[Q] FTV 1.5 update knocked out keyboard/mouse functionality - Fire TV Q&A, Help & Troubleshooting

Anyone else with sideloaded apps experience their key/mouse not working since the 1.5 update? (IE: Xfinity TV Go / HBO Go, all of the "must-have-a-keyboard-and-mouse" apps). Same goes for Firefox and Chrome, browser ability. Now it has signed me out of TV Go / HBO / other sideloaded (content) apps and will NOT allow me to access the login fields to even get back in.
I'm able to open the app(s), but the mouse buttons do nothing when trying to select something / menus and I'm often unable to esc out. Also, I've noticed almost all of the old key command abilities (alt+tab, FN+down, etc) are completely disabled machine-wide.
What the hell happened and how do I repair this? I purchased FTV over other set-top devices specifically for these certain apps. I could've just used my playstation if I wanted an expensive Netflix player.
(Important to know: I'm NOT rooted and using a Logitech K400 USB key/mouse.)

Not me

anyone else?

My Logitech K400 works great on the 1.5 update

sacwoo said:
My Logitech K400 works great on the 1.5 update
Click to expand...
Click to collapse
It still works great - just not on any app that REQUIRES a mouse and keyboard, like TV Go and HBO Go / Chrome, Firefox, etc. You're not having problems with apps not natively supported by the stock Fire remotes?

Is USB Debugging turned on? If so, turn it off.

Sizzlechest said:
Is USB Debugging turned on? If so, turn it off.
Click to expand...
Click to collapse
Good suggestion - however, it is off.
I guess I can summarize it as the mouse buttons do nothing machine-wide. Every app that previously accepted mouse-click input no longer does. Are you guys still able to click things?
Also, I can tab between input fields (username, password, etc) to type, but tabbing to the "submit" or "done" (etc) button and hitting enter doesn't react either.

Everyone: I've figured it out and it's now a totally different (albeit more concise) issue.
Someone on another message board said this:
Was your USB mouse/keyboard connected when the Fire TV updated?
I have read reports that the update killed the USB mouse/keyboard drivers if they were connected to the Fire TV during the update.
I have also read some people have been able to re-install the driver but not sure.
After I read about this problem, I took my USB mouse/keyboard out of my Fire TV before I got the update. I did get the update recently but I haven't hooked my USB mouse/keyboard back up yet. I will try it tonight and see if it still works though.
Click to expand...
Click to collapse
I swapped out the K400 hub for my wireless Logitech mouse I use on my desktop computer and sure enough, works like a dream again.
It was totally a driver thing. Well.. now I either need to get a new key/mouse combo that'll function correctly or learn how to reinstall the drivers for the K400.
Obviously, the easy way out is to buy a new combo and get rolling right away - but how would I go about the proper way (reinstalling mouse drivers to the Fire TV)?
Do you have to be rooted to reload mouse drivers, or is that something that can be sideloaded in?

kylebrauch said:
Everyone: I've figured it out and it's now a totally different (albeit more concise) issue.
Someone on another message board said this:
I swapped out the K400 hub for my wireless Logitech mouse I use on my desktop computer and sure enough, works like a dream again.
It was totally a driver thing. Well.. now I either need to get a new key/mouse combo that'll function correctly or learn how to reinstall the drivers for the K400.
Obviously, the easy way out is to buy a new combo and get rolling right away - but how would I go about the proper way (reinstalling mouse drivers to the Fire TV)?
Do you have to be rooted to reload mouse drivers, or is that something that can be sideloaded in?
Click to expand...
Click to collapse
There are no "drivers" to install or reinstall. The USB input drivers are part of the kernel. Having something plugged in or not plugged in while doing the update has no effect on them.

rbox said:
There are no "drivers" to install or reinstall. The USB input drivers are part of the kernel. Having something plugged in or not plugged in while doing the update has no effect on them.
Click to expand...
Click to collapse
Well I just purchased a Logitech MK520 key & separate mouse combo and functionality is completely restored. Everything works as it used to.
My old K400 works perfectly fine on any other device I use it with.. what happened? why does THIS logitech device suddenly work but my old one lost FTV capability?

Related

[Q] Fire TV XBox 360 Wireless Receiver Third Party

Hallo everyone,
I'm new in this forum and I hope I am right here.
So the Fire TV is new in Germany and I preordered it.
It would be fine if I will be able to use my wireless Xbox 360 Controller with it.
I have read that it is possible to use the original wireless receiver for PC.
But what's about the remake from it (the version from China)? For PC I have to install the drivers manually.
Is it possible to use? Has somebody tried it?
For example like the "White PC USB Gaming Receiver Adapter White For Xbox 360 Wireless Controller" on amazon.com
Sorry I'm not allowed to post links.
Thanks!
McDin1988 said:
Hallo everyone,
I'm new in this forum and I hope I am right here.
So the Fire TV is new in Germany and I preordered it.
It would be fine if I will be able to use my wireless Xbox 360 Controller with it.
I have read that it is possible to use the original wireless receiver for PC.
But what's about the remake from it (the version from China)? For PC I have to install the drivers manually.
Is it possible to use? Has somebody tried it?
For example like the "White PC USB Gaming Receiver Adapter White For Xbox 360 Wireless Controller" on amazon.com
Sorry I'm not allowed to post links.
Thanks!
Click to expand...
Click to collapse
Hello
Yes, i have one from ebay (chinese clone) and it works fine. Lights in the controller doesn´t light up as usually but that happens with the official receiver also.
Hey,
I'm using a knockoff chinese receiver. I got mine on amazon for about 13 USD and it works great. It can be a little tricky to configure the controls with Mupen 64 or whatever emulator you are using, and the 'x' home key always takes you back to the games section of the kftv launcher (despite having xbmc set as the launcher, for example), but it works in game just fine.
Let me know if you have any questions- I'd be happy to help.
Can you connect more than one Controller on that adapter? I read, that 4 Controller + 4 headsets are possible with this adapter (on a PC). Whould be nice for multiplayer games...
Gesendet von meinem GT-I9295 mit Tapatalk
I haven't tried headsets, but I've used at least two controllers at once, and I also understand up to 4 per receiver works (theoretically more receivers = more players, but I'm not buying another one to test that theory).
How to hook up third party controllers correctly
I was searching the web up and down in order to get my third party controller (china) to work without a solution. Actually it was easier than I thought:
- connect the dongle
- restart the Fire TV (5 sec hold of Play+Big Button)
- press X on controller
The controller doesn't stop blinking but if you are able to navigate through menus everything worked well.
I bought this receiver from amazon (www (dot) ebay (dot) com/itm/271687378076?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT) and it's not working when I plug it into the Fire TV. I believe the receiver works though because when I plugged it into my mac and I was able to see all the keys responding using 360Controller.
Everybody seems to have minimal issues connecting controllers to their Fire TV. Any ideas?
(Sorry, I don't have enough posts to post links.)
ilovexd said:
I bought this receiver from amazon (www (dot) ebay (dot) com/itm/271687378076?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT) and it's not working when I plug it into the Fire TV. I believe the receiver works though because when I plugged it into my mac and I was able to see all the keys responding using 360Controller.
Everybody seems to have minimal issues connecting controllers to their Fire TV. Any ideas?
(Sorry, I don't have enough posts to post links.)
Click to expand...
Click to collapse
I'm sorry, but it'd be tough to replicate the issue without a device to test with. That receiver looks identical to the one I purchased, but I don't know if it is actually the same on the inside.
I don't know about on OSX, but I found that I could pair the xbox controller with the receiver on my windows PC (using the generic driver). Once I had paired on Windows, I could plug the adapter into anything running android and it would work just fine.
That's the first place I would start- try pairing a controller and making it work on a machine running Windows or OSX or whatever is 'supposed' to work. That way, you can at least tell if the hardware is bad. If you are able to pair and use it on one of those machines, plug it into your Fire TV and use the same controller and see if it recognizes it.
If it works on OSX or Windows but not on the Fire TV, I don't know what to tell you. Maybe pick up a USB OTG adapter and see if you can get it running on another android system. I haven't found a phone / tablet yet that hasn't been plug and play with the adapter.
Lastly, and this is unlikely, it could be that you are running a USB hub that isn't able to provide sufficient power. If that is the case, unplug all other USB devices and test it in the port. If it works there, the hub / draw of other devices is your problem. I'd recommend getting a powered USB hub in that case.
hotterpop said:
I'm sorry, but it'd be tough to replicate the issue without a device to test with. That receiver looks identical to the one I purchased, but I don't know if it is actually the same on the inside.
I don't know about on OSX, but I found that I could pair the xbox controller with the receiver on my windows PC (using the generic driver). Once I had paired on Windows, I could plug the adapter into anything running android and it would work just fine.
That's the first place I would start- try pairing a controller and making it work on a machine running Windows or OSX or whatever is 'supposed' to work. That way, you can at least tell if the hardware is bad. If you are able to pair and use it on one of those machines, plug it into your Fire TV and use the same controller and see if it recognizes it.
If it works on OSX or Windows but not on the Fire TV, I don't know what to tell you. Maybe pick up a USB OTG adapter and see if you can get it running on another android system. I haven't found a phone / tablet yet that hasn't been plug and play with the adapter.
Lastly, and this is unlikely, it could be that you are running a USB hub that isn't able to provide sufficient power. If that is the case, unplug all other USB devices and test it in the port. If it works there, the hub / draw of other devices is your problem. I'd recommend getting a powered USB hub in that case.
Click to expand...
Click to collapse
Thanks for the suggestions but I don't think the adapter will work with the Fire TV. I'm not using a hub anywhere in the setup.
I can pair the controller to a Windows machine using the adapter and the generic driver. I'm able to see the computer register all the inputs using the joy.cpl (app?) in Windows. When I plug the adapter into the Fire TV afterwards, I still can't control anything with the controller. Does the ADB debugging switch make a difference? I have the adb over usb set to OFF.
What's an USB OTG and where can I get one? What adapter did you pick up that worked? It might be better if I just picked up the same one instead of troubleshooting this one. Open to any other ideas though.
ilovexd said:
Thanks for the suggestions but I don't think the adapter will work with the Fire TV. I'm not using a hub anywhere in the setup.
I can pair the controller to a Windows machine using the adapter and the generic driver. I'm able to see the computer register all the inputs using the joy.cpl (app?) in Windows. When I plug the adapter into the Fire TV afterwards, I still can't control anything with the controller. Does the ADB debugging switch make a difference? I have the adb over usb set to OFF.
What's an USB OTG and where can I get one? What adapter did you pick up that worked? It might be better if I just picked up the same one instead of troubleshooting this one. Open to any other ideas though.
Click to expand...
Click to collapse
I'm still not convinced the device is not malfunctioning. Did you actually connect and use a controller to control the PC? It could be that the device is connecting and sending some information, but the part that actually connects to the controller is broken. On Windows, you can just download the driver and install it as per these instructions: https://krisrowland.wordpress.com/2...eless-controller-adapter-in-windows-7-64-bit/
I'm pretty sure this is the controller I bought. Like I said, it looks the same as yours. I'm confident you just got a bad unit.
I had one question:
-Does the rumble function work? (The vibration)
Greetings by Idijt
I_did_it_just_tmrrow said:
I had one question:
-Does the rumble function work? (The vibration)
Greetings by Idijt
Click to expand...
Click to collapse
It's been a while since I've actually used it, but if I remember right it does work if you map it properly in the emulator you are using. For example, Mupen 64 has support for rumble packs, and I'm about 80% certain it works.
hi mate did you ever get this working, i have the same issue, bought a cheap receiver from ebay. hooked it up to laptop, installed driver, worked fine. connect to fire tv, nothing!
ARGH!!!!
The cheap china clones just making problems with Android aka FireTV. That's what I heard.
But the original adapter makes me sometimes Problems too. Sometimes the Box Start in security Mode (grey written in the left corner of the screen) or had to replug them After Start to let the Box recognice the adapter again.
I bought two very great Bluetooth Controller from "mi". Really nice. Like Xbox 360 Controller. You can buy it cheap @ allbuy.com.
Greetings by Idijt
manikm303 said:
hi mate did you ever get this working, i have the same issue, bought a cheap receiver from ebay. hooked it up to laptop, installed driver, worked fine. connect to fire tv, nothing!
ARGH!!!!
Click to expand...
Click to collapse
I got it working!!!! Make sure all developer options are turned off in settings.
Hi there, I'm having the same issue here.
HARDWARE: - FireTV 2.0
- xbox 360 wireless chinadapter
- xbox 360 wireless controller
I've turned off the dev settings on my firetv, connected the 360 controller via my chinadapter to my pc to verify that it's paired and working. Plugged my adapter into my firetv. Restarted firetv. Pressed the silver X button, the blue x button, the ))) connect button... Still nothing. I've gone into the "Add a new controller" area (where it tries to establish connectivity) and tried everything I can think of. I was really excited about this and am kinda bummed. Not wanting to buy extra controllers really.
- something noone else has mentioned running into - the firetv seems to crash or reset itself when I push the ))) connect button on the chinadapter receiver. . . weird. . .
---------- Post added at 06:02 PM ---------- Previous post was at 05:18 PM ----------
UPDATE:
I got it to interact randomly. Unfortunately it was unacceptably buggy. Crashing games, not recognizing inputs and, well, everything that might be awful about a controller. So I guess I'm looking into cheap bluetooth controllers. def not spending $50 on Amazons controller to play freaking android games lol let alone games in the amazon app store. Thanks for the thread and any advice on getting it to work properly you may have discovered.
I am having the issue of not being able to connect my 360 controller via the Chinese adapter to the fire tv....I have got it working in windows but it wont connect on the fire tv. I have disabled developer options restarted the fire tv and hit the x button to try to connect but I get nothing.

Fire TV with Bluetooth keyboard + mouse/trackpad

I apologize up front because I can see that this has been discussed but I can't find a definitive answer after reading through all the different threads.
Is there a way to pair a bluetooth keyboard + mouse/trackpad to the Fire TV with a device that can't be rooted?
I ask because like a lot of others, I just pre-ordered the Fire TV Stick. Now I know it's not out so we don't know what it can/can't do but assuming the code is the same, I'm trying to do some homework before it arrives. And since the Stick doesn't have the USB inputs, I have to rely on Bluetooth or maybe an app for a virtual keyboard/mouse if anyone knows of one.
Thanks in advanced!
I didn't even think of that. I ordered two. I use my K400 occassionally for different apps. I was using the limitless remote app too. The new Fire Tv Remote app might work but I will miss the K400.
stanggman75 said:
I didn't even think of that. I ordered two. I use my K400 occasionally for different apps. I was using the limitless remote app too. The new Fire Tv Remote app might work but I will miss the K400.
Click to expand...
Click to collapse
Yeah. I'm looking for it to use with HBOgo mostly. I'm guessing that the mouse is the important input to get that working.
It will be great if I can pair my Bluetooth mouse with Fire TV Stick.
This works well with the FireTV: http://eud.dx.com/product/ipazzport...google-tv-player-black-844230388#.VHTNJTSsVx0
podge3 said:
This works well with the FireTV
Click to expand...
Click to collapse
Is that a bluetooth device? Or does it have a USB dongle? The Fire Stick doesn't have a free USB port.
jeck11 said:
Is that a bluetooth device? Or does it have a USB dongle? The Fire Stick doesn't have a free USB port.
Click to expand...
Click to collapse
USB dongle. I don't use the port for anything else so its fine for me.
Has anyone tried a USB hub on the Fire?
jeck11 said:
Is that a bluetooth device? Or does it have a USB dongle? The Fire Stick doesn't have a free USB port.
Click to expand...
Click to collapse
This is exactly what I am trying to figure out also, a Bluetooth keyboard/trackpad that will work with sideloaded apps like HBO GO or NFL Game Pass that are not compatible with the remote.
usb dongles work on firetv, not on firetv stick.... for now.
Would also like to know, sideloaded Settings.apk on mine to get to the stock android settings. Can detect Microsoft bluetooth mouse, Monoprice bluetooth headset and sound brick but none of them pair right. The two audio devices make a pairing sound. But don't play audio.
I sideloaded the settings.apk, and using it I'm able to successfully pair Apple Wireless Keyboard and Apple Magic Mouse. Both keyboard and mouse functionalities work just as if it was USB keyboard/mouse.
Aerb ibk-02
kanedo said:
I sideloaded the settings.apk, and using it I'm able to successfully pair Apple Wireless Keyboard and Apple Magic Mouse. Both keyboard and mouse functionalities work just as if it was USB keyboard/mouse.
Click to expand...
Click to collapse
Yes, keyboard pairing works with both Fire TV and Fire TV Stick. I've sideloaded the settings apk and have successfully paired the AERB IBK-02 keyboard with trackpad/mouse to both devices. This keyboard has a trackpad, but it has limited functionality. Although scrolling is possible with two finger touch, you cannot click and drag. For this you'll need to pair up a Bluetooth mouse.
vg-kbd2000
I picked this up for my Samsung TV ( doesn't work with mine - no Bluetooth )
But, it works with my Sony GoogleTv and my FTV stick with settings apk side-loaded
the nice thing with this keyboard is that you can pair it with 3 different devices.
It has a selector button on the top to choose which one.
I haven't played with it very long and am trying to figure out what works and what doesn't
To use the touch-pad a switch on the bottom needs to be slid to "mouse mode"
I can't use the TV specific buttons on the right side of the keyboard. Wish i knew how to get them to work with the GoogleTv - it has an Ir blaster built in and will control volume,channel,etc
It will power my TV on and off - it has an Ir transmitter. But, that is all that does - strange
They are marked down to $39 at Best Buy and there are usually many open boxed ones to be had for less. Original price was about $100
But, they are mostly useless for the Samsung Tvs that they do work on - Most of apps do not support the keyboard or so I have read.
Wish the was some sort of unifying remote that I could connect to it and then plug into my TV though.
If you get one, the touchpad goes into a sleep mode after 30 seconds or so. I've read that hitting any button will wake it up. I didn't know that at first and was pairing it , unpairing it and powering it off.
If anyone else picks one of these up, Please post your findings
kanedo said:
I sideloaded the settings.apk, and using it I'm able to successfully pair Apple Wireless Keyboard and Apple Magic Mouse. Both keyboard and mouse functionalities work just as if it was USB keyboard/mouse.
Click to expand...
Click to collapse
Hello
i tried to connect an Apple Magic Trackpad - i can find it and i can write the pin then im am stuck - it wont connect - how did you do it ?

Phone as a mouse, FireTV Stick?

Is it possible to run a program like droidmote without root, to control the sideloaded apps with touch features?
Also trying to get a bluetooth Microsoft Wireless Notebook Presenter Mouse 8000 to connect. Installed Settings.apk. Can detect it, but can't pair it.
Not without root.
I bought one of those Nyko tablet game pads for mine, the Stick natively supports the Nyko game pad, and it has a mouse mode.
http://www.gamestop.com/android/accessories/nyko-play-pad-pro-tablet-controller/104098
Picked two is them up in store for 12.97 each. They don't have them up front, they keep them in the back so you have to ask for them.
yes
BigB42078 said:
Is it possible to run a program like droidmote without root, to control the sideloaded apps with touch features?
Also trying to get a bluetooth Microsoft Wireless Notebook Presenter Mouse 8000 to connect. Installed Settings.apk. Can detect it, but can't pair it.
Click to expand...
Click to collapse
I use Yatse to control XBMC with no issues on my s3 Samsung, Remote IME seems to work for everything else.
I am unsure of the mouse, I can use my Logitech keyboard for full control and browser work though. hope this helps
Elysian893 said:
Not without root.
I bought one of those Nyko tablet game pads for mine, the Stick natively supports the Nyko game pad, and it has a mouse mode.
http://www.gamestop.com/android/accessories/nyko-play-pad-pro-tablet-controller/104098
Picked two is them up in store for 12.97 each. They don't have them up front, they keep them in the back so you have to ask for them.
Click to expand...
Click to collapse
Not true anymore. Try this app:
https://play.google.com/store/apps/details?id=com.wukongtv.wkremote.client.en
Has some translation issues (seems to be a Chinese app). Install on your phone and when you open it and connect it will automatically install the client on your ftv (or at least it did on my rooted box with play store access). Seems to have both navigation controls and mouse mode. Worked well for me in my ftv (have not tried on ftv sticks yet, mine won't be here until Tuesday).
Sent from my SCH-I545 using Tapatalk
I'm pretty weary of Chinese apps.
How are you using remote ime? This is only thing i could find in under that name. http://www.mygica.ca/forum/viewtopic.php?t=9&p=9
Tried scanning and manually entering ip and nothing.
Don't know about the Chinese app, doesn't look like it has a touchpad feature for using it as a pointer for touch controls that fire stick remote can't do. Joystick an option even though the stick isn't a game machine. Wantd to use something i already have if possible.
I haven't had any luck connecting anything Bluetooth. Monoprice Bluetooth headphones and sound brick show as detected but never play audio. Mouse detects but doesn't pair.
That Nyko gamepad works perfectly (as a gamepad and as a mouse), and if you go to the game controllers part of Settings you'll see Amazon mentions Nyko specifically, that controller is fully supported from the factory on the Fire Stick.
BigB42078 said:
How are you using remote ime? This is only thing i could find in under that name. http://www.mygica.ca/forum/viewtopic.php?t=9&p=9
Tried scanning and manually entering ip and nothing.
Don't know about the Chinese app, doesn't look like it has a touchpad feature for using it as a pointer for touch controls that fire stick remote can't do. Joystick an option even though the stick isn't a game machine. Wantd to use something i already have if possible.
I haven't had any luck connecting anything Bluetooth. Monoprice Bluetooth headphones and sound brick show as detected but never play audio. Mouse detects but doesn't pair.
Click to expand...
Click to collapse
The Chinese app definitely can function as a mouse. Press the square in the upper right corner and select mouse module.
Sent from my SCH-I545 using Tapatalk
Keep in mind I'm talking about the stick, there is no root for it yet. At least not a software root. If I had root, could install droidmote.
BigB42078 said:
Keep in mind I'm talking about the stick, there is no root for it yet. At least not a software root. If I had root, could install droidmote.
Click to expand...
Click to collapse
he does have that in mind if you read all of his posts.. i use the app he recommended as well and it works fine as a mouse.
collindv said:
The Chinese app definitely can function as a mouse. Press the square in the upper right corner and select mouse module.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I can't seem to get the chinese app to connect to my fire stick.
xQuestx said:
I can't seem to get the chinese app to connect to my fire stick.
Click to expand...
Click to collapse
I get my fire TV sticks tonight so I will be testing it out. On my fire TV I didn't have to do anything but open the app on my phone and it displayed the ip of my ftv. When I selected it it installed the server automatically on the ftv.
Sent from my SCH-I545 using Tapatalk
Has anyone been able to get mouse clicks to work with WKremote, the chinese app, on the Fire TV Stick? I have no problem getting a mouse pointer and I'm able to move it around, but not able to click on anything. I've tried placing the pointer on the object i want to click on, then switching to gesture mode but that doesn't seem to work either.
I'm trying to use it on the Time Warner app and I need to be able to click different options. I also tried to click on something in XBMC with no luck.
Any suggestions?
SB1417 said:
Has anyone been able to get mouse clicks to work with WKremote, the chinese app, on the Fire TV Stick? I have no problem getting a mouse pointer and I'm able to move it around, but not able to click on anything. I've tried placing the pointer on the object i want to click on, then switching to gesture mode but that doesn't seem to work either.
I'm trying to use it on the Time Warner app and I need to be able to click different options. I also tried to click on something in XBMC with no luck.
Any suggestions?
Click to expand...
Click to collapse
Works fine for me with the Nyko controller.
Elysian893 said:
Works fine for me with the Nyko controller.
Click to expand...
Click to collapse
same
SB1417 said:
Has anyone been able to get mouse clicks to work with WKremote, the chinese app, on the Fire TV Stick? I have no problem getting a mouse pointer and I'm able to move it around, but not able to click on anything. I've tried placing the pointer on the object i want to click on, then switching to gesture mode but that doesn't seem to work either.
I'm trying to use it on the Time Warner app and I need to be able to click different options. I also tried to click on something in XBMC with no luck.
Any suggestions?
Click to expand...
Click to collapse
Works fine for me. Just tap the screen while in mouse mode. I think the fire can be somewhat finicky on what you can click on when in the amazon interface
Sent from my SCH-I545 using Tapatalk
collindv said:
Works fine for me. Just tap the screen while in mouse mode. I think the fire can be somewhat finicky on what you can click on when in the amazon interface
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Thanks. I figured thats how it should be working, but it wasn't for me. I'll try reinstalling it again to see if that does anything.
Is there an app for iOS folks. Dont see Wukong ?
Issues connecting to FireTV Stick
Anyone else having problems connecting to the FireTV Stick. When I open up the app it will search and see the FireTV and shows the correct IP, when I click it to connect it shows fail to initialize and brings me to some help section ( that clearly I do not understand)
Any info would be nice, perhaps there is an issue with the router I am using, uPnP is disabled or something? I just received my new router recently belkin ac1200 and I am not sure if that is the cause.
The Wukon app works for me on the FireTV Stick, but it's super slow. Mouse is jumpy, and inputs are sometimes delayed by 2-3 seconds.
I didn't install anything on the stick to support it, it just worked.
I am interested in how it works more if anyone has any English resources. Pretty cool how it puts up a notification on the FireTV Stick.

[Q] Paired bluetooth mouse suddenly won't connect anymore

Hey guys, new to the forum.... sideloaded the Settings.apk last night and was able to pair a motorolla BT mouse no problem. Used it all last night.
Came home today and the Fire TV was frozen, so I reset it, now the mouse isn't connecting.
When I go into the Settings app, it still shows it in the list but it doesn't say 'Connected' under the name like it does for the Fire remote.
Clicking on it in the list does nothing. I wish there was some way to tell it to forget that device but I'm not seeing any way.
I've tried uninstalling the Settings.apk but when I reinstall, the mouse is still listed as a device that has already been recognized.
I've checked the mouse batteries, and even took it upstairs and paired it with my computer to make sure it still worked.
Any ideas on how I can get it back?
***
PS Mods - Sorry for posting this in two forums, I think the first post was not placed in the right area to get help.
The only thing that helped me (for the stick though) was doing a factory reset. After that I could add it back and connect.
phillip.r said:
Hey guys, new to the forum.... sideloaded the Settings.apk last night and was able to pair a motorolla BT mouse no problem. Used it all last night.
Came home today and the Fire TV was frozen, so I reset it, now the mouse isn't connecting.
When I go into the Settings app, it still shows it in the list but it doesn't say 'Connected' under the name like it does for the Fire remote.
Clicking on it in the list does nothing. I wish there was some way to tell it to forget that device but I'm not seeing any way.
I've tried uninstalling the Settings.apk but when I reinstall, the mouse is still listed as a device that has already been recognized.
I've checked the mouse batteries, and even took it upstairs and paired it with my computer to make sure it still worked.
Any ideas on how I can get it back?
***
PS Mods - Sorry for posting this in two forums, I think the first post was placed in the area to get help.
Click to expand...
Click to collapse
You must press on the bluetooth icon on the right side next to the name of your mouse, then you will have the option to unpair your mouse, and then you can pair it again.
To do so, you must install an app on your android phone which is called Wukong Remote, and use the touchpad mode, which will act like your mouse and then you can do the steps and unpair your mouse.
I had kinda the same problem, but it was with a USB mouse. I used the mouse for about a week, then the Fire TV froze, and the mouse never connected again. Not only did it not connect, it would not connect to any other device I have either. When I put the dongle in my PC it shows there is a dongle, but the firmware for the dongle was somehow erased. It has never happened to any other donlges I have, but I still worry that it could.
dbdoshi said:
The only thing that helped me (for the stick though) was doing a factory reset. After that I could add it back and connect.
Click to expand...
Click to collapse
Yeah i'm afraid that's what's going to have to happen
smaghraby said:
You must press on the bluetooth icon on the right side next to the name of your mouse, then you will have the option to unpair your mouse, and then you can pair it again.
To do so, you must install an app on your android phone which is called Wukong Remote, and use the touchpad mode, which will act like your mouse and then you can do the steps and unpair your mouse.
Click to expand...
Click to collapse
I would def. try this if I had an android phone, but I have an iPhone. Been looking for a mouse app for it but haven't had much luck.
Yes, doing factory reset was painful. But I learned my lesson, I don't unpair my BT keyboard/mouse from the stick or try to use it with any other device.
Also, not really answering your Q, but you can install the Amazon FTV app on your iPhone ( https://itunes.apple.com/us/app/amazon-fire-tv-remote/id947984433 ) and use that to toggle your BT settings (I tried that and it didn't help me). Its an option if you don't want to use a third party app (you can also send commands for control selection in your FTV for movements through adb, AFTVNews.com has a guide)
phillip.r said:
Hey guys, new to the forum.... sideloaded the Settings.apk last night and was able to pair a motorolla BT mouse no problem. Used it all last night.
Came home today and the Fire TV was frozen, so I reset it, now the mouse isn't connecting.
When I go into the Settings app, it still shows it in the list but it doesn't say 'Connected' under the name like it does for the Fire remote.
Clicking on it in the list does nothing. I wish there was some way to tell it to forget that device but I'm not seeing any way.
I've tried uninstalling the Settings.apk but when I reinstall, the mouse is still listed as a device that has already been recognized.
I've checked the mouse batteries, and even took it upstairs and paired it with my computer to make sure it still worked.
Any ideas on how I can get it back?
***
PS Mods - Sorry for posting this in two forums, I think the first post was not placed in the right area to get help.
Click to expand...
Click to collapse
I bought a BT mouse but it was very slow and not accurate on my fire tv stick. It worked well on my phone and pc.
Does your mouse work good on the fire tv?

Dualshock 3/Sixaxis on rooted Sloane?

I am on the latest version of FIre OS (5.2.7.2_r1) and am using a first party PS3 controller, the version with Dualshock and Sixaxis combined
I know this question has been asked and ansered before, but the methods I have tried to use have not worked for me, sadly.
I have tried Using Sixaxis Controller from DancingPixelStudios. I enable and set the IME from a terminal (cannot get a Settings.apk to install) I have set the Bluetooth Master Address both from the USB pairing method built into the app, and with Sixpair on a linux machine (a raspberry pi running the latest version of Raspbian) Stort the server and try to connect, nothing.
I tried the app Sixaxis Enable, which is supposed to connect the DS3 via USB, and I get a message saying that it's not supported.
I found an app called USB/BT Joystick Center. After setting the IME for it and connect my controller via USB, and when I click Search in the app, it finds the Unifying receiver, the powered USB hub I am using (I think) and the PS3 controller. It says that I click on it and it says that it loads a built in keymap or something along those lines, but the controller doesn't work...Maybe I just don't really know how to use the app properly, but so far the help option hasn't actually been much help. It says that if I want to use my PS3 controller over bluetooth, that I will need to connect an external USB Bluetooth Dongle with a CSR chipset (which I don't have)
Something interesting I have noticed, is that I have been getting a pop up request to enter the pin for my controller. I have tried 0000 and 1234, to no avail., Using an app called Bluetooth Settings, I currently have my device set to be fully discoverable and pairable.. What I can take away from this is that my box IS seeing the PS3 controller over bluetooth.
It kinda seems to me like all the methods available to do connect a PS3 controller to the FIre TV are all dead, or I'm doing something wrong, which is more than possible.
So I guess my question is, is there a way nowadays to use my official PS3 controller on my FIre TV? I have no real preferece if it is over USB or Bluetooth. (Unless I have company over Iam usually no further than 5 feet away from the box when I use it) and how do I acheive it if it can still be done?
THank you for the patience!
LazorBlind said:
I am on the latest version of FIre OS (5.2.7.2_r1) and am using a first party PS3 controller, the version with Dualshock and Sixaxis combined
I know this question has been asked and ansered before, but the methods I have tried to use have not worked for me, sadly.
Click to expand...
Click to collapse
I feel your pain...
I also had this issue literally tried everything... I moved on and accepted it wasn't going to work, so purchased Bluetooth controllers.. Which would also not pair.. Til I ran a simple command...
https://forum.xda-developers.com/fire-tv/help/guide-pair-undetected-bluetooth-devices-t4023677
CFKod said:
I feel your pain...
I also had this issue literally tried everything... I moved on and accepted it wasn't going to work, so purchased Bluetooth controllers.. Which would also not pair.. Til I ran a simple command...
https://forum.xda-developers.com/fire-tv/help/guide-pair-undetected-bluetooth-devices-t4023677
Click to expand...
Click to collapse
Funny enough, I actually just recently found your reddit posts about this while looking for something else. Sadly it did not work for me that I know of.
After running your command via adb, my terminal gave me:
"Result: parcell(00000000 00000001 '........')"
Then I went to the Bluetooth menu, pressed the PS button on my PS3 controller, and tried to discover it as both a game controller, and under Other Bluetooth Devices.
Maybe im not doing something right, or maybe because I have the bluetooth master address in the controller set to the Fire's bluetooth MAC address, the fire thinks it is paired when it is not.
Further help would be appreciated if you know what im doing wrong with that method.
The good news though is that I HAVE discovered (or at least there are no nentions about it that I have seen) a method to use an official ps3 controller over USB, and will post a tutorial sometime in the next 24 hours.
Do you have busybox installed? Try it via the terminal emulator app on the device itself.
Also it sounds like you need to pair it again... In the settings forget the device. Then
CFKod said:
Do you have busybox installed? Try it via the terminal emulator app on the device itself.
Also it sounds like you need to pair it again... In the settings forget the device. Then
Click to expand...
Click to collapse
Busybox is installed to /system/xbin
After trying to run the command in the terminal emulator included in Apps2SD Pro, I got the same response from the terminal and I still couldn't detect the controller over bluetooth.

Categories

Resources