Xposed Framework Is Not Installed - Installation Help - One (M9) Q&A, Help & Troubleshooting

Hey guys,
I have a HTC M9
I am trying to install the Xposed Framework on my Rooted M9 with stock ROM but inside the Xposed app it tells me that it's not installed.
I have TWRP installed.
I rooted my phone with SuperSU v2.65 (After trying a couple of versions that would result in boot loop)
I checked my phones CPU (ARM64) and downloaded "xposed-v86-sdk23-arm64" as well as "XposedInstaller_3.0_alpha4.apk".
I booted into TWRP and Installed the xposed-v86-sdk23-arm64 Framework, it gets to Placing Files and then my phone reboots (I don't know if this is normal or not).
My phone reboots and I open XposedInstaller, under Framework it says "The latest version of Xposed is currently not active, Did you install the Framework and reboot?"
Inside the Framework menu it says "The Xposed Framework is not installed. Please download the latest ZIP file from XDA and flash it manually via reocvery."
The options Install/Update, Uninstall, Recovery (Flash zip automatically) are grayed out.
When I press the Soft Reboot button the phone does restart but no change.
When I try to press the Reboot option I get this error:
Code:
sush: <stdin>[8]: /data/user/0/de.robv.android.xposed.installer/cache/busybox-xposed: not found
Reboot failed please use the device's normal reboot function.
I have restarted the phone normally a couple of times with no change.
I'm new to rooting but I don't find this stuff too difficult to understand, I had a lot of problems trying to get my phone to root in the beginning, I had to try a few SuperSU versions before I could get my phone past boot looping. When I run Root Check it tells me that my phone is Rooted.
I'm not sure what other information I can post to help yous help me but if there's anything you need to know just ask and I'll reply asap.
Cheers guys

I basically want access to Xposed so I can use the FakeGPS and the Hide Mock Location modules.
EDIT (29/07 2:00PM)
I re-downloaded xposed-v86-sdk23-arm64 and tried flashing it again, I read somewhere someone mentioning to clear the caches after the install has finished but when I start the install and it reaches "Placing Files" the phone automatically reboots itself, so I held Volume down and Power to go straight back into Download Mode > Boot Mode > Recovery Mode and cleared the caches, let the phone boot up and still have the exact same problem as the above post.
Seeing as though I haven't gotten any advice yet I am going to try an older version of the Installer app, I have 2 seperate backups of my device so if anything goes wrong I can restore, wish me luck!

I have almost the same problem, with the exception that I don't get to see errors.
I have it rooted with superSU 2.64 (beta) and with TWRP 3.0.2.
Start the flash process using TWRP and after a couple of seconds it just black screens and reboots. Some times it survives and boots, sometimes it doesn't boot.
Since I have backed up my whole system before rooting, I can return back to normal.
The funny thing is, I have managed to install Xposed on the first run, but after restoring a back up, it refuses.
No idea what to do

Wolf_vx said:
I have almost the same problem, with the exception that I don't get to see errors.
I have it rooted with superSU 2.64 (beta) and with TWRP 3.0.2.
Start the flash process using TWRP and after a couple of seconds it just black screens and reboots. Some times it survives and boots, sometimes it doesn't boot.
Since I have backed up my whole system before rooting, I can return back to normal.
The funny thing is, I have managed to install Xposed on the first run, but after restoring a back up, it refuses.
No idea what to do
Click to expand...
Click to collapse
You have described my situation perfectly.
I have a back up I can restore through TWRP if I soft brick it, which at this moment I just did.
I tried flashing the same superSU version again seeing as though it was the only one I could get to work (didn't try your version though) and then installed the latest Framework version right after without rebooting, cleared the two caches and rebooted, I get past the first boot screen, I see my mobile providers boot screen, I then get to the screen with One in big letters and it stops there, I'll try a few more reboots before I restore.

Xposed isn't stable on the m9 and is why I have avoided installing it. Some people get it running first time, no issues. Some people brick their phones. It really is a roll of the dice.
I'd stay away from it if i were you. Htc's can't be easily recovered.
Beamed in by telepathy.

it doesn't brick the phone, but there are a few tutorials with other methods of flashing xposed, should be inside software development of android forum. please try those solutions and please stop creating two threads, with nearly same problem. both things can be asked in one thread, thanks
stock rom has often problems. you need to install busybox to have it working properly

Related

[Q] Boot loop after installing busy-boxon HTC One

Hi, I installed busy-box to my HTC with stock ROM and kernel, and now Im having problems keeping my phone from not rebooting. My phone reboots like normal and I can use it normally for about a minute until it reboots. Prior to this it was working fine.I now know there are problems installing busy box to stock ROMs.. At this point I'm willing to do just about anything to get my phone back to its previous state. Preferably still rooted and with my data still intact.
When I installed busy-box I installed to the /system/xbin directory. A install notifier came up saying that busy box was already installed and doing this may not be required then it rebooted. Im not sure if Ialso did the smart install because it did not say smart install was finished or was ready to be finished. I can still access the TWRP recovery screen.
I would like to inform I am a cheeky scrub when it comes to dealing with situations like this so preferable please insruct me with simple and easy instructions.
Thank you so much in advance!
tried doing wipe cache/ wipe davilk?

[Q] Quick question about stock recovery

Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
ericksonline said:
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
Click to expand...
Click to collapse
Yes you can go to software number to get the info you need. To do an OTA you need a stock sense ROM (NO CHANGES TO ANY SYSTEM APPS) you then need to flash the correct recovery for your software number and [IMPORTANT] relock the bootloader. You then can reboot into your system and take the OTA while still being able to unlock the bootloader and flash a custom recovery afterwards.
No need to relock the bootloader for an ota. People should stop spreading that info
Thanks for the replies!
Just to check my understanding, since I simply unlocked the bootloader, used the TWRP recovery, added SuperSU, installed then uninstalled Xposed framework, that means that I should still be on a stock sense ROM (with no changes to any system apps), right?
There is a lot to learn with all of this when you are first starting out. I'm reading a lot, but sometimes you do find conflicting information. I'd rather be a little cautious than do something stupid!
Thanks again!
ericksonline said:
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
Click to expand...
Click to collapse
ericksonline said:
Thanks for the replies!
Just to check my understanding, since I simply unlocked the bootloader, used the TWRP recovery, added SuperSU, installed then uninstalled Xposed framework, that means that I should still be on a stock sense ROM (with no changes to any system apps), right?
There is a lot to learn with all of this when you are first starting out. I'm reading a lot, but sometimes you do find conflicting information. I'd rather be a little cautious than do something stupid!
Thanks again!
Click to expand...
Click to collapse
Yup you're good ROM wise. Just flash the stock recovery and you should be good to go.
You can be unlock and have OTA.
You just need a stock recovery.
HTC ONE M8 fails to load up after failed software update
Hello guys, this is my first post. I really need your help as I'm at risk of loosing all my phone data. My phone internal memory had been exhausted and I bought an external SD card. I am unable to transfer data to the external SD card. I was doing a software update on my phone that failed to install, there was a warning sign on the phone screen for a few minutes then it try to power on but has failed, as it's seem to stuck on the screen that display htc powered by android. I tried the recovery holding down the power button and the column up button, the phone power off and back on but is still stuck on this screen (htc powered by android). I tried connecting the phone to my laptop to try and recover my data, but it's not mounting to the laptop. Please can someone help me. Thanks in advance.
Similar to the post above ie rooted and kept on stock. Also loaded a few Xposed modules but when I connected to my wifi I had over 30 updates so loaded all of them and once loaded the old bootloop started. I restored my nandroid backup from TWRP (this is an essential backup) and I was back in action. Phew!!!! I no longer had Xposed. So I did the updates again and the same thing happened. I am now updating one at a time which is painful when you've got so many. I also tried wiping the caches but that didn't work.
I noticed there were a lot of HTC apps eg HTC sense input, service pack, blinkfeed etc. I also notice a super SU update. ericksonlines post above said he had a problem with superSU. What kind of problem? What does he mean by reapplying? Flashing from TWRP?
So the big question. Which app(s) update did the damage???
Any apps I shouldn't update eg HTCs?
Has this happened to anyone else? What did you then do? Is the new updated superSU the problem
Apologies for cross posting on an Australian site but I'm a bit frazzled with all of this.
jbarr3 said:
Similar to the post above ie rooted and kept on stock. Also loaded a few Xposed modules but when I connected to my wifi I had over 30 updates so loaded all of them and once loaded the old bootloop started. I restored my nandroid backup from TWRP (this is an essential backup) and I was back in action. Phew!!!! I no longer had Xposed. So I did the updates again and the same thing happened. I am now updating one at a time which is painful when you've got so many. I also tried wiping the caches but that didn't work.
I noticed there were a lot of HTC apps eg HTC sense input, service pack, blinkfeed etc. I also notice a super SU update. ericksonlines post above said he had a problem with superSU. What kind of problem? What does he mean by reapplying? Flashing from TWRP?
So the big question. Which app(s) update did the damage???
Any apps I shouldn't update eg HTCs?
Has this happened to anyone else? What did you then do? Is the new updated superSU the problem
Apologies for cross posting on an Australian site but I'm a bit frazzled with all of this.
Click to expand...
Click to collapse
Hello! It is possible that an update came through that caused my phone to start into the boot loop. I'm not sure because it worked fine for a few hours before the problem started happening all of the sudden. My guess is that something updated that broke SuperSU. As soon as something would try to use SuperSU (or maybe the rights granted by SuperSU), the phone would crash and reboot. To fix the problem, I rebooted into the bootloader (TWRP) and re-installed SuperSU from there. After I re-installed, everything began working nicely again. I have not had a problem since and the problem occurred a few months ago now. I have also recently updated to the new version of SuperSU with no problems at all.
I hope this helps!
Ron
ericksonline said:
Hello! It is possible that an update came through that caused my phone to start into the boot loop. I'm not sure because it worked fine for a few hours before the problem started happening all of the sudden. My guess is that something updated that broke SuperSU. As soon as something would try to use SuperSU (or maybe the rights granted by SuperSU), the phone would crash and reboot. To fix the problem, I rebooted into the bootloader (TWRP) and re-installed SuperSU from there. After I re-installed, everything began working nicely again. I have not had a problem since and the problem occurred a few months ago now. I have also recently updated to the new version of SuperSU with no problems at all.
I hope this helps!
Ron
Click to expand...
Click to collapse
You're dead right Ron. Supersu was the culprit. Just simply updating from the playstore caused this. I restored an android backup which got me back. I went into the old SuperSu (V1.94) and clicked "clean up when updating from google play" or similar, did the update again (v 2.04 from google) and while this didn't cause rebooting, I couldn't install the binary. I chose "normal" (maybe I should have chosen TWRP) and it didn't work. So I flashed my old v1.94 from TWRP and that got me back. So some questions on updating SuperSu.
1. Is flashing the zip file through TWRP the best way to install a new version?
2. Should I delete or uninstall the old version or will flashing do that for me? Did you simply flash over the top of the other one?
3. Should I stick with 1.94, which works, or should I update to a new and improved version?
4. I think 2.16 is the latest. What version are you running, is it stable and do you recommend it ?
5. I assume I get the zip file from chainfire. They are way ahead of the google playstore for updates
jbarr3 said:
You're dead right Ron. Supersu was the culprit. Just simply updating from the playstore caused this. I restored an android backup which got me back. I went into the old SuperSu (V1.94) and clicked "clean up when updating from google play" or similar, did the update again (v 2.04 from google) and while this didn't cause rebooting, I couldn't install the binary. I chose "normal" (maybe I should have chosen TWRP) and it didn't work. So I flashed my old v1.94 from TWRP and that got me back. So some questions on updating SuperSu.
1. Is flashing the zip file through TWRP the best way to install a new version?
2. Should I delete or uninstall the old version or will flashing do that for me? Did you simply flash over the top of the other one?
3. Should I stick with 1.94, which works, or should I update to a new and improved version?
4. I think 2.16 is the latest. What version are you running, is it stable and do you recommend it ?
5. I assume I get the zip file from chainfire. They are way ahead of the google playstore for updates
Click to expand...
Click to collapse
I'm no expert, but I'm happy to share my experience. I do believe that flashing from TWRP is the best way to install. That is what I did to fix my reboot problems. I don't recall uninstalling the previous version in any way. I think the old file was still on there. I browsed to it in TWRP and installed it. I'm not sure what version I was on when I did this. Recently, a new update (2.16) was available that downloaded through the Play Store. When I went to update, it recommended that I use TWRP to install. I didn't go this route because I had already switched back to the default bootloader and didn't want to reinstall TWRP if I didn't have to. So, I just used the "normal" method. It updated successfully and I've had no problems. I am now running 2.16.
ericksonline said:
I'm no expert, but I'm happy to share my experience. I do believe that flashing from TWRP is the best way to install. That is what I did to fix my reboot problems. I don't recall uninstalling the previous version in any way. I think the old file was still on there. I browsed to it in TWRP and installed it. I'm not sure what version I was on when I did this. Recently, a new update (2.16) was available that downloaded through the Play Store. When I went to update, it recommended that I use TWRP to install. I didn't go this route because I had already switched back to the default bootloader and didn't want to reinstall TWRP if I didn't have to. So, I just used the "normal" method. It updated successfully and I've had no problems. I am now running 2.16.
Click to expand...
Click to collapse
Thanks erick but given what's happened I don't think I'll ever update from the playstore again. I'll load 2.16 using TWRP and report back. I can't stress enough how important it is to have a nandroid backup. I reckon its the best reason to load a custom recovery. Its got me out of trouble twice now and gives me piece of mind. I've actually gone overboard on this and I have two backups on my phone which I have copied to my PC..
vm54 said:
You can be unlock and have OTA.
You just need a stock recovery.
Click to expand...
Click to collapse
And stock ROM.
Updated to v 2.16. Piece of cake!!!
Loaded through TWRP, rebooted and that was it. It didn't even ask about installing the binary. Same binary I guess.
It worried me, however, when I saw over 700 pages on this version xda. Most with problems.
jbarr3 said:
Updated to v 2.16. Piece of cake!!!
Loaded through TWRP, rebooted and that was it. It didn't even ask about installing the binary. Same binary I guess.
It worried me, however, when I saw over 700 pages on this version xda. Most with problems.
Click to expand...
Click to collapse
Awesome! I'm glad to hear that it worked!

[Q] Really need your expert help guys! SM-T800

Alright, I'll lay out what happened. My end goal is to just have a rooted tab, but at this point, I'd be willing to just have it back to how it was. Preferably without losing everything on it.
-Looked around on how to root it, and found the following, and use the files it suggested.
- Seemed easy enough, and I had rooted/installed android on my old HP Touchpad, so I dl'd the files, and gave it a shot.
- Couldn't get CWM recovery on it, so I ran verify root and it said it wasn't rooted, even though I has SuperSU. It would even ask to grant apps permission, and I'd grant it.
- I opened SuperSU, and it'd say it needed to update the binaries, but would fail on normal, so I dl'd the newest zip, booted into recovery, and tried to load it like that, but 2 lines would come up red. I think they were just verifying signatures, so I ignored it and let it reboot.
- I opened SuperSU again, and it still said it needed the binaries updated, failed on normal attempt. I decided to try again from scratch, unrooting it and all. So, I went into the SuperSU settings and did it's thing, but it still had the version of SuperSU that initially was on it (it wouldn't let me past the "update binaries" prompt).
- I found that I needed to use Odin to flash a stock firmware back on it, and dl'd both version here.
- I tried the first one, and then it wouldn't get past the "Samsung" screen (the 2nd one with just the word Samsung, if it matters).
- I can still boot into Odin and Recovery, thankfully, so I tried the 2nd stock firmware. Same issue.
- Finally, I tried the rooting process again, hoping to get it to boot, same thing. So, I tried the 2nd stock firmware again, praying something good would happen, and still stuck on the Samsung screen.
I can still boot into Odin and recovery, but I have no idea where to go from here. I still want it rooted if possible, and I'd prefer not to lose all my games and such. I just found "[ROOT][RECOVERY] [ALL IN ONE] Cf-Autoroot-twrp-T800-T805-T-700-T705" thread here, but I didn't want to try it just yet.
It's a SM-T800. I had Lollipop on it. Don't know much else to add, but please help!
Thanks all.
Cypher5235 said:
Alright, I'll lay out what happened. My end goal is to just have a rooted tab, but at this point, I'd be willing to just have it back to how it was. Preferably without losing everything on it.
-Looked around on how to root it, and found the following, and use the files it suggested.
- Seemed easy enough, and I had rooted/installed android on my old HP Touchpad, so I dl'd the files, and gave it a shot.
- Couldn't get CWM recovery on it, so I ran verify root and it said it wasn't rooted, even though I has SuperSU. It would even ask to grant apps permission, and I'd grant it.
- I opened SuperSU, and it'd say it needed to update the binaries, but would fail on normal, so I dl'd the newest zip, booted into recovery, and tried to load it like that, but 2 lines would come up red. I think they were just verifying signatures, so I ignored it and let it reboot.
- I opened SuperSU again, and it still said it needed the binaries updated, failed on normal attempt. I decided to try again from scratch, unrooting it and all. So, I went into the SuperSU settings and did it's thing, but it still had the version of SuperSU that initially was on it (it wouldn't let me past the "update binaries" prompt).
- I found that I needed to use Odin to flash a stock firmware back on it, and dl'd both version here.
- I tried the first one, and then it wouldn't get past the "Samsung" screen (the 2nd one with just the word Samsung, if it matters).
- I can still boot into Odin and Recovery, thankfully, so I tried the 2nd stock firmware. Same issue.
- Finally, I tried the rooting process again, hoping to get it to boot, same thing. So, I tried the 2nd stock firmware again, praying something good would happen, and still stuck on the Samsung screen.
I can still boot into Odin and recovery, but I have no idea where to go from here. I still want it rooted if possible, and I'd prefer not to lose all my games and such. I just found "[ROOT][RECOVERY] [ALL IN ONE] Cf-Autoroot-twrp-T800-T805-T-700-T705" thread here, but I didn't want to try it just yet.
It's a SM-T800. I had Lollipop on it. Don't know much else to add, but please help!
Thanks all.
Click to expand...
Click to collapse
Well... you said you just updated to lollipop, but in order to not stay stuck at splash screen, you have to factory reset. I saw that you don't want to lose your games and such so you probably only have one option. That option is to flash twrp and make a nandroid of your data. Simply boot into download mode, download the twrp .tar http://twrp.me/devices/samsunggalaxytabs105.html
And now go into Odin, untick autoreboot, now hit the pda/AP button and pick the twrp tar. Hit start and let it do its thing. Now after its done flashing, your gonna have to force reboot. Simply hold power+volume up and down+home button all at the same time. Wait a bit and when the screen turns black, quickly press power+volume up+ home buttons all at the same time and it should boot into twrp.
Now in twrp, hit backup and hit backup data. Hopefully that should save your apps installed. Now after its done, go into wipe and silde factory reset. It should remove installed apps from Google play store and it won't remove pictures and such. It just removes the apps you installed. Then now reboot and wait....
Hopefully this helped
-DUHA
As said you will have to factory reset, this will wipe data and cache.
You can use the link you posted above to install TWRP and root.
http://forum.xda-developers.com/galaxy-tab-s/development/root-cf-autoroot-twrp-t800-t3079488
Lollipop changes the data partition so even if you back it up and then restore it with twrp In kitkat it likely won't boot afterwards.
All you can do is wipe it and take the hit.
Alright, I have TWRP running. The size of my "data" is just over 16 gig, and my space on the sdcard is 14.9 gig, so I've been trying to delete data to knock it down. I still have 1.3 gig to go. Everything I'm deleting, in the data folder, is barely making an impact.
I see what you're saying that I probably won't be able to restore it and have it work, but I still will try. I can always factory reset it again later. Once I wipe it, though, and update back to lollipop, couldn't I restore that data backup?
I gotta take a break and knock out some real work, lol, then I'll continue, and update here. If nothing else, maybe it'll help some other poor soul like me in the future!
Once I have it booting all the way again, do I just use TWRP to install SuperSU and it's rooted? Thanks again. I appreciate it!
Not sure what youre trying to do here. Just wipe the data partition with twrp,
Sent from my SM-T805 using XDA Free mobile app
Ashyx, I was just trying to save my game data, while ending up with a rooted tab. And you were right, of course! I tried to restore the back up to no avail, haha....well, I wiped it again, and it booted up just fine, and it is rooted to boot. I can't believe it was that easy with TWRP to root it.
I'm betting this isn't going to work out, but is there anyway to extract my game data from that backup I made, and transfer just that back to my tablet? If it is possible, it'll probably be beyond my ability, I bet, but I'm just curious.
One other question. With TWRP, can I get Lollipop back on it? Or do I need something else on it first?
Now, it's off to figure out how to get my Impulse Controller to work with it so I can play my games with it!
Thanks for helping me out, regardless. I truly thought I had bricked my $600 tablet. My wife would've killed me for wasting that much money, lol!
There is an app called nandroid manager that will allow you to extract data from nandroids, you could extract your game data with that.
The better way would be to make a system and data backup of your current system, reflash lollipop then restore your lollipop data backup. Then back up your game data with titanium backup.
Restore your kitkat backup then restore your game data with tb.

[Q] I have a sem-complicated soft bricking problem

So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Well, then I wanted to get a custom ROM, so I flashed the Cyanogenmod 12, along with the component with it.
I found I didn't like it compared to my 5.0.2 Lolipop, and so I tried finding the stock ROM.
The gator download site everyone was showing refused to let me download anything, and just about all the ROMS seemed like they were from countries other than the U.S.
I searched for awhile, found nothing, then found a ROM called the Ironman Lolipop ROM, it was close enough to stock, so I flashed it.
Suddenly everything was normal, but then supersu needed binaries again, and after I flashed it again, it just stopped asking if it should grant permission, making the root useless.
Frustrated, I looked online again for ROMS, found a Canada one, decided to download, it would take two hours.
Well I'm not from Canada so I doubted it would work, and didn't want to wait two hours.
I decided to Flash back the Cyanogen.
Well unfortunately I went in and found out that I had deleted it earlier, whoops. And so my data wipe brought me back to Ironman ROM.
So, thinking that flashing to Iron Man screwed up my root I tried to re-root with Odin, the same way as the first.
It then had trouble booting, and when it did, it hung at the Samsung logo.
Now I've been stuck on this logo for about an hour, I can't turn it off. I'm assuming the only way to is to wait for it to run out of power.
I have been using TWRP this whole time.
I twice have backed up, and wiped data.
When I hit restore I saw no backups though, I'm not sure if they were for the ROM?
I don't know, I only have a year of experience.
Edit: I have an 8.1" T700 from Amazon.
pennylessz said:
So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Bla bla ......
Click to expand...
Click to collapse
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download): https://www.androidfilehost.com/?fid=24052804347761130
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
DUHAsianSKILLZ said:
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download):
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
Click to expand...
Click to collapse
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
pennylessz said:
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
Click to expand...
Click to collapse
In my files app, look for an folder called TWRP. Your backups are in there. To root simply install twrp and follow the twrp method to root. http://forum.xda-developers.com/showthread.php?p=59638836
You can delete your backups from within twrp. Just select restore, then the backup, then delete.

[Q] Root Issues - Are these known? Are there fixes?

I purchased my Pixel 2 XL from the Google store. I had just upgraded to the 8.1 OTA a few days before when i came across this video and used it to root my phone:
https://youtu.be/nFD9sa-WdUM
Here's the basic steps i took:
Unlock dev options and turn on OEM Unlocking
Boot to stock recovery
Go to his highonandroid site and download TWRP 3.1.1 beta2 (img and zip), an outdated fastboot.zip, magisk 14.5, and the USB drivers which i didnt download because my computer is already recognizing my device just fine.
Extract the fastboot files to a new folder and copy the twrp img file to the fastboot folder.
In CMD, unlock the bootloader with fastboot and reboot phone.
Connect phone as storage device, copy over twrp zip file and magisk 14.5 zip files to root folder on the phone, reboot into recovery
Use fastboot to boot the twrp image that we copied to fastboot folder to get into twrp
Unhook the USB cable, set TWRP to read only, install TWRP, hit home button, then install Magisk and reboot
Once booted up, get into Magisk, download proprietary software, run checks and done.
Once this was done, my fingerprint scanner and wifi no longer worked. I could turn wifi on but it would never find anything. I also received the error when rebooting the phone that says "There's an internal problem with your device. Contact your manufacturer for details." When this message is on the screen, if i dont touch the phone and the screen times out, it flickers really bad and never actually shuts off until i unlock it and hit the OK button.
So i decided to give it another go and ran into some big issues. I figured that i used 8.0 instructions on 8.1 and there was enough things different that it caused problems, so i used this link to reroot:
https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
I went through the first 10-15 pages and the last 10-15 pages and did some searches on the thread and never found any of my issues, but found that a lot of people used different sets of steps and pretty much everything was successful as long as you didnt miss anything and used the most updated stuff. So i did, i went to googles website and downloaded the newest SDK with fastboot, adb, and all that good stuff, as well as the newest 8.1 image (there was a newer version but it had a carrier label on it so i didnt get that one), and the newest magisk and twrp.
I flashed 8.1 and the phone wouldnt boot, nor would it get into TWRP anymore, so i had to use fastboot to boot the twrp image and reinstall the recovery and magisk but it still wouldnt boot. I ran through several different steps and eventually got it to boot up with recovery working. Its the newest 8.1 image, the newest magisk, and the newest twrp, and since then magisk has updated a couple times.
Now on to my issues!
I still get the "Internal problem" popup when booting
I get a lot more random reboots
Sometimes random things just wont work, like streaming plex to my tv or loading an app or something on an app and i have to reboot and it works fine
I've seen numerous times that the "Internal problem" thing is just a mismatch between the system and vendor build.prop files. I dont know what exactly is mismatching between the two but i've tried reflashing them and all sorts of things and nothing ever fixes it.
Does anyone know if there's a fix to any of these three issues, or if maybe looking at my steps i clearly did something wrong? I'm willing to do the whole thing over again if there's a good suggestion, but once i flashed the 8.1 image and went that route, i rerooted successfully 4 times total before i quit doing it again just because of that internal problem popup, i kept figuring something went wrong or i did something wrong. I had no security or anything set before rooting or flashing or anything, and each time i reflashed the operating system, but when i flashed the OS, i had to extract the system file because i would constantly get an error that it was too big and it failed to truncate it, so i've always had to manually install it by first copying it to my phone and installing it through TWRP. Its been an adventure, but these problems suck!
PMad said:
...Its been an adventure, but these problems suck!
Click to expand...
Click to collapse
It's called training. For the error, you just need to fastboot flash the stock dtbo.img. This was fixed on the 15.1 version of Magisk so you shouldn't have that problem anymore. I can tell you that rooted, kernel and a few root apps and I have never had ANY random reboots, so one of your apps is causing it or you didn't start from a completely blank slate. Run your phone in Safe Mode for a while to see if you stop the reboots 100%. If so, one of your apps is the cause. If you still get reboots in Safe Mode, you're gonna need to re-install. I suggest using the instructions on the Google web page where you got the full image. (and try to distill your posts down a little, ffs)
v12xke said:
It's called training.
Click to expand...
Click to collapse
Every new phone is a new adventure, they are all the same but unique at the same time!
v12xke said:
For the error, you just need to fastboot flash the stock dtbo.img.
Click to expand...
Click to collapse
I'll give this a shot! Thank you!
v12xke said:
This was fixed on the 15.1 version of Magisk so you shouldn't have that problem anymore.
Click to expand...
Click to collapse
15.1 is the version i'm on now but nothing has changed. Which issue was this supposed to fix?
v12xke said:
I can tell you that rooted, kernel and a few root apps and I have never had ANY random reboots, so one of your apps is causing it or you didn't start from a completely blank slate.
Click to expand...
Click to collapse
My concern here is that my settings and apps are literally exactly the same as before root, except for magisk, its my only new app, which would lead me to believe that something Magisk is changing is causing the problem, or something else is happening that i'm not realizing yet.
v12xke said:
Run your phone in Safe Mode for a while to see if you stop the reboots 100%. If so, one of your apps is the cause. If you still get reboots in Safe Mode, you're gonna need to re-install. I suggest using the instructions on the Google web page where you got the full image.
Click to expand...
Click to collapse
The reboots are typically 1 reboot every 1 to 3 days, so its not a terrible issue but its happening and it shouldnt. For flashing the OS, after the first failure when trying to install it, those are the only instructions i've used, but i get that error when trying to install the OS that says something about how it failed to truncate the system.img file and so it wasnt installed, so my work around was to copy the file to the phones root folder, install the 8.1 image then immediately go and manually install the system.img file in twrp since its the only thing that fails, but i still have issues. What is this truncate issue?
v12xke said:
(and try to distill your posts down a little, ffs)
Click to expand...
Click to collapse
I agree! hahaha i just wanted to be clear and include all the details, otherwise everyone would have asked me question after question that i could have just included. It ends up being long, a lot happened!
I'll give that dtbo.img a shot and see what that clears up, then if there's issues with rebooting still i'll try safe mode for a few days and see what that does.
Thank you v12xke! (how do you pronounce that? haha)
PMad said:
...I'll give that dtbo.img a shot and see what that clears up, then if there's issues with rebooting still i'll try safe mode for a few days and see what that does.
Thank you v12xke! (how do you pronounce that? haha)
Click to expand...
Click to collapse
Your dtbo.img got patched by Magisk somewhere along the line and that is why the OS is throwing the error. Extract that img file from the full Google image and fastboot flash it, and the error will go away. There is a long thread around HERE on random reboots you should read. The v12xke is a car (Jaguar E-Type) I once owned.
v12xke said:
Your dtbo.img got patched by Magisk somewhere along the line and that is why the OS is throwing the error. Extract that img file from the full Google image and fastboot flash it, and the error will go away. There is a long thread around HERE on random reboots you should read. The v12xke is a car (Jaguar E-Type) I once owned.
Click to expand...
Click to collapse
So i just tried to do this and ran into one of the issues i had when originally trying to root it... I get into TWRP and it will not take any button presses, like the touch screen has become a screen (minus the touch). Is there a fix for this or do i just need to install TWRP before i use it each time it does this?
PMad said:
So i just tried to do this and ran into one of the issues i had when originally trying to root it... I get into TWRP and it will not take any button presses, like the touch screen has become a screen (minus the touch). Is there a fix for this or do i just need to install TWRP before i use it each time it does this?
Click to expand...
Click to collapse
1. You don't use TWRP to flash dtbo.img, you fastboot it while the phone is in bootloader mode.
2. TWRP works just fine if you install it and leave it installed. Make sure you are using 3.2.1-0 (img and zip).
v12xke said:
1. You don't use TWRP to flash dtbo.img, you fastboot it while the phone is in bootloader mode.
2. TWRP works just fine if you install it and leave it installed. Make sure you are using 3.2.1-0 (img and zip).
Click to expand...
Click to collapse
I was getting into TWRP to create a backup of everything and it popped up asking for my password, and i remembered reading that we have to get rid of all of our security before making a backup, so i tried to hit buttons to cancel it and nothing worked, i had to hold the power button. So i eliminated all of my security and went back thinking it was a 1 time issue but it happened again, it took me straight to the main menu but nothing would work. I'm using 3.2.1-0 like you mentioned and i cant press any buttons. I'd like to back everything up before flashing this or anything else.
PMad said:
I was getting into TWRP to create a backup of everything and it popped up asking for my password, and i remembered reading that we have to get rid of all of our security before making a backup, so i tried to hit buttons to cancel it and nothing worked, i had to hold the power button. So i eliminated all of my security and went back thinking it was a 1 time issue but it happened again, it took me straight to the main menu but nothing would work. I'm using 3.2.1-0 like you mentioned and i cant press any buttons. I'd like to back everything up before flashing this or anything else.
Click to expand...
Click to collapse
You don't need a backup before re-flashing the STOCK dtbo (or boot) partitions, haha. READ UP.

Categories

Resources