Open SERVICEMOD on kk Stock - Galaxy S3 Neo General

Hi for all this is my first thread
I am not responsible for any errors that may get in your phone
I was test it in my phone gt-i9301i
1-Open the dialer (dial pad)
2-Insert *#0011# (you needn't to tap call button)
3-Press the menu button and select back(don't not press back button)
4-Press the menu button again and select 'key input' menu item
5-Enter "Q0000" then tap ok
Wait for about 10 seconds.and you will see servicemod menu
NOTE: Make a Backup for (efs) by use recoveryORtwrp(recommended)
Sorry for my English C u

Wrong!
Push menu, tap back then push menu again tap key input & write Q0000 (Q 4 zeros) wait & there you go.

Zola III said:
Wrong!
Push menu, tap back then push menu again tap key input & write Q0000 (Q 4 zeros) wait & there you go.
Click to expand...
Click to collapse
OK thank (Zola III) but You can see the third step?

Related

WIN2k5-Hard Reset

Ineed assistance.
After loading 2005 and play with it for a while, The phone stopped working. I can't change the volume etc. etc. Trying to lad some Lang. updates resulted in a very strange look behaviour.
Tried Hard rest by pressing tradionaly the ON/OF together with the soft reset nobe but nothing happend, themachine never falls to the inital setup and always excited with all the programs loaded. The green LED flashes like every thing back to Norma HOWEVER
It is completely out of it's normal operation.
How can I "hard reset it?????
Dubi said:
How can I "hard reset it?????
Click to expand...
Click to collapse
--------taken from another post (I'm too lazy to type)---------
you have to make sure to follow the sequence correctly and keep all of them pressed fo 5-10 secs
> Press power putton
> Then press Record Button
> Then Press Camera Button
> Then with Stylus press Reset Button
After this you will see 3 options.
1 Kit = YES ------------------ change this to NO
2 Register Hive= No --------------- should remain NO
3 Storage = No --------------------- change this to YES
*Use the Recorder Button to Scroll.
Use the Camera Button to change values.
*To Save changes press the Navigational Button.
> Press power putton
> Then press Record Button
> Then Press Camera Button
> Then with Stylus press Reset Button
oR
> Press power putton
+ press Record Button
+ Press Camera Button
+ with Stylus press Reset Button
which one ?
This one:
> Press power putton (don't let go)
+ press Record Button (don't let go)
+ Press Camera Button (don't let go)
+ with Stylus, press Reset Button (you may want to hold it a bit until you see the menu I'm referring to on my post above)

How to SIM unlock Samsung Galaxy S4 SGH-M919 (tested - works) - Updated: 7/2/13

Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
FAQ:
Is this for real? Does it really unlock?
YES! Many people have tried it, and most people have successes.
If you are having problems with the unlock process, please read the rest of the FAQ.
Will this SIM unlock work on my model of Galaxy S4 that is not T-Mobile (SGH-M919)?
This unlock has been tried on the T-Mobile (USA) version of the phone, if you're coming from any other model, YMMV, it might or might not work.
That being said, many others have tried it on the AT&T model, and on the international I9505 with success.
Do I need to be on stock rom?
Yes, you need to be on stock rom for this to work.
One of the main causes of failure to unlock is people not flashing back to stock rom first. The reason is the special dial codes only work on stock roms.
Is the unlock permanent? Do the unlock last through reboot/reflash/etc.?
Yes, the unlock is permanent.
You can reflash a custom rom, or do anything you want to the phone, and the unlock will stay.
In step 7, my phone is already "SHA256_ENABLED_FLAG[0]", what should I do?
Great, this is the setting you want.
It means your phone already allows you to make some settings changes, it DOES NOT mean your phone is already unlocked.
You should continue with the rest of the process until the last step.
In step 14, backup missing.
If the golden backup doesn't exist, try the work around found by GrndSers-Rcng:
http://forum.xda-developers.com/showpost.php?p=43172004&postcount=292
How do I know the unlock is successful?
If your phone is not unlocked, when you put in an unauthorized SIM card, a dialog pops up on your phone asking you to enter the unlock code.
If you're successful with this procedure, there would be no popup dialog asking for the unlock code when you put in any SIM card.
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
no way; is this for real ?
im already unlocked, can someone confirm this ?
rock on dude.
the last step, does it somehow reset your phone back to stock?
it tells me Back-up not exist cause I pressed erase back up by accident
I've gotta find someone with a SIM from another carrier first...
Will check back with update.
i just did this, it rebooted. I need to find a ATT sim ASAP
i have tried on my t-mobile galalxy s4,it works..thx for your help!!!
update, it did not work
---------- Post added at 11:25 AM ---------- Previous post was at 11:21 AM ----------
nismo35 said:
update, it did not work
Click to expand...
Click to collapse
are u guys running the new baseband?
wavrunrx said:
no way; is this for real ?
im already unlocked, can someone confirm this ?
rock on dude.
Click to expand...
Click to collapse
yes it works dude wow
---------- Post added at 07:27 PM ---------- Previous post was at 07:26 PM ----------
kaleido said:
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
Click to expand...
Click to collapse
thank you dude i was so close to buy the unlock code thanks again u rock
connection problem or invalid mmi code
thats the message i get when i dial the number in the first step
should i be on complete stock?
im running wicked version 2 right now
TheAtheistOtaku said:
connection problem or invalid mmi code
thats the message i get when i dial the number in the first step
Click to expand...
Click to collapse
Another way to get in to the service menu is *#0011#
See this tread: http://forum.xda-developers.com/showthread.php?t=2282683
kaleido said:
Another way to get in to the service menu is *#0011#
See this tread: http://forum.xda-developers.com/showthread.php?t=2282683
Click to expand...
Click to collapse
also tried this code. still getting same message
Works
Thanks man it works
kaleido said:
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
Click to expand...
Click to collapse
TheAtheistOtaku said:
also tried this code. still getting same message
Click to expand...
Click to collapse
What can I say?
If you can't even get into the *#0011# menu, it's definitely something wrong with your rom.
Try flash back to stock, and repeat the unlock.
kaleido said:
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
Click to expand...
Click to collapse
When i started the process mine said this at the beginning:
SHA256_ENABLED_FLAG[0]
I believe that was the desired result, but i didn't have to do anything, mine is already set there (step 6) ....I don't have an Att Sim to try, but when my buddy gets home i am going to see if mine came factory unlocked....
spaided said:
When i started the process mine said this at the beginning:
SHA256_ENABLED_FLAG[0]
I believe that was the desired result, but i didn't have to do anything, mine is already set there (step 6) ....I don't have an Att Sim to try, but when my buddy gets home i am going to see if mine came factory unlocked....
Click to expand...
Click to collapse
Same here, Got to this part of the process and I'm already at SHA256_ENABLED_FLAG[0].
spaided said:
When i started the process mine said this at the beginning:
SHA256_ENABLED_FLAG[0]
I believe that was the desired result, but i didn't have to do anything, mine is already set there (step 6) ....I don't have an Att Sim to try, but when my buddy gets home i am going to see if mine came factory unlocked....
Click to expand...
Click to collapse
Mine is same as yours & I won't be able to test mine out until the wkend when I see my GF since she's on AT&T. Do let use know your results when you are able to.
awesome.... next stop... AOSP direct from Google. in June, I believe? haha :good:
RMXO said:
Mine is same as yours & I won't be able to test mine out until the wkend when I see my GF since she's on AT&T. Do let use know your results when you are able to.
Click to expand...
Click to collapse
I should be able to try it in about 2 hours or so when i get home with the gf's att phone.
It works, confirmed. Placed an ATT sim in my t-mobile and made a call.. Awesome!

[Q] Will this work to unlock ATT Note 2

I have a new ATT Samsung Note 2 with 4.3. With this I don't have the menu "NW Lock NV Data INITIALLIZ." So I need to find a different method to unlock. I found these instructions on the S4 forum for unlocking a Samsung Galaxy S4. I'm wary of trying it before getting opinions on whether or not it will work first. Has anyone tried these and been successful on a Note 2 or on other Samsungs than the S4? Also, if I follow this will the Golden Backup disappear and if so can I regenerate it?
Here are the steps:
1. Goto phone dailer, and enter *#27663368378# for the debug service menu.
2. In "ServiceMode", select [1] UMTS
3. In "UMTS MAIN MENU", select [1] DEBUG SCREEN
4. In "DEBUG SCREEN", select [6] PHONE CONTROL
5. In "PHONE CONTROL", select [6] NETWORK LOCK
6. In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
7. Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
8. Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
9. Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
10. Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
11. Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
12. Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
13. Select [6] COMMON
14. In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
15. Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
So can it be done or not?
Caryllb said:
I have a new ATT Samsung Note 2 with 4.3. With this I don't have the menu "NW Lock NV Data INITIALLIZ." So I need to find a different method to unlock. I found these instructions on the S4 forum for unlocking a Samsung Galaxy S4. I'm wary of trying it before getting opinions on whether or not it will work first. Has anyone tried these and been successful on a Note 2 or on other Samsungs than the S4? Also, if I follow this will the Golden Backup disappear and if so can I regenerate it?
Here are the steps:
1. Goto phone dailer, and enter *#27663368378# for the debug service menu.
2. In "ServiceMode", select [1] UMTS
3. In "UMTS MAIN MENU", select [1] DEBUG SCREEN
4. In "DEBUG SCREEN", select [6] PHONE CONTROL
5. In "PHONE CONTROL", select [6] NETWORK LOCK
6. In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
7. Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
8. Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
9. Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
10. Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
11. Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
12. Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
13. Select [6] COMMON
14. In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
15. Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Click to expand...
Click to collapse
Why doesn't anyone search? Look for a thread called free unlock. You're welcome.
Toshik1, I tried these steps for the S4 on my Note 2 and they did not work. I had all the right menu selections and it seemed to step through them as instructed. But it just didn't unlock. That may be specific to an ATT Note 2. Perhaps they would work for a Tmobile or some other carrier.
emeianoite, I did search for several days. The only free unlock steps I found specific for the Note 2 were for Android 4.1.1. Version 4.3 was missing a vital menu item. Folks said you could unlock if you downgrade to 4.1.1 first. Didn't want to do that. So I searched for unlocking a note 2 with version 4.3 and found these steps for the S4. Unfortunately as I said above, that didn't work either. Wound up paying for the unlock code.
Thanks! Sim unlock code was obtained from ATT, so it's only a question of properly rooting the phone with official 4.3 already in it.

GPS Fix - Service Mode Method N900T

Anyone thats tried any s5 ports, note 4, etc.. My Gps didnt lock. doing some research on the N9005 forums and others I figured out how to get the gps to lock. Now i tried this for a s5 port, so let me know if it works for others.
Sources:
http://forum.xda-developers.com/showthread.php?t=2754957
http://forum.xda-developers.com/galaxy-note-3/help/n9005-gps-fix-flashing-stock-s5-port-rom-t2827427
Combined:
On you dialer type in this USSD *#0011# (The stock samsung dialer... third party might show "Connection problem or invalid MMI Code")
Press top right 3 dot menu key > press back
Press top right 3 dot menu key press key input > Q
Press top right 3 dot menu key > press key input > 0000
Wait for a few seconds and the screen options will change
~~~~~~~~
Select option 2 "UE SETTINGS & INFO"
Select option 1 "SETTING"
Select option 2 "SYSTEM"
Select option 3 "NV REBUILD"
Press on System, Protocol, GPS, IMS
Wait for 30 seconds and then shutdown your phone
Power On phone
GPS should work fine now
~~~~~~~~~
Recommend to use GPS STATUS & Tool Box App to do a gps cache reset and download AGPS Data
Use this app. I get gps lock within seconds
https://play.google.com/store/apps/details?id=by.zatta.agps
All you need to do is change the carrier to tmob and leave everything else default

[IF YOU DON'T LIKE HARDWARE KEY ACTIONS] Set menu as menu / home longpress as recents

How to set menu key for menu!
(and not for recents)
Long press home for recents!
(and not for google): How to do???
It's really simple:
N.B. you can do this only with xposed additions, follow the 2' step
A.S. Change options as you want for other key actions!
A.S.2 ROOT REQUIRED
1-Install Xposed-Installer and The module "GravityBox [KK]"
2-activate The module and reboot.
3-Open GravityBox and there is some problem
(Percent of Battery and volume panel)
4- go to "Statusbar tweaks" - "Battery settings" and "Battery Percent text" and set as you want THEN
5-go to Media tweaks and click on "Expandable volume panel" and deselect " link ringtone & notifications"
End of bug.
6-Now go to "Navigation Key" actions and set:
《Menu Key as menu - Recent Key as Menu》
Home Long Press:
Ok now home button long press:
1-Download Xposed module "Xposed Additions"
(if not present download from play store)
2-and active module & reboot.
3-Now open The app and go to "Buttons" then click "Add New Key" and press home
(real home button "The button that you use for go to the launcher")
4-Now click "Ok" -
5-Now click on "Home"
6-and on "Add New condition"
7-and on "Screen On"
8-Now tick (At right) "Long press"
9-And now on "Long Press"
10-And below click on "Recent Appliations"
Now simple reboot and your phone is Ready!
If I helped please leave a thank

Categories

Resources