Help needed - trying to load OTA Manually - HTC 10 Questions & Answers

following on from my earlier post (in the wrong section!) http://forum.xda-developers.com/htc-10/how-to/help-changing-fw-t3446464
I have finally got the Voda AU FW working - I missed where I had to flash the firmware.zip from an OTA twice for it to work.
Now my phone boots into 1.21 - but the OS version listed in Download mode is 1.53? (i used the firmware from the 1.21 to 1.53 OTA).
How do I now apply the right OTAs to get me back to 1.80? I've loaded the stock recovery..... but when trying to flash the 1.21 to 1.53 update, it fails.....?

First of all firmware packages may not be full packages so flashing a firmware taken from an ota isn't recommended unless your on the firmware before the ota. Of course you can try. So your firmware is 1.53? Flash the stock system.img and boot for 1.53.710 then flash stock recovery. Once you boot to system you should be able to take the ota.

yldlj said:
First of all firmware packages may not be full packages so flashing a firmware taken from an ota isn't recommended unless your on the firmware before the ota. Of course you can try. So your firmware is 1.53? Flash the stock system.img and boot for 1.53.710 then flash stock recovery. Once you boot to system you should be able to take the ota.
Click to expand...
Click to collapse
Hey, thanks for the reply.
So, if I boot up, in settings, it says 1.21, but in download mode, it says OS is 1.53.710.6
somehow what I did got it mismatched. i cant use OTA - says corrupt.
Your instructions still apply?

Also, then I would need 1.53.710 nandroid....anyone got a link to one?

sephstyler said:
Also, then I would need 1.53.710 nandroid....anyone got a link to one?
Click to expand...
Click to collapse
Download mode is firmware. In the settings is software. I am pretty sure if you search the stock guides thread you will find the system.img and boot for 1.53. I think there is even one for 1.80.710. I would use that and also i would find the ota for 1.80 and flash the firmware from it. But like i said in first post firmwares from ota are not complete so you may have incomplete firmware.

yldlj said:
Download mode is firmware. In the settings is software. I am pretty sure if you search the stock guides thread you will find the system.img and boot for 1.53. I think there is even one for 1.80.710. I would use that and also i would find the ota for 1.80 and flash the firmware from it. But like i said in first post firmwares from ota are not complete so you may have incomplete firmware.
Click to expand...
Click to collapse
Thanks.
I've taken a look at this thread: http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
seems like the nandroids for this CID (HTC__039) is just 1.21.710.10......
There are OTAs, but I dont think I can find a System.img and boot for 1.53 for this CID....do you know anywhere else I can look?

sephstyler said:
Thanks.
I've taken a look at this thread: http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
seems like the nandroids for this CID (HTC__039) is just 1.21.710.10......
There are OTAs, but I dont think I can find a System.img and boot for 1.53 for this CID....do you know anywhere else I can look?
Click to expand...
Click to collapse
I would ask someone to post a system.img and boot for the 1.80.710 hopefully someone will have it. If someone does post it then all you need to do is extract the 1.80 firmware from the ota and flash it.

yldlj said:
I would ask someone to post a system.img and boot for the 1.80.710 hopefully someone will have it. If someone does post it then all you need to do is extract the 1.80 firmware from the ota and flash it.
Click to expand...
Click to collapse
Thanks, heres to hoping.

sephstyler said:
Thanks.
I've taken a look at this thread: http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
seems like the nandroids for this CID (HTC__039) is just 1.21.710.10......
There are OTAs, but I dont think I can find a System.img and boot for 1.53 for this CID....do you know anywhere else I can look?
Click to expand...
Click to collapse
Download the 1.21 SystemImage backup from @TRLOS at that thread.
Follow my guide here to restore it and I'll make a 710 zip file for stage 2 for you.
http://forum.xda-developers.com/htc-10/how-to/guide-how-to-ota-receive-corrupt-message-t3378187
EDIT: Give me about 15 minutes to make the zip
EDIT2: The fix zip is now in the OP of the guide thread.
So, to recap...download the SystemImage backup from @TRLOS
Download the fix zip I posted in my thread
Follow the steps in my thread to restore your ability to take the 1.53 OTA.

jollywhitefoot said:
Download the 1.21 SystemImage backup from @TRLOS at that thread.
Follow my guide here to restore it and I'll make a 710 zip file for stage 2 for you.
http://forum.xda-developers.com/htc-10/how-to/guide-how-to-ota-receive-corrupt-message-t3378187
EDIT: Give me about 15 minutes to make the zip
EDIT2: The fix zip is now in the OP of the guide thread.
So, to recap...download the SystemImage backup from @TRLOS
Download the fix zip I posted in my thread
Follow the steps in my thread to restore your ability to take the 1.53 OTA.
Click to expand...
Click to collapse
Thanks! I'm trying it now.

sephstyler said:
Thanks! I'm trying it now.
Click to expand...
Click to collapse
It is now downloading 1.53 update.
Thank you!!!

sephstyler said:
It is now downloading 1.53 update.
Thank you!!!
Click to expand...
Click to collapse
No problem. Anytime

Related

[Q] Update boot.img

Has anyone got, or able to flash for me, the boot.img from stock N2506EX_23_150108?
Many gratitude points if you could upload for me ?
Thanks.
2nd
babelmonk said:
Has anyone got, or able to flash for me, the boot.img from stock N2506EX_23_150108?
Many gratitude points if you could upload for me
Thanks.
Click to expand...
Click to collapse
Hey I am also looking for this....on a side note are you looking for this because of wifi issues? has anyone found a fix?...pretty bummed wifi is not working on this thing
Could you install the dumps in http://forum.xda-developers.com/oppo-n3/help/looking-dump-boot-img-t2998030 Post #5, then unroot and run the OTAs to get you back up to current?
...
Lum_UK said:
Could you install the dumps in http://forum.xda-developers.com/oppo-n3/help/looking-dump-boot-img-t2998030 Post #5, then unroot and run the OTAs to get you back up to current?
Click to expand...
Click to collapse
I doubt that any stock rom will flash with twrp recovery....in the past with oppo phones (n1, 7a) its always needed stock recovery to flash stock roms...I guess we just play the waiting game until someone can upload the boot image from the updated rom. I'm pretty sure flashing that alone will get wifi back up and running. 07 Or if someone has the stock recovery they could upload....I am unsure if you can just rip it directly out of the rom and flash it....Also on oppo forums they have posted the rom for 5207 I am also unsure if you can flash that to the 5206.
The zip in that thread is images to flash in fastboot?
...
I would think you would have to flash each image individually.... system, boot, recovery ....unless if we start by flashing only the unmodified boot.img to see if it will fix wifi....but i doubt it because i suspect the wrong boot image is what screwed up wifi in the first place...someone please correct me if im wrong
c0dysm1th said:
I would think you would have to flash each image individually.... system, boot, recovery ....unless if we start by flashing only the unmodified boot.img to see if it will fix wifi....but i doubt it because i suspect the wrong boot image is what screwed up wifi in the first place...someone please correct me if im wrong
Click to expand...
Click to collapse
Yes, you're right; the boot image is not compatible with the upgrade; so downgrade to get root. I'm working on trying to upgrade again with the OTA upgrade and then getting the new boot.img and rooting that. More soon I hope!
FYI I tried your images, Lum_UK and found that I couldn't flash boot.img with fastboot, BUT I could dd them from within recovery, so I got myself up and running again.
Yes you'd have to flash all the images by hand one after the other.
edit: Replied before seeing babelmonk's response, please ignore this post.
steps?
babelmonk said:
Yes, you're right; the boot image is not compatible with the upgrade; so downgrade to get root. I'm working on trying to upgrade again with the OTA upgrade and then getting the new boot.img and rooting that. More soon I hope!
FYI I tried your images, Lum_UK and found that I couldn't flash boot.img with fastboot, BUT I could dd them from within recovery, so I got myself up and running again.
Click to expand...
Click to collapse
Can u please list the steps u took I'd like to get back up and running but don't want to screw this phone up any more ....(dd from recovery ) I'm not familiar with this if it is a command
babelmonk said:
Yes, you're right; the boot image is not compatible with the upgrade; so downgrade to get root. I'm working on trying to upgrade again with the OTA upgrade and then getting the new boot.img and rooting that. More soon I hope!
FYI I tried your images, Lum_UK and found that I couldn't flash boot.img with fastboot, BUT I could dd them from within recovery, so I got myself up and running again.
Click to expand...
Click to collapse
I can't get the OTA to work even after downgrading, but I do have a working system running 141228 with that hacked kernel, root and non-broken wireless.
Anyone want a nandroid of it? It's a slight upgrade at least
please
Lum_UK said:
I can't get the OTA to work even after downgrading, but I do have a working system running 141228 with that hacked kernel, root and non-broken wireless.
Anyone want a nandroid of it? It's a slight upgrade at least
Click to expand...
Click to collapse
please hook it up with that nandroid that i can flash in twrp
c0dysm1th said:
please hook it up with that nandroid that i can flash in twrp
Click to expand...
Click to collapse
Here you go, sorry it's taken so long
http://lum.uk/n3/files/N5206EX_23_141228_root_nocd.7z
Extract it into the TWRP backups folder and then restore like any other nandroid.
THANK YOU
Lum_UK said:
Here you go, sorry it's taken so long
http://lum.uk/n3/files/N5206EX_23_141228_root_nocd.7z
Extract it into the TWRP backups folder and then restore like any other nandroid.
Click to expand...
Click to collapse
Thank you how can i buy you a beer paypal?
c0dysm1th said:
Thank you how can i buy you a beer paypal?
Click to expand...
Click to collapse
Don't worry about it
Seems there's only about 4 or 5 people actively working on this phone here, so I'm sure we'll all end up helping each other at some point.
Lum_UK said:
Here you go, sorry it's taken so long
http://lum.uk/n3/files/N5206EX_23_141228_root_nocd.7z
Extract it into the TWRP backups folder and then restore like any other nandroid.
Click to expand...
Click to collapse
Thanks for that, though I haven't tried it yet. Can I ask what it changes? Is it worth the upgrade? My original firmware +root seems to work pretty well already so I may well leave it alone until L or CM comes out.
babelmonk said:
Thanks for that, though I haven't tried it yet. Can I ask what it changes? Is it worth the upgrade? My original firmware +root seems to work pretty well already so I may well leave it alone until L or CM comes out.
Click to expand...
Click to collapse
I have no idea what it changes as it's the firmware my International N5706 was shipped with when it was released last week. It may be different to the US model (though I believe the only difference between the two is the baseband) and is definitely different to the N5707 for Chinese users.
Dude, thanks!!! You saved my life!
I got wifi back AND root!
sivxo said:
I got wifi back AND root!
Click to expand...
Click to collapse
Hi ! when the zip file is downloaded, what is steps to install it please ?
thanks
marakud said:
Hi ! when the zip file is downloaded, what is steps to install it please ?
thanks
Click to expand...
Click to collapse
Sorry. Missed this. Did you manage?
Oppo neo 7 a33f custom recovery plzzz send me

One m8 t mobile lollipop ota captured

Got the update at 2am, posting it so maybe custom roms can get WiFi calling, feel free to mirror just asking you keep them in the thread.
https://docs.google.com/file/d/0B7lAMKoPVdWKU1VfSnRNZS10Zjg/edit?usp=docslist_api
would i be able to just flash this if i wanted to with twrp. just curious.
Android6190 said:
would i be able to just flash this if i wanted to with twrp. just curious.
Click to expand...
Click to collapse
Twrp won't have the decryption keys or some of the HTC specific functions required to apply the OTA. You'll need a stock /system and a stock recovery.
dang. okay
T-Mobile US 4.20.531.4 firmware
Here is the new T-Mobile US firmware from today with the recovery and boot.img removed, just need someone to do their magic and remove red text.
https://dl.dropboxusercontent.com/u/...4/firmware.zip
do we just flash in twrp? Thank you by the way
No it's a stock ota you have to use HTC recovery.
rubyman94 said:
do we just flash in twrp? Thank you by the way
Click to expand...
Click to collapse
Check out my TWRP of a stock no-root ROM (lollipop): https://mega.nz/#F!qsNkyITK!yGJVGKuWOZ_vyndIF8-Z0Q
There are also other files there as well, but remember that if you don't update your firmware you may have issues.
-brad
bradley_e_smith said:
Check out my TWRP of a stock no-root ROM (lollipop): https://mega.nz/#F!qsNkyITK!yGJVGKuWOZ_vyndIF8-Z0Q
There are also other files there as well, but remember that if you don't update your firmware you may have issues.
-brad
Click to expand...
Click to collapse
Umm... your Firmware file is corrupted
Azuske said:
Umm... your Firmware file is corrupted
Click to expand...
Click to collapse
really? it came directly from the OTA.zip file and I was able to extract recovery.img from it.
bradley_e_smith said:
really? it came directly from the OTA.zip file and I was able to extract recovery.img from it.
Click to expand...
Click to collapse
I mean it could be my computer but it keeps saying its corrupted when I download it.
Azuske said:
Umm... your Firmware file is corrupted
Click to expand...
Click to collapse
It's not, it's encrypted.
bradley_e_smith said:
really? it came directly from the OTA.zip file and I was able to extract recovery.img from it.
Click to expand...
Click to collapse
gamer765 said:
It's not, it's encrypted.
Click to expand...
Click to collapse
Oh, well it won't let me put it on my device because the computer thinks it's corrupted
Fenny said:
Twrp won't have the decryption keys or some of the HTC specific functions required to apply the OTA. You'll need a stock /system and a stock recovery.
Click to expand...
Click to collapse
Would this explain the error that I'm getting?
Package expects build fingerprint of htc/tmous/htc_m8:4.4.4/KTU84P/396641.2:user/release-keys or htc/tmous/htc_m8:5.0.1/htc_m8: 5.0.1/LRX22C/464190.4:user/release-keys.; this device has htc/tmous/htc_m8:4.4.3/KTU84L/365360.5/user/release-keys.
I flashed stock recovery, but my phone is still root. Did a full wipe/restore, still getting same thing. The error looks like it's not happy about a missing update perhaps, if I'm reading that correctly. Best I know, I have the latest kitkat version. But, I've had twrp for awhile so maybe I missed an OTA update along the way.
cyclonesworld said:
Would this explain the error that I'm getting?
Package expects build fingerprint of htc/tmous/htc_m8:4.4.4/KTU84P/396641.2:user/release-keys or htc/tmous/htc_m8:5.0.1/htc_m8: 5.0.1/LRX22C/464190.4:user/release-keys.; this device has htc/tmous/htc_m8:4.4.3/KTU84L/365360.5/user/release-keys.
I flashed stock recovery, but my phone is still root. Did a full wipe/restore, still getting same thing. The error looks like it's not happy about a missing update perhaps, if I'm reading that correctly. Best I know, I have the latest kitkat version. But, I've had twrp for awhile so maybe I missed an OTA update along the way.
Click to expand...
Click to collapse
If you're SOFF and supercid just flash the lollipop ruu T-Mobile just release. It doesn't matter what previous rom you're on. Then reflash custom recovery and rooted. I've done this alot of time already.
bradley_e_smith said:
Check out my TWRP of a stock no-root ROM (lollipop): https://mega.nz/#F!qsNkyITK!yGJVGKuWOZ_vyndIF8-Z0Q
There are also other files there as well, but remember that if you don't update your firmware you may have issues.
-brad
Click to expand...
Click to collapse
So the steps would be:
- Flash stock recovery via fastboot
- Flash firmware via fastboot
- Flash twrp via fastboot
- Flash Lollipop via twpr
Is this correct?
rickpref said:
So the steps would be:
- Flash stock recovery via fastboot
- Flash firmware via fastboot
- Flash twrp via fastboot
- Flash Lollipop via twpr
Is this correct?
Click to expand...
Click to collapse
For me (I am s-on) I did it in this order:
- flashed twrp stock rom
- rebooted and made sure the rom worked
- flashed stock recovery via fastboot
- rebooted and downloaded and installed OTA.
If you are s-off I believe (someone correct me if I am wrong) you can use the RUU instead.
I did have a wifi issue which was solved by a factory wipe ( yes I had to re-install and setup the phone again).
-brad
bradley_e_smith said:
For me (I am s-on) I did it in this order:
- flashed twrp stock rom
- rebooted and made sure the rom worked
- flashed stock recovery via fastboot
- rebooted and downloaded and installed OTA.
If you are s-off I believe (someone correct me if I am wrong) you can use the RUU instead.
I did have a wifi issue which was solved by a factory wipe ( yes I had to re-install and setup the phone again).
-brad
Click to expand...
Click to collapse
Wow, that sounds much simpler, thanks...gonna try that now.
Radio
Any chance someone can please post a flashable zip with the new t-mo radio?
Where would I get the stock recovery for this fw and update. I want to root but keep my ota

Firmware Update M8 Rogers

Hi, I've talked of this before. The firmware update, I tried returning to stock then attempting to update the firmware through updating the software OTA but that failed no matter what I did. I returned to stock, flashed the stock recovery, and even locked the bootloader. And finally I attempted an RUU but the RUU failed. So now I lost all my data in vain. I rooted the phone again and reflashed it to Insert coin android 4.4.4, ect.. And I currently am really tired of this. Isn't there any way to get through this? I want the new Insert Coin Lollipop but I have S-ON and cant update the firmware. Can someone please help me? It would be really appreciated. Thanks for reading this lousy comment.
Ali7000 said:
Hi, I've talked of this before. The firmware update, I tried returning to stock then attempting to update the firmware through updating the software OTA but that failed no matter what I did. I returned to stock, flashed the stock recovery, and even locked the bootloader. And finally I attempted an RUU but the RUU failed. So now I lost all my data in vain. I rooted the phone again and reflashed it to Insert coin android 4.4.4, ect.. And I currently am really tired of this. Isn't there any way to get through this? I want the new Insert Coin Lollipop but I have S-ON and cant update the firmware. Can someone please help me? It would be really appreciated. Thanks for reading this lousy comment.
Click to expand...
Click to collapse
I don't know anything about Insert Coin. But if you want stock lollipop from Rogers, you could restore a Nandroid backup via TWRP.
For a start, post your fastboot getvar all (without serial no. and imei no.)
Then most probably the nandroid that ikeny mentioned is the right backup.
I'd be more worried about the RUU failing - I wonder what the error code was?
If OP's M8 was Rogers branded, CID ROGER_001, then RUU from Rogers never existed in the first place. Perhaps this explains the error.
ikeny said:
If OP's M8 was Rogers branded, CID ROGER_001, then RUU from Rogers never existed in the first place. Perhaps this explains the error.
Click to expand...
Click to collapse
Yes, that would be correct. That's my first assumption. Although do you have any methods to update my firmware to the latest android 5.1 lolipop?
Ali7000 said:
Yes, that would be correct. That's my first assumption. Although do you have any methods to update my firmware to the latest android 5.1 lolipop?
Click to expand...
Click to collapse
Use the TWRP nandroid backup image at the bottom of the first post -
http://forum.xda-developers.com/htc-one-m8/help/rogers-m8-lollipop-update-error-t3020675
ikeny said:
I don't know anything about Insert Coin. But if you want stock lollipop from Rogers, you could restore a Nandroid backup via TWRP.
Click to expand...
Click to collapse
I'm actually kinda wondering, is there a method to update to lollipop without returning to stock? I don't have S-OFF so I cant update the firmware alone. All I want is to update the firmware somehow and then I'd be able to use the latest Insert Coin Lollipop Rom. Although thanks a ton for that link, I'll use it as my last resort.
ikeny said:
Use the TWRP nandroid backup image at the bottom of the first post -
http://forum.xda-developers.com/htc-one-m8/help/rogers-m8-lollipop-update-error-t3020675
Click to expand...
Click to collapse
So just a confirmation before I get started, I can just restore this backup despite being in a custom rom at the moment? And will this erase all my data on the phone such as media, ext...? Thanks man, appreciate it a lot.
Ali7000 said:
So just a confirmation before I get started, I can just restore this backup despite being in a custom rom at the moment? And will this erase all my data on the phone such as media, ext...? Thanks man, appreciate it a lot.
Click to expand...
Click to collapse
Yes, and yes.
If you want future OTA, replace TWRP with the attached stock recovery as the final step.
ikeny said:
Yes, and yes.
If you want future OTA, replace TWRP with the attached stock recovery as the final step.
Click to expand...
Click to collapse
Hmnn...Thank you very much. I appreciate it a lot. So now that I have downloaded the last link to the first post which named "Rogers_5_0_1.zip" I just have to backup all my media, apps, ect...Then I can restore the lollipop backup, root the phone, then install Insert Coin 5.1. And I'm also assuming the data being wiped is absolutely unavoidable.
Ali7000 said:
Hmnn...Thank you very much. I appreciate it a lot. So now that I have downloaded the last link to the first post which named "Rogers_5_0_1.zip" I just have to backup all my media, apps, ect...Then I can restore the lollipop backup, root the phone, then install Insert Coin 5.1. And I'm also assuming the data being wiped is absolutely unavoidable.
Click to expand...
Click to collapse
After you unzip the file, you will get the TWRP nandroid image. This image is a 100% stock, and all your files and apps will be wiped. Unavoidable. You could follow the second post in the previous link for rooting. Beyond that, you are on your own.
ikeny said:
After you unzip the file, you will get the TWRP nandroid image. This image is a 100% stock, and all your files and apps will be wiped. Unavoidable. You could follow the second post in the previous link for rooting. Beyond that, you are on your own.
Click to expand...
Click to collapse
Thanks man, I appreciate all your support. I also notice that you were the one who posted nandroid. Many thanks for everything pal.
ikeny said:
After you unzip the file, you will get the TWRP nandroid image. This image is a 100% stock, and all your files and apps will be wiped. Unavoidable. You could follow the second post in the previous link for rooting. Beyond that, you are on your own.
Click to expand...
Click to collapse
Hi, I unzipped the Rogers_5_0_1.zip file and it came out a folder named "2015-02-05--12-39-33 LRX22C release-keys" and an img file named "recovery.img." Do I just copy the folder to my backup TWRP folder then ignore the img file? Sorry for being really annoying and asking a lot of question, I just wanna make sure I'm doing it right.
Ali7000 said:
Hi, I unzipped the Rogers_5_0_1.zip file and it came out a folder named "2015-02-05--12-39-33 LRX22C release-keys" and an img file named "recovery.img." Do I just copy the folder to my backup TWRP folder then ignore the img file? Sorry for being really annoying and asking a lot of question, I just wanna make sure I'm doing it right.
Click to expand...
Click to collapse
You don't need the img file now. That was the stock recovery, for later, if you want to replace the TWPR recovery.
ikeny said:
You don't need the img file now. That was the stock recovery, for later, if you want to replace the TWPR recovery.
Click to expand...
Click to collapse
Thanks a ton man, you honestly don't know how thankful I am now. I'm copying the folder right now and I'm gonna restore it.

Looking for stock recovery for H3G UK 1.40.771.1 - This seems rarer than unicorn poop

Are there are members that have the UK M9 on H3G running 1.40.771.1?
I can't find a version of the stock recovery anywhere for it.
I'm rooted, s-on, TWRP Foolishly forgot to take a backup before installing TWRP.
Many thanks.
TeamDraven said:
Are there are members that have the UK M9 on H3G running 1.40.771.1?
I can't find a version of the stock recovery anywhere for it.
I'm rooted, s-on, TWRP Foolishly forgot to take a backup before installing TWRP.
Many thanks.
Click to expand...
Click to collapse
http://androidruu.com/?developer=M9
Three ruu's zips here should be able to pull stock recovery from it and yes you're lucky m7 didn't have anything for three
liam_davenport said:
http://androidruu.com/?developer=M9
Three ruu's zips here should be able to pull stock recovery from it and yes you're lucky m7 didn't have anything for three
Click to expand...
Click to collapse
Hey there Liam.
Thanks for the reply.
I've been to that site often, but they don't have the ruu for 1.40.771.1, only 1.32.771.6 and 1.32.771.15; and from what I understand I cant flash a recovery that doesn't match my current SW number.
I'd also be interested to learn how to extract the recovery from an RUU. I tried searching last for instructions, but to no avail.
Cheers.
TeamDraven said:
Hey there Liam.
Thanks for the reply.
I've been to that site often, but they don't have the ruu for 1.40.771.1, only 1.32.771.6 and 1.32.771.15; and from what I understand I cant flash a recovery that doesn't match my current SW number.
I'd also be interested to learn how to extract the recovery from an RUU. I tried searching last for instructions, but to no avail.
Cheers.
Click to expand...
Click to collapse
If you can't find the stock recovery you want, (and you want it so that you can flash an OTA update), you can always extract it from the OTA update zip once the update downloads to your device.
The OTA update will flash with the recovery that comes with the update. For example, say you are on 1.32.771.6 (random number) and you receive an OTA update for upgrading to 1.40.771.1 -- the OTA update will be able to install itself with a 1.32.771.6 stock recovery or with a 1.40.771.1 stock recovery, and the update comes with the 1.40.771.1 recovery.
To extract if from the OTA update zip, all you have to do is open the zip up with the latest version of 7zip, and pull out the recovery.img file.
efrant said:
If you can't find the stock recovery you want, (and you want it so that you can flash an OTA update), you can always extract it from the OTA update zip once the update downloads to your device.
The OTA update will flash with the recovery that comes with the update. For example, say you are on 1.32.771.6 (random number) and you receive an OTA update for upgrading to 1.40.771.1 -- the OTA update will be able to install itself with a 1.32.771.6 stock recovery or with a 1.40.771.1 stock recovery, and the update comes with the 1.40.771.1 recovery.
To extract if from the OTA update zip, all you have to do is open the zip up with the latest version of 7zip, and pull out the recovery.img file.
Click to expand...
Click to collapse
Dude.
Thank you so much. I'll try that now.
Is the OTA update easy to find on my device once downloaded?
Cheers.
Greg.
TeamDraven said:
Dude.
Thank you so much. I'll try that now.
Is the OTA update easy to find on my device once downloaded?
Cheers.
Greg.
Click to expand...
Click to collapse
It should be in /data/data/com.htc.updater/files/
efrant said:
It should be in /data/data/com.htc.updater/files/
Click to expand...
Click to collapse
Intriguing, I don't have a /data/data/com.htc.updater/files/ folder!
efrant said:
It should be in /data/data/com.htc.updater/files/
Click to expand...
Click to collapse
Nope, Ignore me. I hadn't selected root explorer and to view hidden files. DOH!
efrant said:
If you can't find the stock recovery you want, (and you want it so that you can flash an OTA update), you can always extract it from the OTA update zip once the update downloads to your device.
The OTA update will flash with the recovery that comes with the update. For example, say you are on 1.32.771.6 (random number) and you receive an OTA update for upgrading to 1.40.771.1 -- the OTA update will be able to install itself with a 1.32.771.6 stock recovery or with a 1.40.771.1 stock recovery, and the update comes with the 1.40.771.1 recovery.
To extract if from the OTA update zip, all you have to do is open the zip up with the latest version of 7zip, and pull out the recovery.img file.
Click to expand...
Click to collapse
Dude, you are awesome.
I now have the recovery.img pulled from the OTA update.
Do I need to relock the bootloader or anything, or am I able to just flash this using adb fastboot flash?
thank you so much.
TeamDraven said:
Dude, you are awesome.
I now have the recovery.img pulled from the OTA update.
Do I need to relock the bootloader or anything, or am I able to just flash this using adb fastboot flash?
thank you so much.
Click to expand...
Click to collapse
You should be able to flash the recovery using fastboot. And I don't think you need to lock the bootloader to accept the update. (You need to make sure that you have a stock system partition though...)
efrant said:
You should be able to flash the recovery using fastboot. And I don't think you need to lock the bootloader to accept the update. (You need to make sure that you have a stock system partition though...)
Click to expand...
Click to collapse
Yup, all is stock other than TWRP
efrant said:
You should be able to flash the recovery using fastboot. And I don't think you need to lock the bootloader to accept the update. (You need to make sure that you have a stock system partition though...)
Click to expand...
Click to collapse
Cool cool.
I think I have flashed back to stock recovery.
When I rebooted into recovery after flashing I had a black screen with a red exclamation triangle on it.
Is that correct?
Cheers.
Hmmmmm, OK, I decided to see if the OTA update would take, so began the process.
The phone booted into recovery, the update started, then about 10% into the update the phone went to the red exclamation triangle screen.
The phone eventually rebooted itself and the update hasn't taken, (I'm still on 5.0.2).
BUT I have a working phone, so there's that!
Any thoughts on what may have happened?
Cheers.
TeamDraven said:
Cool cool.
I think I have flashed back to stock recovery.
When I rebooted into recovery after flashing I had a black screen with a red exclamation triangle on it.
Is that correct?
Cheers.
Click to expand...
Click to collapse
Yup, that's the stock recovery.
TeamDraven said:
Hmmmmm, OK, I decided to see if the OTA update would take, so began the process.
The phone booted into recovery, the update started, then about 10% into the update the phone went to the red exclamation triangle screen.
The phone eventually rebooted itself and the update hasn't taken, (I'm still on 5.0.2).
BUT I have a working phone, so there's that!
Any thoughts on what may have happened?
Cheers.
Click to expand...
Click to collapse
The first part of the update is just a bunch of checks to ensure that you are fully stock. Are you sure you are fully stock? Did you have root at any point? Did you mount /system as read/write at any point?
Sent from my HTC One M9 using Tapatalk
efrant said:
Yup, that's the stock recovery.
The first part of the update is just a bunch of checks to ensure that you are fully stock. Are you sure you are fully stock? Did you have root at any point? Did you mount /system as read/write at any point?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Yep, I'm sure I'm fully stock.
All I did was unlock bootloader, root and install TWRP.
No rom flashing or anything like that.
Sent from my HTC One M9 using Tapatalk
TeamDraven said:
Yep, I'm sure I'm fully stock.
All I did was unlock bootloader, root and install TWRP.
No rom flashing or anything like that.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
You need to restore a backup of /system from BEFORE you had root. When you got root, you wrote to the system partition, which means it's no longer stock.
Sent from my HTC One M9 using Tapatalk
Well, bugger.
I believe the only way to go back to full stock would be to run an ruu then, is that correct?
Sent from my HTC One M9 using Tapatalk
TeamDraven said:
Well, bugger.
I believe the only way to go back to full stock would be to run an ruu then, is that correct?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Yes, either that, or find an untouched TWRP backup for your CID and restore it.
I uploaded a 1.40.771.1 backup during last night and added it to my google sheet. The rest of the 771 files will be uploaded somewhere in the near future.
I can't believe I missed this post.
OMGs that's awesome. Thank you SO much.
Flippy498 said:
I uploaded a 1.40.771.1 backup during last night and added it to my google sheet. The rest of the 771 files will be uploaded somewhere in the near future.
Click to expand...
Click to collapse

HK HTC10 Returning to stock rom

Hi there, I'm using Hong Kong version of htc10, i tried to root it but when i flashed supersu and xposed arm64 sdk23, it comes to stuck in the system ui interface showing that: 'System UI has stopped unexpectedly....etc.' Looping in that point. So i tried wipe all data in twrp mode and reboot again, still the same situation. Then I download a TW version of stock IMG which is 1.30.708.1(Original was 1.53.708.4) and flashed it in download mode, after that i rebooted it, everything is normal again. Fresh new welcome screen.
But there are some features that i can't use such as can't receive 4G+ signal, can't receive VoLTE, even could't use battery saving mode ....etc.
So I just want to know where can I find the STOCK IMG for my HK version CID HTC__622, which is 1.53.708.4 or so called RUU for it? Thanks.:crying::crying:
axx134679 said:
Hi there, I'm using Hong Kong version of htc10, i tried to root it but when i flashed supersu and xposed arm64 sdk23, it comes to stuck in the system ui interface showing that: 'System UI has stopped unexpectedly....etc.' Looping in that point. So i tried wipe all data in twrp mode and reboot again, still the same situation. Then I download a TW version of stock IMG which is 1.30.708.1(Original was 1.53.708.4) and flashed it in download mode, after that i rebooted it, everything is normal again. Fresh new welcome screen.
But there are some features that i can't use such as can't receive 4G+ signal, can't receive VoLTE, even could't use battery saving mode ....etc.
So I just want to know where can I find the STOCK IMG for my HK version CID HTC__622, which is 1.53.708.4 or so called RUU for it? Thanks.:crying::crying:
Click to expand...
Click to collapse
I'm looking for the HK stock img as well, I've only found one which seems to have been modified so OTA no longer work. Did you have any luck?
electric0ant said:
I'm looking for the HK stock img as well, I've only found one which seems to have been modified so OTA no longer work. Did you have any luck?
Click to expand...
Click to collapse
No luck??
axx134679 said:
No luck??
Click to expand...
Click to collapse
Should be in here. www.androidfilehost.com/?w=files&flid=74636
axx134679 said:
No luck����
Click to expand...
Click to collapse
I've found a twrp backup posted from someone else:
http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297/post67760253#post67760253
the working link for the download is on the next page.
this is definitely the HK rom as after a wipe the default language is HK Chinese.
only problem is OTA does not work and when trying to manually flash the OTA manually (using TWRP and stock recovery) the check on the OTA zip passes but the system check fails so it looks like system has been modified.
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
purple patch said:
Should be in here. www.androidfilehost.com/?w=files&flid=74636
Click to expand...
Click to collapse
OMG there is a HK 1.21.708.4 ROM! if its stock then should be abel to update all the way to 1.80.708.6!
downloading now! if this works I am going to be over the moon!
just one question, what do I use to restore the zip? flash with twrp?
electric0ant said:
I've found a twrp backup posted from someone else:
http://forum.xda-developers.com/htc...ry-ruu-ota-t3359297/post67760253#post67760253
the working link for the download is on the next page.
this is definitely the HK rom as after a wipe the default language is HK Chinese.
only problem is OTA does not work and when trying to manually flash the OTA manually (using TWRP and stock recovery) the check on the OTA zip passes but the system check fails so it looks like system has been modified.
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
OMG there is a HK 1.21.708.4 ROM! if its stock then should be abel to update all the way to 1.80.708.6!
downloading now! if this works I am going to be over the moon!
just one question, what do I use to restore the zip? flash with twrp?
Click to expand...
Click to collapse
Rename zip file to 2PS6IMG.zip. Place on sdcard. Reboot to download mode and follow instructions. Do full backup before (SD and internal).
purple patch said:
Rename zip file to 2PS6IMG.zip. Place on sdcard. Reboot to download mode and follow instructions. Do full backup before (SD and internal).
Click to expand...
Click to collapse
if i boot to download mode isn't just the page with some options and also the mode to run fastboot commands to?
electric0ant said:
if i boot to download mode isn't just the page with some options and also the mode to run fastboot commands to?
Click to expand...
Click to collapse
Once that file is in correct spot, you will see option to flash it (VOLUp to flash). Been a while since I flashed stock img. Check guide section if you want to confirm.
purple patch said:
Once that file is in correct spot, you will see option to flash it (VOLUp to flash). Been a while since I flashed stock img. Check guide section if you want to confirm.
Click to expand...
Click to collapse
thanks for your help!
purple patch said:
Once that file is in correct spot, you will see option to flash it (VOLUp to flash). Been a while since I flashed stock img. Check guide section if you want to confirm.
Click to expand...
Click to collapse
just wanted to thank you again,
I'm totally stock now with working OTAs!!
electric0ant said:
just wanted to thank you again,
I'm totally stock now with working OTAs!!
Click to expand...
Click to collapse
Awesome, no problem, happy to point you in the right direction.
electric0ant said:
just wanted to thank you again,
I'm totally stock now with working OTAs!!
Click to expand...
Click to collapse
Please help the Hong kong community by backing up the system image and boot for 1.80.708.6 . I already provided the stock recovery file. It shouldn't take too long.
pro nexus said:
Please help the Hong kong community by backing up the system image and boot for 1.80.708.6 . I already provided the stock recovery file. It shouldn't take too long.
Click to expand...
Click to collapse
I would love to help but I've already sold the HTC 10 on already.
But with the RUU linked by purple patch you can get to stock completely. And it's so easy!
electric0ant said:
just wanted to thank you again,
I'm totally stock now with working OTAs!!
Click to expand...
Click to collapse
OMG, how the hell did i miss such important thing!!! I will try it right away! Thank you!!VERY MUCH!!!!
Sorry to bother you again, I put the 2PS6IMG in the external card, but it show an error message:" FAIL19 RU_MAIN_VER_FAIL os-version in android-info missing."
Maybe the IMG version that i downloaded us higher than my phone currently running? I'm running 1.53.XXX now.
Well, nevermind, I S-OFFed my htc10 and flashed the zip, now I'm using stock firmware and able to receive OTA, Thanks a lot man! You are my HERO!!
I encounter the same situation and like to return to Stock ROM, but my firmware version is 1.92.708.3. Searched over Internet and can't find the corresponded RUU. Anyone have it and can share to me?
antonyyip said:
I encounter the same situation and like to return to Stock ROM, but my firmware version is 1.92.708.3. Searched over Internet and can't find the corresponded RUU. Anyone have it and can share to me?
Click to expand...
Click to collapse
you don't need the same version of RUU, just flash the old version. I always flash the 1.53 RUU
DummyPLUG said:
you don't need the same version of RUU, just flash the old version. I always flash the 1.53 RUU
Click to expand...
Click to collapse
but I'm still S-ON, not yet purchased Sunshine:crying:
antonyyip said:
but I'm still S-ON, not yet purchased Sunshine:crying:
Click to expand...
Click to collapse
I assume you had unlock it, then it may already lost the warrant(not sure for this in HK), so why not s-off it via htc?

Categories

Resources