Develop Bugs

[Q] Semi-bricked Nexus and not sure what to do

So I made a mistake and I tried to flash the newest aokp build 3 without a backup. I got my new phone a while back and never made a backup.
I flashed build 3 and (accidentally) some old gapps and I kept getting stuck on the Google screen.
Next I tried pushing files through the Gnex tool kit and manually through fastboot. I keep getting errors that there is no insecure boot or that the device is not connected. attempts at a temporary insecure boot on the tool kit fail.
Next I tried a wipe and then just installing build 3 without google apps so I could add the correct one after boot, but it is again stuck.
So now I'm really not sure what to do. Any suggestions?

Rule number 1 : STOP using toolkits!!
now, can you get into cwm recovery?

Yes, I can gt into twrp everything I did except for trying to push the last files was through twrp
by the way, I have a Verizon Nexus
And as a side comment: The tool kit was used as a last ditch effort. The toolkit had nothing to do with bricking the device. The toolkit has been extremely useful for unlocking and rooting multiple devices quickly.

You could eithther try to flash back to stock or you could boot into TWRP & adb push a different ROM. (You did try Wipe Data / Factory Reset right?)

MK17 said:
Yes, I can gt into twrp everything I did except for trying to push the last files was through twrp
by the way, I have a Verizon Nexus
And as a side comment: The tool kit was used as a last ditch effort. The toolkit had nothing to do with bricking the device. The toolkit has been extremely useful for unlocking and rooting multiple devices quickly.
Click to expand...
Click to collapse
I think what thegtfusion was trying to say was: if you wouldn't have used a toolkit in the past, you would have known how to fix your bootloop.
Buy anyway:
1) Boot into recovery and plug into your PC
2) Open a command prompt (in the folder where you have adb.exe and fastboot.exe)
3) Push the ROM (and kernel if it doesn't come with it) you want to flash to your device: adb push /path/to/ROM.zip /sdcard/
4) Reboot into fastboot mode
5) Erase your old ROM: fastboot erase system
6) Erase your old kernel: fastboot erase boot
7) Reboot into recovery
8) Wipe /data and /cache
9) Flash your ROM & kernel in recovery
10) Reboot. Done.
EDIT: Ninja'd by 3rdstring!

Screwing up is part of the learning process. It's actually a great way to learn how your phone really works.

Thanks for the reply. For some reason I can't get my device to be recognized on my new computer. I downloaded drivers, adb and fastboot and rebooted everything but it didn't work. I'll have to retry again on my other computer tomorrow.

MK17 said:
Thanks for the reply. For some reason I can't get my device to be recognized on my new computer. I downloaded drivers, adb and fastboot and rebooted everything but it didn't work. I'll have to retry again on my other computer tomorrow.
Click to expand...
Click to collapse
Try uninstalling all drivers and reinstalling them.
Sent from my Galaxy Nexus using xda premium

Drivers

Thanks for the drivers. I uninstalled all of the drivers and used the universal one. Everything seems to work until I run 'adb devices' and my Galaxy Nexus is not listed.
I feel that my device is not getting seen because of something I have wrong, but after adb, fastboot, and the correct drivers I'm not sure.
PS - Even with the universal driver I still have to run adb and fastboot from the original directory that I installed them correct? I don't run them from the driver in anyway correct?

MK17 said:
Thanks for the drivers. I uninstalled all of the drivers and used the universal one. Everything seems to work until I run 'adb devices' and my Galaxy Nexus is not listed.
I feel that my device is not getting seen because of something I have wrong, but after adb, fastboot, and the correct drivers I'm not sure.
PS - Even with the universal driver I still have to run adb and fastboot from the original directory that I installed them correct? I don't run them from the driver in anyway correct?
Click to expand...
Click to collapse
did you install android-sdk (and added adb/fastboot to your $PATH) or are you using binary versions of adb and fastboot downloaded elsewhere?
if it's the latter, commands should be run from the directory where you extracted them.
about the drivers, i think you need to go to device manager and update drivers manually to the ones you installed (refered here in the post before mine), assuming you're on windows.
sent from my i9250

You're booted into TWRP when trying adb?

Fixed! I ended up booting into recovery and the device was recognized in adb there. I was able to push fresh copies of aokp build 3 and gapps (my original build 3 download started failing) and now I just got done initiating swagger!

MK17 said:
Fixed! I ended up booting into recovery and the device was recognized in adb there. I was able to push fresh copies of aokp build 3 and gapps (my original build 3 download started failing) and now I just got done initiating swagger!
Click to expand...
Click to collapse
he didnt have usb debugging on.
sent from my i9250

Just for understanding, USB debugging is only activated through recovery?

It's also under settings >> developer options so you can use adb while the android is running.

3rdstring said:
It's also under settings >> developer options so you can use adb while the android is running.
Click to expand...
Click to collapse
Of course,but that is hard to get to when your phone doesn't boot

MK17 said:
Of course,but that is hard to get to when your phone doesn't boot
Click to expand...
Click to collapse
USB Debugging needs to be enabled in Android for ADB to work in Android.
CWM and TWRP have USB Debugging enabled by default, so ADB will work fine in recovery with no other action from the user.

Need urgent help, lost and confused.

Hello XDA, I got my Galaxy Nexus stock and OTA upgraded it to 4.1.1 Jellybean. I unlocked and rooted the phone and while installing roms I accidentally formatted and factory reseted my phone. I can get into boot loader, and I have CWM installed. If I could just move a rom onto the phone I could boot it. Problem is I cant figure out how to. Keep in mind I am also using a mac. Can anyone help me figure out how to push a rom zip onto the sdcard? Any help would be appreciated, thanks!

Mac infos
http://forum.xda-developers.com/showpost.php?p=23229578&postcount=3

Help
My ADB debugging wasnt on at the time, and now I cant push files to it, anyone have any ideas?

colinrball said:
My ADB debugging wasnt on at the time, and now I cant push files to it, anyone have any ideas?
Click to expand...
Click to collapse
You can abd push from a custom recovery

Alright so USB debugging isnt on but I can still use adb commands? How?

You have to boot into a custom recovery (CWM or TWRP) and use adb commands.
for ex. adb push NameOfRom.zip /sdcard/

I just tried that and my terminal returned
device not found

Don't mount anything don't do anything special in recovery at all.
You're booted into recovery?
Also...I found when I wasn't using naked drivers that it took ~30 seconds for ADB to actually be recognized.
Maybe wait a minute and try again.
If not unplug and plug in.

I can use fastboot commands and it it recognized in fastboot, can I flash a stock rom from this mode?

colinrball said:
I can use fastboot commands and it it recognized in fastboot, can I flash a stock rom from this mode?
Click to expand...
Click to collapse
If you're using fastboot...that means you're not in custom recovery.
Navigate to recovery in that menu.
Or use fastboot boot ______________.img to boot into a custom recovery if you have one downloaded and in your platform tools directory.
But yes, you COULD do that.
But I wouldn't yet.
You'll lose all of your data/apps/etc.

There are Google factory images for the GSM & Verizon versions
[HOW-TO] [GSM & CDMA] Convert to latest yakju/takju/mysid (incl JB) / Return to stock

Jubakuba said:
If you're using fastboot...that means you're not in custom recovery.
Navigate to recovery in that menu.
Or use fastboot boot ______________.img to boot into a custom recovery if you have one downloaded and in your platform tools directory.
But yes, you COULD do that.
But I wouldn't yet.
You'll lose all of your data/apps/etc.
Click to expand...
Click to collapse
There is nothing on my phone, I have CWM installed, however there are no ROMs on the sdcard to flash through CWM. How would I move a file onto my sdcard that I could flash with CWM via fast boot?

colinrball said:
There is nothing on my phone, I have CWM installed, however there are no ROMs on the sdcard to flash through CWM. How would I move a file onto my sdcard that I could flash with CWM via fast boot?
Click to expand...
Click to collapse
I've explained this process already.
Post three of my guide.
Good luck.
|
|
|
v​

You don't flash fastboot images via CWM. If you have CWM installed & you're booted in to bootloader (fastboot) mode use the volume keys to reboot into recovery

Jubakuba said:
If you're using fastboot...that means you're not in custom recovery.
Navigate to recovery in that menu.
Or use fastboot boot ______________.img to boot into a custom recovery if you have one downloaded and in your platform tools directory.
But yes, you COULD do that.
But I wouldn't yet.
You'll lose all of your data/apps/etc.
Click to expand...
Click to collapse
I tried pushing a zip to the phone while using adb and a custom recovery. My terminal says it pushed the files to my SD card, however when I go to install the zip, no files appear. Even when I restart recovery there are still no zips found. Any ideas?
Thanks,

Maybe try...
adb push NameOfRom.zip /sdcard/NameOfRom.zip
or
adb push NameOfRom.zip /data/media/NameOfRom.zip

3rdstring said:
Maybe try...
adb push NameOfRom.zip /sdcard/NameOfRom.zip
or
adb push NameOfRom.zip /data/media/NameOfRom.zip
Click to expand...
Click to collapse
Its still giving me a failed message, error flashing zip

[Soft Brick] No OS Installed

Hi everyone, i have medium to advanced experience with flashing tools, android drivers, adb, fastboot, recovery mode and so on.
This evening once i installed the OTA Update for my Galaxy Nexus (which was running Android 4.2) the process failed at the end (as usual -.-) and i got stuck at bootloader.
I've wiped it completely ending up with no OS installed on it, nothing on SDCARD (Internal storage in this case).
The problem is that, i have no drivers installed on my PC for this phone.
I've already downloaded the latest version of Android 4.2 to flash (.zip), but there's no way i can transfer the file to the phone without the drivers.
I already tried GNex toolkit but it's stuck on "waiting adb device" (i have no fastboot drivers installed and can't install them because i can't find a easy way to do so).
NexusRootToolkit fails on pushing the zip to the phone and flash also won't work.
Any idea of what can i do now?
I may even pay on paypal for a quick help to get my phone back on working

Get into the bootloader and use fastboot, or if you have a custom recovery installed (sounds like you don't) then you can adb push from there. ADB doesn't exist in the bootloader, only fastboot. Those are your options.

ttabbal said:
Get into the bootloader and use fastboot, or if you have a custom recovery installed (sounds like you don't) then you can adb push from there. ADB doesn't exist in the bootloader, only fastboot. Those are your options.
Click to expand...
Click to collapse
Actually i do have a custom recovery which is CMW, but i can't seem to get my internal storage mounted using i'ts options.
I will try to push the .zip using the ADB on the recovery mode.
After checking the logs i can now see :
Enable to mount /usb-otg
(Using NexusRootToolkit i just flashed TWRP as recovery mode)
Solved : adb push <romname.zip> /sdcard/<romname.zip>
After the push was completed, i flashed the new .zip using TWRP in recovery mode.

Has anyone found a solution to this? Same thing has happened to me and I'm freaking out.

NPasta said:
Has anyone found a solution to this? Same thing has happened to me and I'm freaking out.
Click to expand...
Click to collapse
You mean besides the post right above yours?
Solved : adb push <romname.zip> /sdcard/<romname.zip>
After the push was completed, i flashed the new .zip using TWRP in recovery mode.
Click to expand...
Click to collapse

Save the pain, just flash the stock ROM from fastboot already....

Mach3.2 said:
Save the pain, just flash the stock ROM from fastboot already....
Click to expand...
Click to collapse
This. I don't see what the problem is here.

marcelloLins said:
i have medium to advanced experience with flashing tools, android drivers, adb, fastboot, recovery mode and so on.
I already tried GNex toolkit but it's stuck on "waiting adb device" (i have no fastboot drivers installed and can't install them because i can't find a easy way to do so).
NexusRootToolkit fails on pushing the zip to the phone and flash also won't work.
Click to expand...
Click to collapse
If you have the experience you say you have why do you use a Toolkit? Just learning for myself.
Look for efrant posts, they are the best and most comprehensive even for medium-advanced experience.
With him you will learn everything you need to know, including getting out of trouble and out of.............toolkit.
Just in case (you never know in life) do you have android-sdk installed on your pc?
Good luck in your learning curve ( I am still and will always be in it)

help-a-noob
Having similar problem: no OS installed. Got bootloader and TWRP. adb push doesn't work: computer can't find device. how do I get to fastboot? HALP!

HALP...
That's classic..
Read this:
http://forum.xda-developers.com/showthread.php?t=1812959
Then follow this:
http://forum.xda-developers.com/showthread.php?t=1626895

gunner1937 said:
If you have the experience you say you have why do you use a Toolkit? Just learning for myself.
Look for efrant posts, they are the best and most comprehensive even for medium-advanced experience.
With him you will learn everything you need to know, including getting out of trouble and out of.............toolkit.
Just in case (you never know in life) do you have android-sdk installed on your pc?
Good luck in your learning curve ( I am still and will always be in it)
Click to expand...
Click to collapse
Yep, i do have it installed, mainly because i'm a developer myself ; )
I've solved it already, as i've said, pushing the rom using ADB.
The upgrade to 4.2.1 probably failed because i've had the phone rooted.
Thanks for all the support and links by the way

marcelloLins said:
The upgrade to 4.2.1 probably failed because i've had the phone rooted.
Click to expand...
Click to collapse
You are mistaken, root doesn't stop a system update. I can vouch for that myself, even though i know that it doesnt matter just from reading some people's posts around here.
You weren't exactly explicit on your first post, so I presume you didnt/dont have the correct baseband version for that specific OTA to apply. Very common.
Oh and if you've never been able to OTA update successfully, it's not "usual" for the rest of us. You should work towards becoming more verbose and objective when troubleshooting. That will make you more experienced.
Sent from my i9250

marcelloLins said:
Yep, i do have it installed, mainly because i'm a developer myself ; )
I've solved it already, as i've said, pushing the rom using ADB.
The upgrade to 4.2.1 probably failed because i've had the phone rooted.
Thanks for all the support and links by the way
Click to expand...
Click to collapse
Hey, I have this exact problem. My os is gone and all i have is my cwm.
I am also having trouble installing adb, my comp doesn't recognize my nexus.
Please help, thanks!

dicksonjoe said:
Hey, I have this exact problem. My os is gone and all i have is my cwm.
I am also having trouble installing adb, my comp doesn't recognize my nexus.
Please help, thanks!
Click to expand...
Click to collapse
Try installing the ADB Drivers manually in order for your PC to recognize it.
Have you tried putting it other modes such as Download Mode and check if your pc installs any driver?
You will have to ADB PUSH the OS image to your internal memory and use CW to flash the rom from the sdcard, but you will need the drivers installed or adb wont be able to see your phone

i have the same problem you had...
i read some stuff and installed adb, sdk and whatever...
im trying the " adb push" command, but i think im doing something wrong.
the rom is on c:\users\edgar\downloads
rom name is abc.zip (i renamed)
what is the correct command format i must type??
thanks guys...

edgarzin said:
i have the same problem you had...
i read some stuff and installed adb, sdk and whatever...
im trying the " adb push" command, but i think im doing something wrong.
the rom is on c:\users\edgar\downloads
rom name is abc.zip (i renamed)
what is the correct command format i must type??
thanks guys...
Click to expand...
Click to collapse
Use "adb sideload c:\users\edgar\downloads\abc.zip". "adb push" is for transferring files from PC to phone, not flashing.

AndyYan said:
Use "adb sideload c:\users\edgar\downloads\abc.zip". "adb push" is for transferring files from PC to phone, not flashing.
Click to expand...
Click to collapse
thanks, but isnt it what am i supposed to do? transfer the zip file to sdcard and then flash using twrp?

for example usb mount via twrp dont work for me

edgarzin said:
thanks, but isnt it what am i supposed to do? transfer the zip file to sdcard and then flash using twrp?
Click to expand...
Click to collapse
adb sideload does both transferring and flashing within a single command. The "sideloaded" ZIP gets saved as "sideload.zip" under the root of the storage.
Sent from Samsung Galaxy Nexus @ CM11

AndyYan said:
adb sideload does both transferring and flashing within a single command. The "sideloaded" ZIP gets saved as "sideload.zip" under the root of the storage.
Sent from Samsung Galaxy Nexus @ CM11
Click to expand...
Click to collapse
Thanks!! Now its working! in twrp, advanced mode, adb sideload, then i executed the command you told me!!! saved my phone

Problems rooting, adb etc.

Hello, I've tried rooting my Nexus 7 (2013) with LTE for like 5 hours now...
I've done every single thing in every single thread, and I still can't do ****.
I've tried the WugFresh root toolkit, but that did not work at all for me, I uninstalled and remove what they told me to do... But nothing worked, when I followed the WugFresh toolkit I lost usb mass storage... N7 did not appear at all on my computer, which it did, before I tried to screw with it...
I've tried doing it the manual way too, downloading all the drivers, uninstalling the other onces first.. But nothing... I could not even get the device listed in adb! I tried the full driver installation thing + automatic check if everything worked out, but the tablet would NOT run the script to reboot it into fastboot, and when I tried to restart the tablet into fastboot, and then continue to run the toolkit, it would start TWRP, the popup on my computer told me to flash something "!flashready", but I could not find it in the sdcard...
I unlocked the n7 manually, holding the volume button and power button down.
I know that was very bad written, but I'm a bit in a hurry. Anything I could do?

Potetsjokolade said:
Hello, I've tried rooting my Nexus 7 (2013) with LTE for like 5 hours now...
I've done every single thing in every single thread, and I still can't do ****.
I've tried the WugFresh root toolkit, but that did not work at all for me, I uninstalled and remove what they told me to do... But nothing worked, when I followed the WugFresh toolkit I lost usb mass storage... N7 did not appear at all on my computer, which it did, before I tried to screw with it...
I've tried doing it the manual way too, downloading all the drivers, uninstalling the other onces first.. But nothing... I could not even get the device listed in adb! I tried the full driver installation thing + automatic check if everything worked out, but the tablet would NOT run the script to reboot it into fastboot, and when I tried to restart the tablet into fastboot, and then continue to run the toolkit, it would start TWRP, the popup on my computer told me to flash something "!flashready", but I could not find it in the sdcard...
I unlocked the n7 manually, holding the volume button and power button down.
I know that was very bad written, but I'm a bit in a hurry. Anything I could do?
Click to expand...
Click to collapse
So the current condition of your device is that ADB is nonfunctional but you are able to temporarily boot into TWRP with fastboot - is this correct?

Username invalid said:
So the current condition of your device is that ADB is nonfunctional but you are able to temporarily boot into TWRP with fastboot - is this correct?
Click to expand...
Click to collapse
Yes, that is correct, temporarily, with the toolkit I mentioned. But I do not find the files that the toolkit tells me to flash

Potetsjokolade said:
I've tried doing it the manual way too, downloading all the drivers, uninstalling the other onces first.. But nothing... I could not even get the device listed in adb! I tried the full driver installation thing + automatic check if everything worked out, but the tablet would NOT run the script to reboot it into fastboot, and when I tried to restart the tablet into fastboot, and then continue to run the toolkit, it would start TWRP, the popup on my computer told me to flash something "!flashready", but I could not find it in the sdcard...
I unlocked the n7 manually, holding the volume button and power button down.
Click to expand...
Click to collapse
I'm not sure what this means. If you're using a toolkit, you're not doing it manually. Have you tried ADB and fastboot alone, without a toolkit? Is TWRP on your phone now? If so, you're done; just flash from recovery 1) a ROM for a custom ROM or 2) SuperSU.zip for just root.
If you don't have TWRP, does your Google boot screen has a locked icon at the bottom? If so: for ADB to work you need to have debugging turned on in your phone's developer settings. You don't need ADB though; just reboot into the bootloader by holding power and volume-down. Then type "fastboot devices" and see if anything shows up.
If it's an unlocked icon, just flash a recovery.img from fastboot.

bananagranola said:
I'm not sure what this means. If you're using a toolkit, you're not doing it manually. Have you tried ADB and fastboot alone, without a toolkit? Is TWRP on your phone now? If so, you're done; just flash from recovery 1) a ROM for a custom ROM or 2) SuperSU.zip for just root.
If you don't have TWRP, does your Google boot screen has a locked icon at the bottom? If so: for ADB to work you need to have debugging turned on in your phone's developer settings. You don't need ADB though; just reboot into the bootloader by holding power and volume-down. Then type "fastboot devices" and see if anything shows up.
If it's an unlocked icon, just flash a recovery.img from fastboot.
Click to expand...
Click to collapse
Tried both manually with adb, and with WugFresh toolkit. I got WugFresh to run TWRP temporarily.

Potetsjokolade said:
Yes, that is correct, temporarily, with the toolkit I mentioned. But I do not find the files that the toolkit tells me to flash
Click to expand...
Click to collapse
The toolkit is using the command
Code:
fastboot boot openrecovery-twrp-2.6.3.0-deb.img
to temporarily boot it over the stock recovery. Since you unlocked your bootloader manually, you can replace the stock recovery manually too using
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img

Username invalid said:
The toolkit is using the command
Code:
fastboot boot openrecovery-twrp-2.6.3.0-deb.img
to temporarily boot it over the stock recovery. Since you unlocked your bootloader manually, you can replace the stock recovery manually too using
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img
Click to expand...
Click to collapse
How can I do that when my N7 does not show up on
adb devices
Click to expand...
Click to collapse
Getting "waiting for device"

Potetsjokolade said:
How can I do that when my N7 does not show up on
Click to expand...
Click to collapse
Fastboot is separate from ADB. Your fastboot is working if the toolkit is able to boot TWRP.
Code:
fastboot devices
is what you use while your device is in the bootloader.

Username invalid said:
Fastboot is separate from ADB. Your fastboot is working if the toolkit is able to boot TWRP.
Code:
fastboot devices
is what you use while your device is in the bootloader.
Click to expand...
Click to collapse
Great! I'll try that, just upoading openrecovery-twrp-2.6.3.0-flo.img to dropbox, just in case I'm able to flash it from download/

Potetsjokolade said:
Great! I'll try that, just upoading openrecovery-twrp-2.6.3.0-flo.img to dropbox, just in case I'm able to flash it from download/
Click to expand...
Click to collapse
openrecovery-twrp-2.6.3.0-flo.img is for the WiFi model. TWRP for the LTE model is openrecovery-twrp-2.6.3.0-deb.img.

Username invalid said:
The toolkit is using the command
Code:
fastboot boot openrecovery-twrp-2.6.3.0-deb.img
to temporarily boot it over the stock recovery. Since you unlocked your bootloader manually, you can replace the stock recovery manually too using
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img
Click to expand...
Click to collapse
Where in windows should I paste openrecovery-twrp-2.6.3.0-deb.img, so I can then flash it? It showed up in fastboot devices
EDIT: Nevermind that stupid question

Potetsjokolade said:
Where in windows should I paste openrecovery-twrp-2.6.3.0-deb.img, so I can then flash it? It showed up in fastboot devices
Click to expand...
Click to collapse
C:\Program Files\WugFresh Development
Then in toolkit > Advanced Utilities > Launch CMD Prompt > "fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img"

Username invalid said:
C:\Program Files\WugFresh Development
Then in toolkit > Advanced Utilities > Launch CMD Prompt > "fastboot flash recovery openrecovery-twrp-2.6.3.0-deb.img"
Click to expand...
Click to collapse
Flashed custom recovery + superSU
Thanks guys... Could you help me solve the problem where Nexus 7 wont show up on "my computer"? :laugh:

Potetsjokolade said:
Flashed custom recovery + superSU
Thanks guys... Could you help me solve the problem where Nexus 7 wont show up on "my computer"? :laugh:
Click to expand...
Click to collapse
What do you see if your computer Device Manager with USB Debugging on?

Username invalid said:
What do you see if your computer Device Manager with USB Debugging on?
Click to expand...
Click to collapse
It's connected as MTP, USB Debugging is on, and it does not show up on My Computer as Nexus 7
However, if I connect it as as PTP, it will show up.

Potetsjokolade said:
It's connected as MTP, USB Debugging is on, and it does not show up on My Computer as Nexus 7
However, if I connect it as as PTP, it will show up.
Click to expand...
Click to collapse
I've never had that problem so I can't speak from experience.
http://forum.xda-developers.com/showthread.php?t=2428061&highlight=mtp
http://forum.xda-developers.com/showthread.php?p=44219641#post44219641

Help I bricked my Oneplus 3

Hi, i played around with my new OP3, and i wanted to root it. Since i'm noob at rooting, it went wrong. (i did it with twrp)
So first it just went in to bootloop, then i was still able to get to rcovery and stuff, but i followed a guide to fix bootloop, and that ****ed it even more up. The guide i followedet told me to use "OnePlus3_Unbrick_Tool"
After using "OnePlus3_Unbrick_Tool", i now cant even go into recovery anymore, the only thing i can do is go to bootloader, but when i'm in bootloader now, it wont connect proberly, so that i can use "flash twrp", so that i can use twrp recovery.
Also when i try to boot it, it because of "OnePlus3_Unbrick_Tool" goes into something, where it says "md5 checksum failed", and then restarts and does it again and again.....
I hope it's not bricked forever, pls help ))

have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.

bonham1988 said:
have you tried re-flashing the stock or twrp recovery adb sideload command?
Click to expand...
Click to collapse
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)

Godeske said:
And how do you say I do that? I have tried using the "tool all in one", where you han flash both stock and twrp, but it doesnt seem to do anything, when i press them (and the device is in bootloader)
Click to expand...
Click to collapse
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs

bonham1988 said:
Just boot into bootloader mode and through command prompt check if your phone is detected by typing fastboot devices. If its detected then you flash a new recovery again. Forget the toolkit, just look for instructions on how to install a custom recovery.
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?

Godeske said:
Okay i've tried that now, and it wont allow me unlock my bootloader from command prompt, and i cant do the flash while it's locked.. what to do?
Click to expand...
Click to collapse
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"

Godeske said:
When im in fastboot mode in the bootloader, i can only find it in "device manager" as "marshall london device -> marshall london bootloader interface"
Click to expand...
Click to collapse
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?

ghostofcain said:
Might seem a silly question but what phone are you using? If it is a OnePlus3 have you installed the correct drivers?
Click to expand...
Click to collapse
Pretty sure i have, but i have booked a session with oneplus costumer service now, so that they do it for me live lololol

bonham1988 said:
have you tried re-flashing the stock or twrp recovery with adb sideload command?
if not give it a shot, it might work.
Click to expand...
Click to collapse
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?

gavintoronto2016 said:
Hey bonham,
The same thing happened to me but when I try to sideload it says I need 1.0.32 or higher to sideload this device
What should I do?
Click to expand...
Click to collapse
Adb version is outdated. Just download the latest ones.
Sent from my OnePlus3 using XDA Labs

Hey guys, if there are some of you, who knows a lot about this, would you like to answer this comment? Idk maybe we could use teamviewer to help me or something

simthadim said:
In fastboot mode, did you manage to find your device on the computer? On Linux this is "sudo fastboot devices", on Windows it should be roughly similar.
Click to expand...
Click to collapse
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))

Godeske said:
Ohh i think i understand your question. YEs in command prompt I am able to find the device, it is connected.
(do you know a lot about this, maybe you could teamview me to help?))
Click to expand...
Click to collapse
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Thank you, but i have not enabled "allow oem unlocking" in the developer settings when the phone worked, so i get a error message "FAILED (remote: oem unloc is not allowed)
What to do to unlock it then?

Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..

jaganmohans said:
Bro, download 3.2.4 oos rom zip file from official link. Its around 1.3 GB. Just connect ur OP3 to computer. It will detect as MTP device.Im my computer it was in the name of RAIN Transfer the zip file to internal storage. Wipe cache. And select install option in TWRP and select the zip file u pushed and flash it. Best of luck..
Click to expand...
Click to collapse
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...

simthadim said:
Hey!
I'm not the expert but I have played with my 1+3 enough to have some knowledge.
First of all, do not use "all in one tools", those do not put you in control.
Cool, so fastboot is detected, though you can't get into the recovery?
Step 1) make sure you have the latest version of "fastboot" and "adb" (Android Debug Bridge) and unlock the bootloader. This tread should be helpfull: http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
You need to do this, because otherwise we will not be able to proceed (i.e. the phone is to be 'unlocked' for what we are about to do).
Step 2) If you are ready than let's flash a new recovery (TWRP):
This is also step 2 in the thread mentioned above. Very important: "Once the flash has completed, Don't use the "Fastboot Reboot" Command Instead Unplug Your phone then Manually boot it into recovery by keeping Power + Volume Down button pressed."
So once you have flashed a new recovery using fastboot, than you should reboot your phone into the new recovery!
step 3)
Once in the new recovery (TWRP) go to advanced and to ADB sideload. Make sure your computer detects your device with the command "adb devices" and flash a new ROM. Just for simplicity use the official OOS 3.2.4.
This should do the trick. Before you go and try make sure you understand EVERYTHING I have written. Let me know if you have questions.
Click to expand...
Click to collapse
Hey i have the same problem but this fix does not work for me.
So I have the bootloader unlocked and I can enter the bootload and my computer detects my device which is nice.
when I flash twrp on my phone trough CMD it doesnt work, my PC tells me that everything is okay but my phone will not boot into twrp and instead it will give me weird errors.
---------- Post added at 03:31 PM ---------- Previous post was at 02:56 PM ----------
this fix worked for me,
On the screen when the phone failed to md5 checksum, you've got several partition failed right? in red text.
- download this : https://www.androidfilehost.com/?fid=24591000424942573
and then extract.
- download platform tools attached below. extract in the same folder with first file you've downloaded.
- Boot your phone to fastboot mode, plug your usb, make sure adb and fastboot driver are installed.
- on the folder, hold shift and right click, click open command here
- type fastboot devices
- make sure your serial number appear.
- now flash the img of the missing file according to the partition in red text on your ms5 checksum failed one by one.
- e.g. "fastboot flash boot_aging boot_aging.img.
- make sure you flash all the missing partition.
- type fastboot reboot.
this will boot you to oos 3.1.2.
unfortunately I couldn't extract the newest oos dat. data. but you could always take the OTA
goodluck mate. sorry for my english

Godeske said:
Bro, if just it were that simple, but it's not.. It doesn't find the phone in my computer...
Click to expand...
Click to collapse
Hmm bad try installing all op3 drivers and see whether phone is detected or not. I was in the same situation previously. Pushing zip through adp terminal is painful process. I got device offline first,after solving that i got service not recognized issue. For solving that usb debugging needs to be enabled i stuck in that step.

can you enter recovery trough fastboot mode? I.e. if you are in fastboot mode you van use the volume keys to select recovery.
100% sure you can't enter recovery?
you can try Fast and pro's option. let us know!