(HELP) Bootloop OP3 - OnePlus 3 Questions & Answers

I have my OP3 rooted and bootloader open today I installed the newest version of Oxygen OS I installed the software throught TWRP but i forgot to wipe dalvik and the cache but surprise the boot back without problem but i went to install supersu from also TWRP said everything was installed ok and I restarted but now is on a bootloop I already wipe dalvik and cache several times and im not sure how to installe again stock recovery or even how I will be able to install Oxygen OS again, and i make it worse cause i used TWRP and did a full wipe and now is stuck on the 1+ logo, help please.

did u make a nandroid backup and/or did u make backups of apps with titanium backup or another app?
u may just have to do a clean flash, always make backups before doing any new install

no i didnt
Bradl79 said:
did u make a nandroid backup and/or did u make backups of apps with titanium backup or another app?
u may just have to do a clean flash, always make backups before doing any new install
Click to expand...
Click to collapse

jlrodriguez said:
no i didnt
Click to expand...
Click to collapse
oh no that was a rookie mistake, what i suggest is, clean flash unfortunately and start fresh, always always always make a nandroid backup, so did u get it working yet? or u can try to dirty flash and see if u just had a bad flash, just clear caches and install OOS full zip

Related

[HELP] Boot loop problems

First off sorry if this is answered in another post, lease kindly direct me to the post if it is =)
I just tried to install a second ROM from ROM Manager. I was running DCU and created a back-up in ClockworkMod before I started then installed the new Fresh ROM successfully. When I tried to go back to my first ROM via the restore point I set up it gets stuck in a boot loop. The 2nd restore point from the Fresh ROM loads up just fine.
Is there anyway to fix the older restore point and get back to DCU or should I just wipe everything and reinstall DCU...
Thanks in advanced!
do a data wipe, clear cache and dalvick
Then restore your backup. Clockwork does not seem to like certain roms.
Bielinsk said:
do a data wipe, clear cache and dalvick
Then restore your backup. Clockwork does not seem to like certain roms.
Click to expand...
Click to collapse
thanks, i was able to wipe everything from the original android recovery mode and upload an old nandroid back up but from Clockwork it didnt seem to clear the dalvik cache, when i clicked clear it just went back to the last menu it never said anything in the log and when i loaded up the Clockwork backup it still didnt work :/

[Q] Pretty Big Problem

So i installed a custom rom and everything went to hell so basically i tried to download the newest update for the evo 2.2 when after i put the update on the root of the phone and o the whole boot thin i install from .zip then an error comes up and i fixed that then another and over and over again...all i want now is to have the phone back to like i had it when i bought it
KR3UZL3R said:
So i installed a custom rom and everything went to hell so basically i tried to download the newest update for the evo 2.2 when after i put the update on the root of the phone and o the whole boot thin i install from .zip then an error comes up and i fixed that then another and over and over again...all i want now is to have the phone back to like i had it when i bought it
Click to expand...
Click to collapse
need more info. how did you go about trying to do this? what steps did you? More info on what you did can help someone figure out where you went wrong. Did you create a nandroid backup before you flashed the ROM? what recovery are you using? Did you wipe data (factory reset), cache, and davlik cache prior to flashing the ROM? If you did make a back up, and can get to Recovery (volume down and power button, then select recovery) I would wipe all data, cache and davlik cache, then flash a nandroid backup. If you didn't make a nandroid backup, I would try wiping everything again, and try flashing the ROM a second time.
http://shipped-roms.com/index.php?category=android&model=Supersonic
THAT SHOULD GET U BACK TO STOCK

help im stuck on htc evo screen logo and i cant restore

i was on Calkulin's_EViO_2_ROM_v1.8 and i rebooted to recovery to restore back to cm7 rc4 but it gives me error error while flashing image. so i try to wipe and reinstall another rom and works but it still stuck in htc logo.
Are you performing a full wipe, factory/data, cache, and dalvik?
yes i performing full wipe and everything im uisng clockworkmod recovery 3.0.0.5. did those and install a rom but still stuck in logo screen and i cant restore i made few backup and none them work!?
Have you tried going into the bootloader, select clear storage [factory reset], then flash the rom? Also are you flashing a kernel?
im just flashing regular rom on using clockworkmod. ived done this flashing roms many times and never happen like this before.
Well at this point, it seems like your old backup may be corrupted. Make a new backup, and then try to restore it.
how i do backup when i already delet wipe already so i jsut need to install another rom and do backup and restore it?
culua said:
how i do backup when i already delet wipe already so i jsut need to install another rom and do backup and restore it?
Click to expand...
Click to collapse
Correct, make a backup of your current, flash a new rom, then try and restore.
ok i install Calkulin's_EViO_2_ROM_v1.8 agian backup and try restore but it gives me boot image error same thing.
i had a similar issue. my phone wouldnt even boot past the splash screen but i was able to correct that by flashing the stock evo ruu in hboot from my sd card then reflashing a custom rom over that. im not sure if you have to re-root but in my case i had to run unrevoked again. i had to reflash at least 4 times before my issue resolved but havent had any issues since
can you show me the steps and what i need?
1. Go into recovery, select backup, backup current rom
2. Wipe factory/data, cache, dalvik cache under advanced
3. Flash a new rom, let it boot up, go back to recovery, backup that rom
4. Restore previous backup just made
You can install the official RUU upddate from sprint then download the newest HTC SYNC to your computer then plug in the phone thru the usb and run the RUU file as if you are running an app. Remember this will delete everything includidn your root but you can easily re-root with unrevoked. Hope that helps? I had that problem on my incredible and I did this and it fixed it.
Sent from my ADR6300 using XDA Premium App
teh roxxorz said:
1. Go into recovery, select backup, backup current rom
2. Wipe factory/data, cache, dalvik cache under advanced
3. Flash a new rom, let it boot up, go back to recovery, backup that rom
4. Restore previous backup just made
Click to expand...
Click to collapse
when i try wipe this thing showed up saying E: unknown volume for path [sd-ext]
culua said:
when i try wipe this thing showed up saying E: unknown volume for path [sd-ext]
Click to expand...
Click to collapse
That's a separate partition, that is okay, since you don't have it, no ened to worry about it.
teh roxxorz said:
That's a separate partition, that is okay, since you don't have it, no ened to worry about it.
Click to expand...
Click to collapse
i did follow you steps and did restore i keep getting the error image.
pena020563 said:
You can install the official RUU upddate from sprint then download the newest HTC SYNC to your computer then plug in the phone thru the usb and run the RUU file as if you are running an app. Remember this will delete everything includidn your root but you can easily re-root with unrevoked. Hope that helps? I had that problem on my incredible and I did this and it fixed it.
Sent from my ADR6300 using XDA Premium App
Click to expand...
Click to collapse
to unroot do i need 2.2 version to unroot?
If you're on hboot 2.10, you'll need a 3.70 ruu.
im sorry please show me how to unroot my phone since i cant boot up im on bootloader.
Use Sprint Lovers ROM the PC36IMG.zip version put on root of sdcard go into bootloader, update, reboot there you go. No re-root needed. I ALWAYS keep this on my sdcard root just in case. Trust me it saved my EVO more than once. You will lose everything but better lost info than lost phone. Try RA Recovery...better than any IMHO

Restoring TWRP Backup - Freeze at Boot Screen

Hey all,
I've been having some problems restoring a TWRP Backup of the stock ROM. I made the backup and then flashed another OOS based ROM, but the phone seems to freeze at the boot screen when I restore my backup. Anyone else having this problem?
Sent from my ONEPLUS A3000 using Tapatalk
Backup don't work yet (well did not work last week)
i have had this problem too, what i would try to do is download the OxygenOS version u r on and clean flash the full stock rom, then go and do a restore or try to go to advance and wipe caches, data and system, make sure not to do sd card, i have had this happen when i made a back up on 3.1.2 and tried to restore a nandroid from 3.1.0 and it froze at boot, either that or it may take awhile, on of mine took like 8 min, how long did u let it go
Bradl79 said:
i have had this problem too, what i would try to do is download the OxygenOS version u r on and clean flash the full stock rom, then go and do a restore or try to go to advance and wipe caches, data and system, make sure not to do sd card, i have had this happen when i made a back up on 3.1.2 and tried to restore a nandroid from 3.1.0 and it froze at boot, either that or it may take awhile, on of mine took like 8 min, how long did u let it go
Click to expand...
Click to collapse
I let it sit about 15 minutes or so before booting back into TWRP to reflash.

(HELP) Bootloop OP3

I have my OP3 rooted and bootloader open today I installed the newest version of Oxygen OS I installed the software throught TWRP but i forgot to wipe dalvik and the cache but surprise the boot back without problem but i went to install supersu from also TWRP said everything was installed ok and I restarted but now is on a bootloop I already wipe dalvik and cache several times and im not sure how to installe again stock recovery or even how I will be able to install Oxygen OS again, help please.
Just wipe system and data in TWRP and flash OOS again. You can get the zip file here: http://forum.xda-developers.com/oneplus-3/how-to/mirrors-official-oxygen-os-roms-ota-t3410870
jlrodriguez said:
I have my OP3 rooted and bootloader open today I installed the newest version of Oxygen OS I installed the software throught TWRP but i forgot to wipe dalvik and the cache but surprise the boot back without problem but i went to install supersu from also TWRP said everything was installed ok and I restarted but now is on a bootloop I already wipe dalvik and cache several times and im not sure how to installe again stock recovery or even how I will be able to install Oxygen OS again, help please.
Click to expand...
Click to collapse
hey first off no need to make multiple threads for the answer and secondly your question could be searched and to be honest just flash another rom. If you rooted your phone but not sure what to do afterwards thats not good. Please take time and read up on things before you go any further...
Just want to make sure you dont make multiple threads again and don't find yourself in issues that you cant get out of. .... Good Luck

Categories

Resources