Hey there.
I have a problem with my HTC One M8. First of all, I have slightly damaged the screen in the upper right corner and it has a black spot, like 3-4 weeks ago. Because of the fact I am on my vacations and I am 24/7 on move, I don't have time to fix it and it's not that much of a problem as the phone was 100% functional with that issue - the screen reacts to touch in that black spot. But let's get straight to the real issue. Yesterday, before going bed, my phone had 20% battery. I am used to fall asleep watching some vids/other stuff @ Youtube and so it was @ yesterday's night. When I woke up, my battery was dead so naturally I plugged the adapter to charge it. What struck me was the fact that the screen didn't react to charging. I tried switching to other adapters but no result. I tried to turn on the phone anyway - if the screen is messed up, the phone should turn on anyway and greet me with some sound - it did not. I borrowed my friends laptop and connected the phone to it in order to find out what's going on. The moment I plugged it in and it installed some usb drivers, the laptop didnt display 2 disks (the phone itself + the sd card) but plenty of disks (D-Z) which the laptop wanted to format immediately (havent done that - last resort move). I have installed the HTC Sync Manager but it doesnt find the phone. It may be due to the screen damage, however, I strongly doubt that and I think it's some software issue. Has anybody had such a problem? What should I do? What kinds of software shall I download to try to tackle this issue?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks in advance for any answer.
My android version is 4.4.4.
Soft version 3.28.401.9
HTC SDK API 6.25
Compilation 3.2.8.401.9 CL389833
Not branded
Let the phone charge for several hours, then hold Power+Vol up for a minute or more , and see if there is any change.
Related
So about two weeks ago, I switched to iPhone because I'm giving my S3 to my dad. I haven't used it since then so I fully expected the battery to die. However, when I went to charge it today the LED at the top left isn't lighting on and I get this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
Whenever I try to plug in the battery while it's connected with the USB, the red LED pops up for 3 seconds and then it goes away.
Any ideas guys? Please help me.
You could have either bumped this other thread, or at least read it over, if you had searched first
http://forum.xda-developers.com/showthread.php?t=2142459
Only like 7 down, too.
Sent from my PG06100
CNexus said:
You could have either bumped this other thread, or at least read it over, if you had searched first
http://forum.xda-developers.com/showthread.php?t=2142459
Only like 7 down, too.
Sent from my PG06100
Click to expand...
Click to collapse
I did see it. But we don't have the same problem.
My phone won't even get to the boot sequence and I know it's not a brick of any kind because the phone was working fine before I switched the iP5. I left the phone in the glove compartment of my car for a week or so, is it possible that could have messed with it? The phone was inside of the box and everything so I can't imagine it got too hot.
Well did you try the suggestions there? Keeping the battery out for a while and then putting it in and trying to boot?
Sent from my PG06100
CNexus said:
Well did you try the suggestions there? Keeping the battery out for a while and then putting it in and trying to boot?
Sent from my PG06100
Click to expand...
Click to collapse
Yeah I did but still no dice.
couple of things
Try a different battery
Try a different charger
Sometimes extreme heat and cold (from a glove compartment) can ruin a battery or the phone itself. Extreme temps are hell on phones. It's probably a good idea to remove the batterty and keep it inside if phone is being stored. Also, some chargers to go bad...had it happen. Anyway, you might have tried these things already. Good luck!:good:
Hi there brought this second hand Nexus from well known auction site. Fully aware of it being faulty, after finally switching on (power ribbon cable was loose) the screen switched on usual google popped up but once fully loaded it becomes fragmented. There are tears on the screen as I touch it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I went into bootloader where the screen loaded up as normal
As you can see there is no glitches with the screen loading this up. I then proceeded to do a stock flash from 5.1.1 to 5.0.0 to see if its just a corrupted rom. No luck still the same.
Has anyone come accross this problem and know what is the fix? Before I tear this nexus apart for spares for my other nexus or even plug the screen to test on another ?
Any suggestions would be appreciated
kidd78 said:
Hi there brought this second hand Nexus from well known auction site. Fully aware of it being faulty, after finally switching on (power ribbon cable was loose) the screen switched on usual google popped up but once fully loaded it becomes fragmented. There are tears on the screen as I touch it.
I went into bootloader where the screen loaded up as normal
As you can see there is no glitches with the screen loading this up. I then proceeded to do a stock flash from 5.1.1 to 5.0.0 to see if its just a corrupted rom. No luck still the same.
Has anyone come accross this problem and know what is the fix? Before I tear this nexus apart for spares for my other nexus or even plug the screen to test on another ?
Any suggestions would be appreciated
Click to expand...
Click to collapse
When you flashed the factory image, did you flash all of it including kernel? I would try to get into TWRP and install a ROM to see if the problem persists. (You can boot into TWRP without installing it if you want to keep it stock recovery)
Sent from my SPH-L720 using Tapatalk
I got the OTA update for my Galaxy Tab S 10.5 to Android 6.0.1. Ever since installing it I've been having USB issues from not charging and not being detected in Windows 10. Whenever I plug an USB cable it shows the battery icon with a red X, no matter what cable or charger I use. It also does this in Windows. I installed the Samsung drivers and neither Odin or Kies can detect it. Device Manger doesn't show any unknown device or the tablet. The only way I can charge it now is to turn it off and leave it overnight. This gets maybe 6-8% charge. I've also tried factory reset, but same issue. Is this tablet pretty much done for now?
In the Developer Options menu, tick 'USB Debugging'
If you have not been able to charge to 100% even though you have tried a number of cables and chargers then it looks like you battery has gone bad.
A battery can just die just by going to low, it might have been weak and this was the straw that broke it`s back, I found my T800 battery dead the other week it would not turn on, a bad app had drained it overnight, luckily i charged to 100% and it seems to be fine.
You can get replacement battery`s on eBay for like $10 and tool kits for like $4 and there are lots of youtube video`s on how to replace the battery it looks easy.
I already have my replacement battery and tool kit ready for when my battery goes bad as they all do eventually and i love my 10.5" too much for a dead battery to stop me using it for long.
Here`s my Kit, I have posted this photo a few times.
https://www.youtube.com/watch?v=s46NaOnx3iM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
John.
Have you tried a completely different computer? I have had issues frequently in the past with this device but a different computer always recognized it.
On another note, that red X is normal.
http://www.samsung.com/ca/support/skp/faq/1064881
I tried the methods above minus opening it. I left it plugged into my PC for half a week and came back to it. Randomly decided to start working as if none of this ever happened. When I turned it back on it was still stuck at 34%, but it now showed a charging icon instead of a red X. I've been using it on all different chargers so far and no issues.
CAUSE I AM A NEW USER, COULDN'T POST THE IMAGE IN HERE, SO SEE MY REPLY AT https://forum.xda-developers.com/showpost.php?p=73388497&postcount=2
What i think could have caused this is the charging at home, cause devices connected to certain outlets in my house sometimes have a lot of static electricity in them (voltage fluctuation maybe?) e.g. sometimes the digitizer became unresponsive when connected to the charger + The metallic back filled with static to the point you can't hold the bare phone in the hand anymore, but some other times it was completely fine
PS. The phone has been dropped only once, and that was back in December
All the rest of the digitizer works absolutely fine, and I wouldn't really say it's completely unresponsive, it does respond to my touches but as can be seen in the pic, whenever i touch that rectangular part, it instead registers two touches above and below that region, instead of in that rectangular region.
This initially started happening like a month ago, shortly after i installed OB19, thought it was some software bug, updating to OB20 and then 21 didn't help, i did dirty flashed 4.1.6 and i think it worked for a short while on it(don't really recall correctly now cause i immediately went back to OB because systems app didn't worl cuase of dirty flash)
And after that, things that i have tried and didn't work:
Revert to 4.1.3(Clean Flash)
Revert to 4.1.0(Clean Flash)
Install LOS with firmware from OB19(Clean Flash)
Completely draining the phone twice
What i haven't tried:
Install some older LOS build with old firmware that I know didn't have this problem(e.g 4.1.0)
Currently on 4.1.6 after clean flashing; and the issue also occurs in TWRP too, so i guess it's RIP for the digitizer? Or is this fixable, couldn't find much info about it on XDA/reddit/random forums, not really a common issue i think, did find some threads though but those were from 2011-2013 mostly
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The exact same thing happened to me last year. I ended up sending it in to get it repaired under their insurance :/ I tried everything to get it fixed and absolutely nothing worked
I had my phone plugged into the charger and when I turned it on I got this screen. When I reboot, I don't see the boot up screen logo , it just takes me to this screen and I see this big block of white. Any idea what the issue may be?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KhyronZA said:
I had my phone plugged into the charger and when I turned it on I got this screen. When I reboot, I don't see the boot up screen logo , it just takes me to this screen and I see this big block of white. Any idea what the issue may be?View attachment 5834265
Click to expand...
Click to collapse
Try forcing a reboot by holding voldown+power. Let me know if it doesn't work.
ethical_haquer said:
Try forcing a reboot by holding voldown+power. Let me know if it doesn't work.
Click to expand...
Click to collapse
Unfortunately its the first thing I did. It doesn't boot with the samesung log, instead with a white screen as above but I see some of the text behind it (like asking for pin number etc)
Will it go into the boot menu?
nope
That really sucks... sorry to hear this. Happens on the S series phones apparently too.
A loose display ribbon connector... maybe.
Looks like a blown display.
Did it recieve any hard impacts?
Always use a good case like the Zizo Bolt.
If so and it was me I would replace the display or order a new N10+ N975U1, they are still available. Almost all of these are loaded with Q.
Personally I refuse to run Android 11 or higher.
If you don't object to Android 11 you can find them used for about the price to replace the display.
Samsung simply doesn't have any other flagship phone that I would buy over the N10+ including the S23U. I have a known good US vendor that sells new ones for $650 which is about twice that of a used one. Bought one from them about 14 months ago. Pristine in the factory sealed box. He buys up unsold lots. The last manufacturer ones were factory loaded with Q.