Related
I have a bootloader unlocked HTC one X running on 1.28. I got the 1.29 update notification today, but it kept failing when I try to install it. I am on Clockworkmod. It says cannot mount SD card. And I renamed it and deleted the assert cid thing, it failed without a reason.
And I tried to flash back to stock recovery, it still did not work. Do I really need to lock the bootloader to get this work? That's so troublesome.
Anyone can help me? Thank you very much in advance.
hy3301 said:
I have a bootloader unlocked HTC one X running on 1.28. I got the 1.29 update notification today, but it kept failing when I try to install it. I am on Clockworkmod. It says cannot mount SD card. And I renamed it and deleted the assert cid thing, it failed without a reason.
And I tried to flash back to stock recovery, it still did not work. Do I really need to lock the bootloader to get this work? That's so troublesome.
Anyone can help me? Thank you very much in advance.
Click to expand...
Click to collapse
You need to flash stock recovery. bootloader doesnt matter. Are you in europe?
hy3301 said:
I have a bootloader unlocked HTC one X running on 1.28. I got the 1.29 update notification today, but it kept failing when I try to install it. I am on Clockworkmod. It says cannot mount SD card. And I renamed it and deleted the assert cid thing, it failed without a reason.
And I tried to flash back to stock recovery, it still did not work. Do I really need to lock the bootloader to get this work? That's so troublesome.
Anyone can help me? Thank you very much in advance.
Click to expand...
Click to collapse
as far as i did my last OTA am on a branded phone. I restored my backup stock rom installed stock recovery and downloaded the OTA and installed fine. No need to relock bootloader or anything else. have you tried rebooting your phone and trying again? or have you flashed the proper stock recovery mate
Doesn't work for me either,puted the stock restore,i even relocked my bootloader and still nothing,it doesn't seem to work,i will try to update trough recovery mode,hope that will work.
Sent from my HTC One X using XDA
Same here, any solutions
I don't think that i will try to update to 1.29 anymore,i read on a site that 1.30 will be lauched very soon,so i will try to update to 1.30 when it will came up.I don't know what else to do,i mean,i've tryed everything and still no luck with this update.
I have exactly same issue as you,but what I think if its be realise of 1.30 for us be same problem if we don't find any solution now.
I'm in Japan. I've tried that, nothing worked.
Mine is unbranded. I've tried all of them. I've had enough of it.
It won't work. Don't waste your time.
No solutions seemed to work so far. My choice is to ignore it.
Yes, me too. No more 1.29.
Same here, was 1.28 and unlocked the bootloader and rooted. Tried CWM method but doesn't work and hope someone will have solution to this.
I have same problems i surf a lot today,and I find that my problem is that 1.29 Update CID is different from my phone CID. U can get u CID by cidgetter from store. And if u try to flash update by cwm it shows what Phone CID's supporting update witch u have. Just try to check this guys,thats what i find and my opinion it should work.
I think my solution to find update witch supports HTC__001 CID
So basicaly you are saying to download the update and then reboot the phone,enter in recovery mode (cwm) and then try to flash the 1.29 update that we've downloaded?i allready tryed that and it doesn't work,gives me an error and stops.if it's a CID problem can't we just put our HOX CID into the update?i think that i've seen somewhere on xda a metod to do that but i don't remember in which topic.
Sent from my HTC One X using XDA
if it possible to change CID in update,so yeas its solution witch we need. But I don't know how to do it.
I think we will skip the 1.29 update and wait for the next one.I'v just read on the forum that version 1.32 was released (nothing confirmed yet,just some pc screenshots),maybe that version will work.I will check periodicaly for the 1.32 update and see if it works.
I found a thread talking about deleting the lines about CID in a update-script file or something similar. I've tried that, but still ended up with error. I am going to give up.
Did any of you flashed something on 1.28?I am thinking that after i updated to 1.28 i flashed the 3 dot removal.Maybe this is the cause that the update fails?
I haven't flashed anything,just rooted flashed cwm and superU. No updates gonna work for us till we get S-OFF its just one solution. Follow guys in S-OFF Discussion they progressed a lot on it. If they crack our S-ON to S-OFF we can do with our phones whatever we want to do. And install whatever we want to install including updates. Now just wait...
HELP, I've bricked my phone.
I'll try to be as brief as possible.
I had android 5.0.1 (4.16.401.10). unlocked bootloader, installed TWRP, rooted.
a few months later today, my phone had an OTA update notification (4.16.401.13), tried to do it, failed and it kept sending me to TWRP.
Googled it, people said I should restore the stock recovery, I did, tried to install the OTA again. phone got stuck on splash screen.
From there I have been online for hours trying to fix this but nothing. (there has been many flashing attempts, some fail some success) so the phone is pretty much a mess now.
My question is, what's the easiest way (if there is) to just restore the phone to stock firmware? I don't care if it's going to be rooted or not, I don't care if It's going to be wiped, I just need it to work.
Currently I have (relocked) bootloader, S-On
Thanks.
Same problem here, Got this update yesterday and stuck at the splash screen.
rooted, S-on, stock recovery
tried everything from changing recovery, FUU, RUU, nothing worked
Fortunately, I have full NAND backup months ago ( old,but better than nothing), restore it, update the new update and everything looks ok so far.
I suspect its related to the xposed relared problem as the old backup its not installed.
AHOHA said:
Fortunately, I have full NAND backup months ago ( old,but better than nothing), restore it, update the new update and everything looks ok so far.
Click to expand...
Click to collapse
Sorry if this is a noob question, but how can I do that? is there somewhere where I can download backups and restore them on my phone? And if so, will I need anything like an S-Off or something?
Because I've tried everything else I think, I tried RUU (both from PC or from bootloader, and with both Unlocked and Relocked bootloader) and nothing seems to work.
Hi there, got the same problem just dont have nan backup so i'm stucked.
Phone is rooted, unlocked, s-on
cid: VODAP001
mid: 0P6B10000
got latest twrp.
Tried to flash 2 (diferent date builds) roms acording to my cid, NO LUCK,
tried ruu - no luck
read hundrets of pages and found only one thing that I need is S-OFF, but how can I do s-off when my phone doesnt boot up?
pls help
mizaras said:
Hi there, got the same problem just dont have nan backup so i'm stucked.
Phone is rooted, unlocked, s-on
cid: VODAP001
mid: 0P6B10000
got latest twrp.
Tried to flash 2 (diferent date builds) roms acording to my cid, NO LUCK,
tried ruu - no luck
read hundrets of pages and found only one thing that I need is S-OFF, but how can I do s-off when my phone doesnt boot up?
pls help
Click to expand...
Click to collapse
I finally got mine to work today!!
What worked with me is this:
I got the RUU Zip file for my CID, renamed it to 0P6BIMG.zip , and copied it to the root of my SD Card (using an adapter or using TWRP to mount it)
then I flashed the stock recovery for my phone, then RELOCK your bootloader (fastboot oem lock)
Onve you've done all that just put the SD card in your phone and boot it in bootloader mode (Vol Down + Power) and it should detect the 0P6BIMG.zip file automatically and ask you if you want to update it.
P.S: I have S-On and it worked.
I hope this helps.
I have an s off unlocked phone. Any of you know if its possible to downgrade to an older update? The new us update is affecting my calls and signal so i need to go back.
Just run the old RUU exe and you'll be set.
Sent from my HTC 10 using Tapatalk
effortless said:
Just run the old RUU exe and you'll be set.
Click to expand...
Click to collapse
Depends. If his handset is s-on he can't "just" run the old ruu. With s-on you can't downgrade the bootloader to a lower version.
So it's either doable with s-off or look for the OS via a backup and try to restore that and run it on the new firmware.
Mr Hofs said:
Depends. If his handset is s-on he can't "just" run the old ruu. With s-on you can't downgrade the bootloader to a lower version.
So it's either doable with s-off or look for the OS via a backup and try to restore that and run it on the new firmware.
Click to expand...
Click to collapse
They state they have an s-off unlocked phone in their first sentence.
Sent from my HTC 10 using Tapatalk
I have HTC10 with s-off and trying to revert to stock with ruu and keep getting error message with wrong version.
pocutzz said:
I have HTC10 with s-off and trying to revert to stock with ruu and keep getting error message with wrong version.
Click to expand...
Click to collapse
Please post the error, so we can see it and help.
andybones said:
Please post the error, so we can see it and help.
Click to expand...
Click to collapse
So in the meantime i reflashed twrp and recovery and restored a backup.
But in the conclusion all i want now is to revert to full stock (i have no backup of that). Can i do that with s-off and bootloader re-locked? the reason that i want to do that is to recieve further updates ota. The reason i did all this to my phone was because the 4g was working when it wanted (not only 4g but mobile data in general). Now i'm thinking of reversing to stock, maybe future updates will solve this or to send the phone back for waranty.
So i need to flash stock, can you guide me from this point to achieve that?
My current software is 1.95.401.3, the phone was unlocked but not developer edition.Cid is HTC__34.
Help me what to do next and i will do one by one until i succeed (sry for my bad english)
@pocutzz you need SuperCID. In download mode, connect phone to pc and open a command window on your computer, type out "fastboot oem writecid 11111111" (I advice you copy and paste this but without the quotation marks), and then you will gain SuperCID. With this, you will be able to install any firmware/RUU regardless of CID.
@ OP, if you want to downgrade, since you are S-OFF there is no need to relock bootloader. As long as your have SuperCID you can downgrade to any firmware just like that. Download RUU and run it.
ZeroInfinity said:
@pocutzz you need SuperCID. In download mode, connect phone to pc and open a command window on your computer, type out "fastboot oem writecid 11111111" (I advice you copy and paste this but without the quotation marks), and then you will gain SuperCID. With this, you will be able to install any firmware/RUU regardless of CID.
@ OP, if you want to downgrade, since you are S-OFF there is no need to relock bootloader. As long as your have SuperCID you can downgrade to any firmware just like that. Download RUU and run it.
Click to expand...
Click to collapse
But after i do super cid what version do you recomend to flash? it will be full stock after? i will be able to recieve updates ota?
pocutzz said:
But after i do super cid what version do you recomend to flash? it will be full stock after? i will be able to recieve updates ota?
Click to expand...
Click to collapse
if you RUU you should still be able to receive OTA afterwards but don't count on me for that one as I've never restored back to stock before. You can search for previous HTC 10 RUUs on google, I recommend not going too far back and just going on the update before the 1.95 one (1.90 I think). Not every version has an RUU so if you can't find an RUU you want, try and find an older version.
ZeroInfinity said:
if you RUU you should still be able to receive OTA afterwards but don't count on me for that one as I've never restored back to stock before. You can search for previous HTC 10 RUUs on google, I recommend not going too far back and just going on the update before the 1.95 one (1.90 I think). Not every version has an RUU so if you can't find an RUU you want, try and find an older version.
Click to expand...
Click to collapse
There is one on the htc website like unlocked/developer edition like 1.91 XXXX , think that will be ok?
pocutzz said:
There is one on the htc website like unlocked/developer edition like 1.91 XXXX , think that will be ok?
Click to expand...
Click to collapse
It should be fine, yes. Make sure you have SuperCID and remember that you do not have to relock your bootloader when running the RUU as you are already S-OFF
ZeroInfinity said:
It should be fine, yes. Make sure you have SuperCID and remember that you do not have to relock your bootloader when running the RUU as you are already S-OFF
Click to expand...
Click to collapse
i re-locked before i run sunshine for s-off. i will try to do that in a few minutes
i have done superCID, but before i try to flas the ruu, wanted to ask you, after that what remains? like s-off,root,twrp,custom recovery?
Okey so i did the superCID, in download mode it shows me the 1111111 but on the phone when i run CID Getter still says HTC__034 (that is how it suppose to show?), i copied from here like you said.Downloaded the ruu.exe from htc website,and when it runs it resets my phone to download mode,the bar goes instantly to 100% and the ruu installer says the 155 error,incorect version i think.
What do i do next?
Maybe MID problem?i've read something about it for HTC M8 i have mid 2PS620000. Maybe the ruu.exe on htc website is for US and i need EU?
Later edit: So i put the global variant with .401. in the sd card and it started to flash, i will se what is what...
pocutzz said:
i have done superCID, but before i try to flas the ruu, wanted to ask you, after that what remains? like s-off,root,twrp,custom recovery?
Okey so i did the superCID, in download mode it shows me the 1111111 but on the phone when i run CID Getter still says HTC__034 (that is how it suppose to show?), i copied from here like you said.Downloaded the ruu.exe from htc website,and when it runs it resets my phone to download mode,the bar goes instantly to 100% and the ruu installer says the 155 error,incorect version i think.
What do i do next?
Maybe MID problem?i've read something about it for HTC M8 i have mid 2PS620000. Maybe the ruu.exe on htc website is for US and i need EU?
Later edit: So i put the global variant with .401. in the sd card and it started to flash, i will se what is what...
Click to expand...
Click to collapse
S-OFF will never be wiped, if you have relocked then it will remain relocked state. Everything else is wiped and restored to stock including recovery, system, data, Internal Storage MIGHT BE WIPED I am not so sure.
if it shows SuperCID in download mode it should be fine. All you needed to do to get it was to execute that command line I posted before.
ZeroInfinity said:
S-OFF will never be wiped, if you have relocked then it will remain relocked state. Everything else is wiped and restored to stock including recovery, system, data, Internal Storage MIGHT BE WIPED I am not so sure.
if it shows SuperCID in download mode it should be fine. All you needed to do to get it was to execute that command line I posted before.
Click to expand...
Click to collapse
thank You for the info.i just flashed from sd card the 401 version, an got the updates,think everything is okey,i will write again after all is good. Ty very much
about 3 friends of mine have bricked htc 10 when trying to downgrade the firmware (Sprint, KKDI and unlocked variant all s-off) I want to ask if I can use the image to sdcard method to unbrick ???
Hey everyone, so I am pretty sure I bricked my HTC10.
To Start off my specs are the HTC 10 Unlocked version
htc_pmewl
CID: BS_US001/BS_US002
MID: 2PS650000
OS: 1.80.617.1
OpenDSP: 18.2.8996.00524_0321
(orignially Stock ROM)
I was trying to reset everything to stock settings before I returned the phone (Unrooting, Locked Bootloader, Stock Recovery, etc) and everything was going fine until after I rewrote the S-OFF flag to S-ON (I'm pretty sure it happened there, maybe when I relocked the bootloader?). Now I don't have a ROM, the CID and MID's are missing on the fastboot (download-mode) page. The Bootloader is relocked, and I have a stock recovery.
I tried going here to get the RUU's and everything to fix what I had done. However the RUU.exe gives me a error 120 Low Battery when I run it (Even though I have a fully charged battery). I tried going to a different PC to run the RUU, but the RUU never runs past the initial install.
I also tried re-unlock the bootloader so I could reinstall TWRP and flash that way. Unlocking went fine, but when I try to flash the twrp img via fastboot I get an error (9 RU_SECURITY_FAIL recovery and bootloader isn't BL_UNLOCKED).
I'm really at my wits end here. I haven't actually done anything this stupid in all of my customizing my M8, S6, Razr or all my tablets so I honestly don't know what to do. If you guys could throw me a lifeline I'd be grateful.
Thanks
Have you tried doing a factory reset using the stock recovery?
See if you can get a system.img to flash manually. If you can get an OS boot you should be able to fix your device.
tkoreaper said:
Have you tried doing a factory reset using the stock recovery?
Click to expand...
Click to collapse
Using the adb shell command (recovery --wipe_data)? Yeah I've tried that, but I get a device not found error. adb isn't working right now, however I am still able to get fastboot commands, and the phone recognizing them at least. Otherwise, no I haven't what would I need to do?
@tw1tch175 is right. Try to find an untouched system image first and try to flash it in download mode.
Could you in addition tell a bit more about what you did to reset the device to stock instead of flashing a RUU in the first place prior to writing secureflag 3!? And further more what did you do prior to it, did you flash unsigned firmware, or one of the "no red text on boot" aboot provided here!?
Sent from my HTC 10 using XDA Labs
Are you making sure you are in download mode for fastboot commands. Also double check your driver in the device manager.
Edit: woops re-read, and he meant use the UI in the factory recovery to reset
5m4r7ph0n36uru said:
@tw1tch175 is right. Try to find an untouched system image first and try to flash it in download mode.
Could you in addition tell a bit more about what you did to reset the device to stock instead of flashing a RUU in the first place prior to writing secureflag 3!? And further more what did you do prior to it, did you flash unsigned firmware, or one of the "no red text on boot" aboot provided here!?
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Sure. I originally ran the factory wipe/reset via the ROM (Which was the stock rom). Then after that I booted up into the download mode, tried relocking the bootloader with fastboot oem lock. I also flashed the stock recovery for my model. Once I saw that I had the stock recovery on, the bootloader was locked, and everything else, I tried to do a twrp restore and relock it, but it wasn't working so I said "Screw it" and rewrote the secureflag, rebooted and...yeah everything was gone.
The only thing I did before all of this was when I got the phone unlock the bootloader, SOFF, Custom Recovery, and sideload super SU for root. The only "unofficial" radios/firmware/etc I had was the Verizon Radio on my phone.
Other than that I kept it clean. I'm looking for an image now to try that.
tw1tch175 said:
Are you making sure you are in download mode for fastboot commands. Also double check your driver in the device manager.
Edit: woops re-read, and he meant use the UI in the factory recovery to reset
Click to expand...
Click to collapse
Yes. I just figured that out while searching haha. I did go through and use the UI, but I had no luck. I am looking for an img like you said but I am not having luck so far. Is there one of the Stock guide on my original post?
Ok so for ALL HTC the only proper way to s-on is to use fastboot/download and for oem writesecureflag 3, you should NEVER EVER EVER us echo/dd /hexeditor to go s-on.
For 2016+ phones, you should use sunshine or another tool to go from unlock/relocked to lock, do NOT use anything not designed for the phone in question, or attempt to do it manually. I can only vouch for SunShine's capability to safely change the bootloader status, I can't vouch for any other method or tool. I know SunShine does it right.
See http://forum.xda-developers.com/htc-10/how-to/psa-htc-10-s-off-s-lock-unlock-t3371264 for my PSA on the subject.
If the phone won't flash with a proper RUU, well you need to find someone with a EMMC write tool to rewrite all your firmware, this is probably going to run $100-200.
bob3rt said:
Hey everyone, so I am pretty sure I bricked my HTC10.
To Start off my specs are the HTC 10 Unlocked version
htc_pmewl
CID: BS_US001/BS_US002
MID: 2PS650000
OS: 1.80.617.1
OpenDSP: 18.2.8996.00524_0321
(orignially Stock ROM)
I was trying to reset everything to stock settings before I returned the phone (Unrooting, Locked Bootloader, Stock Recovery, etc) and everything was going fine until after I rewrote the S-OFF flag to S-ON (I'm pretty sure it happened there, maybe when I relocked the bootloader?). Now I don't have a ROM, the CID and MID's are missing on the fastboot (download-mode) page. The Bootloader is relocked, and I have a stock recovery.
I tried going here to get the RUU's and everything to fix what I had done. However the RUU.exe gives me a error 120 Low Battery when I run it (Even though I have a fully charged battery). I tried going to a different PC to run the RUU, but the RUU never runs past the initial install.
I also tried re-unlock the bootloader so I could reinstall TWRP and flash that way. Unlocking went fine, but when I try to flash the twrp img via fastboot I get an error (9 RU_SECURITY_FAIL recovery and bootloader isn't BL_UNLOCKED).
I'm really at my wits end here. I haven't actually done anything this stupid in all of my customizing my M8, S6, Razr or all my tablets so I honestly don't know what to do. If you guys could throw me a lifeline I'd be grateful.
Thanks
Click to expand...
Click to collapse
bob3rt said:
Sure. I originally ran the factory wipe/reset via the ROM (Which was the stock rom). Then after that I booted up into the download mode, tried relocking the bootloader with fastboot oem lock. I also flashed the stock recovery for my model. Once I saw that I had the stock recovery on, the bootloader was locked, and everything else, I tried to do a twrp restore and relock it, but it wasn't working so I said "Screw it" and rewrote the secureflag, rebooted and...yeah everything was gone.
The only thing I did before all of this was when I got the phone unlock the bootloader, SOFF, Custom Recovery, and sideload super SU for root. The only "unofficial" radios/firmware/etc I had was the Verizon Radio on my phone.
Other than that I kept it clean. I'm looking for an image now to try that.
Click to expand...
Click to collapse
So as I thought. You indeed flashed - at least parts - of an unofficial firmware. Prior to relocking the bootloader with SunShine, as well as setting S-ON you should've taken care that ALL its stock. A simple factory reset in the ROM settings wasn't enough.
I'd guess that the wrong radio led to a problem when booting with stock recovery of your ROM, relocked bootloader and secureflag set to S-ON.
If I saw it correctly all RUUs for your device are *.exe files. Best would be to extract the ROM.zip from this exe, using 7zip, rename it to 2PS6IMG.zip, place it on an external SDCard (formatted extFAT or FAT32) and reboot to download mode, to give it a shot.
Hope this will help.
Edit: ... nvm... @jcase ninja'd me. Wanted to post the exact same link.
Sent from my HTC 10 using XDA Labs
5m4r7ph0n36uru said:
So as I thought. You indeed flashed - at least parts - of an unofficial firmware. Prior to relocking the bootloader with SunShine, as well as setting S-ON you should've taken care that ALL its stock. A simple factory reset in the ROM settings wasn't enough.
I'd guess that the wrong radio led to a problem when booting with stock recovery of your ROM, relocked bootloader and secureflag set to S-ON.
If I saw it correctly all RUUs for your device are *.exe files. Best would be to extract the ROM.zip from this exe, using 7zip, rename it to 2PS6IMG.zip, place it on an external SDCard (formatted extFAT or FAT32) and reboot to download mode, to give it a shot.
Hope this will help.
Edit: ... nvm... @jcase ninja'd me. Wanted to post the exact same link.
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Ah gotcha. That makes sense. Wouldn't have been the only thing that slipped my mind. I lost access to my Steam authenticator too. I was able to get the zip from the exe file like you said, after I put that on an SD card and boot to download mode do I just fastboot flash zip?
If there's one thing I remember when using Sunshine to go S-OFF on two different HTC 10's it was that it mentioned something about going S-ON and how something wasn't guaranteed, I forget what exactly, but if I remember correctly I understood it as you shouldn't go back to S-ON because it wasn't guaranteed to work or something like that. Anyone know what I'm talking about?
tkoreaper said:
If there's one thing I remember when using Sunshine to go S-OFF on two different HTC 10's it was that it mentioned something about going S-ON and how something wasn't guaranteed, I forget what exactly, but if I remember correctly I understood it as you shouldn't go back to S-ON because it wasn't guaranteed to work or something like that. Anyone know what I'm talking about?
Click to expand...
Click to collapse
That is in regards to wiping data, earlier versions of sunshien wiped data on all htc 10 going s-off, thats not the issue here. Issue here is he improperly set the phone lock/s-on. Gotta use sunshine to set it locked, and fastboot to set s-on.
Hey Everyone just wanted to give an update since yesterday evening.
Just wanted to give out some props to @5m4r7ph0n36uru . Following his advice of extracting the Rom.zip from RUU .exe I was able to run it in download mode and loaded up an OS on the phone. So Now I am unbricked! Yay. I had to find out how to do that using process monitor and everything, but it was a success. and I can breathe easy. Thankfully doing that was easier that doing the Database call handler stuff from today at work XD
Thankfully my lesson is learned and I'll flash correctly to full stock next time. Thank you all for your help in the matter.
bob3rt said:
Hey everyone, so I am pretty sure I bricked my HTC10.
To Start off my specs are the HTC 10 Unlocked version
htc_pmewl
CID: BS_US001/BS_US002
MID: 2PS650000
OS: 1.80.617.1
OpenDSP: 18.2.8996.00524_0321
(orignially Stock ROM)
I was trying to reset everything to stock settings before I returned the phone (Unrooting, Locked Bootloader, Stock Recovery, etc) and everything was going fine until after I rewrote the S-OFF flag to S-ON (I'm pretty sure it happened there, maybe when I relocked the bootloader?). Now I don't have a ROM, the CID and MID's are missing on the fastboot (download-mode) page. The Bootloader is relocked, and I have a stock recovery.
I tried going here to get the RUU's and everything to fix what I had done. However the RUU.exe gives me a error 120 Low Battery when I run it (Even though I have a fully charged battery). I tried going to a different PC to run the RUU, but the RUU never runs past the initial install.
I also tried re-unlock the bootloader so I could reinstall TWRP and flash that way. Unlocking went fine, but when I try to flash the twrp img via fastboot I get an error (9 RU_SECURITY_FAIL recovery and bootloader isn't BL_UNLOCKED).
I'm really at my wits end here. I haven't actually done anything this stupid in all of my customizing my M8, S6, Razr or all my tablets so I honestly don't know what to do. If you guys could throw me a lifeline I'd be grateful.
Thanks
Click to expand...
Click to collapse
Hello,
Just to inform that if I try to run RUU.exe from PC when the phone is in bootloader menu, I get battery low error. However, if I "boot to download mode" in the bootloader menu, I can run the RUU.exe from the computer without any error.
I have an HTC One M9 that up until yesterday had an unlocked bootloader and had S-Off.
It was running a pretty old ROM so I decided to update it. My first attempt was Viper.
After installing through TWRP recovery it would only take me to the TWRP boot screen after rebooting.
I attempted another ROM, this time Revolution and got the same results.
I’ve been messing with it for hours and somehow I have S-ON and the bootloader is locked. Actually it says RELOCKED.
It has no OS and it will no longer go to Recovery mode. I think the TWRP I tried to install is too new for it.
I’ve performed the HTC bootloader unlock procedure a few times and although it says successful, after reboot, its still relocked.
Am I screwed, or is there something more I can try?
If bootloader is looked, the only solution is to try to flasher the latest ruu according to the model of your M9. It goes into downloading mode??
Dark Stranger said:
If bootloader is looked, the only solution is to try to flasher the latest ruu according to the model of your M9. It goes into downloading mode??
Click to expand...
Click to collapse
Yes, it goes into download mode. I've tried the only Telus ruu I could find (RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_3.35.617.31.exe)
and I get a Error 131 Customer ID Error.
I just tried a Sprint ruu (RUU_HIMA_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_3.41.651.21.exe) and I got Error 155 Unknown Error. They both fail right after it displays Updating Signatures.
I'm in Canada and it's a Telus phone but it's carrier unlocked.
Do I need to use a Telus RUU or should any Canadian RUU work on it?
are you sure yours already s-off?
1. re flash lastest TWRP
2. flash required lastest firmware (s-off)
Firmware 3.35.401.12 is required for proper installation! Download (S-OFF ONLY)
3. flash your fav lastest custom rom
Yes, it's definitely S-On.
Any Canadians out there? After some reading I realize I need an RUU of a specific sku. In my case 661.
I need a Telus RUU of 2.11.661.5 or higher for the M9. I'm hoping that will resolve my issue.