Anybody managed to get Opera VPN working on Fire TV (unrooted) - Fire TV Themes and Apps

Opera recently released an android app of their VPN service. Have managed to side load it and get it to load but get stuck on a confirmation dialogue from the fire tv asking to allow the vpn access. Tried mouse, keyboard but have had no luck. Any help would be appreciated
Thanks
The App In Question
https://play.google.com/store/apps/details?id=com.opera.vpn&hl=en_GB

Got this step working using the remote to select OK.
But then, while VPN is connected, the FireTV don't seem to detect an active Internet connection.

Will have to try and give it another go. I tried with keyboard, mouse and remote and it wouldn't press it.
Strange how it's not detecting connection. Thought it would be the same as any other vpn app. I tried ipvanish not to long ago which worked perfect straight from the app.

Managed to get it to work in the end. Used remote as emc2cube suggested (thanking you) and got it to confirm settings. Also I have it on both wired and wireless boxes (fire tv 2) and both are working perfectly. What's better than a free VPN.

Good to know it worked for you.
I don't know why mine don't detect the network while running then.
Between the fact that mine is a stick, I'm currently abroad and the WiFi is pretty poor that's a lot of possibilities.

I am obviously too stupid. I installed the app on my fire tv 1st gen and am stuck at the very same point. I click the, what I assume, is the okay button on the Amazon remote but nothing happens. Did you use another remote?

You have to use the "arrow buttons" of the remote until the OK is selected (orange) on the pop up, then you can use the OK/select button of the remote to validate.

I can pass the first dialog, then there are 5 nag screens with the last one has the Olaf viking on top in the middle it says "You're Set" and bottom right "GOT IT". Whatever I click, I can't select the GOT IT and nowhere I see an OK button. Where is that located? And I don't get a popup. PS: I installed latest firmware.

For that you must use a BT mouse. Fortunately once it's set up you only need the remote to connect. (Even if it still not working for me on the Stick :/ )

BT mouse? USB mouse won't work? Then hopefully an Apple mouse works

My bad, I'm still thinking for the stick (where the apple mouse is actually working).
USB mouse will do it for you.

Thanks! I am up and running live tv

Related

[Q] Paired bluetooth mouse suddenly won't connect anymore

Hey guys, new to the forum.... sideloaded the Settings.apk last night and was able to pair a motorolla BT mouse no problem. Used it all last night.
Came home today and the Fire TV was frozen, so I reset it, now the mouse isn't connecting.
When I go into the Settings app, it still shows it in the list but it doesn't say 'Connected' under the name like it does for the Fire remote.
Clicking on it in the list does nothing. I wish there was some way to tell it to forget that device but I'm not seeing any way.
I've tried uninstalling the Settings.apk but when I reinstall, the mouse is still listed as a device that has already been recognized.
I've checked the mouse batteries, and even took it upstairs and paired it with my computer to make sure it still worked.
Any ideas on how I can get it back?
***
PS Mods - Sorry for posting this in two forums, I think the first post was not placed in the right area to get help.
The only thing that helped me (for the stick though) was doing a factory reset. After that I could add it back and connect.
phillip.r said:
Hey guys, new to the forum.... sideloaded the Settings.apk last night and was able to pair a motorolla BT mouse no problem. Used it all last night.
Came home today and the Fire TV was frozen, so I reset it, now the mouse isn't connecting.
When I go into the Settings app, it still shows it in the list but it doesn't say 'Connected' under the name like it does for the Fire remote.
Clicking on it in the list does nothing. I wish there was some way to tell it to forget that device but I'm not seeing any way.
I've tried uninstalling the Settings.apk but when I reinstall, the mouse is still listed as a device that has already been recognized.
I've checked the mouse batteries, and even took it upstairs and paired it with my computer to make sure it still worked.
Any ideas on how I can get it back?
***
PS Mods - Sorry for posting this in two forums, I think the first post was placed in the area to get help.
Click to expand...
Click to collapse
You must press on the bluetooth icon on the right side next to the name of your mouse, then you will have the option to unpair your mouse, and then you can pair it again.
To do so, you must install an app on your android phone which is called Wukong Remote, and use the touchpad mode, which will act like your mouse and then you can do the steps and unpair your mouse.
I had kinda the same problem, but it was with a USB mouse. I used the mouse for about a week, then the Fire TV froze, and the mouse never connected again. Not only did it not connect, it would not connect to any other device I have either. When I put the dongle in my PC it shows there is a dongle, but the firmware for the dongle was somehow erased. It has never happened to any other donlges I have, but I still worry that it could.
dbdoshi said:
The only thing that helped me (for the stick though) was doing a factory reset. After that I could add it back and connect.
Click to expand...
Click to collapse
Yeah i'm afraid that's what's going to have to happen
smaghraby said:
You must press on the bluetooth icon on the right side next to the name of your mouse, then you will have the option to unpair your mouse, and then you can pair it again.
To do so, you must install an app on your android phone which is called Wukong Remote, and use the touchpad mode, which will act like your mouse and then you can do the steps and unpair your mouse.
Click to expand...
Click to collapse
I would def. try this if I had an android phone, but I have an iPhone. Been looking for a mouse app for it but haven't had much luck.
Yes, doing factory reset was painful. But I learned my lesson, I don't unpair my BT keyboard/mouse from the stick or try to use it with any other device.
Also, not really answering your Q, but you can install the Amazon FTV app on your iPhone ( https://itunes.apple.com/us/app/amazon-fire-tv-remote/id947984433 ) and use that to toggle your BT settings (I tried that and it didn't help me). Its an option if you don't want to use a third party app (you can also send commands for control selection in your FTV for movements through adb, AFTVNews.com has a guide)
phillip.r said:
Hey guys, new to the forum.... sideloaded the Settings.apk last night and was able to pair a motorolla BT mouse no problem. Used it all last night.
Came home today and the Fire TV was frozen, so I reset it, now the mouse isn't connecting.
When I go into the Settings app, it still shows it in the list but it doesn't say 'Connected' under the name like it does for the Fire remote.
Clicking on it in the list does nothing. I wish there was some way to tell it to forget that device but I'm not seeing any way.
I've tried uninstalling the Settings.apk but when I reinstall, the mouse is still listed as a device that has already been recognized.
I've checked the mouse batteries, and even took it upstairs and paired it with my computer to make sure it still worked.
Any ideas on how I can get it back?
***
PS Mods - Sorry for posting this in two forums, I think the first post was not placed in the right area to get help.
Click to expand...
Click to collapse
I bought a BT mouse but it was very slow and not accurate on my fire tv stick. It worked well on my phone and pc.
Does your mouse work good on the fire tv?

[Q] FTV 1.5 update knocked out keyboard/mouse functionality

Anyone else with sideloaded apps experience their key/mouse not working since the 1.5 update? (IE: Xfinity TV Go / HBO Go, all of the "must-have-a-keyboard-and-mouse" apps). Same goes for Firefox and Chrome, browser ability. Now it has signed me out of TV Go / HBO / other sideloaded (content) apps and will NOT allow me to access the login fields to even get back in.
I'm able to open the app(s), but the mouse buttons do nothing when trying to select something / menus and I'm often unable to esc out. Also, I've noticed almost all of the old key command abilities (alt+tab, FN+down, etc) are completely disabled machine-wide.
What the hell happened and how do I repair this? I purchased FTV over other set-top devices specifically for these certain apps. I could've just used my playstation if I wanted an expensive Netflix player.
(Important to know: I'm NOT rooted and using a Logitech K400 USB key/mouse.)
Not me
anyone else?
My Logitech K400 works great on the 1.5 update
sacwoo said:
My Logitech K400 works great on the 1.5 update
Click to expand...
Click to collapse
It still works great - just not on any app that REQUIRES a mouse and keyboard, like TV Go and HBO Go / Chrome, Firefox, etc. You're not having problems with apps not natively supported by the stock Fire remotes?
Is USB Debugging turned on? If so, turn it off.
Sizzlechest said:
Is USB Debugging turned on? If so, turn it off.
Click to expand...
Click to collapse
Good suggestion - however, it is off.
I guess I can summarize it as the mouse buttons do nothing machine-wide. Every app that previously accepted mouse-click input no longer does. Are you guys still able to click things?
Also, I can tab between input fields (username, password, etc) to type, but tabbing to the "submit" or "done" (etc) button and hitting enter doesn't react either.
Everyone: I've figured it out and it's now a totally different (albeit more concise) issue.
Someone on another message board said this:
Was your USB mouse/keyboard connected when the Fire TV updated?
I have read reports that the update killed the USB mouse/keyboard drivers if they were connected to the Fire TV during the update.
I have also read some people have been able to re-install the driver but not sure.
After I read about this problem, I took my USB mouse/keyboard out of my Fire TV before I got the update. I did get the update recently but I haven't hooked my USB mouse/keyboard back up yet. I will try it tonight and see if it still works though.
Click to expand...
Click to collapse
I swapped out the K400 hub for my wireless Logitech mouse I use on my desktop computer and sure enough, works like a dream again.
It was totally a driver thing. Well.. now I either need to get a new key/mouse combo that'll function correctly or learn how to reinstall the drivers for the K400.
Obviously, the easy way out is to buy a new combo and get rolling right away - but how would I go about the proper way (reinstalling mouse drivers to the Fire TV)?
Do you have to be rooted to reload mouse drivers, or is that something that can be sideloaded in?
kylebrauch said:
Everyone: I've figured it out and it's now a totally different (albeit more concise) issue.
Someone on another message board said this:
I swapped out the K400 hub for my wireless Logitech mouse I use on my desktop computer and sure enough, works like a dream again.
It was totally a driver thing. Well.. now I either need to get a new key/mouse combo that'll function correctly or learn how to reinstall the drivers for the K400.
Obviously, the easy way out is to buy a new combo and get rolling right away - but how would I go about the proper way (reinstalling mouse drivers to the Fire TV)?
Do you have to be rooted to reload mouse drivers, or is that something that can be sideloaded in?
Click to expand...
Click to collapse
There are no "drivers" to install or reinstall. The USB input drivers are part of the kernel. Having something plugged in or not plugged in while doing the update has no effect on them.
rbox said:
There are no "drivers" to install or reinstall. The USB input drivers are part of the kernel. Having something plugged in or not plugged in while doing the update has no effect on them.
Click to expand...
Click to collapse
Well I just purchased a Logitech MK520 key & separate mouse combo and functionality is completely restored. Everything works as it used to.
My old K400 works perfectly fine on any other device I use it with.. what happened? why does THIS logitech device suddenly work but my old one lost FTV capability?

Directv and wukong apps not completley working

I am able to upload the apps to the fire stick but cannot seem to open them completely. I downloaded the wukong remote app, have a bluetooth keyboard hooked up to my Samsung un65h7150 which seems to have a pretty fast processor and also have the directv tablet app on the stick as well. I can sign in with directv but have great difficulty navigating with fire stick remote and the keyboard as well. I can get as far as highlighting a channel but to open it up never happens- no enter buttons work neither on the wukong 'try now'
Any help would be appreciated.
QUOTE=vulcan195;63789983]Does this work on the latest Fire TV box running Fire OS 5?[/QUOTE][/QUOTE]
tjmethod said:
I am able to upload the apps to the fire stick but cannot seem to open them completely. I downloaded the wukong remote app, have a bluetooth keyboard hooked up to my Samsung un65h7150 which seems to have a pretty fast processor and also have the directv tablet app on the stick as well. I can sign in with directv but have great difficulty navigating with fire stick remote and the keyboard as well. I can get as far as highlighting a channel but to open it up never happens- no enter buttons work neither on the wukong 'try now'
Any help would be appreciated.
QUOTE=vulcan195;63789983]Does this work on the latest Fire TV box running Fire OS 5?
Click to expand...
Click to collapse
[/QUOTE][/QUOTE]
You need to side-load the app to your phone or tablet, open app and connect to your Firestick IP, once connected It will automatically install the wukong app on your firestick . Once you see the app under your main\apps you are good to go.
Hi thanks I thought it just wasn't completely compatible. I did download the 'appstofire', app from GP, opened it up after I had the wukong and direct tablet already downloaded (from gp) and then opened the appstofire app, selected those apps to upload then got an error to select setup. I then put in my IP and then was able to upload or transfer the wukong and directv apps to the stick. So you're saying they need to be sideloaded instead of how I'm doing it- I did see an app called fire tv stick side load app somewhere on here- I'll try that when I get in- hopefully this works since the 'appstofire' app didn't - thanks for your help :good:
Uninstall sideloaded apps. Go to playstore and download wukong app on your phone\tablet, lunch it and search for your box IP,select it and will attempt to connect, once connected it will automatically install wukong app on your fire TV. When this is all done you should be able to see the pointer on your screen and navigate through using your preferred type of build in modes ( touchpad, dpad, mouse or keyboard)
Hi not sure what I am doing wrong but once uninstalling the apps from the firestick and downloading the wukong app for 'kodi' instead of any other then launching it and selecting ip, it asks last 2 numbers which I put in and hit search and I get no device found which dosen't make sense. I have unkown sources on and usb degug on set, it tries to initialize but fails and says 1 minute to resolve but goes to a tutorial troubleshoot page without connecting?
bula1ca said:
Uninstall sideloaded apps. Go to playstore and download wukong app on your phone\tablet, lunch it and search for your box IP,select it and will attempt to connect, once connected it will automatically install wukong app on your fire TV. When this is all done you should be able to see the pointer on your screen and navigate through using your preferred type of build in modes ( touchpad, dpad, mouse or keyboard)
Click to expand...
Click to collapse
Hi I know what you were explainging was a pretty simple, quick access to the application but I seem to be experiencing a problem connecting to it on my firestick. Once installing the app on my phone for example and then trying to access it on the stick, it shows ‘smart tv’ which is checked and ‘my devices’ which has a rectangular green box that is labeled ‘connect’ but not ‘firetv’. When tapping ‘connect', I get ‘initializing’ then failed to initialize showing the troubleshooting page suggesting developer options and usb debugging which are all on. The only other problem that I thought may be the issue was having all connections the same which they are now on the same wifi extender that has the best signal. This didn’t change anything. I then checked the IP address on the firestick which is 192.168.1.12 and it when hitting ‘Input IP to search’, it asks for the last 2 digits but when entering the 12, I quickly get ‘no devices found please try again. I then checked the IP on my tv and found its IP’s last 2 digits are 22 not 12 which I don’t see how I would change these or even if this would be the problem since it is the firestick that I am trying to get recognized. Besides, even though ‘smart tv’ shows up in the ‘New Devices’, Wukong is not functional with the actual tv either. The other suggestion they give was to install the server onto the tv but once copying that fires on to a flash drive then plugging it into my Samsung smart tv, I cant even access the file on the tv.
If you or anyone can shed any light on my situtuation - it would be appreciated
[/QUOTE]
You need to side-load the app to your phone or tablet, open app and connect to your Firestick IP, once connected It will automatically install the wukong app on your firestick . Once you see the app under your main\apps you are good to go.[/QUOTE]
I'm also stuck
When I use Wukong Remote, it doesn't detect my Fire TV. I have ADB debugging and Unknown Source both on. Might there be another setting I am missing so my Firestick can be detected?

Help loading settings.apk on fire stick

Hi i have downloaded the Amazon Fire TV Utility App and i have added the ip from the Amazon Fire stick and CMD came up saying it had connected, i have then tried to load the settings.apk using the Amazon Fire TV Utility App but all i am getting is a CMD with this in it error: device offline followed by -waiting for device-
The Fire Stick is turned on and i have tried turning off my firewall and still the same problem.
Hi I managed to get it installed on the Fire Stick by running Amazon FireTV Utility App as administrator, i can now see the settings app on the fire stick and when i launch it i can see the Bluetooth option but if i click on it the app just closes it does this on what ever option i click in the settings app.
I am assuming you are on OS5.
Make sure you have the proper IP address (in FireTv Utilities app settings) for your box/stick then go in Settings/ Developer Options/and turn off and on ADB debugging two ot three times ....should work now.
Thank you for your reply i tried what you recommended but it still launches and then closes as soon as you select an option.
I'm also seeing the same thing. I've installed the settings.apk, but everytime I click on any entry, it kicks me out...
why do you need this settings.apk? what are you needing to change / use it for?
I have loaded Kodi on my fire stick and some of the apps require mouse support to navigate so i want to buy a bluetooth air mouse and all tutorials say you need to load the settings.pka and use the bluetooth options from with in that.
meanman1967 said:
I have loaded Kodi on my fire stick and some of the apps require mouse support to navigate so i want to buy a bluetooth air mouse and all tutorials say you need to load the settings.pka and use the bluetooth options from with in that.
Click to expand...
Click to collapse
You don't need it.
FireOS 5 has better bluetooth support.
Here is my pairing of my Apple MagicTrackpad to the FireTV Stick (note the MagicMouse from 08 will not pair - Apple issue)
You can see me pair, pin is 0000, and the mouse cursor is that smallish circle in Kodi. The stock launcher has no mouse support, but FireStarter does.
Hi so all i need to do is get a Apple MagicTrackpad and it will work ?
meanman1967 said:
Hi so all i need to do is get a Apple MagicTrackpad and it will work ?
Click to expand...
Click to collapse
I'm sure there are better Bluetooth nice to use. I just paired what is laying around. The drivers that the firetv has don't support tap to click on it so I have to click the touch pad which isn't easy unless it's on a table.
You will likely be able to use almost any Bluetooth mouse with the firetv.
I wouldn't recommend the apple trackpad for firetv usage.
The android mouse toggle app has worked well enough for me that I don't even bother with pairing a mouse.
Hi i just got the Mouse Toggle app and it finds my Amazon stick and connects everything is enables and at the bottom it says status started but on my phone it just says done at the bottom and there is no controls or anything. I have enclosed a screen shot. Thanks again for your help.
Thank you i have it all working great now.

Fire TV stick - is there any way to pass initial "remote pair" step?

Hello Developers!
I got a problem and I hope some of you can help me (if not you then i don't know who). I have Fire TV stick 2 gen for about 2 years and recently my remote stopped working. I installed amazon TV app on my cellphone to get back control of the stick. Then I tried everything I was able to find on the Internet (new batteries, hold home button for 5-10-20 sec, find new BT device from the settings menu, etc.) to bring back to life original remote but there was no luck. So I decided to reset the stick back to factory settings (bad idea). As you can guess now I have the stick that is asking me to pair my (probably dead) remote with it (!).
I don't have friends with amazon TVs and I don't want to pay $20 for the new remote ( when the new stick with remote is like $30 ) I'm ok to use the app.
So I have three questions for you guys:
1) Is there any way to skip the first step (initiation of remote)? Maybe I can find some kind of firmware that I can change a little bit
(put my wifi settings and tell to skip 1st step) and flash it into my stick? IDK...
2) As I understand the original remote works on BT not on WIFI so Is there any app that uses BT and can be recognized as an amazon tv remote on that 1st step. Two apps I've tried (amazon tv app and CetusPlay) use WIFI.
3) Is there any way to check if my remote still live or completely dead? (Again I have no friends with amazon TVs)
Thanks for any input!
No ideas guys? Any?
I think you actually need a remote for first time boot :/ I don't think there is any app out there that emulates the remote, I could be wrong but have you tried this?
https://www.youtube.com/watch?v=amjs5hGXqbs
I have exactly the same issue. I don't know if my remote is working or not.
I managed to connect a usb keyboard and stupidly reset the thing to defaults - disabling developer mode in the process.
Now I have a firestick that keeps asking me to "pair the remote..."
Is there any way to enable adb ?
in this thread.. ( https://forum.xda-developers.com/fire-tv/development/unlock-fire-tv-stick-2nd-gen-tank-t3907002 ) I remember reading about shorting a pin inside the unit to ground, would this allow adb access?
tbird635 said:
I have exactly the same issue. I don't know if my remote is working or not.
I managed to connect a usb keyboard and stupidly reset the thing to defaults - disabling developer mode in the process.
Now I have a firestick that keeps asking me to "pair the remote..."
Is there any way to enable adb ?
in this thread.. ( https://forum.xda-developers.com/fire-tv/development/unlock-fire-tv-stick-2nd-gen-tank-t3907002 ) I remember reading about shorting a pin inside the unit to ground, would this allow adb access?
Click to expand...
Click to collapse
I want to say I'm fairly certain I was able to skip the pairing with a USB keyboard. Although I don't remember what key I pressed.
My remote stopped too. I stretched out the springs and reinstalled the batteries. Works great now.
Did you have any luck solving this Bartyman?
with a usb keyboard i was able to use play button to bypass
I reset my device using TWRP, and cannot get pass the "pair remote" screen! Help!? Would buying a otg cable and using a usb keyboard help? or is that a waste of money?
KINDLE FIRE MURDERER said:
I reset my device using TWRP, and cannot get pass the "pair remote" screen! Help!? Would buying a otg cable and using a usb keyboard help? or is that a waste of money?
Click to expand...
Click to collapse
buying a OTG is very useful, almost any keyboard/mouse will work. makes TWRP easier also. holding down the home button for about 10 seconds has worked for me when trying to pair the remote. I dont know if you can do anything to get by it with CEC using the TV remote.

Categories

Resources