i've broken my phone! - Galaxy Ace II Q&A, Help & Troubleshooting

So i have my I8160 and i have 4 different recoveries. CWM 4.0.5.6 and 4.0.2.8 and also TWRP 2.8.6.0 and 3.0.2.0. Yeah i know it is strange but just let me explain you. I rooted my device and then installed CWM 4.0.2.8. Then I flashed ChronoKernel and restarted the device. It rebooted into CWM 4.0.5.6 and i wipe everything and tried to install CM13 + ggaps. Unfourtunately the installation of ggaps ended with code 70. I booted the phone and it showed off only 1GB of storage! I quickly restarted the device to flash the ROM once more and suprisingly it booted into TWRP 3.0.2.0. I tried to install CM13 and CM12.1. CM12.1 just stucks at Optimizing apps 48/88 and CM13 does not detect smth like internal storage... I think CM11 is a bit too old for me so i want a bit more fresh OS. Do you have any suggestions how can i fix this memory problem?

First of all, you don't have 4 different recoveries. It's just that each ROM /kernel installation also installs their own recovery.
Anyway, I think you should start fresh. Flash 3 parted JB, then follow the appropriate steps given by the developers
Sent from my GT-I8160 using Tapatalk

So i should just download the firmware and flash it using odin right?

And i just want to add that mobile network connection is not working, on stock it was

Try using this: http://d-h.st/AZN
To solve mobile network connection issue, make sure that before you flash a custom ROM that you are already on JB stock ROM

So i flashed JB and i can not set up my phone because Google processes crash all the time. But i dont see Mobile network connection.

punfil said:
So i flashed JB and i can not set up my phone because Google processes crash all the time. But i dont see Mobile network connection.
Click to expand...
Click to collapse
Did you do a factory reset?

It is now working dont worry, but still no mobile network

punfil said:
It is now working dont worry, but still no mobile network
Click to expand...
Click to collapse
Did you go with the 3 parted firmware?
Then, flash JB?

I had Cm12.1 then i flashed one-parted firmware from SamMobile. I did a factory reset after that and i am working on it now.
Now i am going to flash yours firmware

Your firmware already flashed. Mobile network still not working

..

Related

[Q] Can't install new ROMs

So I'm currently running Cyanogenmod version 10.2.0 .. Android 4.3.1.
I've updated to the newest version of TWRP.
I factory wipe, then try to install a different ROM.. for example I've tried PA & AOKP.
Every time I try this it fails within 1 second and I have to restore a backup and go back to Cyanogenmod.
EDIT: I have a T-Mobile Galaxy S3
I have attached an image of when I get an error when I try to flash.
UPDATE:
Alright so I was able to get past that error by going into advanced wipe and selecting "System". Now when I flash I get a new error. I am attaching a new picture.
You need to give more info on the error
Sent from my SGH-M919 using Tapatalk
serio22 said:
You need to give more info on the error
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm at work now. I'll post and update with the error later.
Do you have a t-mobile s3? If you are from a different carrier such as wind mobile I could know the problem. I also had a problem flashing 4.3 Roms with my t999v wind s3.
Sent from my SGH-T999 using xda app-developers app
spartan268 said:
Do you have a t-mobile s3? If you are from a different carrier such as wind mobile I could know the problem. I also had a problem flashing 4.3 Roms with my t999v wind s3.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Mine is T-Mobile. I'm still at work til 2AM EST. I'll probably post my error tomorrow.
Alright guys, I attached a screenshot (picture lol) of my phone and the error I am getting when I try to flash different ROMs. Any help?
Alright guys.. I was able to get past that other error but now I have a new one when trying to install a new ROM.
Here is a screenshot of the error.
Shallwhat said:
Alright guys.. I was able to get past that other error but now I have a new one when trying to install a new ROM.
Here is a screenshot of the error.
Click to expand...
Click to collapse
Update your recovery. You're using TWRP 2.5.5.0 when the latest one is 2.6.3.1. If you can't boot into Android, Odin the TWRP recovery. Also, make sure you completely wipe your internal storage before flashing a custom ROM. If that custom ROM isn't working for you, try another one to see if that flashes since that would indicate that the custom ROM you're trying to flash could potentially be a bad download.
You also need to post more information about your phone.
Which custom ROM are you using?
Which kernel are you using or trying to use?
etc etc.
Noobiologist said:
Update your recovery. You're using TWRP 2.5.5.0 when the latest one is 2.6.3.1. If you can't boot into Android, Odin the TWRP recovery. Also, make sure you completely wipe your internal storage before flashing a custom ROM. If that custom ROM isn't working for you, try another one to see if that flashes since that would indicate that the custom ROM you're trying to flash could potentially be a bad download.
You also need to post more information about your phone.
Which custom ROM are you using?
Which kernel are you using or trying to use?
etc etc.
Click to expand...
Click to collapse
I've tried flashing multiple ROMS.. Slimbeam.. AOKP.. ParanoidAndroid.. I've downloaded from GOOManager and I've also downloaded from external links and put on my external SD card. Nothing works. Like I said in the OP I am running Cyanogenmod 10.2.. Android 4.3.1. I'm using the Ktweaker kernel.
I updated my TWRP from Goomanager and it only updated to 2.5.5.0. How do I get it to update to 2.6.3.1?
So I just went to update TWRP from goomanager again and when it went to download it failed because "invaid MD5 sum".
Edit: So I tried updating again and it said it was successful. I rebooted into recovery and it still says 2.5.0.0
I'm lost.
Same problem happened to me last night, I tried to install the modem again but the same error keep coming up.
To everyone with issues updating recovery. Goo has a openrecovery script issue. Your best bet is to flash latest Recovery using Odin. You may choose to use Mobile Odin if you feel like it.
Can't restore anything except Kitkat
I keep getting the same error, except I can't flash or restore any rom that isn't kitkat (all the kitkat roms are buggy so i want 4.3 back). I reflashed twrp 2.6.3.1 with odin but its still not letting me flash anything.
Also if it helps I can't copy anything from the internal SD to the external SD using twrp file manager.
Older Rom's backups can't be restored due to file system changes. You will have to wipe everything and flash fresh if you want 4.3
I tried the latest version of TWRP, and I'm on StockROM by TeamInferno. I got V7 and I saw an update on it last night (V8) so I downloaded it and tried to install it fom Clockworkmod recovery and it didn't work so I tried TWRP and the same thing happened. Do I have to wipe everything to update my ROM?
Nothing will flash except Kitkat
Perseus71 said:
Older Rom's backups can't be restored due to file system changes. You will have to wipe everything and flash fresh if you want 4.3
Click to expand...
Click to collapse
Ive tried that multiple times. once the Odin flashable tw 4.3 downloads, I'm going to try that but I can't flash any fresh roms using twrp except 4.4 (Jellybam to be specific).
I tried Stockorama 4.3 tw, but it would just reboot after getting past the "samsung galaxy sIII" screen (tried insecure kernal too). I'm wondering if I'm in a weird soft brick or something
Shallwhat said:
So I just went to update TWRP from goomanager again and when it went to download it failed because "invaid MD5 sum".
Edit: So I tried updating again and it said it was successful. I rebooted into recovery and it still says 2.5.0.0
I'm lost.
Click to expand...
Click to collapse
Did odin flash of the most current recovery take care of your issue?
Hastily spouted for your befuddlement
GodLik3 said:
I tried the latest version of TWRP, and I'm on StockROM by TeamInferno. I got V7 and I saw an update on it last night (V8) so I downloaded it and tried to install it fom Clockworkmod recovery and it didn't work so I tried TWRP and the same thing happened. Do I have to wipe everything to update my ROM?
Click to expand...
Click to collapse
What was the specific error message when flashing ?
QuatroQuatro said:
Ive tried that multiple times. once the Odin flashable tw 4.3 downloads, I'm going to try that but I can't flash any fresh roms using twrp except 4.4 (Jellybam to be specific).
I tried Stockorama 4.3 tw, but it would just reboot after getting past the "samsung galaxy sIII" screen (tried insecure kernal too). I'm wondering if I'm in a weird soft brick or something
Click to expand...
Click to collapse
What is your TWRP Version ? Also what is your Bootloader version ? (No its not the baseband)
My bootloader is T999UVUEMJC
My baseband is uvuemjc
TWRP is version 2.6.3.1 (I've also tried 2.6.3.0)
I think it got updated bootloader/baseband when I odin flashed stock tw 4.3 (the only jellybean ROM that works)
I also made a backup of my 4.4, but it wouldn't let me restore even that.
You have been talking about 2 different things.
1. Flash a New Rom - Either Touchwiz or AOSP. $.3 or newer.
2. Restore a Rom - I think you are talking about a Nandroid Restore.
If you are referring to Point 1 as "Restore Rom" then you need to change terminology in order to help us understand your problem correctly. Re-Flashing a rom that you used to have is still Flashing not "Restore".
With that UVUEMJC Bootloader, you can completely forget about flashing previous Touchwiz Firmwares such as UVDMD5 or UVDLJC. If you tried them, you WILL brick your phone. If you tried Custom Touchwiz Roms based on those 2 firmwares, it may or may not work.
Now if you are trying to flash a AOSP Rom, either 4.3 or Kitkat 4.4, and you do have latest TWRP, (2.6.3.1), please specify the error message in detail.
You must do Factory Reset and Wipe Dalvik + Cache in the Recovery before flashing the AOSP Roms.

Im still here having problems booting 4.4.2

In all my previous posts requesting help of why my phone wont boot 4.4.2 ive never gotten a clear answer or any troubleshooting steps.
when i flash 4.4.2 with any recovery it goes to rom logo and doesnt boot past that. the only rom ive been successful with flashing is omni rom. whats the difrence between omni rom and any other regular 4.4.2 rom/
all i want to do is use carbon kk i had 4.4.2 working once before i flashed 4.3 and the wifi fix and after i flashed the wifi fix my phone stopped booting into 4.4.2 ever since ive been trying to get a odin wifi fix removal for my phone. i want to see if that will fix it but no one will help
also in cwm recovery upon wiping
you get an android_secure not found or somthing like that
zachdees said:
In all my previous posts requesting help of why my phone wont boot 4.4.2 ive never gotten a clear answer or any troubleshooting steps.
when i flash 4.4.2 with any recovery it goes to rom logo and doesnt boot past that. the only rom ive been successful with flashing is omni rom. whats the difrence between omni rom and any other regular 4.4.2 rom/
all i want to do is use carbon kk i had 4.4.2 working once before i flashed 4.3 and the wifi fix and after i flashed the wifi fix my phone stopped booting into 4.4.2 ever since ive been trying to get a odin wifi fix removal for my phone. i want to see if that will fix it but no one will help
also in cwm recovery upon wiping
you get an android_secure not found or somthing like that
Click to expand...
Click to collapse
The android secure issue you see is actually nothing. It is stating it cant find that directory on you sdext partition which you dont have unless you partition your sdcard.
Now why you cant boot 4.4 is kind of odd. I have gone between all versions for our phone aosp and touch wiz without any problems. I would suggest installing twrp and then running billards back to stock mc2 with counter reset (located in development section). Make sure you read the op for that thread and follow his directions. After flashing that before rebooting flash a root.zip (dont use twrp's root). Once your booted you can use odin or an app to flash cwm or philz (6.07.9 recommended) then you can flash any 4.4 you want. Just remember to wipe/format your internal sdcard (data/media) before going to 4.4.
Sent from my SPH-L900 using XDA Premium 4 mobile app
My phone won't let me format the internal sd card it seems like Its locked or something also I've done back to stock 5 times and no luck
Which recovery and how are you trying to format internal?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Do what jlmancuso said. This will format your internal sd as well. Just go back to stock unrooted MC2 and don't bother with flashing the root till its back up and running stock unrooted. Once you do that use the Samsung Note 2 Toolkit (version 2 not 3) and choose the ALL IN ONE Root,recovery, busy box, etc option and choose the twrp recovery not clockwork. Once you get it rooted and on twrp recovery, immediately flash Phil's recovery. 6.07 version (or whichever version that has already been recommended). Then wipe everything as usual including dalvic, cache, internal sd. Then flash stock rooted MK4 in lorjay's thread. then use ODIN on your PC to flash the wifi fix. Do a prl and update profile while on stock rooted MK4. Once you are at this point you can then flash any KK rom and it should work fine. just make sure you set your phone down and let it complete the initial boot as it sometimes takes a few minutes to boot. If this does not work then you're screwed LOL. Good luck.
tx_dbs_tx said:
Do what jlmancuso said. This will format your internal sd as well. Just go back to stock unrooted MC2 and don't bother with flashing the root till its back up and running stock unrooted. Once you do that use the Samsung Note 2 Toolkit (version 2 not 3) and choose the ALL IN ONE Root,recovery, busy box, etc option and choose the twrp recovery not clockwork. Once you get it rooted and on twrp recovery, immediately flash Phil's recovery. 6.07 version (or whichever version that has already been recommended). Then wipe everything as usual including dalvic, cache, internal sd. Then flash stock rooted MK4 in lorjay's thread. then use ODIN on your PC to flash the wifi fix. Do a prl and update profile while on stock rooted MK4. Once you are at this point you can then flash any KK rom and it should work fine. just make sure you set your phone down and let it complete the initial boot as it sometimes takes a few minutes to boot. If this does not work then you're screwed LOL. Good luck.
Click to expand...
Click to collapse
The red additional steps are unnecessary and make little sense. Otherwise, yup.
I'm of the hunch-ish opinion that it is the "wifi fix" that causes lots of these problems in the first place. Most everyone who flashes 4.4.2 builds and that has issues usually share the common thread of having that "wifi fix" on their phone....and that is a hunch, yes, purely on my part. In any case MK4 (radio, ROM, etc) is in no way needed to flash 4.4.2 builds.
I Have done every flash to stock with counter reset. and no matter how many times ive tried it still bootloops i need a DIRECT WIFI FIX REMOVAL
There is no such thing. All the wifi fix is a flash of the param.bin which is in the mk4 odin file. Also those who took the ota have it. It in no way effects aosp!
Are you flashing anything besides the 4.4 rom?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Are you also performing the data wipe and factory reset AFTER FLASHING THE ROM AND GAPPS? Many miss this required step.
Sent from my SPH-L900 using xda app-developers app
thunderwagn said:
Are you also performing the data wipe and factory reset AFTER FLASHING THE ROM AND GAPPS? Many miss this required step.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
I have never had to do that but it wont hurt to try it.
Sent from my SPH-L900 using XDA Premium 4 mobile app
i have always payed close attention to that step. im almost to the point of selling my phone for the note 3 this journey is almost over
zachdees said:
i have always payed close attention to that step. im almost to the point of selling my phone for the note 3 this journey is almost over
Click to expand...
Click to collapse
That is definitely a good idea...considering that last I knew Note 3 has yet to get working 4.4.2 builds.

[Q] WiFi not working on cm 11?

I'm running cm 10.2.1 that I installed using cwm Recovery. I had to modify the update script using root explorer before the install but after doing that the install went smoothly and I haven't had any real issues with the ROM. I had almost given up trying to update to cm 11 but decided to try the install with philz recovery which actually worked. However, after the update to cm 11 my mobile data no longer works and I am not even able to connect to WiFi. At first I thought that this may have something to do with the APN settings since I am using the boost version of the sprint phone, but the APN settings on my cm 10.2.1 are set for sprint and work fine and they don't change once I install the update. Also, I don't know for sure but I don't even think that the APN being incorrectly set would effect my ability to connect to WiFi. Somebody please give me some advice on this. Thank you.
zomvam13 said:
I'm running cm 10.2.1 that I installed using cwm Recovery. I had to modify the update script using root explorer before the install but after doing that the install went smoothly and I haven't had any real issues with the ROM. I had almost given up trying to update to cm 11 but decided to try the install with philz recovery which actually worked. However, after the update to cm 11 my mobile data no longer works and I am not even able to connect to WiFi. At first I thought that this may have something to do with the APN settings since I am using the boost version of the sprint phone, but the APN settings on my cm 10.2.1 are set for sprint and work fine and they don't change once I install the update. Also, I don't know for sure but I don't even think that the APN being incorrectly set would effect my ability to connect to WiFi. Somebody please give me some advice on this. Thank you.
Click to expand...
Click to collapse
When you installed CM11, did you do clean install?
PhilZ has a setting where you can do a wipe solely for the purpose of installing a new ROM. (Philz is my one and only recovery.)
You cannot simply flash CM11 over CM10. You need to do a clean install, so you should use a backup utility to backup all your user apps. (You'll also want to download a GAPPs package that is compatible with CM11.)
APN configurations would not affect your WiFi connectivity. DIrty flashing CM11 over CM10 might, it could also be related to a custom kernel. Make sure if you're using a custom kernel, that it is compatible with whatever Android version you're using (e.g. 4.4.4)
Hope this helps.
Higgs_Boson said:
When you installed CM11, did you do clean install?
PhilZ has a setting where you can do a wipe solely for the purpose of installing a new ROM. (Philz is my one and only recovery.)
You cannot simply flash CM11 over CM10. You need to do a clean install, so you should use a backup utility to backup all your user apps. (You'll also want to download a GAPPs package that is compatible with CM11.)
APN configurations would not affect your WiFi connectivity. DIrty flashing CM11 over CM10 might, it could also be related to a custom kernel. Make sure if you're using a custom kernel, that it is compatible with whatever Android version you're using (e.g. 4.4.4)
Hope this helps.
Click to expand...
Click to collapse
Thank you. Yeah I tried this and it did help with my mobile data, but I am still unable to connect to WiFi. Before my WiFi icon in quick setting just stayed red and now the icon is normal but when I try to connect i get an authentication error. I know I have the password right. Not sure what to do.
zomvam13 said:
Thank you. Yeah I tried this and it did help with my mobile data, but I am still unable to connect to WiFi. Before my WiFi icon in quick setting just stayed red and now the icon is normal but when I try to connect i get an authentication error. I know I have the password right. Not sure what to do.
Click to expand...
Click to collapse
What does the authentication error say?
Also, what build of CM11 are you using?
Make sure you are using the CM11 builds for d2lte:
https://download.cyanogenmod.org/?device=d2lte
Also, use the Philz recovery found here:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Please help us help you. Be specific about exactly what steps you took to flash the ROM and any errors (with details) that you encounter.
Higgs_Boson said:
What does the authentication error say?
Also, what build of CM11 are you using?
Make sure you are using the CM11 builds for d2lte:
Also, use the Philz recovery found here:
Please help us help you. Be specific about exactly what steps you took to flash the ROM and any errors (with details) that you encounter.
Click to expand...
Click to collapse
In the WiFi menu I choose my network and then enter the password and first It tells me "authenticating" which is normal, but then instead of connecting it just says authentication problem. That's all it says. I have tried turning WiFi off then back on, rechecked the password, reboot the phone and everything else I can think of.
This was the same for the 08/13/14 and the 08/14/14 nightly builds for the d2lte which I downloaded from the cm updater in settings>about phone>CyanogenMod updates. I used the app root explorer to extract the zip and then went in to the update script and modified it so that I would not get a status 7 error. Then I zipped the files back up like they were only now with the modified update script, and booted into recovery. I am using philz touch 6.48.4 for the d2lte which I flashed with mobile Odin pro. I chose the clean for new ROM option and then installed the ROM and then flashed the gapps-kk-20140105-signed.zip. then I rebooted the phone and began the set up process. It seems that everything works fine other than that I am unable to connect to WiFi.
I also tried the same process, except after cleaning to install a new ROM I also wiped the dalvik cache. This had no effect.
zomvam13 said:
In the WiFi menu I choose my network and then enter the password and first It tells me "authenticating" which is normal, but then instead of connecting it just says authentication problem. That's all it says. I have tried turning WiFi off then back on, rechecked the password, reboot the phone and everything else I can think of.
This was the same for the 08/13/14 and the 08/14/14 nightly builds for the d2lte which I downloaded from the cm updater in settings>about phone>CyanogenMod updates. I used the app root explorer to extract the zip and then went in to the update script and modified it so that I would not get a status 7 error. Then I zipped the files back up like they were only now with the modified update script, and booted into recovery. I am using philz touch 6.48.4 for the d2lte which I flashed with mobile Odin pro. I chose the clean for new ROM option and then installed the ROM and then flashed the gapps-kk-20140105-signed.zip. then I rebooted the phone and began the set up process. It seems that everything works fine other than that I am unable to connect to WiFi.
I also tried the same process, except after cleaning to install a new ROM I also wiped the dalvik cache. This had no effect.
Click to expand...
Click to collapse
First and foremost, those nightlies you tested are Android 4.4.4. Here is a 4.4.4 GAPPs package: https://www.androidfilehost.com/?fid=23610159112653416
Why are you tweaking the updater script? This should not be necessary. I flash ROMs just fine with PhilZ. Also, you do not need to flash recoveries via ODIN. You can download the .zip (not .md5) file and flash it in recovery. The recovery will flash the recovery over the recovery.
When you reflash the ROM and you have a fresh clean slate on the phone, unplug the router for 30 seconds to power cycle the router, and plug back in. The router may be having an issue with the MAC Address to your network card in your phone.
You can show the password in the WiFi interface to ensure that you are typing the correct password. If you suspect that you are getting the password wrong, you can go into your router's settings and change the password. (e.g. http://192.168.0.1 --> Change the security settings).
Give it another shot. Do not edit the updater script. I've never had a status 7 error. If needed, reflash the recovery as a zip file in recovery.
I hope this helps.
Higgs_Boson said:
First and foremost, those nightlies you tested are Android 4.4.4. Here is a 4.4.4 GAPPs package: https://www.androidfilehost.com/?fid=23610159112653416
Why are you tweaking the updater script? This should not be necessary. I flash ROMs just fine with PhilZ. Also, you do not need to flash recoveries via ODIN. You can download the .zip (not .md5) file and flash it in recovery. The recovery will flash the recovery over the recovery.
When you reflash the ROM and you have a fresh clean slate on the phone, unplug the router for 30 seconds to power cycle the router, and plug back in. The router may be having an issue with the MAC Address to your network card in your phone.
You can show the password in the WiFi interface to ensure that you are typing the correct password. If you suspect that you are getting the password wrong, you can go into your router's settings and change the password. (e.g. http://192.168.0.1 --> Change the security settings).
Give it another shot. Do not edit the updater script. I've never had a status 7 error. If needed, reflash the recovery as a zip file in recovery.
I hope this helps.
Click to expand...
Click to collapse
So.... Even after my certainty that I had the WiFi password right, it turns out that I was leaving out one letter. Wow!
Although I am still having a little issue with my mobile data. For some reason when I turn off my WiFi my mobile data goes off too. Sometimes it comes back on and sometimes it doesn't. Thanks a lit for the help.
zomvam13 said:
So.... Even after my certainty that I had the WiFi password right, it turns out that I was leaving out one letter. Wow!
Although I am still having a little issue with my mobile data. For some reason when I turn off my WiFi my mobile data goes off too. Sometimes it comes back on and sometimes it doesn't. Thanks a lit for the help.
Click to expand...
Click to collapse
Are you sure your mobile data is, in fact, switching off? There could just be some latency between the WiFi switching off and mobile data coming on.
You might try clean flashing the ROM again, or clean flashing a newer nightly altogether.

HELP! Accidentally formatted firmware in recovery

My wifi & mobile networks are not working and some options in settings force close after clicking on them. I was flashing a new rom (cm11 4.4.4) on my Redmi 1s through cwm recovery and I accidentally formatted firmware and I think that's what caused this problem. Rest of the rom works fine, but practically without network and wifi a phone is useless. :crying:
What should I do now?
Would flashing a new firmware solve this problem?
I found this procedure on google, someone please help me and tell me if it works or suggest any other method.
thebroodle.com/xiaomi/redmi-1s/stock-firmware-xiaomi-redmi-1s-miui-v5-stock-rom/
[email protected] said:
My wifi & mobile networks are not working and some options in settings force close after clicking on them. I was flashing a new rom (cm11 4.4.4) on my Redmi 1s through cwm recovery and I accidentally formatted firmware and I think that's what caused this problem. Rest of the rom works fine, but practically without network and wifi a phone is useless. :crying:
What should I do now?
Would flashing a new firmware solve this problem?
I found this procedure on google, someone please help me and tell me if it works or suggest any other method.
thebroodle.com/xiaomi/redmi-1s/stock-firmware-xiaomi-redmi-1s-miui-v5-stock-rom/
Click to expand...
Click to collapse
Try to reflash that cm11 Rom or any other rom.if the problem still persists flash the stock MIUI firmware from PC
[email protected] said:
My wifi & mobile networks are not working and some options in settings force close after clicking on them. I was flashing a new rom (cm11 4.4.4) on my Redmi 1s through cwm recovery and I accidentally formatted firmware and I think that's what caused this problem. Rest of the rom works fine, but practically without network and wifi a phone is useless. :crying:
What should I do now?
Would flashing a new firmware solve this problem?
I found this procedure on google, someone please help me and tell me if it works or suggest any other method.
thebroodle.com/xiaomi/redmi-1s/stock-firmware-xiaomi-redmi-1s-miui-v5-stock-rom/
Click to expand...
Click to collapse
Try re-flashing the official MIUI ROM using fastboot method (be warned that data and other stuff may be deleted in your internal storage when flashing using fastboot) then flash any custom ROM you want. See if that solves the problem.
Try to flash the stock rom via fastboot.
Sent from my HM 1SW using XDA Free mobile app

Samsung Galaxy Note 4 Inaccurate Touchscreen, Can't Flash ROMs

touch screen bugging out
Ok so my phone for some reason can't click on the exact location i seem to want to press
idk i was trying to flash the silly roms you guys have around here. for stock galaxy note 4 spr
i've been flashing for a while
and it seems none of them work anymore
i use the latest TWRP even used the other one CWM or something like that
i used odin even up to .10 from 1.85 even lower and still can't
even when i install (seems to be the only rom i can cm12)
the locations i press on my screen are buged out. so i have to press higher than i should to even get a click and its hard to text or anything.
i did factory resets, cashe wipes. deleted partitions.. what am i doing wrong ??
why can't this annoying this go away what am i missing guys ???
and why is it only 1 rom can flash on my phone ?? and i can't go back to any lollipop or anything ??
(i also tried flashing a superSU from the tWRP .. when i used CM 12 and it all successed but still
i have this thing where i can't click anywhere im on my phone directly i have to try and feel it out.. please help
1)what software version are you on now?
2)what rom are you trying to flash?
Note4 Rocking a Hybrid Rom
Not long ago, it was discovered flashing the wrong recovery will mess up the lock-screen.
Some were solved with KIES firmware restore; no root, straight to dialer type *#2663# and then TSP FW update. If KIES won't update it, power down, pull battery 30 seconds, Odin stock tar and boot then the dialer code and update.
Do that after you determine which stock tar or KIES update is recommended from Your response above.
Sent from my SM-N910P using Tapatalk
schlepprock said:
1)what software version are you on now?
2)what rom are you trying to flash?
Note4 Rocking a Hybrid Rom
Click to expand...
Click to collapse
I am using
Cyanogenmod version
12.1-20150814-nightly-trltespr 5.1.1
kernel 3.10.40-gef59855
baseversion
N910PVPU4COG5
GALAXY NOTE 4 SPRINT
How ever im trying to flash back to stock evrything.
so that i can flash a rom that uses stock fetures of note 4 (windows mode etc)
the cm 12 does not utilize these and i need those badly.
so i tried to go back even factory reset wipe all cashes
but some reasn during all those fails my system UI says fail. and my touchscreen is not in sync correctly.
i heard of wiping system cache not sure if i done that but with TWRP i wipe everything but SD
it seems this has been a common issue the word we are looking for is calibration issues
it seems it happens to this person exactly how it is happening to me
there was a solution at the bottom but those buttons do not work for galaxy note 4 spr
does anyone know the codes for doing so ?
source:
http://forum.xda-developers.com/note-4-tmobile/help/touch-screen-issues-root-t2986883
Did you see post 3?
I suspect you need to flash OG5 first. Use KIES or Odin. I would suggest wiping all but ExtSdCard and factory reset or format data partition, then power off; pull battery 30 seconds prior to stock tar or KIES recovery.
There's a guide you can follow as well as the OP in this post/thread. But see the steps on post 3, this thread. Boot into stock right after stock flash to try to recover your touch screen. If your touch screen is OK, then follow the guide below to root stock.
http://forum.xda-developers.com/showthread.php?p=62241991
Sent from my SM-N910P using Tapatalk
NatsarYAhu said:
I am using
Cyanogenmod version
12.1-20150814-nightly-trltespr 5.1.1
kernel 3.10.40-gef59855
baseversion
N910PVPU4COG5
GALAXY NOTE 4 SPRINT
How ever im trying to flash back to stock evrything.
so that i can flash a rom that uses stock fetures of note 4 (windows mode etc)
the cm 12 does not utilize these and i need those badly.
so i tried to go back even factory reset wipe all cashes
but some reasn during all those fails my system UI says fail. and my touchscreen is not in sync correctly.
i heard of wiping system cache not sure if i done that but with TWRP i wipe everything but SD
Click to expand...
Click to collapse
I recommend you flash this rom. Mostly stock but very stable,and the developer is working on some goodies.
http://forum.xda-developers.com/showthread.php?p=62336588
I recommend that you back up everything you want to keep because you need to wipe everything EXCEPT external SD card. Wipe cache, dalvik , system, and data three times. Then factory reset three times and then flash this rom.
Note4 Rocking a Hybrid Rom
samep said:
Did you see post 3?
I suspect you need to flash OG5 first. Use KIES or Odin. I would suggest wiping all but ExtSdCard and factory reset or format data partition, then power off; pull battery 30 seconds prior to stock tar or KIES recovery.
There's a guide you can follow as well as the OP in this post/thread. But see the steps on post 3, this thread. Boot into stock right after stock flash to try to recover your touch screen. If your touch screen is OK, then follow the guide below to root stock.
http://forum.xda-developers.com/showthread.php?p=62241991
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Ok so this stock actually went through will get with you shortly to let you know if sync is fixed,
edit: still not synced correctly but phone does finally work how i want just the main problem is bugged trying the link with *#2663# now
Edit: IT WORKED !!! big UPS BRO thank you !!!
i have same problem after install twrp and flash custom firmware phone working fine but touch won't work
i tried that *#2663# but not working on custom rom any solution to solve touch problem on custom firmware
thanks
imeicodes said:
i have same problem after install twrp and flash custom firmware phone working fine but touch won't work
i tried that *#2663# but not working on custom rom any solution to solve touch problem on custom firmware
thanks
Click to expand...
Click to collapse
Odin stock tar and try again.
There's also an update to CFAR (Chainfire auto root) for Note 4. After you fix your touchscreen, root with it and make a TWRP backup once that is installed. A TWRP restore plus full un-root in SuperSU may make OTA possible; CFAR backs up stock recovery.
You can use Flashify to install custom recovery. You may have installed the wrong recovery to have the touch screen out of cal like it is.
Sent from my SM-N910P using Tapatalk

Categories

Resources