I have a galaxy note 2 block in orange romania,how can i unlock it?
I tried to unlock with (Just dial the following keys *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone... enjoy!!! There is no confirmation on the phone that the unlock was successfull.... just reboot your phone....)
But i don't have the option UMTS,can i unlock it with something else?
i have same problem... if you find how to do it please, put also here... thx....
tzighi said:
I have a galaxy note 2 block in orange romania,how can i unlock it?
I tried to unlock with (Just dial the following keys *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone... enjoy!!! There is no confirmation on the phone that the unlock was successfull.... just reboot your phone....)
But i don't have the option UMTS,can i unlock it with something else?
Click to expand...
Click to collapse
I just tried, and I also don't have UMTS.
But I have "Debug Screen" in the main menu and all other menus below.
Did you try with a 4.1.1 stock firmware?
tzighi said:
I have a galaxy note 2 block in orange romania,how can i unlock it?
I tried to unlock with (Just dial the following keys *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone... enjoy!!! There is no confirmation on the phone that the unlock was successfull.... just reboot your phone....)
But i don't have the option UMTS,can i unlock it with something else?
Click to expand...
Click to collapse
I'm new to this forum too, and here:
http://forum.xda-developers.com/showthread.php?t=1896696
I found a lot of informations that could also help you. You have to root your phone and flash a stock firmware without lock as Memphis_ suggest, these guides lead you to unlock your phone (and more...).
rodem77 said:
I'm new to this forum too, and here:
http://forum.xda-developers.com/showthread.php?t=1896696
I found a lot of informations that could also help you. You have to root your phone and flash a stock firmware without lock as Memphis_ suggest, these guides lead you to unlock your phone (and more...).
Click to expand...
Click to collapse
Yeah you can easily unlock with GalaxSim Unlock app but you have to pay.
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
FAQ:
Is this for real? Does it really unlock?
YES! Many people have tried it, and most people have successes.
If you are having problems with the unlock process, please read the rest of the FAQ.
Will this SIM unlock work on my model of Galaxy S4 that is not T-Mobile (SGH-M919)?
This unlock has been tried on the T-Mobile (USA) version of the phone, if you're coming from any other model, YMMV, it might or might not work.
That being said, many others have tried it on the AT&T model, and on the international I9505 with success.
Do I need to be on stock rom?
Yes, you need to be on stock rom for this to work.
One of the main causes of failure to unlock is people not flashing back to stock rom first. The reason is the special dial codes only work on stock roms.
Is the unlock permanent? Do the unlock last through reboot/reflash/etc.?
Yes, the unlock is permanent.
You can reflash a custom rom, or do anything you want to the phone, and the unlock will stay.
In step 7, my phone is already "SHA256_ENABLED_FLAG[0]", what should I do?
Great, this is the setting you want.
It means your phone already allows you to make some settings changes, it DOES NOT mean your phone is already unlocked.
You should continue with the rest of the process until the last step.
In step 14, backup missing.
If the golden backup doesn't exist, try the work around found by GrndSers-Rcng:
http://forum.xda-developers.com/showpost.php?p=43172004&postcount=292
How do I know the unlock is successful?
If your phone is not unlocked, when you put in an unauthorized SIM card, a dialog pops up on your phone asking you to enter the unlock code.
If you're successful with this procedure, there would be no popup dialog asking for the unlock code when you put in any SIM card.
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
no way; is this for real ?
im already unlocked, can someone confirm this ?
rock on dude.
the last step, does it somehow reset your phone back to stock?
it tells me Back-up not exist cause I pressed erase back up by accident
I've gotta find someone with a SIM from another carrier first...
Will check back with update.
i just did this, it rebooted. I need to find a ATT sim ASAP
i have tried on my t-mobile galalxy s4,it works..thx for your help!!!
update, it did not work
---------- Post added at 11:25 AM ---------- Previous post was at 11:21 AM ----------
nismo35 said:
update, it did not work
Click to expand...
Click to collapse
are u guys running the new baseband?
wavrunrx said:
no way; is this for real ?
im already unlocked, can someone confirm this ?
rock on dude.
Click to expand...
Click to collapse
yes it works dude wow
---------- Post added at 07:27 PM ---------- Previous post was at 07:26 PM ----------
kaleido said:
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
Click to expand...
Click to collapse
thank you dude i was so close to buy the unlock code thanks again u rock
connection problem or invalid mmi code
thats the message i get when i dial the number in the first step
should i be on complete stock?
im running wicked version 2 right now
TheAtheistOtaku said:
connection problem or invalid mmi code
thats the message i get when i dial the number in the first step
Click to expand...
Click to collapse
Another way to get in to the service menu is *#0011#
See this tread: http://forum.xda-developers.com/showthread.php?t=2282683
kaleido said:
Another way to get in to the service menu is *#0011#
See this tread: http://forum.xda-developers.com/showthread.php?t=2282683
Click to expand...
Click to collapse
also tried this code. still getting same message
Works
Thanks man it works
kaleido said:
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
Click to expand...
Click to collapse
TheAtheistOtaku said:
also tried this code. still getting same message
Click to expand...
Click to collapse
What can I say?
If you can't even get into the *#0011# menu, it's definitely something wrong with your rom.
Try flash back to stock, and repeat the unlock.
kaleido said:
Hi Everyone,
I'm a long time lurker and benefited greatly from the postings here at xda.
So I'd like to contribute something back.
After trying many methods and reading all the posts in the various S4 forums, I finally found a way for SIM unlock that works for me.
I have tested it, and it works on my T-Mobile S4.
Credit to these posts:
KaneHusky's post for the dialer code
This thread on how to unlock
chavxxx's post pointing to the right final step
Here are the steps:
Goto phone dailer, and enter *#27663368378# for the debug service menu.
In "ServiceMode", select [1] UMTS
In "UMTS MAIN MENU", select [1] DEBUG SCREEN
In "DEBUG SCREEN", select [6] PHONE CONTROL
In "PHONE CONTROL", select [6] NETWORK LOCK
In "NETWORK LOCK", select [3] PERSO SHA256 OFF
It should show:
SHA256_ENABLED_FLAG[1]
SHA256_OFF => SHA256_ON
Now touch the first line SHA256_ENABLED_FLAG[1]
It should show:
MENU NOT EXIST
PRESS BACK KEY
Current Command is 116631
Now press the menu button and select "Back"
It should show:
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Again, press the menu button and select "Back", and you're back in the "NETWORK LOCK" screen
Press the menu button and select "Back", and you're in the "PHONE CONTROL" screen
Press the menu button and select "Back", and you're in the "DEBUG SCREEN" screen
Finally, press the menu button and select "Back", and you're back in the "UMTS MAIN MENU" screen
Select [6] COMMON
In "COMMON" screen, select [6] NV REBUILD
Now you are in the "NV REBUILD" screen, you should see the following text:
------------------------------
Golden-Backup exist
You can Restore Cal/NV
------------------------------
Now for the final step.
In "NV REBUILD" screen, select [4] Restore Back-up
The button lights for menu and back should come on, and the phone will auto reboot in a few seconds.
Note: chavxxx's post of selecting "[1] Load default NV" DID NOT work for me.
Congratulations, your phone is now unlocked.
Stick in a sim card from a different carrier and try it out.
Please post followups of your experience with this unlock method.
Thanks, and good luck!
Click to expand...
Click to collapse
When i started the process mine said this at the beginning:
SHA256_ENABLED_FLAG[0]
I believe that was the desired result, but i didn't have to do anything, mine is already set there (step 6) ....I don't have an Att Sim to try, but when my buddy gets home i am going to see if mine came factory unlocked....
spaided said:
When i started the process mine said this at the beginning:
SHA256_ENABLED_FLAG[0]
I believe that was the desired result, but i didn't have to do anything, mine is already set there (step 6) ....I don't have an Att Sim to try, but when my buddy gets home i am going to see if mine came factory unlocked....
Click to expand...
Click to collapse
Same here, Got to this part of the process and I'm already at SHA256_ENABLED_FLAG[0].
spaided said:
When i started the process mine said this at the beginning:
SHA256_ENABLED_FLAG[0]
I believe that was the desired result, but i didn't have to do anything, mine is already set there (step 6) ....I don't have an Att Sim to try, but when my buddy gets home i am going to see if mine came factory unlocked....
Click to expand...
Click to collapse
Mine is same as yours & I won't be able to test mine out until the wkend when I see my GF since she's on AT&T. Do let use know your results when you are able to.
awesome.... next stop... AOSP direct from Google. in June, I believe? haha :good:
RMXO said:
Mine is same as yours & I won't be able to test mine out until the wkend when I see my GF since she's on AT&T. Do let use know your results when you are able to.
Click to expand...
Click to collapse
I should be able to try it in about 2 hours or so when i get home with the gf's att phone.
It works, confirmed. Placed an ATT sim in my t-mobile and made a call.. Awesome!