Related
Hello all. I'm TK, newb who has been lurking for a while. The forum has led me to some awesome changes with my Evo, but that may be catching up with me. I'm still rooted and running CM 7 with SZ 1.01, and none of my computers are able to recognize the USB drive on my phone, regardless of which cable I use.
I can't get ADB to work on my PC, so I'm not able to perform any commands for the phone.
Can anyone help me with this issue? It would be much appreciated. Thanks!
Do you have debugging(in application settings) on when trying to use adb? What about allow mock locations? Try turning debugging off and then turn it back on(while plugged in USB). If that doesn't work you could always go to recovery mode and enable USB toggle and get it connected that way. Also make sure you're actually pulling down the notification bar and selecting "mount".
Sent from my PC36100 using Tapatalk
CrucialTK said:
Hello all. I'm TK, newb who has been lurking for a while. The forum has led me to some awesome changes with my Evo, but that may be catching up with me. I'm still rooted and running CM 7 with SZ 1.01, and none of my computers are able to recognize the USB drive on my phone, regardless of which cable I use.
I can't get ADB to work on my PC, so I'm not able to perform any commands for the phone.
Can anyone help me with this issue? It would be much appreciated. Thanks!
Click to expand...
Click to collapse
Does your phone get recognized at all on your computer when you plug it in? If not you may have a hardware problem -> usb port is loose.
On my original cord that came with the phone I had to trim off about 2 centimeters off of the plastic to go in far enough to have my Toshiba laptop to read it. I have had to do the same thing to several cords since. Maybe your usb?
alexisprz said:
Does your phone get recognized at all on your computer when you plug it in? If not you may have a hardware problem -> usb port is loose.
Click to expand...
Click to collapse
Yes, my computer just says that it doesn't recognize the hardware. it charges just fine by the computer.
I'm running ClockworkMod for my recovery, I'll check for USB Toggle there.
No joy on finding USB Toggle.
It's called something different. Can't remember but it's there, I believe. I've only been in Clockwork recovery like once.
Hopefully you guys can help me out. I'm suddenly having issues with my phone not being detected by my PCs when it is connected via USB.
When i plug my phone into my PC, i receive the error message: "UBS Device not Recognized One of the USB devices attached to this computer has malfunctioned, and windowes does not recognize it." from my Windows XP PC. My Windows 7 PC is unable to recognize the device plugged in.
The strange thing is that even though my phone is not being recognized by the PCs, the phone will still charge.
The phone is not in USB Debugging Mode, and I've gone ahead and flashed 2 separate Kernals on my phone, but i still am having this issue. I have tested this out with 3 USB cables, on 3 separate computers (Work (win xp), Home (win7), and friends(win7)).
2 Days ago the USB worked fine for me as i was able to flash Franco Kernal and JB onto my Gnex, but suddenly it's not being recognized by my computer anymore.
Stumped.....Hoping that this isn't a hardware issue and something that i can fix without having any downtime away from my phone.
Any thoughts?
Try other USB port and other USB cable.
Sounds like you're missing some drivers... Remove the device completely in Device Manager & plug it again. For MTP, Windows 7 should find the drivers online by itself. If you need fastboot access, you'll have to download the seperate drivers for that. I'd recommend the GNex Toolkit in that case since it comes with the drivers included (you'll still need to install them of course )
Gunthy` said:
Sounds like you're missing some drivers... Remove the device completely in Device Manager & plug it again. For MTP, Windows 7 should find the drivers online by itself. If you need fastboot access, you'll have to download the seperate drivers for that. I'd recommend the GNex Toolkit in that case since it comes with the drivers included (you'll still need to install them of course )
Click to expand...
Click to collapse
Thx for the reply,
Yes, I have been using the GNEX tool kit, though not the 7.3 version that was released today. The 7.2 version was being used at home and on my work PC. I usually install the drivers from the toolkit then plug my phone in when done. The drivers have been recognizing my phone but not since 2 days go.
I'm currently trying to find the MTP checkbox in the phone Settings to double check if it's checked, but im having problems locating it.
thepce said:
I'm currently trying to find the MTP checkbox in the phone Settings to double check if it's checked, but im having problems locating it.
Click to expand...
Click to collapse
Go to Settings > Storage > tap top right menu to display USB computer connection option & tap it
Gunthy` said:
Go to Settings > Storage > tap top right menu to display USB computer connection option & tap it
Click to expand...
Click to collapse
Ah yes, that is where it was hiding....But unfortunately the checkbox is checked.
This seems like a hardware issue, but I'm not certain since the phone still recharges when plugged in
thepce said:
Ah yes, that is where it was hiding....But unfortunately the checkbox is checked.
This seems like a hardware issue, but I'm not certain since the phone still recharges when plugged in
Click to expand...
Click to collapse
Could be... Charging doesn't necessary have anything to do with data transfer AFAIK... Do you see something in the Device Manager when you plug it? You might have to right click & do a re-scan to force detection.
Gunthy` said:
Could be... Charging doesn't necessary have anything to do with data transfer AFAIK... Do you see something in the Device Manager when you plug it? You might have to right click & do a re-scan to force detection.
Click to expand...
Click to collapse
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
thepce said:
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Click to expand...
Click to collapse
You get that when the phone is running normally? I think for me that one only shows up when I put it in bootloader mode. In MTP mode it's just a media device like any other AFAIK... I'll check tomorrow when I'm back on my Windows laptop to be sure . Have you tried putting it in PTP mode? If so do you see the device as a camera or is it the same issue?
thepce said:
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
Click to expand...
Click to collapse
Sounds like a software bug, but I'll admit it is a bit strange considering your main issue...
Hello i have a question too on Usb subject. forgive me for go off topic over here is there anyway to get my music be playing in the car radio tru usb with my first google phone it worked like a charm model Htc google nexus one just plugged it in en voila music came out..but with the gnex won,t work thanks in advanced
thepce said:
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
Click to expand...
Click to collapse
Google galaxy nexus nfc battery. either the battery or the port is shot. People having issues.
And get your drivers from Samsung and Android sdk. Qbking77 has a YouTube video on how to set it up.
Android is upgrading...
Lizard78 said:
Hello i have a question too on Usb subject. forgive me for go off topic over here is there anyway to get my music be playing in the car radio tru usb with my first google phone it worked like a charm model Htc google nexus one just plugged it in en voila music came out..but with the gnex won,t work thanks in advanced
Click to expand...
Click to collapse
Basically the way the Nexus One talked to other systems through USB is completely different from the way the Galaxy Nexus does. The GN uses a new protocol called MTP. Your car stereo probably can't read the files on your phone because it doesn't have MTP support.
Phantom Charging Issue
So I've gone ahead and Fiddled around with my phone for the past day trying to fix my USB issue, and I've discovered that this issue may not be due to USB issues.
Throughout the day when i was playing around and trying to fix my USB recognizing issue, it miraculously started working again. Now I am able to connect to my PCs and transfer the desired files.
Upon this issue being resolved, i noticed that periodically the screen would turn on, on it's own while being off in the locked state. I observed this issue to see what may be causing this, and it is turning on due to my phone thinking that i plugged my micro USB cable in to charge it. The charging indicator on the batter flips on, and even the USB Debugger / MTP Notification is present in the notification drawer.
Apparently this is a known issue with the Battery or charging port with Gnex's. (See below the 2 youtube clips for more details for problem/fix.)
https://www.youtube.com/watch?v=47PIdXf25X0
https://www.youtube.com/watch?v=KD6yYLnO6ig
I believe my warranty is void since this phone was purchased in a different country and has had the bootload locked/unlocked a million times. Anyone else have this problem that they have been able to fix manually? Or am I going to have to cross my fingers, ship my phone to get it fixed, and hope the post man doesn't f**k up?
Delete
I have a Samsung Galaxy Nexus. It is had some water damage in the past (making it near impossible to get repaired under warranty) and that has caused it to act funny. Funny = Powering off at random times and rebooting itself/causing the buttons to act silly. Recently it did the thing where it powered off and now it won't come back on. I know the power button still works and it is charging because when I plug it in the charging symbol pops up when I press the power button. However it won't power on. I plug it in to my laptop and it charges but my laptop does not recognize it is plugged in. Is there any sort of program I can download that will allow me to get into my phone or anything I can do? Also I have tried the Power and Volume buttons to try and power it into Bootloader mode but that does not work either. Neither does pulling the battery or putting a different battery in or using a different charger.
Isnt it clear it is dead? Electric stuff+water=death. (Physics 101)
Sent from my Nexus 4 using xda premium
So your galaxy nexus turned into a Nexus 4? Or is there another reason you're in this forum?
Rude
Why are you people so mean? I am looking for help, really just a program that would allow me to plug my dead phone into the computer (since it indicates it is charging) and allows me to get files off of it. That would be nice.
Help
lanceamiillion said:
Why are you people so mean? I am looking for help, really just a program that would allow me to plug my dead phone into the computer (since it indicates it is charging) and allows me to get files off of it. That would be nice.
Click to expand...
Click to collapse
Hey man,
I'm not sure if your gnex is salvageable, but if when you plug it into your laptop it indicates charging perhaps you may be able to get to your data. First question...do you have usb debugging enabled in settings? We have to get your laptop to recognize the phone as a drive,then try to grab the files. Tell me more about what happens when you connect it. We aren't all mean, some here just forget how it was when they had nothing but questions and no answers. Most in the forums are very helpful, regardless of experience level.
U need a jig
Sent from my Galaxy Nexus using xda premium
Thanks
JFay22 said:
Hey man,
I'm not sure if your gnex is salvageable, but if when you plug it into your laptop it indicates charging perhaps you may be able to get to your data. First question...do you have usb debugging enabled in settings? We have to get your laptop to recognize the phone as a drive,then try to grab the files. Tell me more about what happens when you connect it. We aren't all mean, some here just forget how it was when they had nothing but questions and no answers. Most in the forums are very helpful, regardless of experience level.
Click to expand...
Click to collapse
Thanks for your civil post, I will try my best to inform you more on what my phone is doing.
When I plug it into the laptop it does indicate it is charging but that is the only sign of life I can get out of it. After reading a little bit more on the issue I figure might be the power button that is the issue since it is running JellyBean. One solution that I have tried that has yielded interesting results is plugging the phone into the laptop via USB without the battery in the phone. My computer then makes the "beeping" sound like it is connecting to it and then "beeps" again like it can't connect.
I can't post a link but if you google katzz ifixit then you can go to the website I went to that described the issue and gave the solution I just described. Katzz is the name of the user who posted the solution.
I'm pretty sure I have USB debugging enabled in the settings because before my phone stopped responding I plugged it into the computer a lot to transfer files.
Is there any sort of program that would allow me to turn on my phone from my computer even though I can't seem to get my computer to recognize my phone?
Hi all, I've been lurking the forums since bout September of 2012. I haven't really been posting here, mainly just gathering ROMs, kernels, help etc.
Anyways, my Nexus 7 isn't being recognized by Windows 8, Windows 7, Windows Vista, or even Ubuntu. this leads me to belive this is caused from the tablet. I have installed numerous drivers, but with no luck. Recently, I noticed when I boot into recovery, and the tavlet uis on the Google screen, my computer recognizes it as, "Unknown Device." Soon after it passes the Google screen and boots into TWRP Windows can't detect it anymore. My tablet says it's connected via AC, not USB - which is probably why I can't transfer files. I have MTP checked, and I tried PTP too. I've tried enabling and disabling debugging with no luck still. I'm using the OEM charger for the device, and I have tried using multiple cable with no dice.
"So a new possible way of fixing this after having contacted Asus support. They had me turn of my Nexus 7 and then hold the Volume Up + Power button for 30 seconds and then hold only the power button for 60 seconds. I was told this is to remove static from the mother board. USB Charging, USB Transfer, and Wireless Charging (which is what made me notice the issue) now work. The only problem I have now is that the cord that came with the tablet seems to be a bit loose and will cause it to stop charging when I don't just let it sit on a table."
That was suggested on a different forum, but that didn't work for me neither.
ADB nor fastboot cannot see my device as well.
Any help?
have you tried plugging the cable in to a different usb port?
What drivers are you using? Try the generic USB ones here, which I use with no problem at all: http://developer.android.com/sdk/win-usb.html
For best results, go to Device Manager first, set it to show all hidden devices, then delete (not just disable) any previous drivers you may have installed.
"They had me turn of my Nexus 7 and then hold the Volume Up + Power button for 30 seconds and then hold only the power button for 60 seconds. I was told this is to remove static from the mother board."
I feel like hitting my head against a brick wall when hearing such advice.
timrock said:
have you tried plugging the cable in to a different usb port?
Click to expand...
Click to collapse
Yes, I've tried USB 3 ports, and USB 2 ports with no success.
Pandae said:
What drivers are you using? Try the generic USB ones here, which I use with no problem at all: -snip-
For best results, go to Device Manager first, set it to show all hidden devices, then delete (not just disable) any previous drivers you may have installed.
"They had me turn of my Nexus 7 and then hold the Volume Up + Power button for 30 seconds and then hold only the power button for 60 seconds. I was told this is to remove static from the mother board."
I feel like hitting my head against a brick wall when hearing such advice.
Click to expand...
Click to collapse
Gotta love Asus' tech support.
Try Nexus Root Toolkit, it has a nice walkthrough that shos you how to first uninstall any existing non-working usb drivers. Then just try its options one by one and you'll have working drivers in minutes.
I gave up even trying to get my original N7 and my N7 (2013) to be recognized by any PC. What I do instead is use a free app of the day I got from Amazon a while back called Wifi File Explorer. Run the app and you can access the file system from your PC. Upload, move, copy and create folders.
It's worked for me for a while now. I'm sure there are other free apps that will do the same.
[MOBILE] Nexus 7 (2013)
VertzxD said:
Yes, I've tried USB 3 ports, and USB 2 ports with no success.
Click to expand...
Click to collapse
Have you also tried usb ports on the back of the PC? Those are directly on the motherboard, whereas usb ports on the front of a PC are almost always via a usb hub connected to the MB. I know of instances where this makes a substantial difference (device being recongnized or not). You might try it (if you haven't already).
Edit : also try disabling AV software and possibly firewall. But admitedly I have personally never had any issues regarding device not recognized due to this.
This was my solution.
Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.
VasVadum said:
Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.
Click to expand...
Click to collapse
First off, after the factory reset and everything worked did you reinstall the pdanet?
Second, 20,000mah battery? Holy cow im jealous!
Forgive me if you have already tried these things but this is what i would do...
Did you reenable developer options and reenable adb debugging?
Did you uninstall and reinstall your phone drivers?
Is there an updated phone driver?
Have you tried a different usb cord?
Is there excess dirt or dust in usb charge port on your phone?
Does your usb charge port even work anymore or do you just charge external battery on wall?
Have you tried a different usb port on the computer?
Have you tried on another computer?
Have you tried updating computer drivers?
Have you enabled a fast charge tweak like on a kernel tweak app?
If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Let me know what worked please! Good luck!
ZipAddict said:
1. First off, after the factory reset and everything worked did you reinstall the pdanet?
2. Second, 20,000mah battery? Holy cow im jealous!
3. Did you reenable developer options and reenable adb debugging?
4. Did you uninstall and reinstall your phone drivers?
5. Is there an updated phone driver?
6. Have you tried a different usb cord?
7. Is there excess dirt or dust in usb charge port on your phone?
8. Does your usb charge port even work anymore or do you just charge external battery on wall?
9. Have you tried a different usb port on the computer?
10. Have you tried on another computer?
11. Have you tried updating computer drivers?
12. Have you enabled a fast charge tweak like on a kernel tweak app?
13. If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Click to expand...
Click to collapse
1. No, I never touched PDA net again.
2. Too bad forum rules say I can't be friendly and give you the link to it.
3. Read the topic you quoted. I did, only after my phone broke again. Except it's not adb debugging, it's USB debugging. Doesn't work, because the phone can't communicate with a computer anymore.
4. 5. 11. Yes I reinstalled drivers and no there were no updates.
6. 7. Nothing's wrong with the cable. I did try with others.
8. What does that even mean? Yes my phone's port works. Nothing's wrong with any hardware.
9. 10. I've tried different ports and different computers.
12. Can't, phone isn't rooted.
13. I'm not using this. My phone is not there for Google/Android to tell me I'm not allowed to use my USB port ever again. I'm also not going to wait 4 hours for a 4 GB file to transfer via my router to my computer nor am I installing some app software to my computer just to have wireless transfer. This is not a work around. This is an "Oh well, it's broken, guess you can't ever use USB ports again for data access!"
note; I tried all of these (except 12/13) before I ever came here looking for help.
2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck
ZipAddict said:
2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck
Click to expand...
Click to collapse
2. amazon dot com /External-20000mAh-Limefuel-LP200X-Flashlight/dp/B00OHZVN5U/ - It let me charge my phone 7-8 times fully before it was empty. Automatically stops when your phone is full.
3. USB debugging doesn't need to be on in order for a phone to communicate with a computer. This is only if you want to debug apps or use other developer tools. File transfer works just fine without it.
8. I still don't understand what you mean. My phone is not broken in any way. Nor is my battery. My external battery charges off any USB input, my phone charges off any USB input. My phone just can't communicate data wise between devices anymore via USB.
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off. All "kernal tweak apps" appear to require root. The top 5 google searches shown this.
3. Wasnt sure. Ive always had it on
8. Some aftermarket batteries dont charge while in phone hooked up to charger. They come out of phone and into specialized charger for battery only not phone with it, so that it can charge the larger battery in a matter ofan hour or so is what i have been trying to say. But its obvious thats not the case for you now since i asked and clarified. If this was the case one might not know that the small usb port on their phone needed cleaning to make a good connection because they literally dont use it to charge their phone. They charge their phone with external battery charger. You see?
12. On my custom rom and on my trickstermod app it does say fast charge disables data communication and that you have to turn it off for computer to recognize phone again. This fast charge mode only works when connected to computer not wall charger it says
Wish i could be more help but im out of ideas. Good luck
Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|
VasVadum said:
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off.
Click to expand...
Click to collapse
this was your problem remember? fast charge does disable data communication.
VasVadum said:
Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|
Click to expand...
Click to collapse
glad whatever you did fixed it lol. have a good day
ZipAddict said:
this was your problem remember? fast charge does disable data communication.
glad whatever you did fixed it lol. have a good day
Click to expand...
Click to collapse
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.
VasVadum said:
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.
Click to expand...
Click to collapse
The way u said it i misunderstood i thought u did have it on. Its not an option on all roms though. Mine has it and i tried it and couldnt see files thru usb until i toggled it off so it was just an idea. I dont know the effects of the low battery dump off top of my head but i will remember that if i hear someone else with same problem. Glad its fixed now