Hello everyone...
i have a Tab3 10.1 3G version (P5200) and i have been using it for a long time using custom roms and rooting..etc
the last month after the CM13 rom had some issues i have wiped the data and cache and the system then tried to reflash the rom but it got stuck in bootloop... after trying many times still the same, then tried to flash the stock firmware and it does the same " rebooting... showing the SAMSUNG logo then turning off then turning on"
I have tried different Stock firmwares and almost every rom for the device and it still not getting into system, all I can get into it is the download and recovery mode... i have even searched for bootloaders and i couldnt find it for my device...
don't know what to do, if anyone could help me i'd be thankful for him/her...
overall Thanks for stopping by and reading this thread.
Related
Hello Guys,
Need your help.
I have flashed hundreds of roms on my android phones and tablets, but this time something new happened to me:
After installing a t700 Rom using twrp recovery, my tablet got stuck at boot logo, doesn't matter how many resets i try, it never goes beyond the black and whit samsung boot logo!
I have tried to reset using kies, flashed a stock firmware with Odin, etc ect ect, nothing! its still stuck at boot logo.
One curious thing happened, after flashing sock firmwares for the second or third time, the Samsung sounds stops halfway, and then it goes back to the Samsung logo.
Any ideas on how to get out of this nightmare?
Thank you!!
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Samsung Galaxy Tab S
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy Tab S Q&A, Help & Troubleshooting
Good luck!
black_coder said:
Hello Guys,
Need your help.
I have flashed hundreds of roms on my android phones and tablets, but this time something new happened to me:
After installing a t700 Rom using twrp recovery, my tablet got stuck at boot logo, doesn't matter how many resets i try, it never goes beyond the black and whit samsung boot logo!
I have tried to reset using kies, flashed a stock firmware with Odin, etc ect ect, nothing! its still stuck at boot logo.
One curious thing happened, after flashing sock firmwares for the second or third time, the Samsung sounds stops halfway, and then it goes back to the Samsung logo.
Any ideas on how to get out of this nightmare?
Thank you!!
Click to expand...
Click to collapse
1. Load up your PC the original stock firmware, which corresponds to your Tab original Region CSC-code according to the model number and serial number of your Tab. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
2. Flash your Tab by Odin c original stock firmware from p.1
Regards
I have seen this before when a tablet gets stuck on the Samsung logo, what you need to do is after flashing your stock firmware using odin, you then need to get into stock recovery and wipe cache and factory reset from within stock recovery and then reboot.
Hello ppl.
I have the G3 D855, and while i was "playing" with the roms before, i reinstalled blisspop rom but my phone stuck on loading screen.. After this i DLed and flashed CM 12.1 but same again.. 3rd rom i flashed was cloudyg3 rom but again phone is stuck on loading screen..
I am wondering is this because battery is low? because even if i have it plugged in it is not loading....
Can you give me an advice please?
Thanks in advance
if twrp is still working, try flashing a stock rom (and kernel?). if it's not, a last resort could be using LG flash tool to clean wipe. you'll also lose all your data
Well.. i charged it for about 4 hours untill it goes ~30% (Dont know why it took so much time), and then i wiped it and reflashed the blisspop rom.
It worked so i guess the fact that i was trying to flash roms and boot them while it was on low battery was the problem.
Thank you again
Hi all !
So two days ago i wanted to update my Sm-t310 to 4.4.2 from the tab itsself, but it wasn't possible, because i had rooted it before. So i tried to remove my root and then something happened and my tab got stuck in firmware upgrade encountered an issue. please select recovery mode in kies & try again charging battery screen.. i looked for solutions with both kies and odin, but they get stuck at 7% while flashing????? Nothing seems to work, i tried it even through the philz recovery mode after wiping cache and deleting cache partition, but it only gets stuck at the boot loop and then when i try to flash it with odin it gets stuck on system.img at about 7%... I really don't know what to do :crying: Please help me, I am desperate !
Hi,
This thread is being moved to your own dedicated forum, where the experts may be able to help you better.
Good luck!
benzomarie said:
Hi all !
So two days ago i wanted to update my Sm-t310 to 4.4.2 from the tab itsself, but it wasn't possible, because i had rooted it before. So i tried to remove my root and then something happened and my tab got stuck in firmware upgrade encountered an issue. please select recovery mode in kies & try again charging battery screen.. i looked for solutions with both kies and odin, but they get stuck at 7% while flashing????? Nothing seems to work, i tried it even through the philz recovery mode after wiping cache and deleting cache partition, but it only gets stuck at the boot loop and then when i try to flash it with odin it gets stuck on system.img at about 7%... I really don't know what to do :crying: Please help me, I am desperate !
Click to expand...
Click to collapse
Since you mentioned that you still have your Philz custom recovery, have you tried flashing a rom. It may or may not work, but it is worth a shot.
I normally find a way around some android issues but sort of lost this time so iI need some help please!
Tablet is (was?) rooted and running cm12 plus twarp before the issue. It was running fine other than using a lot of battery.
So after replacing a battery my Note 8 N5110 started a boot loop and sometimes TWARP starts but does not work and it gets back to the boot loop!
I tried first re-load TWARP via odin and it passed but it was still in the bootloop so I tried load the stock firmware via Odin and I am getting failed with a
I have attached a picture of Twarp right before it fails, a picture of Odin with a failed attempt to load the stock firmware and the message I get on the Note 8 custom firmware screen.
Thanks in advance!!!
For the record I found a way out, the only thing that worked on my case was initialize the Tab using Samsung KIES.
Awesome software thanks Samsung, it saved my day and now....back to root and CM13 again
Hello glad you got it working. is it hard to replace the battery in these?
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Sarvesh1 said:
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Click to expand...
Click to collapse
Can anyone please help.
same thing happened to me but no solution
bunny374 said:
same thing happened to me but no solution
Click to expand...
Click to collapse
Now I suspect it is a hardware problem.Probably motherboard has failed.
Same problem here. SP Flash tool flashing successfully but phone won't even boot up
Sarvesh1 said:
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Click to expand...
Click to collapse
Must be problem with your charger use frog charger that worked for me after using different usb cables it happens..