Develop Bugs

ADB

For some reason I can't get my note 2 to show up on ADB. I have sdk/platform-tools installed from google and tried with the google usb driver installed and uninstalled. I do have the Samsung drivers installed that I needed to root the device and that went very well using Odin. If anyone can give me ideas. Yes, Settings -> Developer options -> checked "ON" and then checked USB debugging is enabled.
I have been successful in getting all my Evos to show up in the past without too much effort so I feel really dumb asking.

bhint15 said:
For some reason I can't get my note 2 to show up on ADB. I have sdk/platform-tools installed from google and tried with the google usb driver installed and uninstalled. I do have the Samsung drivers installed that I needed to root the device and that went very well using Odin. If anyone can give me ideas. Yes, Settings -> Developer options -> checked "ON" and then checked USB debugging is enabled.
I have been successful in getting all my Evos to show up in the past without too much effort so I feel really dumb asking.
Click to expand...
Click to collapse
Gotta install the Samsung Drivers. Use the toolkit to install if you don't wanna search for the file.
Sent from my SPH-L900 using Tapatalk 2

Thanks viper. I had Samsung drivers installed but guess wrong ones. Hard coming from htc and learning all this new Samsung stuff. Not regretting it though!
Sent from my SPH-L900 using xda app-developers app

7.3.0 Driver issues...

I received the OTA update to 7.3.0, and it destroyed everything.
I did a factory reset, and tried to root with the same process I used before the update.
RootQemu tells me
"You must install your device speciffic drivers so that the device is visble to ADB"
In my pc's device manager, under "Kindle", it says "Android composite ADB interface"
I have deleted, downloaded and installed about a dozen different drivers, and have seen the "correct" Android composite adb interface in the device manager with about a third of them, however, no matter what,
RootQemu tells me:
"You must install your device specific drivers so that the device is visible to ADB'........
WHY?????????????????

Are you sure you still have adb turned on in settings....
I'm guessing you're making a mountain out of a mole hill and just neglected to re check that step
Sent from my GT-P3110 using xda app-developers app

mrkhigh said:
Are you sure you still have adb turned on in settings....
I'm guessing you're making a mountain out of a mole hill and just neglected to re check that step
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Yeah, ADB is on. I wish it was that simple.
Actually, it probably is something that simple.
Just can't figure it out.

Ed the Lame said:
Yeah, ADB is on. I wish it was that simple.
Actually, it probably is something that simple.
Just can't figure it out.
Click to expand...
Click to collapse
Have you tried using ADB to do anything else, such as pushing a file to the sdcard?

[ROM] Pure LG Experience

Disclaimer:
Always make a backup first!! Flash at your own risk!
We are NOT responsible for anything that may happen to your phone.
We cannot be held responsible for smoke, fire, water, or other natural disasters.
Pure LG Experience​
What You Get
~ Based on Lollipop 13B firmware
~ Setenforce Permissive
~ Rooted Thanks goes to Chainfire SuperUser
~ Fully Debloated Verizon apps
~ Theme engine + Fonts supported
~ MyPlaces Supported
~ Google Cloud Drive activator supported
~ Smart Settings Supported
~ Backup & Restore Supported
~ User Mode Supported
~ Command Center Supported ( Widget )
~ Debugging changed to show more output in logcat ( Features the same dubug output as userdebug mode )
~ Insecure adbd on boot complete ( You still have to confirm your usb RSA though ) thanks to chainfire for the ideal
~ busybox added thanks to stericson binary
~ init.d supported
~ LG Smart world added
~ Few Overlay Changes
~ adb debugging enabled by default ( boot complete )
~ Patched qseecomd binary ( Memory / IO controller )
~ Deodex see notes on page 2
~ Disabled Modified system reporting
~ If system report modified, kdz stock then dd my image over
~ Disabled OTA's
~ Added LG stock browser
Download: FlashFire Install .zip
https://drive.google.com/file/d/0B3ocVtK9s0YrSm1SUGo1Tkx0N3c/view?usp=sharing
Click to expand...
Click to collapse
Guide to Using FlashFire:
http://forum.xda-developers.com/showpost.php?p=64425346&postcount=1
Click to expand...
Click to collapse

Notes:1
To enable HD calling, download myverizon app, activate hd calling then leave cache & /data/data but delete the app out of the data/app. feature stays enabled.
Click to expand...
Click to collapse
Notes:2
I issue the command after pushing files modded / permissions reset, give you an idea if it will work. if not you still have root via command prompt to fix your mistakes. Once fixed the system will boot fine. I find helpful, lot less of kdz restores I do.
setprop ctl.restart zygote
Click to expand...
Click to collapse
Notes:3 Using flashfire on my device
http://forum.xda-developers.com/showpost.php?p=64425346&postcount=1
Click to expand...
Click to collapse
Notes:4 Triggers LG Security
/# Non Booting deodex /system/app apks if modified
#
/system/app/LGATCMDService
/system/app/LGVZWStartupwizard
#
/# Non Booting deodex /system/priv-app apks if modified
#
Click to expand...
Click to collapse
Notes 5: Disabling Modified System
Rename or delete.
/system/bin/rctd
Click to expand...
Click to collapse
Download attached rct.cfg file and replace current file and repair permissions.
/persist/rct.cfg
Click to expand...
Click to collapse
Reporting will now show Official in all spectrum
Notes 6: Multi-user Mode - Add these lines to the /system/build.prop
fw.max_users=3
fw.show_multiuserui=1
Click to expand...
Click to collapse
Notes 7: Enable Multi-Window mode /system/build.prop
persist.splitwindow.support_all=true
Click to expand...
Click to collapse
Notes 8: Enable ABD and DeBugging on first boot /system/build.prop
sys.usb.state=auto_conf,adb
persist.service.adb.enable=1
persist.service.debuggable=1
Click to expand...
Click to collapse
Notes 8: Custom script apk_delete.sh - Location -> /system/vendor/bin/apk_delete.sh.
This file does not exist in our builds, but is enabled via boot.img init.rc's, You can place anything you want here. Does not run on first boot and each modification to the file will require 2 reboots, after which you shutdown / startup like normal scripts.
To Enable apk_delete.sh add this line to /system/build.prop then add your custom script to Location -> /system/vendor/bin/apk_delete.sh
persist.data.sbp.update=1
Click to expand...
Click to collapse

Thank You Eugene for this initiative
Sent from my VS986 using Tapatalk

Rooted?
Enviado desde mi VS986 mediante Tapatalk

CyberManiaK said:
Rooted?
Enviado desde mi VS986 mediante Tapatalk
Click to expand...
Click to collapse
Yes it's rooted.
*EDIT*
12/21/15
I should have the flashfire img put together today with instruction on how to flash it.

OP Updated for flashfire & guide

Has anyone tried this?
Sent from my VS986 using Tapatalk

I have. So far its great! I installed flash fire style. Everything went fine. Only thing now is in trying to get advanced calling to work again. I already had it enabled. I did what OP suggested but nothing is working. Other than that its nice to have smart settings!

hschreibz7 said:
I have. So far its great! I installed flash fire style. Everything went fine. Only thing now is in trying to get advanced calling to work again. I already had it enabled. I did what OP suggested but nothing is working. Other than that its nice to have smart settings!
Click to expand...
Click to collapse
Did you download myverizon app and then activate hd calling before deleting out of /data/app?
I'll look into this issue in the morning.

All is working fine except hd calling want activate. Downloaded my verizon app and then went to settings avanced calling to activate but get the process.com.Android.settings has stopped. I've done everything from wipe settings and apps to flashing again and nothing helps. Any suggestions?
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
eugene373 said:
Did you download myverizon app and then activate hd calling before deleting out of /data/app?
I'll look into this issue in the morning.
Click to expand...
Click to collapse
Just saw your post. Same problem here with hd calling

I'll have a look at the settings.apk does anyone have the stock LGSettings.apk with odex files. I'd have to flash back to stock at this point.
rsb321 said:
All is working fine except hd calling want activate. Downloaded my verizon app and then went to settings avanced calling to activate but get the process.com.Android.settings has stopped. I've done everything from wipe settings and apps to flashing again and nothing helps. Any suggestions?
---------- Post added at 07:43 PM ---------- Previous post was at 07:42 PM ----------
Just saw your post. Same problem here with hd calling
Click to expand...
Click to collapse

eugene373 said:
I'll have a look at the settings.apk does anyone have the stock LGSettings.apk with odex files. I'd have to flash back to stock at this point.
Click to expand...
Click to collapse
I don't but I've got the stock kdz ready to flash. I'll pull it and send to you then once we get it figured out I'll reflash your Rom .
One thing I've noticed is my hd calling says click here to turn it off although I've verified through 4g Data not working on calls and the hd notification not showing up on calls to my wife that it definatley is not working. I also know that it for sure worked on stock so it's something that's causing settings to stop. Soon as I get flashed to stock I'll upload settings.apk

See the errors now, I'll have it fix soon.

eugene373 said:
See the errors now, I'll have it fix soon.
Click to expand...
Click to collapse
Ok after 2 hours of messing with adb saying my device is offline I give up...adb worked fine but this is the first time using it with Windows 10 so I'm guessing it's got drivers messed up which is causing it to not issue a device authorization attempt which means I can't use adb right now.....
I'll patiently wait for your fix. Thank you for the help

Sometimes I have the same issue with Windows, not sure of the exact problem. But restarting Windows and phone while usb is disconnected ussally fixes the issue for no apparent reason.
rsb321 said:
Ok after 2 hours of messing with adb saying my device is offline I give up...adb worked fine but this is the first time using it with Windows 10 so I'm guessing it's got drivers messed up which is causing it to not issue a device authorization attempt which means I can't use adb right now.....
I'll patiently wait for your fix. Thank you for the help
Click to expand...
Click to collapse

I want to know after flashing this img my non Verizon CDMA carrier's 3G settings are gone, and I can't connect anymore through 3G.
It needs 3G settings reprogramming , what could caused this issue ?
Knowing that I flashed 13b KDZ on top of 10B and then flashed another 13B rooted img and nothing like that happened...
Sent from my VS986 using Tapatalk

Have the hd calling fixed, DADER can you send me a screen shot?
*Edit*
I did a factory wipe and have some of the issues at hand now, working on them to day / now... Fixing the issues.
Edit-2 adb error
I've fixed Root adbd insecure. it now waits to see if you have rsa key before running.
Edit-3
Think I found the fix for VVm not working. fixed now
edit-4
I'll try and have it uploaded by X-mas morning

eugene373 said:
Have the hd calling fixed, DADER can you send me a screen shot?
*Edit*
I did a factory wipe and have some of the issues at hand now, working on them to day / now... Fixing the issues.
Click to expand...
Click to collapse
Any chance of working VVM? Just wondering because even installing it won't connect to the service.

eugene373 said:
Have the hd calling fixed, DADER can you send me a screen shot?
Click to expand...
Click to collapse
Unfortunately I am not a Verizon user, I do use my phone on a Yemeni CDMA carrier called "Yemen Mobile" which it doesn't has any features like HD calling, only 3G network (EV-DO) [emoji3] .
Please tell me what to take a screenshot for and I will be happy to take it.
Thanks
Sent from my VS986 using Tapatalk

Working great so far. Everything works as of now , including HD calling (Note#1 in thread post#2 worked for me). Great job and thanks again!

Latest HTC lockscreen update essentially soft bricked my phone.

Hi all,
The latest update has some issues- the OS boots and I am immediately presented with a system.ui has been stopped dialogue. I'm unable to open the app drawer, open an app, open the notification drop-down. The popup appears almost immediately after dismissing. I think the Testers really missed something here.......
I'm going to have to try and locate the previous version and hope I can install it through twrp.
Has anyone else seen this happen?

typhoonikan said:
Hi all,
The latest update has some issues- the OS boots and I am immediately presented with a system.ui has been stopped dialogue. I'm unable to open the app drawer, open an app, open the notification drop-down. The popup appears almost immediately after dismissing. I think the Testers really missed something here.......
I'm going to have to try and locate the previous version and hope I can install it through twrp.
Has anyone else seen this happen?
Click to expand...
Click to collapse
Haven't had this happen to me
if you check on apkmirror you'll find the previous versions there =)

This just happened to me.... It's just flashing the HTC 10 stock background over and over and over and phone is heating up very fast. Have tried starting in safe mode, rebooted several times, no joy..... Anyone have any ideas?
---------- Post added at 09:40 AM ---------- Previous post was at 09:04 AM ----------
rdmack said:
Haven't had this happen to me
if you check on apkmirror you'll find the previous versions there =)
Click to expand...
Click to collapse
Do you encrypt your phone? I feel like the update didnt transfer encryption presets and new app is trying to unlock without decryption codes or something.

Brax33 said:
This just happened to me.... It's just flashing the HTC 10 stock background over and over and over and phone is heating up very fast. Have tried starting in safe mode, rebooted several times, no joy..... Anyone have any ideas?
---------- Post added at 09:40 AM ---------- Previous post was at 09:04 AM ----------
Do you encrypt your phone? I feel like the update didnt transfer encryption presets and new app is trying to unlock without decryption codes or something.
Click to expand...
Click to collapse
I do mate, it's stock still. I didn't have to change anything regarding that, fired up as normal and asked for my PIN to decrypt device.
Just thinking, if you can battle it go and uninstall the update via settings and apps

rdmack said:
I do mate, it's stock still. I didn't have to change anything regarding that, fired up as normal and asked for my PIN to decrypt device.
Just thinking, if you can battle it go and uninstall the update via settings and apps
Click to expand...
Click to collapse
I'm not running stock. Other people seem to be having similar issues in the Viper Rom discussion.

Brax33 said:
I'm not running stock. Other people seem to be having similar issues in the Viper Rom discussion.
Click to expand...
Click to collapse
on what rom you are? and you @typhoonikan ?
...and on what rom version you are, still marshmallow I assume.
A logcat will be really helpful.

rdmack said:
Haven't had this happen to me
if you check on apkmirror you'll find the previous versions there =)
Click to expand...
Click to collapse
I was unable to install the apks located there in the traditional way. I tried to install them through TWRP via adb push file.apk /system/app but it didn't work. I'm unaware of how to install APKs outside of the system otherwise? Regardless, downgrading, if this method is viable, didn't work. I had to completely wipe clean and start fresh.
Brax33 said:
This just happened to me.... It's just flashing the HTC 10 stock background over and over and over and phone is heating up very fast. Have tried starting in safe mode, rebooted several times, no joy..... Anyone have any ideas?
---------- Post added at 09:40 AM ---------- Previous post was at 09:04 AM ----------
Do you encrypt your phone? I feel like the update didnt transfer encryption presets and new app is trying to unlock without decryption codes or something.
Click to expand...
Click to collapse
Wipe and start over. I had to. I have work calls that I can't be absent for. Thanks HTC. My phone was out of service for ~3 hours while I figures this out and the phone got completely usable again after flash+settling.
rdmack said:
I do mate, it's stock still. I didn't have to change anything regarding that, fired up as normal and asked for my PIN to decrypt device.
Just thinking, if you can battle it go and uninstall the update via settings and apps
Click to expand...
Click to collapse
The bug doesn't allow the user to enter any screen. So doing this is not an option
j to the 4n said:
on what rom you are? and you @typhoonikan ?
...and on what rom version you are, still marshmallow I assume.
A logcat will be really helpful.
Click to expand...
Click to collapse
Viper 3.5.0. I haven't upgraded to ANdroid 7.0 for reasons.

typhoonikan said:
I was unable to install the apks located there in the traditional way. I tried to install them through TWRP via adb push file.apk /system/app but it didn't work. I'm unaware of how to install APKs outside of the system otherwise? Regardless, downgrading, if this method is viable, didn't work. I had to completely wipe clean and start fresh.
Wipe and start over. I had to. I have work calls that I can't be absent for. Thanks HTC. My phone was out of service for ~3 hours while I figures this out and the phone got completely usable again after flash+settling.
The bug doesn't allow the user to enter any screen. So doing this is not an option
Viper 3.5.0. I haven't upgraded to ANdroid 7.0 for reasons.
Click to expand...
Click to collapse
Not sure if HTC is to blame, or we...or you being still on marshmallow.
Next time please post in the viper thread, then I would have seen your post much earlier to debug your issue.

we found the issue.
run:
adb shell settings put system tweaks_hquicksettings Tweaks
..and it will be fixed. when you resetup your toggles, don't pick any of the two sync toggles.
I'll create a flashable zip to remove those soon.

typhoonikan said:
Wipe and start over. I had to. I have work calls that I can't be absent for. Thanks HTC. My phone was out of service for ~3 hours while I figures this out and the phone got completely usable again after flash+settling.
Click to expand...
Click to collapse
You should have been able to fix it without wiping by booting to recovery and dirty flashing the ROM.
EDIT: No, this actually won't work. Sorry

Flashable fix: https://www.dropbox.com/s/7pdthav90nsp6bw/HTC10_3.5.0_Lockscreen_Update_FC_Fix.zip?dl=0
more info here: http://venomroms.com/attention-mars...ystore-lockscreen-update-can-softbrick-phone/

Have this issue on an M8...
Will your fix work on my device too?
Found your solution in the m8 thread...
Thank you sir

j to the 4n said:
Flashable fix: https://www.dropbox.com/s/7pdthav90nsp6bw/HTC10_3.5.0_Lockscreen_Update_FC_Fix.zip?dl=0
more info here: http://venomroms.com/attention-mars...ystore-lockscreen-update-can-softbrick-phone/
Click to expand...
Click to collapse
Thank You! Flashing this file fixed the issue and saved me a huge headache. Now to take away the HTC Lockscreen app's
"auto update" rights since it clearly can't be trusted.

drumz0rz said:
Thank You! Flashing this file fixed the issue and saved me a huge headache. Now to take away the HTC Lockscreen app's
"auto update" rights since it clearly can't be trusted.
Click to expand...
Click to collapse
read the info on our homepage.
Not sure who is to blame, htc or we.
You can install the update, with either the fix installed or the sync toggles removed.
or you dirty flash the fullrom on top, that way the sync toggles stay working.
..what I'm wondering, why so many people are still on marshmallow...

j to the 4n said:
..what I'm wondering, why so many people are still on marshmallow...
Click to expand...
Click to collapse
There's a few xposed modules I like.
Is nougat really that big a difference? I have it on my tablet and it's very similar to marshmallow.

eoinzy said:
There's a few xposed modules I like.
Is nougat really that big a difference? I have it on my tablet and it's very similar to marshmallow.
Click to expand...
Click to collapse
guiness is also just a usual beer.

Well I like Marshmallow and Nougat. But I don't like Guinness!
If Guinness had Xposed modules then I'd drink it!

I have this problem on my m8 as well. Unfortunately I was not able to solve this problem with your post. I cannot execute the adb command since adb is telling me that my device is offline (I booted into the OS with the screen going on and off).
I also flashed the zip file, but it didn't work out either. I am not sure which version of viper I have (I assume it's the 6.0.1), so I tried different zips but no success...
Could anyone tell me what I did wrong? I really don't want to do a full reset.

obaern said:
I have this problem on my m8 as well. Unfortunately I was not able to solve this problem with your post. I cannot execute the adb command since adb is telling me that my device is offline (I booted into the OS with the screen going on and off).
I also flashed the zip file, but it didn't work out either. I am not sure which version of viper I have (I assume it's the 6.0.1), so I tried different zips but no success...
Could anyone tell me what I did wrong? I really don't want to do a full reset.
Click to expand...
Click to collapse
another way would be to go to twrp->advanced->file manager
navigate to /data/app/ and delete the com.htc.lockscreen folder do the same in /data/data
boot up, then go back to recovery and flash the fullrom on top.
if nothing helps, you can do a twrp backup, then clean flash. Now you can restore your apps and data with titanium backup.

Been looking for a solution to this ! My gf phone had the exact same issue, dirty flashed and still no good etc.
I shall try the packages J posted. Thanks so much!
Sent from my HTC One M9 using Tapatalk
---------- Post added at 10:18 PM ---------- Previous post was at 10:10 PM ----------
j to the 4n said:
Flashable fix: https://www.dropbox.com/s/7pdthav90nsp6bw/HTC10_3.5.0_Lockscreen_Update_FC_Fix.zip?dl=0
more info here: http://venomroms.com/attention-mars...ystore-lockscreen-update-can-softbrick-phone/
Click to expand...
Click to collapse
Just downloaded this. And it saves as .... File.Bin is that correct ? Thanks
Sent from my HTC One M9 using Tapatalk

[GUIDE] Unlock Factory Mode *root*

FIRST THING FIRST
EVEN IF YOUR PERSIST IS ALREADY BROKEN AND FINGERPRINT DOES NOT WORK.
BACK UP YOUR PERSIST.IMG BEFORE YOU PERFORM THIS GUIDE, IT IS SUPER EASY TO MESS UP YOUR CALIBRATIONS IN THIS MODE.
In a root explorer of your choice go to /mnt/vendor/persist/engineermode/
You'll see a file that is called 'engineermode_config' open that file with a text editor.
Code:
[SIZE="5"][B]encrypt_app=true[/B][/SIZE]
[SIZE="5"][B]encrypt_adb=true[/B][/SIZE]
rc4_key=*************************************************************************************************************************************************************************************************************************************************
imei=*******************
last_download_time=*******************
encrypt_log=true
Switch the two lines to "false"
Code:
[SIZE="5"][B]encrypt_app=false[/B][/SIZE]
[SIZE="5"][B]encrypt_adb=false[/B][/SIZE]
rc4_key=*************************************************************************************************************************************************************************************************************************************************
imei=*******************
last_download_time=*******************
encrypt_log=true
Reboot your device and enter the stock OnePlus phone app.
Enter your factory code of choice.
Main menu is *#808#

Sorry not sure to understand the purpose?

Steve0007 said:
Sorry not sure to understand the purpose?
Click to expand...
Click to collapse
You get all the factory settings for testing the phone including recalibration sensors, display, fp reader, etc.

good job crazy it lets that part of system be modified and revert back after boot

antnyhills said:
In a root explorer of your choice go to /mnt/vendor/persist/engineermode/
You'll see a file that is called 'engineermode_config' open that file with a text editor.
Switch the two lines to "false"
Reboot your device and enter the stock OnePlus phone app.
Enter your factory code of choice.
Main menu is *#808#
Click to expand...
Click to collapse
If this works great. My wife is at sleep now.i try this tomorrow

antnyhills said:
You get all the factory settings for testing the phone including recalibration sensors, display, fp reader, etc.
Click to expand...
Click to collapse
So being new to all this I got everything on my phone but don't see the f.p. sensor for I lost mine and am trying to get it working again.

pyry666 said:
If this works great. My wife is at sleep now.i try this tomorrow
Click to expand...
Click to collapse
Edit. Sure i can acces that mode but pf crashes if try that option..
Edit. And its just ocd thing anyway. Repair center is not that far away..
Edit3: so after playing some time now wuth factory mode U thank that you would still need that OnePlus specual tool to recalibrate fp reader..Am I wrong?

For FactoryMode unlock you can simple use my Magisk Module what I created on 7.5.2020
Works for every OnePlus device
https://download.android-freaks.de/dl/?dir=Miscellaneous/Magisk Modules (Android)

jamal2367 said:
For FactoryMode unlock you can simple use my Magisk Module what I created on 7.5.2020
Works for every OnePlus device
https://jamal2367.de/downloads/?dir=Miscellaneous/Magisk Modules (Android)
Click to expand...
Click to collapse
Link is down. 404 error.

Is it still working on 10.5.12 ?

TheKnux said:
Link is down. 404 error.
Click to expand...
Click to collapse
Try this, it's still the same module created by @jamal2367. I found the module in his website.

Module doesn't work. Dialing #*808# returns to the dialer.
Sent from my IN2025 using Tapatalk

FernBch said:
Module doesn't work. Dialing #*808# returns to the dialer.
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
Did you debloat your phone? Check that the EngineeringMode.apk file is present in the system /app/EngineeringMode folder. This apk is essential to make factory mode work.

dianoandr said:
Did you debloat your phone? Check that the EngineeringMode.apk file is present in the system /app/EngineeringMode folder. This apk is essential to make factory mode work.
Click to expand...
Click to collapse
The app is there. Editing the config file causes it to FC on open when dialing the code, couldn't seem to get past that so I tried the module.
Sent from my IN2025 using Tapatalk

FernBch said:
The app is there. Editing the config file causes it to FC on open when dialing the code, couldn't seem to get past that so I tried the module.
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
I have already read about a similar problem on oneplus 7 pro, on that occasion they solved it using an old version of the EngineerMode.apk, the one available on apk mirror here. The original thread I am referring to can be found here.

dianoandr said:
I have already read about a similar problem on oneplus 7 pro, on that occasion they solved it using an old version of the EngineerMode.apk, the one available on apk mirror here. The original thread I am referring to can be found here.
Click to expand...
Click to collapse
Thanks, I'll check it out. I've had the 1+8P for about 10 days so I'm still learning some of the secrets.
Sent from my IN2025 using Tapatalk

FernBch said:
Module doesn't work. Dialing #*808# returns to the dialer.
Click to expand...
Click to collapse
Should be *#808# rather than #*800#

FernBch said:
Thanks, I'll check it out. I've had the 1+8P for about 10 days so I'm still learning some of the secrets.
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
It's a pleasure, when you try let them know if it works, so it can get back to someone else

Steve0007 said:
Should be *#808# rather than #*800#
Click to expand...
Click to collapse
Oops. That's a typo.... Lol
Sent from my IN2025 using Tapatalk

*#808# is supposed to take you into "Factory Mode" aka manual test mode. I still haven't gotten past the FC issue.....
*#36446337# is for "Engineering Mode". From there you can also run factory mode but it still crashes....
Sent from my IN2025 using Tapatalk
---------- Post added at 08:02 PM ---------- Previous post was at 07:14 PM ----------
I should also add you can mess your phone up here. Proceed with extreme caution!!
Sent from my IN2025 using Tapatalk