. And i didn't even try to flash a new ROM. I just formatted Data. I have the TWRP version 3.3.1-0. But as i said, PC does not recognize phone in TWRP and i can't adb sideload any ROM because of it.
Click to expand...
Click to collapse
Go back to previous version of TWRP(latest is buggy) or use OrangeFox recovery.
But still if you lose custom recovery you need again start over and bypass ARB.
And check if your bootloader is still unlock.
drnightshadow said:
Go back to previous version of TWRP(latest is buggy) or use OrangeFox recovery.
But still if you lose custom recovery you need again start over and bypass ARB.
And check if your bootloader is still unlock.
Click to expand...
Click to collapse
I can't go to a previous version of TWRP. I can't flash any recovery via fastboot because of the problem i said at the first post. I somehow managed to boot into some previous versions of TWRP via a tool called TOOL_ALL_IN_ONE, but nothing changed. I had the same exact problems.
How will i check in my current status if bootloader is still unlocked?
naruto14 said:
I can't go to a previous version of TWRP. I can't flash any recovery via fastboot because of the problem i said at the first post. I somehow managed to boot into some previous versions of TWRP via a tool called TOOL_ALL_IN_ONE, but nothing changed. I had the same exact problems.
How will i check in my current status if bootloader is still unlocked?
Click to expand...
Click to collapse
Use this and post the result...
Code:
fastboot oem device-info
So you managed to get TWRP via TOOL_ALL_IN_ONE, ... when you are in TWRP flash TWRP again via TWRP or better flash OrangeFox Recovery(use SD CARD or adb push - for more info google it for adb commands), than reboot it directly into recovery again by TWRP option reboot to recovery... and now you can flash your ROM.
So make it simple
1st time you'll boot in TWRP by TOOL_ALL_IN_ONE,
than you'll flash recovery via TWRP and make it permanent,
Than you'll directly reboot to recovery via TWRP,
now you can wipe and flash your ROM.
Happy ending :highfive:
The problem was that i couldn't use ADB sideload because the phone wasn't recognized by the computer. And i fixed it in a very weird way, by connecting the phone to the PC monitor's USB hub and that way the phone was discovered by the computer. So i fastbootted the latest TWRP and then easily transferred the ROM i wanted to flash via TWRP. It's crazy that i spent all day just to connect the phone to a USB hub so it could work...
naruto14 said:
The problem was that i couldn't use ADB sideload because the phone wasn't recognized by the computer. And i fixed it in a very weird way, by connecting the phone to the PC monitor's USB hub and that way the phone was discovered by the computer. So i fastbootted the latest TWRP and then easily transferred the ROM i wanted to flash via TWRP. It's crazy that i spent all day just to connect the phone to a USB hub so it could work...
Click to expand...
Click to collapse
I'm glad that you fixed your phone :highfive:
I told you usb hub is the solution :laugh: yeah win10 sh*t mess with usb and all other stuff :crying: its a total [email protected]'ll never gonna use it.
nicee your phone is alive now ....
Good luck and stay safe.