Hi guys,
I just tested several Sound Mods for Android. So I want to share my best settings for the HTC U11 + U sonic Earphones with you.
Working on:
Stock based ROM (8.0 based)
LOS based ROM (8.1 based)
Install Viper4Android via MagiskManager (Get it from here or directly under Downloads in Magisk, I am using Viper4Android 2.6.0.4 with the new Material Design)
Reboot
Install the AINUR Audio Mod (Get it from here or install it directly through Magisk Manager -> Downloads -> Ainur Sauron.)
Reboot
Install AML(Audio Modification Library) via Magisk or flash it from here
Reboot
Open Viper4Android. Driver Status should be working now. If not dirty Flash your ROM and start again at 1.
Load my HTC U11 Profile that I attached to this post. When using Viper4Android FX greater or equal to version 1.6 than use the v2 Profile. Everything lower than Viper4Android FX 1.6 just use the v1 Profile. Unzip the attached File to the Viper4Android Folder at the Internal Storage of your Device. Dont forget to load the Profile in V4A.
Hope you are enjoing this as much as I do. If you got any recommendations or suggestions let me know.
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Zimty86 said:
for me is processing on no, have already made as described a dirty flash of my Rom
edit: I have solved the problem with the music player just pause and play again and it works
Click to expand...
Click to collapse
Great that yours also working .
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
xx00xx1990 said:
Hi, my u11 stucks on LeeDrOiD Logo after flashing dolby... Sauron and viper are working.
Click to expand...
Click to collapse
Did you already installed another soundmod? This happened to me after I flashed ARISE. Only a full wipe helped me out. I am also using Leedroid R124.
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
xx00xx1990 said:
I uninstall sauron and aml befor i try to flash all the stuff in the way you describe it. Before i have sauron only.
After i uninstall dolby in twrp the phone boots up normaly.
Click to expand...
Click to collapse
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Malle355 said:
Hmm maybe its a problem with sauron that Dolby dont work when you flash sauron before. As I said I recommend a complete wipe then it should work without any problems.
Click to expand...
Click to collapse
I saw in Leedroid thread that you have to change a line in arise_parameters1.prop , to avoid bootloops
After flashed as your instructions, everything works like a charm bur only ANC not work anymore
I finally got it to work, but sound quality is not as good as on Dolby Atmos Nougat, I think I will stick to V4A + usb dongle boost mod till dolby is updated
Will just the viper4Android work and give good sound quality
Sent from my 2PZC5 using XDA Free mobile app
Actual Dolby can't work while V4A works, at least with me, I have to disable one of them so the other work, but anyway actual dolby on oreo is not good as audio quality, it was way better on Nougat
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
schmeggy929 said:
I have yet to get Ahrion's version of Viper4Android FX to work. Even his AM3D Zirene Sound hasn't worked for the 11 since Magisk. The only one that works for me is ShadySquirrel's for Magisk v15.
Click to expand...
Click to collapse
I can use Ahrion's version, but it has to be the v1.5.2/2.5.0.5 version. I've never been able to get any 2.3.4.0 versions to work on Oreo, due to the driver not being able to install.
Anybody get Dolby to install? I'm getting Api error
Should we install Unity or standard version from the official thread?
vegetaleb said:
Should we install Unity or standard version from the official thread?
Click to expand...
Click to collapse
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
I must reckon the new Dolby port on Oreo is pretty good, I am using dynamic selection to boost both surround and bass. Always be sure to have Dolby surround mode On (green icon)
bigAL99 said:
I'm running both Unity versions on Lee's rom, have to restart Viper everytime i start playing some music but apart from that little annorance it is great
Click to expand...
Click to collapse
How did u get Dolby to run? Mine opens up and close right away. I'm on ledroids rom.
Can anyone get the profile to work on updated viper on Magisk. I can see it in my profiles but can't get it to take
Installing the magisk module for viper always gives me a bootloop
So what's the best way to get viper on android 10 roms?
I'm on havoc os
Worked fine on Pie roms for me
Darkweb_182 said:
Installing the magisk module for viper always gives me a bootloop
So what's the best way to get viper on android 10 roms?
I'm on havoc os
Worked fine on Pie roms for me
Click to expand...
Click to collapse
Ask the mod dev to port viper mod to 10.
Meanwhile look at the cross-dev forum, in a rom's thread (search yourself, I don't remember exactly which rom's thread) a workaround relating post-fs scripts is mentioned.
My memory is better then expected: https://forum.xda-developers.com/on...m-havoc-os-t3782811/post80772751#post80772751
Can we install Viper4Android in our M51 device? Please share steps if possible, I would thank in advanced.
No it doesn't work but there's a good alternative: JamesDSP. It's a magisk module so its easy to install. I've been using it for months without issues. Sound quality is on par with Viper4Android although the UI is not that streamlined.
Thank you so much for answering. I have no idea when Viper mod will be available but can only wait.
if u have root then viper working
Viper works with Magisk, installing ainur audio first resolves problem.
i am on latest a11 crdroid 7.18 but i tested this module https://github.com/reiryuki/Mi-Sound-Redmi-M2012K11AC-Magisk-Module
of course i also installed miui core module.
flashing goes well but when i reboot i find the new "sound effect" menu into sound settings BUT if i touch it does not enter. forces me back into general phone settings.
audio seems a little different but imho like stock rom, no near effect like miui atmos that was wonderful.
i really need a magisk module to flash... i wanna stick to a11 rom and not a12, i hope there is a way to flash atmos on this rom
I'm not sure if this is what you're looking for, but thought it may be worth a try for you
Working Dolby Atmos and Viper 4 Android official on Pie/Q
For those of you still looking for a port of Dolby Atmos, guitardedhero is back developing his Atmos port now for Pie and Q It's still in the testing phase, but it works for me! This is the thread...
forum.xda-developers.com
Unfortunately the reason why I'm sticking to a MIUI ROM for the timebeing :s
question currently running PixelOS rom and i'm rooted would like to instal a sound enhancer was going to do vipper but after watching Munchy 2021 video it looks like a pain in the azz ,and not sure if that method will work on android 13 unless changed since then what are my options ? Im rooted is their a simple instal module or something I can install ? just want to enhance the sound of a bluetooth speaker , I know this rom comes with miui headphone enhancer but it only works if you plug in head phones kind of a waste , any suggestions or help would be great!
Install Arrow and ZTE A2019 Pro Dolby Magisk Module
And bobs your uncle
Viper almost never worked good for me. Since A10 lol better to go for Dolby. I'm using the ZTE one too