So i installed a custom rom and everything went to hell so basically i tried to download the newest update for the evo 2.2 when after i put the update on the root of the phone and o the whole boot thin i install from .zip then an error comes up and i fixed that then another and over and over again...all i want now is to have the phone back to like i had it when i bought it
KR3UZL3R said:
So i installed a custom rom and everything went to hell so basically i tried to download the newest update for the evo 2.2 when after i put the update on the root of the phone and o the whole boot thin i install from .zip then an error comes up and i fixed that then another and over and over again...all i want now is to have the phone back to like i had it when i bought it
Click to expand...
Click to collapse
need more info. how did you go about trying to do this? what steps did you? More info on what you did can help someone figure out where you went wrong. Did you create a nandroid backup before you flashed the ROM? what recovery are you using? Did you wipe data (factory reset), cache, and davlik cache prior to flashing the ROM? If you did make a back up, and can get to Recovery (volume down and power button, then select recovery) I would wipe all data, cache and davlik cache, then flash a nandroid backup. If you didn't make a nandroid backup, I would try wiping everything again, and try flashing the ROM a second time.
http://shipped-roms.com/index.php?category=android&model=Supersonic
THAT SHOULD GET U BACK TO STOCK
Related
First off sorry if this is answered in another post, lease kindly direct me to the post if it is =)
I just tried to install a second ROM from ROM Manager. I was running DCU and created a back-up in ClockworkMod before I started then installed the new Fresh ROM successfully. When I tried to go back to my first ROM via the restore point I set up it gets stuck in a boot loop. The 2nd restore point from the Fresh ROM loads up just fine.
Is there anyway to fix the older restore point and get back to DCU or should I just wipe everything and reinstall DCU...
Thanks in advanced!
do a data wipe, clear cache and dalvick
Then restore your backup. Clockwork does not seem to like certain roms.
Bielinsk said:
do a data wipe, clear cache and dalvick
Then restore your backup. Clockwork does not seem to like certain roms.
Click to expand...
Click to collapse
thanks, i was able to wipe everything from the original android recovery mode and upload an old nandroid back up but from Clockwork it didnt seem to clear the dalvik cache, when i clicked clear it just went back to the last menu it never said anything in the log and when i loaded up the Clockwork backup it still didnt work :/
Okay, so earlier today I rooted my evo and flashed the CM6 ROM. A little later I tried to install Google apps.
I followed a tutorial on youtube on how to install gapps using rom manager.
Now my Evo is stuck in the Clockworkmod recovery screen and when I click reboot system now it reboots and goes back to the clockworkmod screen. I tried wiping data/factory reset and then re-installing the CM6 ROM, it did not work.
I really need some help here, I'm not too experienced and I don't want to brick my Evo. How do i fix this?? I am freaking out. Thank you!
I use AmonRA recovery personally and flash everything through recovery. I had too many problems when I tried flashing things through Rom Manager app. Do you have a nandroid backup? If so install the backup and then boot into recovery and reinstall CM6 and gapps back to back in the same recovery session. If no backup, download PC36IMG that corresponds with your hboot version and put it on the root of your sd card. Boot into bootloader by holding volume down and power at the same time. It will scan the sd card for PC36IMG and then verify it. It will then ask you if you want to update. Select yes and let it do its thing and then when it asks if you want to reboot select yes. This will put you back to stock and may unroot, so you may have to do the root procedure again. Then install CM6 and gapps in same recovery session.
Before all this try wiping cache and davlick cache and reboot. If that doesn't work try powering off phone through clockwork and then boot into bootloader. It will scan for PC36IMG and not find it then you will have options to boot into different things. Select recovery, and it will boot into Clockwork. Wipe cache and davlick cache and reboot. See if this works. If not you will have to nandroid or go back to stock probably unless someone that has had this problem and comes along to help you fix it. Always wipe cache and davlick when installing something new like gapps or kernels and full wipe when installing a new Rom, unless you are updating a Rom then just Davlick and Cache.
As long as the phone turns on it is not bricked.
housry23 said:
I use AmonRA recovery personally and flash everything through recovery. I had too many problems when I tried flashing things through Rom Manager app. Do you have a nandroid backup? If so install the backup and then boot into recovery and reinstall CM6 and gapps back to back in the same recovery session. If no backup, download PC36IMG that corresponds with your hboot version and put it on the root of your sd card. Boot into bootloader by holding volume down and power at the same time. It will scan the sd card for PC36IMG and then verify it. It will then ask you if you want to update. Select yes and let it do its thing and then when it asks if you want to reboot select yes. This will put you back to stock and may unroot, so you may have to do the root procedure again. Then install CM6 and gapps in same recovery session.
Before all this try wiping cache and davlick cache and reboot. If that doesn't work try powering off phone through clockwork and then boot into bootloader. It will scan for PC36IMG and not find it then you will have options to boot into different things. Select recovery, and it will boot into Clockwork. Wipe cache and davlick cache and reboot. See if this works. If not you will have to nandroid or go back to stock probably unless someone that has had this problem and comes along to help you fix it. Always wipe cache and davlick when installing something new like gapps or kernels and full wipe when installing a new Rom, unless you are updating a Rom then just Davlick and Cache.
As long as the phone turns on it is not bricked.
Click to expand...
Click to collapse
Where can I download the pc36img? Also, it seems that when I try to wipe dalvik cache, it doesn't do anything.
try here
http://forum.xda-developers.com/showthread.php?t=884060&highlight=unroot
If you are having issues getting the img on your SD card, if you have a card reader handy just use that to transfer it over
Tower1972 said:
try here
http://forum.xda-developers.com/showthread.php?t=884060&highlight=unroot
If you are having issues getting the img on your SD card, if you have a card reader handy just use that to transfer it over
Click to expand...
Click to collapse
I did find the correct one for my hboot version, but another question I have is do I need to flash unrevoked-forever-son.zip since I rooted using unrevoked 3.32? Or do I just put the PC36IMG on the sd card and flash it? Thanks.
Okay, I seem to have gotten it back to stock. Thank god, thought I lost my evo for a minute! Thanks to those who helped me out, its 4:45 in the morning and now I can finally go to bed! ;]
LOL glad ya got it back.. Yeah thats where I was heading before I seen your post..Its 5:46 am and Im not sure how many Evo people are actually on at this time so...anyway nite
I stayed on to help as long as I could, but had to go to work. Sorry I couldn't be here to help with more questions. Funny I was just getting up for work and you guys were just going to bed.
Glad you got it fixed for now. Remember to flash CM6 from recovery and not Rom Manager. Also, flash Gapps from recovery and not Rom Manager app. Flash CM then gapps and reboot. Make sure you do a full wipe first though. You could also look for Calkulin's tools thread in Dev section of EVO forum and find his wipe all zip. You just flash it like any other zip but it formats data, cache, boot and system partitions so that when you flash a new ROM nothing is left over from old one. Good luck my friend and happy flashing.
PS. I don't think the stock rom would give you s-on since you already had s-off, so you should be good to go. I could be wrong, but as long as you still have a custom recovery and s-off you should be good to flash any Rom.
evo camera
ok i have a root evo but my camara dosent work ... can some body help me to fx that problem
What rom are you using? Do they list camera issues or camera not working in the initial post with the rom?
Camera
Lets talk about the camera not working here:
http://forum.xda-developers.com/showthread.php?p=10983385
Hey Everyone,
I had Starburst with Data2SD flashed on my Desire with some things cooked in from the UOT. I found the MIUI ROM and I figured I wanted to try it. I made a Recovery backup so that if I didn't like it, I could get right back to where I left off. I flashed the CDMA MIUI ROM which was a mistake because my Desire is GSM (Doh) But I went in to recovery and selected the backup I made before I flashed MIUI and restored it, it restored successfully but when I reboot it just sits at the white screen that says htc and it doesn't go anywhere after that. I can reflash the Starburst ROM and reinstall the Data2SD and it will boot and everything and then I go back in to recovery and restore just the data from the back up and it doesn't boot after that. Can anyone help me figure out where I'm going wrong? I don't really want to start from scratch. Any help is appreciated. If you think you can help but don't understand what I'm asking, either post here or PM me. Thanks. I would really like my Desire to work so I can stop using my dreaded Iphone.
Did you do a full wipe before you restored your backup? Make sure you do a factory reset/data wipe, cache wipe and dalvik wipe (from advanced menu)
If it still does not work, try wipe just the cache and dalvik cache after restoring the backup and see if it will boot then.
i was on Calkulin's_EViO_2_ROM_v1.8 and i rebooted to recovery to restore back to cm7 rc4 but it gives me error error while flashing image. so i try to wipe and reinstall another rom and works but it still stuck in htc logo.
Are you performing a full wipe, factory/data, cache, and dalvik?
yes i performing full wipe and everything im uisng clockworkmod recovery 3.0.0.5. did those and install a rom but still stuck in logo screen and i cant restore i made few backup and none them work!?
Have you tried going into the bootloader, select clear storage [factory reset], then flash the rom? Also are you flashing a kernel?
im just flashing regular rom on using clockworkmod. ived done this flashing roms many times and never happen like this before.
Well at this point, it seems like your old backup may be corrupted. Make a new backup, and then try to restore it.
how i do backup when i already delet wipe already so i jsut need to install another rom and do backup and restore it?
culua said:
how i do backup when i already delet wipe already so i jsut need to install another rom and do backup and restore it?
Click to expand...
Click to collapse
Correct, make a backup of your current, flash a new rom, then try and restore.
ok i install Calkulin's_EViO_2_ROM_v1.8 agian backup and try restore but it gives me boot image error same thing.
i had a similar issue. my phone wouldnt even boot past the splash screen but i was able to correct that by flashing the stock evo ruu in hboot from my sd card then reflashing a custom rom over that. im not sure if you have to re-root but in my case i had to run unrevoked again. i had to reflash at least 4 times before my issue resolved but havent had any issues since
can you show me the steps and what i need?
1. Go into recovery, select backup, backup current rom
2. Wipe factory/data, cache, dalvik cache under advanced
3. Flash a new rom, let it boot up, go back to recovery, backup that rom
4. Restore previous backup just made
You can install the official RUU upddate from sprint then download the newest HTC SYNC to your computer then plug in the phone thru the usb and run the RUU file as if you are running an app. Remember this will delete everything includidn your root but you can easily re-root with unrevoked. Hope that helps? I had that problem on my incredible and I did this and it fixed it.
Sent from my ADR6300 using XDA Premium App
teh roxxorz said:
1. Go into recovery, select backup, backup current rom
2. Wipe factory/data, cache, dalvik cache under advanced
3. Flash a new rom, let it boot up, go back to recovery, backup that rom
4. Restore previous backup just made
Click to expand...
Click to collapse
when i try wipe this thing showed up saying E: unknown volume for path [sd-ext]
culua said:
when i try wipe this thing showed up saying E: unknown volume for path [sd-ext]
Click to expand...
Click to collapse
That's a separate partition, that is okay, since you don't have it, no ened to worry about it.
teh roxxorz said:
That's a separate partition, that is okay, since you don't have it, no ened to worry about it.
Click to expand...
Click to collapse
i did follow you steps and did restore i keep getting the error image.
pena020563 said:
You can install the official RUU upddate from sprint then download the newest HTC SYNC to your computer then plug in the phone thru the usb and run the RUU file as if you are running an app. Remember this will delete everything includidn your root but you can easily re-root with unrevoked. Hope that helps? I had that problem on my incredible and I did this and it fixed it.
Sent from my ADR6300 using XDA Premium App
Click to expand...
Click to collapse
to unroot do i need 2.2 version to unroot?
If you're on hboot 2.10, you'll need a 3.70 ruu.
im sorry please show me how to unroot my phone since i cant boot up im on bootloader.
Use Sprint Lovers ROM the PC36IMG.zip version put on root of sdcard go into bootloader, update, reboot there you go. No re-root needed. I ALWAYS keep this on my sdcard root just in case. Trust me it saved my EVO more than once. You will lose everything but better lost info than lost phone. Try RA Recovery...better than any IMHO
Hi all, hoping this is a stupidly simple fix. I wanted to update to latest stable CM7 and so downloaded and flashed it from CWRecovery,
I also ran the factory reset, and cleared the cache.
When I boot, it shows the blue loading screen, then comes to the "Welcome to ADR6300" and reverts to the CyanogenMod7 loading screen..
Then, it keeps bouncing back and forth between these two screens until I pull the battery...
You didn't mention the order of what you did. Assuming you have no valuable data, I would just start over.
Reboot into recovery
Wipe system
Factory reset
Flash ROM
Flash GAPPs (if desired)
Reboot into ROM
Also, ensure you're on the latest CWM, first.
[Solved]
PonsAsinorem said:
You didn't mention the order of what you did. Assuming you have no valuable data, I would just start over.
Reboot into recovery
Wipe system
Factory reset
Flash ROM
Flash GAPPs (if desired)
Reboot into ROM
Also, ensure you're on the latest CWM, first.
Click to expand...
Click to collapse
Worked perfectly! Thank you!!
Apparently the problem was having the wrong version of GAPPs. I was reinstalling but Wiping system was the step I had skipped!