Related
my phone seems to be unrootable. I have tried everything, but I always get a write fail message after hanging at "Setup Connection" in Odin for a few minutes. My phone is recognized by my computer, I am able to drag and drop files to it. When plugged into Odin I am able to see the COM message. My phone does seem to have a hard time connecting to Kies, I believe it only connected to the software once.
Any solutions anyone?
If you're using ODIN, then uninstall Kies. It interferes with ODIN.
Also try switching cables, USB ports, and computers if possible.
NeedHelpNow said:
my phone seems to be unrootable. I have tried everything, but I always get a write fail message after hanging at "Setup Connection" in Odin for a few minutes. My phone is recognized by my computer, I am able to drag and drop files to it. When plugged into Odin I am able to see the COM message. My phone does seem to have a hard time connecting to Kies, I believe it only connected to the software once.
Any solutions anyone?
Click to expand...
Click to collapse
You can check HERE for more info on how to accomplish what you want to do. You can also use the S3 TOOLKIT. Lastly when in doubt you can check out THIS thread. If all else fails there's always THIS method .
Tried your suggestions already
prboy1969 said:
You can check HERE for more info on how to accomplish what you want to do. You can also use the S3 TOOLKIT. Lastly when in doubt you can check out THIS thread. If all else fails there's always THIS method .
Click to expand...
Click to collapse
Yeah did everything you listed, except for the toolkit. One thing I am noticing when I have my phone in download mode and it is plugged into the computer it registers as MSM8960, which from my search on google seems to be a chipset.
Thanks for the reply CNexus and prboy1969
Im curios to know if you unistalled the drivers and installed them again.
Sent from my SPH-L710 using xda premium
http://forum.xda-developers.com/showthread.php?t=1963812
Have you tired throwing it out a 3rd floor window. I heard that works.
http://i1202.photobucket.com/albums/bb374/TexasEpic/ThePeoplesROM-KennyGlass123/daniel4653.png
NeedHelpNow said:
Yeah did everything you listed, except for the toolkit. One thing I am noticing when I have my phone in download mode and it is plugged into the computer it registers as MSM8960, which from my search on google seems to be a chipset.
Thanks for the reply CNexus and prboy1969
Click to expand...
Click to collapse
One thing I would check is your USB mode may be set to debug. Look for the S3 dialer codes and find the one that changes the USB mode and switch it to PDA (I believe). If its on modem/debug or whatever else it may be the cause.
*EDIT: I think this may be why it shows up a MSM8960. I just tested my sprint S3 in odin mode and it shows up as "Samsung Mobile USB CDC Composite Device"
I would also suggest running the connection troubleshooter in KIES which re-installs the drivers. In my experiences KIES does not cause a conflict with ODIN (I've had both installed with no issues during my time with the S2 and S3).
Finally, reboot both the phone & PC, and try again. If it still fails swap out your USB cable.
rocket321 said:
One thing I would check is your USB mode may be set to debug. Look for the S3 dialer codes and find the one that changes the USB mode and switch it to PDA (I believe). If its on modem/debug or whatever else it may be the cause.
*EDIT: I think this may be why it shows up a MSM8960. I just tested my sprint S3 in odin mode and it shows up as "Samsung Mobile USB CDC Composite Device"
I would also suggest running the connection troubleshooter in KIES which re-installs the drivers. In my experiences KIES does not cause a conflict with ODIN (I've had both installed with no issues during my time with the S2 and S3).
Finally, reboot both the phone & PC, and try again. If it still fails swap out your USB cable.
Click to expand...
Click to collapse
In the past on older phones when I used a desktop the front usb ports wouldn't work had to use the back usbs. Try a different port?
Sent from my blue galaxy
You're in download mode and you've flashed the custom recovery right? Do a Google search of "how to root sprint Galaxy s3 androidcentral" and obviously click the one that says androidcentral
Sent from my SPH-L710 using xda app-developers app
---------- Post added at 01:36 AM ---------- Previous post was at 01:32 AM ----------
Here's a link instead -
http://forums.androidcentral.com/sp...e-updated-how-root-your-sprint-galaxy-s3.html
Sent from my SPH-L710 using xda app-developers app
Follow whatever guide your using for how to use Odin.
Ie: just put the md5 file where its says PDA..
Put your phone in download mode..
Pull battery.. Put back.. Hold vol.down home and power..
Then at prompt push vol.up.
Phone will show I'm download mode.
The file.I would push is twrp.
The 2.5.0.0 works well on most all I do.
Once you have your custom recovery to install
Zips your good to go..
Just push the recovery and reboot the phone back into
The recovery mode..you shouldnt get errors.. I would say
To make sure your using a newer version of Odin and if you've
Messed with drivers always reboot PC.!!
Volume up.. Home and power this time..
And Go to recovery and flash whatever rooted ROM you want.
I'm good on computer anatomy and the ones in the back are usually fast, they are directly on the mobo
Sent from my SPH-L710 using xda app-developers app
Team DevDigitel said:
Follow whatever guide your using for how to use Odin.
Ie: just put the md5 file where its says PDA..
Put your phone in download mode..
Pull battery.. Put back.. Hold vol.down home and power..
Then at prompt push vol.up.
Phone will show I'm download mode.
The file.I would push is twrp.
The 2.5.0.0 works well on most all I do.
Once you have your custom recovery to install
Zips your good to go..
Just push the recovery and reboot the phone back into
The recovery mode..you shouldnt get errors.. I would say
To make sure your using a newer version of Odin and if you've
Messed with drivers always reboot PC.!!
Volume up.. Home and power this time..
And Go to recovery and flash whatever rooted ROM you want.
Click to expand...
Click to collapse
I have done everything you listed. Here is a question for you. When your phone is in download mode and you plug it in to the computer, what does it register as under Device & printers. I stated this before, but when I plug my phone in, it comes up as MSM8960. I did the S3 dialer code thing and all looks good, the phone is set to PDA and Qualcomm USB Settings are set to MTP+ADB (Thanks rocket321 for your assistance on that.)
Have you tried this method. It never fails comes with video and everything
http://qbking77.com/how-to-root/root-samsung-galaxy-s-iii/
Transmitted with a portable device using Xparent Blue Tapatalk 2
Tried that
edfunkycold said:
Have you tried this method. It never fails comes with video and everything
http://qbking77.com/how-to-root/root-samsung-galaxy-s-iii/
Transmitted with a portable device using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
I tried that tutorial, as a matter a fact that was the first one I used. When I check what drivers are being installed I see "SAMSUNG Mobile USB CDC Composite Device" and "SAMSUNG Mobile USB Modem #3" the #3 I am guessing is the USB port for which I am connected to (This number changes with every port when my device is connected to the computer). Does anyone get the same exact messages when they plug in their phone and drivers began to install? Odin Message below:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-LTE-SGS3-v5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What Operating System is on your Desktop / Laptop?
TEAM MiK
MikROMs Since 3/13/11
NeedHelpNow said:
I tried that tutorial, as a matter a fact that was the first one I used. When I check what drivers are being installed I see "SAMSUNG Mobile USB CDC Composite Device" and "SAMSUNG Mobile USB Modem #3" the #3 I am guessing is the USB port for which I am connected to (This number changes with every port when my device is connected to the computer). Does anyone get the same exact messages when they plug in their phone and drivers began to install? Odin Message below:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-LTE-SGS3-v5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
As everything seems to be going right up until the flash, I might suggest you try flashing a different file.
Try CF-Auto-Root from the 3rd post in this thread: http://forum.xda-developers.com/showthread.php?t=1963812
Make sure you unzip to the .tar.md5 file and try flashing that in the PDA slot in Odin.
If that works you will have stock recovery but rooted ROM. From there you can use Mobile Odin to flash a customer recovery assuming you would like to have CWM or TWRP.
Windows 7
prboy1969 said:
What Operating System is on your Desktop / Laptop?
TEAM MiK
MikROMs Since 3/13/11
Click to expand...
Click to collapse
Windows 7
NeedHelpNow said:
Windows 7
Click to expand...
Click to collapse
So the Samsung drivers do install when you connect the phone to the PC? If that step is OK then have you tried a different USB port and a different USB cable? When Odin fails it is almost always a problem with the USB cable.
I have this same phone and I followed the QBKing77 video with no issues. It worked flawlessly but in the past Odin issues ended up being the USB cable.
NeedHelpNow said:
Windows 7
Click to expand...
Click to collapse
Have you made sure that the drivers are installed as suggested above. Also I'm not sure if I mentioned this. But I've had similar weirdness from using a bad USB Cable.
TEAM MiK
MikROMs Since 3/13/11
PLEASE READ::: THIS IS NOT FOR UNLOCKING BOOTLOADER / ODIN MODE ON BRICKED PHONE. IF ODIN MODE OR DL MODE AIN'T WORKING THEN USE USB JIG (BUY OF RS 106 OR MAKE YOUR OWN). IT IS JUST FOR REPAIRING SOFT BRICKS AT ONE CLICK (UNLIKE ODIN). DL MODE OPENS IN SOFT BRICK. IF IT DOES NOT OPEN THEN IT IS HARD BRICKED. AS TOLD, PLEASE USE USB JIG TO OPEN DL MODE ON HARD BRICKS.
CREDITS::: I am not the creator of this software. Just sharing.. All credits goes to XDA member AdamOutler. But you can still Thanks me on XDA if you if you are thankful to me for sharing with brief & simple instructions
ABOUT LINKS::: I cannot post links (new member) so please copy and paste it to your browser address bar. Hope a mod is reading
So you have rooted your Samsung Android phone flashed ROMs and mods that bricked your phone? You can unbrick it with a utility called ODIN but everybody knows that it is very messy to use Odin. We will not be touching Odin now. We don't even have to download the megabyte consuming firmware packages. This time Samsung users can unbrick a soft brick on their phone at just a click and this method is working and also very safe. Full thanks to XDA member AdamOutler and his thread forum.xda-developers.com/showthread.php?p=15330252
Requirements:
1. A bricked Samsung Android phone (ofcourse)
2. A PC using Linux, Windows or Mac OSX with Java and Samsung USB drivers installed
3. A working USB data cable to connect to PC
4. Most important, Commensense and brain : )
Steps to Do (Instructions)-
I am supposing that you have already Samsung USB drivers installed. If not, download them here 4shared.com/file/UKUCQTOS/SAMSUNG_USB_Driver_for_Mobile_.html. Do restart (cold boot) your PC after installing drivers.
1. Make sure that you have latest version of JAVA installed in your PC. To check if it is installed or to download and install, refer java.com/en/download/installed.jsp
2. Download One Click Unbrick Tool from heimdall-one-click.googlecode.com/files/OneClick.jar to your desktop or in any folder.
3. Connect your phone to your PC using USB.
4. Turn on Odin mode or Download mode on your phone. You still do not need Odin. If you cannot get to Odin mode (vol down+home+power key) it means that either your battery is low than 10% or your phone is hard bricked. Try charging phone for 30 minutes first. If you still cant get to DL mode, use USB jig to get into DL mode (available on eBay for just Rs 100, you can make your own too).
5. For Linux and Mac OSX, double click on the downloaded file OneClick.jar and click on "Unsoft Brick" button and wait for the device to reboot by its own.
For Windows OS, right after step 4, goto the app folder and right click OneClickLoader.exe and choose to Run As Administrator. It is important to run it as administrator on Windows. Click on "Unsoft Brick" button and wait for the device to reboot by its own.
I tried it on my Samsung Galaxy Y, Samsung Galaxy TAB and Samsung Galaxy Grand and it seem to be working like a charm as it fixed its soft brick immediately. Try it
FAQ #1: It is not detecting my phone
---------- What? Are Samsung USB drivers installed correcting in local disk C:\ drive (C:\SAMSUNG\USBDrivers). If yes, uninstall those drivers> reboot> install again> reboot your PC and phone both. If it still does not detect, try another USB port of your computer. Also make sure that you are running this app as an administrator with all priviliges and your USB is working. If Kies, ADB or any other software that communicates with your phone except One Click Unbrick Tool is started, turn them off too via Task Manager. NOT WORKED? Try goto Device Manager (in One Click Unbrick Tool, there is an option for this) and select device as SAMSUNG COMPOSITE DEVICE.
FAQ #2: I get error USB DEVICE NOT RECOGNIZED when I plugged in my device with my USB.
-------- Oh!! I think that your USB cable is malfunctioning. I had the same error (even with GT-S5360 USB). I used LG USB and it did fix that error. If still it gives error, make sure that the drivers are installed correctly (see FAQ #1) and your PC is not in saving mode
FAQ #3: Have I to downliad firmware packages or files too?
-------- No, One Click Unbrick Tool is enough! You do not need any firmware packages.
FAQ #4: What about its working?
-------- It is based on Odin, but not Odin!
(more FAQs soon......................)
have u tested?
i just use a jig to unbrick
yup and its working...
does usb jig fully unbricks and fixes a soft brick on sgy??
i heard dat a usb jig only opens odin mode if we are unable to do that..
Minions_Army said:
have u tested?
i just use a jig to unbrick
Click to expand...
Click to collapse
yup and its working...
does usb jig fully unbricks and fixes a soft brick on sgy??
i heard dat a usb jig only opens odin mode if we are unable to do that..
techmentry said:
yup and its working...
does usb jig fully unbricks and fixes a soft brick on sgy??
i heard dat a usb jig only opens odin mode if we are unable to do that..
Click to expand...
Click to collapse
i ever brick 6 times n cant boot charging icon not showing ...same like phone dont have battery
n i used jig n working
bt thanks for your guide...
once again... dont make double post...just edit first post
Minions_Army said:
i ever brick 6 times n cant boot charging icon not showing ...same like phone dont have battery
n i used jig n working
bt thanks for your guide...
once again... dont make double post...just edit first post
Click to expand...
Click to collapse
sorry ok so soft brick== stuck at boot logo+dl mode opening+phone turns on when plugged charger
so will jig also fixes phone (turns on phone normally and fixes 'stuck on logo')?
techmentry said:
sorry ok so soft brick== stuck at boot logo+dl mode opening+phone turns on when plugged charger
so will jig also fixes phone (turns on phone normally and fixes 'stuck on logo')?
Click to expand...
Click to collapse
no...not softbrick i think
bcoz..when i turn on my phone or recovery mode...bootlogo not showing+ cant enter odin mode+ still off when charging
jig just enter to odin mode
yes i know...this software can make a phone boot normaly
Minions_Army said:
no...not softbrick i think
bcoz..when i turn on my phone or recovery mode...bootlogo not showing+ cant enter odin mode+ still off when charging
jig just enter to odin mode
yes i know...this software can make a phone boot normaly
Click to expand...
Click to collapse
have doubts about jig. cleared... will never need a jig lol..
WHO MISS OLD MILEY ELSE? YES! THIS IS MY QUESTION, NOT SIGNATURE
Can anyone tell me how does it work?
Gửi từ Galaxy Y bằng cách sử dụng tia X truyền từ mặt trời!
datvui2211 said:
Can anyone tell me how does it work?
Gửi từ Galaxy Y bằng cách sử dụng tia X truyền từ mặt trời!
Click to expand...
Click to collapse
Better ask the original developer of software But I can say that it is working
WHO MISS OLD MILEY ELSE? YES! THIS IS MY QUESTION, NOT SIGNATURE
oneclickloader.exe is just showing a flash of cmd screen and then nothing happens.please help
devamrit said:
oneclickloader.exe is just showing a flash of cmd screen and then nothing happens.please help
Click to expand...
Click to collapse
Have u choose it Run As Administrator. I never try this yet so i dont know if it really work or not. If u had soft brick on u phone like stuck at boot just use Odin for better use and freshly back to stock Rom. U can find firmware packages on thishttp://forum.xda-developers.com/showthread.php?t=2568853if u phone is GT-S5360
brother marcuss........you got me killed .....now all i am getting is a white screen even on download mode...:crying:
devamrit said:
brother marcuss........you got me killed .....now all i am getting is a white screen even on download mode...:crying:
Click to expand...
Click to collapse
I think u phone had problem hardware. the only solution is to send u phone to service centre. Btw how u phone got white screen ?
devamrit said:
brother marcuss........you got me killed .....now all i am getting is a white screen even on download mode...:crying:
Click to expand...
Click to collapse
Why @marcussmith2626 ?
Lemon_Lime`s said:
I think u phone had problem hardware. the only solution is to send u phone to service centre. Btw how u phone got white screen ?
Click to expand...
Click to collapse
Hardware problem, indeed.
Sent from my highly pimped Galaxy Pocket.
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876
3. My blog
4. Press the thanks button if I really helped/assisted you.
unbrick gts 5360
techmentry said:
PLEASE READ::: THIS IS NOT FOR UNLOCKING BOOTLOADER / ODIN MODE ON BRICKED PHONE. IF ODIN MODE OR DL MODE AIN'T WORKING THEN USE USB JIG (BUY OF RS 106 OR MAKE YOUR OWN). IT IS JUST FOR REPAIRING SOFT BRICKS AT ONE CLICK (UNLIKE ODIN). DL MODE OPENS IN SOFT BRICK. IF IT DOES NOT OPEN THEN IT IS HARD BRICKED. AS TOLD, PLEASE USE USB JIG TO OPEN DL MODE ON HARD BRICKS.
CREDITS::: I am not the creator of this software. Just sharing.. All credits goes to XDA member AdamOutler. But you can still Thanks me on XDA if you if you are thankful to me for sharing with brief & simple instructions
ABOUT LINKS::: I cannot post links (new member) so please copy and paste it to your browser address bar. Hope a mod is reading
So you have rooted your Samsung Android phone flashed ROMs and mods that bricked your phone? You can unbrick it with a utility called ODIN but everybody knows that it is very messy to use Odin. We will not be touching Odin now. We don't even have to download the megabyte consuming firmware packages. This time Samsung users can unbrick a soft brick on their phone at just a click and this method is working and also very safe. Full thanks to XDA member AdamOutler and his thread forum.xda-developers.com/showthread.php?p=15330252
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
whats now ?
Requirements:
1. A bricked Samsung Android phone (ofcourse)
2. A PC using Linux, Windows or Mac OSX with Java and Samsung USB drivers installed
3. A working USB data cable to connect to PC
4. Most important, Commensense and brain : )
Steps to Do (Instructions)-
I am supposing that you have already Samsung USB drivers installed. If not, download them here 4shared.com/file/UKUCQTOS/SAMSUNG_USB_Driver_for_Mobile_.html. Do restart (cold boot) your PC after installing drivers.
1. Make sure that you have latest version of JAVA installed in your PC. To check if it is installed or to download and install, refer java.com/en/download/installed.jsp
2. Download One Click Unbrick Tool from heimdall-one-click.googlecode.com/files/OneClick.jar to your desktop or in any folder.
3. Connect your phone to your PC using USB.
4. Turn on Odin mode or Download mode on your phone. You still do not need Odin. If you cannot get to Odin mode (vol down+home+power key) it means that either your battery is low than 10% or your phone is hard bricked. Try charging phone for 30 minutes first. If you still cant get to DL mode, use USB jig to get into DL mode (available on eBay for just Rs 100, you can make your own too).
5. For Linux and Mac OSX, double click on the downloaded file OneClick.jar and click on "Unsoft Brick" button and wait for the device to reboot by its own.
For Windows OS, right after step 4, goto the app folder and right click OneClickLoader.exe and choose to Run As Administrator. It is important to run it as administrator on Windows. Click on "Unsoft Brick" button and wait for the device to reboot by its own.
I tried it on my Samsung Galaxy Y, Samsung Galaxy TAB and Samsung Galaxy Grand and it seem to be working like a charm as it fixed its soft brick immediately. Try it
FAQ #1: It is not detecting my phone
---------- What? Are Samsung USB drivers installed correcting in local disk C:\ drive (C:\SAMSUNG\USBDrivers). If yes, uninstall those drivers> reboot> install again> reboot your PC and phone both. If it still does not detect, try another USB port of your computer. Also make sure that you are running this app as an administrator with all priviliges and your USB is working. If Kies, ADB or any other software that communicates with your phone except One Click Unbrick Tool is started, turn them off too via Task Manager. NOT WORKED? Try goto Device Manager (in One Click Unbrick Tool, there is an option for this) and select device as SAMSUNG COMPOSITE DEVICE.
FAQ #2: I get error USB DEVICE NOT RECOGNIZED when I plugged in my device with my USB.
-------- Oh!! I think that your USB cable is malfunctioning. I had the same error (even with GT-S5360 USB). I used LG USB and it did fix that error. If still it gives error, make sure that the drivers are installed correctly (see FAQ #1) and your PC is not in saving mode
FAQ #3: Have I to downliad firmware packages or files too?
-------- No, One Click Unbrick Tool is enough! You do not need any firmware packages.
FAQ #4: What about its working?
-------- It is based on Odin, but not Odin!
(more FAQs soon......................)
Click to expand...
Click to collapse
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
??
driverjacek said:
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMC2.tar.md5 is valid.
<OSM> CSC_S5360_OXXMD1.tar.md5 is valid.
??
Click to expand...
Click to collapse
Those are file names of a firmware and is what is displayed in the odin log when you load them into odin
See my firmware thread for full instructions and all odin flashable firmware
Links as ever on my thread you can access from my signature below
marcussmith2626 said:
Those are file names of a firmware and is what is displayed in the odin log when you load them into odin
See my firmware thread for full instructions and all odin flashable firmware
Links as ever on my thread you can access from my signature below
Click to expand...
Click to collapse
It is displayed for odin after loading 3 files. in the left FAIL
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMC2_S5360OXXMC2_RST_S5360XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
after loading for odin, wait 10 min and show FAIL.
driverjacek said:
It is displayed for odin after loading 3 files. in the left FAIL
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMC2_S5360OXXMC2_RST_S5360XXMC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
after loading for odin, wait 10 min and show FAIL.
Click to expand...
Click to collapse
That log shows you have not split the firmware and have just placed the full unsplit firmware in odin
Galaxy y does not support single file firmware flashing and must be split into pda modem and csc
As I said all firmware and instructions are on my firmware thread with already split firmware
Links as ever below in my thread in my signature
cool bro thanks
u can try this method to unbrick any samsung android phone
Hello guys,
Odin recognizes my N7100 but simply does not work. I tried all Odin versions, using different cables and uninstalling/reinstalling drivers. Odin sees the phone when I connect via original USB cable or any other cable, but when I try to flash anything (BL, AP, CSC, etc.), it stops at 'get pit for mapping' for some time then I receive 'complete (write) operations failed - success 0 failure 1' error. During this time there's nothing happening on phone's screen. Only shows 'downloading... do not turn off target'.
Please help me. I am so depressed.
try switching off the antivirus
hope i helped, bests
Sent from my GT-N7100 using Tapatalk
Hey guys, im new with this model.
A friend apply a OTA to this phone and now the phone dont boot, in odin the EMMC firm is [] (nothing in).
Odin cant load a rom to the phone now, im ****ed, not with PIT file. Stuck in setup conection or writting NAND followed by a huge fail.
Someone with a suggestion?
Thanks.
Reflash it with the same or older ROMs, better go for the older ones.
If you get this error then your PIT is damaged
<ID:0/009> There is no PIT partition.
Then you need to flash with the .pit file,
This should be done only if, it is that much essential.
1. Connect phone to PC and see it gets detected.
2. Click on the PIT button and browse for the .PIT file in the zip
3. Click on PDA and browse for the original firmware file (
4. Ensure that all three check boxes, i.e. Auto Re-boot, Re-Partition, F. Reset Time are selected (checked). Re-Partition shoul be selected only if u have selected PIT file
See This thread to download PIT file thanks to DMJoh
I tried with PIT, but Odin show me:
Writing NAND.
FAIL!
Without PIT odin stuck at "setup conection" message.
Downloading a old rom to try. But i think the emmc die.
Thanks.
1. Was USB Debugging enabled on your device?
2. You got the latest Samsung drivers installed on your pc?
3. Did you make sure Samsung kies is not running in the system tray?
4. Make sure any antivirus or firewalls are switched off.
1 . Phone dont boot.
2. Yeah i installed that stuff yesterday.
3.kies closed.
4.no antivirus on my pc
coldrazor said:
1 . Phone dont boot.
2. Yeah i installed that stuff yesterday.
3.kies closed.
4.no antivirus on my pc
Click to expand...
Click to collapse
Hi,
Use diff USB cabel and Diff USB port and try again sometimes problem will with cable or port though it detects in PC probs will occur on flashing
I tried in two more pcs with diferent cables but nothing, sadly i think the phone is dead, maybe with a box.
Hello,
i have a problem whit installing a tab s4 with odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 6040 M
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
This is all it do cant find the problem
i have this problem too. tried odin 1.13.3, odin 1.13.1patched, newer samsung mobile drivers, usb3 cable, another computer usb port. tried after ota update to bootloader 2 OREO. nothing yet helped. please help to find solution.
Please try this
Install KIES, then uninstall it and then try Odin flash.. If that also fails then Connect your tab to your computer via USB 2.0 hub and try Odin flash..
flashed firmware/twrp with odin 1.13.1 a730f, n950f, j400f, t825, with odin 1.13.3 t725, a405fn. but cann't flash T835.
tried bootloader locked/unlocked too. also waited over 168hours with samsung account logged in.
Try launching Odin as an administrator and use the stock OEM Cable in a USB 2.0 port
I also have the same problem when using Odin on my Samsung Galaxy Tab S4, anyone know what the problem is?
solved
!worked only on old intel i5-2520M notebook!
odin3 v3.13.1 usb drivers 1.7.17.0
no chance to flash with AMD on A12-9720P notebook and Ryzen 7 3700X pc.
I know the OP resovled their issue, but I had the same problem and a cheap USB 2.0 hub was the magic bullet for me. I had upgraded my computer and all it has are 3.0 ports.
I hope this may help someone else.