I have Korean LG G Pro F240L
everything works alright except that it doesn't fully use it's 3g capabilities
I live in an area where 3G signal is not that stable, usually 2-4 bars, signal can drop for a few seconds every now and then, I use telstra in Australia, which use 850Mhz/2100Mhz 3G network (850 in most areas, 2100 only for extra coverage)
I set the network preference as Auto, the trouble is that most of the time the phone sticks to 2G/GPRS with small icon on the top showing "G",
and if I want to use 3g I have to go to the network setting and change it from auto to "WCDMA only", the network will change to 3g (icon on top showing 3g) with signal strength about 2-4 bars
obviously with unstable 3g signals I can't keep it "WCDMA only" all the time, so I have to change it back to auto.
once it's in auto the phone will not revert to GPRS straightaway, it will keep going with 3g for a while and then if there is a drop of 3g signal it will then change to 2g/gprs and stay that way.
is there anyway to set the phone in "3g preferred" state where 3g is utilized automaticly whenever the internet is needed? (as far as I know, no such option exists).
do you have any trouble with your 3g settings? please share, thanks
I have discovered something new
in the hidden menu-WCDMA service menu-GSM/WCDMA band, when you click on WCDMA 1900 and WCDMA 2100, it shows success, whereas when you click on WCDMA 850 it displays fail
it seems that the phone is not using the stable 850 band at all, rather it relies on the 2100 band, this explains the erratic signal strength
I did a bit more digging
the band frequency for korean providers are
SK (S) 2G (CDMA) 800, 3G (UMTS/HSPA) 2100, 4G (LTE) 850/1800
LG U+ (L) no 2G, 3G (CDMA/EVDO)1800, 4G (LTE) 850/2100
KT (K) no 2G, 3G (UMTS/HSPA) 2100, 4G (LTE) 850/900/1800
also
telstra 2G (GSM/EDGE) 900/1800, 2G (UMTS/WCDMA/HSPA) 850 (main 99% population) /2100 (minor), 4G (LTE) 1800
AT&T (E980) 2G(GSM/GPRS/EDGE) 850/1900, 3G(UMTS/HSPA) 850/1900
strange that there doesn't seem to be direct connection/conflict between telstra bands and the LG U+ bands, i.e. if my F240L is able to use GSM and WCDMA 2100, why not WCDMA 850
I believe G pro is a global phone that supports all communication standards
I am unsure about the root of the problem, is it the matter of settings (i.e. can be solved by tweaking the service menu), or the problem of incompatible radio (hence can be solved by flashing appropriate radio)
also is there anyway to tell the band frequency the phone is using? I did my search and nothing yielded, I believe there is no such solution
my question comes down to how to enable/unlock 850 band on this phone?
If you use AT&T and have a korean phone, do you have similar problem? (as shown above AT&T partly relies on 850 band as well)
also if i guess right the problem is not limited to LG G Pro, any LG Korean phone potentially will have similar issues, I tried search optimus G forum but nothing turned up.
Same problem, korean phone wrong band
angilinmago said:
I have discovered something new
in the hidden menu-WCDMA service menu-GSM/WCDMA band, when you click on WCDMA 1900 and WCDMA 2100, it shows success, whereas when you click on WCDMA 850 it displays fail
it seems that the phone is not using the stable 850 band at all, rather it relies on the 2100 band, this explains the erratic signal strength
I did a bit more digging
the band frequency for korean providers are
SK (S) 2G (CDMA) 800, 3G (UMTS/HSPA) 2100, 4G (LTE) 850/1800
LG U+ (L) no 2G, 3G (CDMA/EVDO)1800, 4G (LTE) 850/2100
KT (K) no 2G, 3G (UMTS/HSPA) 2100, 4G (LTE) 850/900/1800
also
telstra 2G (GSM/EDGE) 900/1800, 2G (UMTS/WCDMA/HSPA) 850 (main 99% population) /2100 (minor), 4G (LTE) 1800
AT&T (E980) 2G(GSM/GPRS/EDGE) 850/1900, 3G(UMTS/HSPA) 850/1900
strange that there doesn't seem to be direct connection/conflict between telstra bands and the LG U+ bands, i.e. if my F240L is able to use GSM and WCDMA 2100, why not WCDMA 850
I believe G pro is a global phone that supports all communication standards
I am unsure about the root of the problem, is it the matter of settings (i.e. can be solved by tweaking the service menu), or the problem of incompatible radio (hence can be solved by flashing appropriate radio)
also is there anyway to tell the band frequency the phone is using? I did my search and nothing yielded, I believe there is no such solution
my question comes down to how to enable/unlock 850 band on this phone?
If you use AT&T and have a korean phone, do you have similar problem? (as shown above AT&T partly relies on 850 band as well)
also if i guess right the problem is not limited to LG G Pro, any LG Korean phone potentially will have similar issues, I tried search optimus G forum but nothing turned up.
Click to expand...
Click to collapse
I got mine yesterday and have the same problem. Is it possible to select the band? mine is the SK version and I need to work with the AT&T band, can I just flash a new radio band? How do I get to the hidden menu?
Thanks!
I have kind of same problem with my f240
i guess if the at&t stock rom could resolve those problems
edit:
service menu:
5457#*240#
hidden menu:
3845#*240#
no
I have since learned that basebands are all hardware encoded, at least for LG phones, and there is no way to enable WCDMA 850 band if it is not originally supported by the phone, flashing the radio will not change the hardware capability of the phone
The Korean LG G pro supports only
2G : 850/900/1800/1900 MHz
3G : 900/2100 MHz
4G, LTE: F240K - 900/1800 MHz (Band 8 & 3) F240S - 850/1800 MHz (Band 5 & 3), F240L - 850/2100 MHz (Band 5 & 1)
I have since change the network provider (who provides 3G on 2100 band), it's not ideal but it's the only solution for me
pls correct my if I am wrong
i have LU6200
inside my house 3G is suck, so i use GSM Only mode, but i only get G signal which mean GPRS i think and it is very slow. How to enable 2G/EDGE so i can get faster internet than GPRS?
Hi, I have F240k the 3G over 900 Mhz band is imposible.. I dont know if my phone is broken or I need flash with any new Kernel or something.. if any one can help to me would be very apreciate
3G over 2100Mhz is nice.
Gprs over 900 Mhz work fine but very very slow.
thank in advance
madridfran said:
Hi, I have F240k the 3G over 900 Mhz band is imposible.. I dont know if my phone is broken or I need flash with any new Kernel or something.. if any one can help to me would be very apreciate
3G over 2100Mhz is nice.
Gprs over 900 Mhz work fine but very very slow.
thank in advance
Click to expand...
Click to collapse
Hi I also have F240K from a week. I can't managed sim to work. Don't have any signal 2G/3G.
I tried most of the methods described here without success (flashing Telcel and Korean rom after, E988HK baseband, changing every setting in the service menu)
Which baseband do you use?
I can't use my new phone and I'm so desperate ;/
Hi, I sell my phone..really have seriously problem with the signal. I remenber that the best option was use the original rom...but anyway the signal was very bad. Sorry man.
Sent from my SM-N9005 using xda app-developers app
You re right. Same problem with e975. I was firced to change the provider to fix it
angilinmago said:
no
I have since learned that basebands are all hardware encoded, at least for LG phones, and there is no way to enable WCDMA 850 band if it is not originally supported by the phone, flashing the radio will not change the hardware capability of the phone
The Korean LG G pro supports only
2G : 850/900/1800/1900 MHz
3G : 900/2100 MHz
4G, LTE: F240K - 900/1800 MHz (Band 8 & 3) F240S - 850/1800 MHz (Band 5 & 3), F240L - 850/2100 MHz (Band 5 & 1)
I have since change the network provider (who provides 3G on 2100 band), it's not ideal but it's the only solution for me
pls correct my if I am wrong
Click to expand...
Click to collapse
i sell the phone, and i will get back to lg
Im in Australia, I cant even get my F240S/L to detect a sim. Ive tried telstra & optus sim.
it doesnt detect any sim.. any advice on what to do.
NOTE:
> i have entered the secret menus & played with some buttons but it does nothing.
> with optus sim installed it can see some networks but doesnt connect, it also still says no sim installed.
> i tried to restore phone back to factory to update to kitkat, but can seem to get the LG phone software tool to work.
any advice?
have the same issue here in my f240l. i cant use my mobile internet, so slow and most of the time no connection even i have a strong signal. btw im from the country of Philippines. anyone can help me please?
I have same problem in india with F240L very slow internet with mobile data. What to do?
Sent from my LG-F240L using XDA Free mobile app
djfunktrip said:
Im in Australia, I cant even get my F240S/L to detect a sim. Ive tried telstra & optus sim.
it doesnt detect any sim.. any advice on what to do.
NOTE:
> i have entered the secret menus & played with some buttons but it does nothing.
> with optus sim installed it can see some networks but doesnt connect, it also still says no sim installed.
> i tried to restore phone back to factory to update to kitkat, but can seem to get the LG phone software tool to work.
any advice?
Click to expand...
Click to collapse
Did you try flashing different basebands?
Thank You
:laugh:
smaybe said:
I have kind of same problem with my f240
i guess if the at&t stock rom could resolve those problems
edit:
service menu:
5457#*240#
hidden menu:
3845#*240#
Click to expand...
Click to collapse
Thanks for your help
my problem is solved with above service menu:laugh:
what did you do ?
khan.28885 said:
:laugh:
Thanks for your help
my problem is solved with above service menu:laugh:
Click to expand...
Click to collapse
Hi Bro,
I am facing same issue regarding Network. I am using stock Jelly Bean 4.1.2 LG G PRO F240L. My Cell is not Rooted
Please tell me what did you do regarding this issue ?
Unstable/Weak phone signals
Singles on my korean LG G Pro are very unstable and after every few minutes my phone shows "Emergency calls only" with an empty signal bar and then suddenly gets full signal back with in few seconds.
I am using custom Android 4.1.2
Same time my signals on my Xperia Z phone with same network remains stable at same place.
Is it a software issues ??
If yes then how I can resolve it ?
Please need your help
khan.28885 said:
:laugh:
Thanks for your help
my problem is solved with above service menu:laugh:
Click to expand...
Click to collapse
Hello,
Could you please share what you have don to resolve the problem? Thanks in advance.
Try This
sunnymodh said:
Hi Bro,
I am facing same issue regarding Network. I am using stock Jelly Bean 4.1.2 LG G PRO F240L. My Cell is not Rooted
Please tell me what did you do regarding this issue ?
Click to expand...
Click to collapse
if your phone is not rooted then try following
in dial pad
service menu:
dial this 5457#*240# then go network mode is select which you want to prefer then phone reboot automatic and you are done
hidden menu:
3845#*240#
f240k lte issue
Rădulescu said:
i sell the phone, and i will get back to lg
Click to expand...
Click to collapse
Hello i was using 4g lte on my f240k smoothly, than i updated to lollipop my imei was gone and afterwards i again downgraded to kitkat but problem is 4g lte is now nit working for which i downgraded
Now my carrier also saying handset is not compatible. But previously i have used 4g lte on this same device.
Your expertise required in this regard.
I purchased the newly released UMI X2 Android phone. I am unable to use the TMobile 3G network. I am only able to use 2G/EDGE.
Voice and data quality are very bad, almost the phone is unusable. I spoke with T-Mobile and was informed that my modem does not support 1700 MHz and there are effort to re-farm TMobile network to support 3G on 1900Mhz but not set date yet. When I scan for available network I get three networks were available
T-Mobile 2G
AT&T 3G
AT&T 2G
Operating System: Android 4.2.1 OS
Processor: 1.2GHz MTK MT6589 quad-core processor
Connectivity Technology: GSM network & WCDMA - Standard SIM card
Network Band: GSM 850/900/1800/1900 MHz & WCDMA 850/2100MHz
Data Technology: GPRS, EDGE, HSPA
Baseband version
MOlY.WR8.W1248.MD.WG.MP.V2.P1
I would appreciate any help to get my phone to work on 3G.
YAF said:
I purchased the newly released UMI X2 Android phone. I am unable to use the TMobile 3G network. I am only able to use 2G/EDGE.
Click to expand...
Click to collapse
Did you make any progress with this? I recently purchased UMI X2, for use with T-Mobile UK. But have the same problem of not being able to connect to 3G networks - it works okay on 2G/EDGE.
I know the phone supports 3G on 2100MHz, and there's been some debate whether it supports 850/900MHz as well, but I've not found a definitive answer to that.
There's an operator in the UK (Hutchinson 3G UK Ltd) that only have a license for 2100MHz. So I was expecting the phone to work fine on their network- but no go... phone won't register on network at all - even though it shows in the available networks list.
I'm now searching to see if anyone else has been having problems - as it's beginning to look like faulty phone hardware - rather than trying to use unsupported frequencies...
acid meaand
I am still in the same situation, I am unable to use the 3G network for T-Mobile.
I am looking into getting 4G Wireless Hotspot modem $50 from the same carrier, use my SIM card on the modem, and use my UMI X2 as pure IP phone. There are many issues, but it looks promising.
Please keep me updated with any progress you make.
Regards;
I have the same problem...
I have this same problem with a operator here in Brazil. Every 3G operator in Brazil, using 2.1GHz band, works fine except one: VIVO.
I can see the network when I click on "manual search", but the phone can't connect. My baseband is:
moly.wr8.w1248.md.wg.mp.v7.p1 2013/04/10 00:39
How can change this baseband to another? I tried to update firmware but unfortunately the newest firmware has the same baseband version.
firmware update will not solve the problem
Firmware update will not solve the problem. Until the manufacture identifies the problem and provides a solution, the problem is outstanding.
Beside the hardware has to be compatible and can support more frequencies which no one can confirm for the UMI or any other chines unlocked phones.
But, this is just my humble opinion.
I Found a solution (at least for me)
I think I found a solution for my problem. I flashed this very new (2013/07/17) rom, with a new baseband MOLY.WR8.W1248.MD.WG.MP.V7.F2.P1, 2013/07/10 23:14 that corrects 3G dropouts and disconnects. Now my 3g works find, with H and sometimes H+. Fast and reliable like it should be. The link for this new ROM is:
http://www.needrom.com/mobile/umi-x2-based-official-for-europeus/
Thanks for the update.
I have two questions.
1- There are two files in the link you provided UMI-X2-basedon_Official_250613.zip and UPDATE_UMI-X2-THB-ROM-based_on_Official_170713.zip. Which do use?
2- You mentioned the updated corrected 3G dropouts and disconnects, but do you know if the update have these frequencies to get 3G?
3G (850, 900, 1700, 1900, 2100 MHz)
HSPA+ 42
P.S
GSM/EDGE/GPRS (850, 900, 1800, 1900 MHz) original specs
YAF said:
Thanks for the update.
I have two questions.
1- There are two files in the link you provided UMI-X2-basedon_Official_250613.zip and UPDATE_UMI-X2-THB-ROM-based_on_Official_170713.zip. Which do use?
2- You mentioned the updated corrected 3G dropouts and disconnects, but do you know if the update have these frequencies to get 3G?
3G (850, 900, 1700, 1900, 2100 MHz)
HSPA+ 42
P.S
GSM/EDGE/GPRS (850, 900, 1800, 1900 MHz) original specs
Click to expand...
Click to collapse
I used the file UPDATE_UMI-X2-THB-ROM-based_on_Official_170713.zip. It was based on the Official ROM from 07/17/2013, but I was unable to find the official stock version. This version has a very new bandbase that, supposedly, fixed the problem with 3G on some operators.
3G on Brazil is on 2100 MHz, sometimes on 850MHz but in my case the problem was on 2.1GHz band. Three WCDMA operators in Brazil, all in the same 2.1GHz frequency, work fine, but VIVO doesn't. Now, with the new rom, it works with no drop outs for over a day now.
no changes or additional frequencies
I successfully applied the update but no changes or additional frequencies
I have serious issues with HSDPA, t-mobile uk works but only on GPRS and it keeps dropping out. GiffGaff seems to work without dropping out. It has worked for a minute on HSDPA today but only once. Other than that t-mobile has been dropping out badly. GPRS works for a bit then it drops out. I have took an MTK modem log with MobileUncle Tools to see what it says but haven't looked at it yet. Trying to work out if it is a hardware issue or Baseband.
I get this from my X2 Radio Logcat:
https://www.friendpaste.com/2ltEW0wuHjzkDZiRQb9m7g
hi everyone, i have UMI X2 and i repair the bad gsm signal, i put to gsm connector Cu wire and signal now working very good!!!!!! sorry for my english i am from slovakia
:victory:
00alkskodi00 said:
hi everyone, i have UMI X2 and i repair the bad gsm signal, i put to gsm connector Cu wire and signal now working very good!!!!!! sorry for my english i am from slovakia
:victory:
Click to expand...
Click to collapse
Hi,
do you have a description and a photo of how you did it?
How long the Cu wire has to be? And where to connect it?
Many thanks in advance.
Can somebody tell me the difference between Wcdma and Utms frequencies ?. Im moving to France and will be with Free mobile there, they send there signal on Utms 900 and 2100 mghz, so will a phone that says wcdma 900 2100 work ? im thinking of buying a Chinese android phone, I had a lg and have now sold it.
Califmike33 said:
Can somebody tell me the difference between Wcdma and Utms frequencies ?. Im moving to France and will be with Free mobile there, they send there signal on Utms 900 and 2100 mghz, so will a phone that says wcdma 900 2100 work ? im thinking of buying a Chinese android phone, I had a lg and have now sold it.
Click to expand...
Click to collapse
You may get a faster result, asking the above question here - http://forum.xda-developers.com/general/help
As this section is for the LG OG and not general Q&A
Hope this helps
Califmike33 said:
Can somebody tell me the difference between Wcdma and Utms frequencies ?. Im moving to France and will be with Free mobile there, they send there signal on Utms 900 and 2100 mghz, so will a phone that says wcdma 900 2100 work ? im thinking of buying a Chinese android phone, I had a lg and have now sold it.
Click to expand...
Click to collapse
UMTS (Universal Mobile Telecommunications System) it a WCDMA ( Wideband Code Division Multiple Access) implementation.
A chinese phone with 900/2100 WCDMA will work perfect for you.
LG OG 975 would also get you 2600 LTE that will boost your network speed.
Hi, I'm having a problem with my new HTC6500LVW from Verizon.
Almost everything works good, except for the 4G/3G connection. I'm in México and my service is provided by Telcel, they use the band AWS-1 (1700Mhz upload and 2100Mhz download) for LTE, but the problem is that I found that Verizon use 700Mhz band to provide this 4G service.
I' have already configure the APN with the specifications indicated by Telcel, but nothing... All I get is EDGE connection.
My question is... Is there a way to... unlock or add this band (AWS-1) to make it compatible with the service proided here in México???
Thanks in advanced!
Sadly, no. The hardware doesn't support it. As for 3G (HSPA if it is GSM) the phone only supports certain frequencies from the website, it appears to be 900 and 2100 mhz.
http://www.htc.com/us/smartphones/htc-one-m7/
Sent from my HTC6500LVW using XDA Free mobile app