Hi, I have foolishly (possibly?) wiped Android off of my OneX
I was attempting to apply the Tegra tweak and well things went downhill.
I successfully unlocked the bootloader from HTCdev.
I proceeded to apply Interim ClockworkMod to gain root access
This is where things started to go wrong. Any new reboot would only take me to Clockworkmod screen.
I tried http://forum.xda-developers.com/showthread.php?t=1599748
clear cache, davik cache... relocking the bootloader - This results in the device constantly rebooting.
I attempted to apply the RUU ROM's ( from: http://forum.xda-developers.com/showthread.php?t=1543604)
From within ClockworkMod I was then able to:
adb push One_X_1.26.401.2_odexed.zip /sdcard/
Once there I used ClockworkMod to apply an update zip (which I was hoping was the Stock ROM).
A reboot just brought me back to Clockwork.
I then locked the bootloader ( fastboot oem lock. ) hoping it would then proceed to boot as expected.
It didn't just going to HBOOT or an attempted recovery (isometric view of a phone with a green arrowed circle -> RED triangle).
Please someone help, starting to panic a bit. The fact I can upload, the fact that there is some basic interactions should imply this is fixable, but how?
The boot to recovery sounds like you have the same problem that I had.
Perhaps you followed the same incorrect instructions as I did. See here for a solution.
mwhincup said:
The boot to recovery sounds like you have the same problem that I had.
Perhaps you followed the same incorrect instructions as I did. See here for a solution.
Click to expand...
Click to collapse
This may help.
with the locked bootloader you will only be able to run a proper ruu so before even attempting the instruction above unlock your bootloader again and proceed from there.
I might start working on some core .IMG files that can be flashed through fastboot to get you going again tomorrow
Sent from my HTC One X using XDA
THANKS!!!
booted back to the lovely ICS desktop
It looks like I did end up flashing RUU since none of the Vodafone branding is present (and it is actually better!)
No idea what went wrong but probably flashed over the boot as hinted at in the other thread.
The provided img files assisted. just need to get this Tegra thing working (not showing up as a running/registered process but thats another story)
Thanks all
edit: sorry forgot to even mention my phone..
its the 4gb ram 55ml
unlocked bootloader before rooting
after unlocking bootloader, its now stuck in unlock successful reboot in 5 seconds loop if i try to access bootloader
cant root for the app used to just flash a rom on because of the 5 second loop
i downloaded the WW_ZE551ML_2.15.40.13_20150506 raw file to abd side load (thinking this was what i needed to fix everything
cant apply anything because of the 5 second loop
phones current state
all cache and data wiped and just redid all the new settings and unlocked developer
current bootloader info (hope someone can read this... cause i dont have anything to take a clearer picture :/
http: //puu.sh/nmoau/991dcd66bb.jpg
if i try to do recovery apply from adb update. the sideload errors saying the footer is wrong and the signature verification failed aborting the install..
can someone please help me?
all i wanted was to install super zen </3... and ofc have root
http://forum.xda-developers.com/showpost.php?p=64569453&postcount=441
update: new issue: reached to .156* and tried using twrp to apply the superzen.
android goes to recovery and then shows the sleeping android with the red triangle so twrp cant complete its steps to install superzen
Please dont reply harshly or bump me, I just got this account to ask for help here so i dont know all the rules and im not that tech savvy, anyways: So I had the newest oxygen os, then I rooted, installed twrp, unlocked bootloader, flashed Hydrogen Os all successfully. Then it became a hassle and I wanted to unroot and revert to 100% stock. So, I downloaded the stock firmware for Oxygen Os, Then I unrooted through Superuser, then went into recovery, wiped cache/dalvik/data, then flashed stock firmware. HERE'S WHERE THE PROBLEM STARTS, it first went into a bootloop, so I restarted it, then it booted successfully and i set it all up with a pin and fingerprint. Anyways, so once I got in, I wanted to relock the bootloader so i went into the settings, disabled the "oem unlock option", turned off my phone, went into fastboot, then typed "fastboot oem lock" and relocked the bootloader. THE REAL PROBLEM IS HERE: When I turned on my phone again and it booted, an all black screen came up that said "To start android please enter your password" so I entered the pin I set earlier, and it was wrong. No matter what i entered it said I was wrong. So, I shut off my phone and tried to go into recovery, and instead the OnePlus logo flashed then the phone turned off. So I went into fastboot and tried to wipe the data but it said partition erase is not allowed, then I tried to flash the stock and twrp and both times it said it failed too saying partition flashing is not allowed. So 1. I can't flash anything or wipe anything because its not allowed. 2. I cant get into android because it says my password is wrong. 3. I cant get into recovery because the Oneplus logo just flashes then phone turns off. PLEASE HELP ME THIS IS THE ONLY PHONE I HAVE!!!!
You should try Fastboot EDL. search Google. Good luck
scottwitha5 said:
Please dont reply harshly or bump me, I just got this account to ask for help here so i dont know all the rules and im not that tech savvy, anyways: So I had the newest oxygen os, then I rooted, installed twrp, unlocked bootloader, flashed Hydrogen Os all successfully. Then it became a hassle and I wanted to unroot and revert to 100% stock. So, I downloaded the stock firmware for Oxygen Os, Then I unrooted through Superuser, then went into recovery, wiped cache/dalvik/data, then flashed stock firmware. HERE'S WHERE THE PROBLEM STARTS, it first went into a bootloop, so I restarted it, then it booted successfully and i set it all up with a pin and fingerprint. Anyways, so once I got in, I wanted to relock the bootloader so i went into the settings, disabled the "oem unlock option", turned off my phone, went into fastboot, then typed "fastboot oem lock" and relocked the bootloader. THE REAL PROBLEM IS HERE: When I turned on my phone again and it booted, an all black screen came up that said "To start android please enter your password" so I entered the pin I set earlier, and it was wrong. No matter what i entered it said I was wrong. So, I shut off my phone and tried to go into recovery, and instead the OnePlus logo flashed then the phone turned off. So I went into fastboot and tried to wipe the data but it said partition erase is not allowed, then I tried to flash the stock and twrp and both times it said it failed too saying partition flashing is not allowed. So 1. I can't flash anything or wipe anything because its not allowed. 2. I cant get into android because it says my password is wrong. 3. I cant get into recovery because the Oneplus logo just flashes then phone turns off. PLEASE HELP ME THIS IS THE ONLY PHONE I HAVE!!!!
Click to expand...
Click to collapse
Give this thread a read.
http://forum.xda-developers.com/showthread.php?t=3405700
Several people have had success reviving their OP3. Also, there is an option to contact OnePlus support and have a remote session with their tech support. They will send you an email with files to download and will walk you thru what you need to do for them to unbrick your device.
Sent from my Nexus 6 using XDA-Developers mobile app
Try reflashing stock firmware with fastboot.
fast69mopar said:
Give this thread a read.
http://forum.xda-developers.com/showthread.php?t=3405700
Several people have had success reviving their OP3. Also, there is an option to contact OnePlus support and have a remote session with their tech support. They will send you an email with files to download and will walk you thru what you need to do for them to unbrick your device.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
Windows wont install the drivers on the thread so i cant proceed and the next available date for Oneplus tech is July 24th this is so urgent....any other options?
Nv1dia said:
Try reflashing stock firmware with fastboot.
Click to expand...
Click to collapse
I cant because says flashing isnt allowed
scottwitha5 said:
Please dont reply harshly or bump me, I just got this account to ask for help here so i dont know all the rules and im not that tech savvy, anyways: So I had the newest oxygen os, then I rooted, installed twrp, unlocked bootloader, flashed Hydrogen Os all successfully. Then it became a hassle and I wanted to unroot and revert to 100% stock. So, I downloaded the stock firmware for Oxygen Os, Then I unrooted through Superuser, then went into recovery, wiped cache/dalvik/data, then flashed stock firmware. HERE'S WHERE THE PROBLEM STARTS, it first went into a bootloop, so I restarted it, then it booted successfully and i set it all up with a pin and fingerprint. Anyways, so once I got in, I wanted to relock the bootloader so i went into the settings, disabled the "oem unlock option", turned off my phone, went into fastboot, then typed "fastboot oem lock" and relocked the bootloader. THE REAL PROBLEM IS HERE: When I turned on my phone again and it booted, an all black screen came up that said "To start android please enter your password" so I entered the pin I set earlier, and it was wrong. No matter what i entered it said I was wrong. So, I shut off my phone and tried to go into recovery, and instead the OnePlus logo flashed then the phone turned off. So I went into fastboot and tried to wipe the data but it said partition erase is not allowed, then I tried to flash the stock and twrp and both times it said it failed too saying partition flashing is not allowed. So 1. I can't flash anything or wipe anything because its not allowed. 2. I cant get into android because it says my password is wrong. 3. I cant get into recovery because the Oneplus logo just flashes then phone turns off. PLEASE HELP ME THIS IS THE ONLY PHONE I HAVE!!!!
Click to expand...
Click to collapse
Anybody?? Please help
scottwitha5 said:
Anybody?? Please help
Click to expand...
Click to collapse
Update: I followed the Mega Unbrick Guide for a hard bricked Oneplus 3, and now instead of even starting android, this appears, and I cant get into recovery or flash anything because it isnt allowed....please help me
I think your error was to relock the bootloader because if it was still unlocked, you could still reflash the boot.img (but your relocked your bootloader)
Solving it.
Don't worry I shall help you.
This happened to me too.
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
To get the drivers and adb along with twrp and root use this toolkit.
http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Get the Oneplus drivers through this too.
It's not very complicated but ask me for any help.
Use the Method 2 in the Mega UnBrick Guide and download the stock image on to it.
You will lose data all of it.!
Make it boot.
Then tick OEM unlocking
Unlock bootloader through the toolkit.
flash twrp and root done..!!.
You messed up when you ticked off OEM unlocking and fastbooting it.
Hi i have a pixel xl. I had it rooted via magisk and I had LOS on it. But then i decided to go back to stock. I did that but i forgot that I had to uninstall magisk so i locked the bootloader and wound up with a stock rom rooted. It worked for a while them it started crashing. Im not too sure what happened or what i did it was a year ago. So anyway when i turn it on it says the bootloader is corrupt which it did before. Android flash tool did not work wok. I can boot into recovery but i dont know what to mdo no.
can someone please help me.
Also I am able to use fastboot I just tried from my pc. I just dont know what to do to fix this. I know I have to somehow get twrp back on the phone and flash the magisk uninstall.zip. But this was so long ago i dont even remember which version of magisk I was using or which magisk uninstall file to flash.
i was able to get a flash-all .bat to work but im still in the same position. Basically the phone gives me the message your device cant be checked for corruption then goes on to the google screen and eventually the screen goes blank and it starts over so it is bootlooping i guess.
Can anyone tell me how i can flash twrp.img on the phone with fastboot? Right now the current active slot is b. I tried typing fastboot flash b then the twrp.img file name and it gives me an error. Am I supposed to be flashing to a certain partition?
Please someone help I am not very good with the command line. I dont know all the lingo
So I wanted to try the android developer preview 14 which wasn't bad at all but I'm trying to flash back using the android flash tool and the trouble that I'm having is locking back the bootloader. I don't have a desktop CPU or a laptop but I did because I read that the android flash tool would work and so far it hasn't worked, correction it works but I can't lock bootloader and I always get the dumb message every time phone reset. I wanna know to anyone who uses the android flash tool how are you supposed to lock the bootloader when it give instructions to cause when fastboot pops up the options are only to restart bootloader boot into recovery and etc but no lock bootloader.
Sorry I have a Chromebook the runs windows 9 but has chrome os on it.
There is an option in android flash tool to lock BL after flash. You must have missed it
Yes very aware but it doesn't lock I think in screen it will say bootloader need to be locked in order to complete process and that's the part on stuck on when the phone boots into fastboot you can see the status of the phone etc but no but if I try to boot into recovery or recuse mode it's goes to this weird error screen letting me know Bootloader unlocked with a little website to see what the error is. So the flash isn't working for me well it's working I've managed to flash the build but the lock part just doesn't work at all.