Hi all,
I have a Find 7 QHD on Paranoid Android 4.6 BETA 4.
Got an OTA update this morning (BETA 5), installed it and I just get get black screen on boot that goes no further.
I also restored a previous backup and manually updated to latest beta with same results.
Has anyone with Find 7 had any luck with the latest PA 4.6 BETA 5? Wondering if it's something with my setup or the update itself.
Thanks in advance.
Same issue, tried from Beta 4 upgrade and clean install but both won't boot.
I can confirm that the latest update breaks PA completely (for me, anyway). Guess I'll just have to wait for the next big update.
Same thing happened to me...7a here
That sux, but I'm glad it's not just me.
Have seen many reports of this, guess I'm staying on BETA 4.
Hey, just giving a quick update to all o' y'all: The newest PA beta build boots without a hitch! I know that it's been out for some time now, but I just tried it and I seemed to have very few problems other than the processor refusing to go into its low power state (which also happens with Cyanogenmod for me, so I'm not sure what's going on there).
Anyway, happy flashing as always!
Hi all,
Just rooted my device for the first time today using TWRP and flashing SuperSU. I was hoping it was going to give me the ability to upgrade my device to a stock android version of Lollipop. As I'm looking around it seems like that is not supported by the community. I have used the search bar and haven't come up with much, except a few old threads when Lollipop was just released.
I found this thread here: http://forum.xda-developers.com/showthread.php?t=2755532 that suggests nobody has modded it past it's final android update 4.2.2. The only difference it seems is it gets rid of some of the uninstallable Samsung and Google apps.
I just wanted to confirm that there is no development going on past 4.2.2 for the Samsung Galaxy Tab 3 Lite (SM-T110) before I flash a new ROM from the list.
Thanks.
bump
I would also like to know, I bought the tablet today for my son, but never checked about the android version, and now i can't update the kids mode on it,so being to get it to update would be brilliant, if not i'll have to take it back and exchange it for one that has a newer version.
Maybe in the future:
https://forum.xda-developers.com/galaxy-tab-3/development-7/official-project-lineage-14-t3604371
Hello all
I went back to the p900, but only for a short time. My friend from the neighboring country gave me P900 for a few weeks. After 10 days of hard work, I made the first 6.0.1
Thanks
bonuzzz - my friend, thank you for the tablet. thanks for the support and help during the entire time working on 6.0.1
Schischu - thank you very much, this is realty great job on creating aosp for tab s series
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Reboot recovery
6. Flash firmware
7. Flash gapps
Known Issues
Bluetooth
Camera
Old working gapps: open_gapps-arm-6.0-micro-20160106.zip: https://drive.google.com/file/d/0B-6nm7Jks0W5TndJQ09HR0JDRTA/view?usp=sharing
Gapps - if you get "Unfortunaly, Setup Wizard has stopped" on first cm load. This is common problem.
Try find older version: 22 March or early (my link). Or you can delete Start Setup app: go back to twrp - Mount -> system, then Advanced -> File Manager -> system\priv-app\SetupWizard - select current folder and delete. Then reboot in system.
Links
6. 20160406: the April update of the Google Security systems: https://drive.google.com/file/d/0B-6nm7Jks0W5QVVwSHV5RUgxUmc/view?usp=sharing
5. 20160401: https://drive.google.com/file/d/0B-6nm7Jks0W5bWJfZjZuME9Gcms/view?usp=sharing
4. 20160331: https://drive.google.com/file/d/0B-6nm7Jks0W5VTJfdWdma1FFb0U/view?usp=sharing
3. 20160330: fix sdcard, gps: https://drive.google.com/file/d/0B-6nm7Jks0W5bVBJR3VFMXEwVWc/view?usp=sharing
2. 20160330: first cm 13.0 build: https://drive.google.com/file/d/0B-6nm7Jks0W5YUhROVNBN1dacG8/view?usp=sharing
1. 20160329: first aosp 6.0.1 build: https://drive.google.com/file/d/0B-6nm7Jks0W5NEZCMmROb2dQSHM/view?usp=sharing
Gapps
http://opengapps.org/
Platform: ARM
Android: 6.0
Sources
cm13.0 branch, in readme file (see device tree) all instructions for build.
CyanogenMod: https://github.com/CyanogenMod/
AOSP: https://github.com/Schischu/
Device: https://github.com/Valera1978/android_device_samsung_v1awifi
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos5420
Vendor: https://github.com/Valera1978/android_vendor_samsung_v1awifi
Camera issues when using the default camera app, or is it a hardware issue? I use the camera fairly often.
@Valera1978 Awesome work my friend! Congrats for one more wonderful work! You rock!
Thanks, I'm gonna try it.
Valera1978 said:
Hello all
I went back to the p900, but only for a short time. My friend from the neighboring country gave me P900 for a few weeks. After 10 days of hard work, I made the first 6.0.1
That's fantastic news @Valera1978 ! Was thinking of trading this machine in because lack of development. But in the same time I love it. It's a brilliant device and it's a pity so few people has found that out. So THANKS A MILLION Valera!
Click to expand...
Click to collapse
Huray. You are awesome.
I went back to the p900, but only for a short time. My friend from the neighboring country gave me P900 for a few weeks. After 10 days of hard work, I made the first 6.0.1
Click to expand...
Click to collapse
Are you going to work more on it? Because you have it for limited time, will be there someone else to continue?
Kubas_inko_CZ said:
Huray. You are awesome.
Are you going to work more on it? Because you have it for limited time, will be there someone else to continue?
Click to expand...
Click to collapse
The p900 will be available till end of the weekend, may be the next week also.
My plan simple - push another developers to continue work with cm13. In this limited time I want:
- make stable cm13 - building right now, hope today evening will be the first results
- clean-up my device/kernel/vendor (almost done)
- try fix camera - look like this is big issue for all exynos cm13 devices, but need at least try fix
And then I really hope thompatry will continue work with cm13.
And hope my sources will help make cm for related note pro 12.1 p901 and tab pro t900/t520. At least t900/t520 use the same kernel and very similar hardware.
Buggy Setup Wizard
How can I skip the buggy Wizard? It keeps popping up error messages.
My tablet was always diferent. I wasnt able to update to official lollipop (stuck on boot animation or every proces crashed) Cm12 is laging. And now, the android 6.0.1 is stack at boot screan animation. I also bricked it with official lollipop (from cm11 to official lollipop) and unbricked it with official kitkat. I really dont understand it. I need to do more with my little android development skills (i have successfully ported cm11 to friends phone, but only thanks it have little difrences from the official cm11 for the supported device) i dont know if u understand it but it doesnt matter
No way!! I wasn't expecting this.
I don't like posting this kind of useless message but I had to write a big THANK YOU. The thank you button doesn't cover how grateful I am for bringing a 6.0 ROM to our big guy.
Does the s-pen work? I can't flash it right now.
GRellinas said:
How can I skip the buggy Wizard? It keeps popping up error messages.
Click to expand...
Click to collapse
Sorry. I forgot to thank you for your work.
Please help me solve this problem with the buggy setup wizard. It keeps coming and I can't do anything .
GRellinas said:
Sorry. I forgot to thank you for your work.
Please help me solve this problem with the buggy setup wizard. It keeps coming and I can't do anything .
Click to expand...
Click to collapse
I had the same problem. Couldn't get past it. So I did a new clean install and this time without Gapps. The rom runs fantastic. Went to apk mirror and downloaded the latest GMS and installed it. Then I went to settings to add my G account. And couldn't go thru with it cause GMS keeps crashing. Don't know why. Gonna uninstall it now and install an older GMS
---------- Post added at 08:25 PM ---------- Previous post was at 07:40 PM ----------
thools60 said:
I had the same problem. Couldn't get past it. So I did a new clean install and this time without Gapps. The rom runs fantastic. Went to apk mirror and downloaded the latest GMS and installed it. Then I went to settings to add my G account. And couldn't go thru with it cause GMS keeps crashing. Don't know why. Gonna uninstall it now and install an older GMS
Click to expand...
Click to collapse
Edit: Tried an older variant of GMS and no success. Well just have to wait. Meantime its awesome running MM on what I thought was a dead device.
Thank you for this Valeria. Really appreciate you doing this. I've encountered most of the problems previously mentioned. Installed with Gapps. No joy. Did another install without. Running OK. One thing nobody else has mentioned is I can't see my external sdcard. Tried 3 different ones. 32, 15 and 4 GB. No luck with any. As for ROM. Nice. Fast. Smooth. Cheers
Cm 13.0 build is ready. Please see first post how to solve gapps problem. Tomorrow I'll check what is wrong with gapps. And then I'll start fix small problems. Still a lot of work, but now with working cm.
Wanted to first say I'm extremely grateful for your work; I've been keeping an eye on the CM threads here for weeks because this upgrade could make the P900 work like a new tablet.
I rely on it daily for college, so I'm kind of hesitant to flash just yet. But for those of you who try this ROM, I'd be very interested to know:
1) S-Pen -- For a separate S-Pen (the one with a separate eraser in addition side button), do the extra buttons work natively in LectureNotes or similar apps or does something else (e..g, "CM S Pen Add-on") need to be installed?
2) Encryption -- Does encryption/decryption work with TWRP 3.0.0.0 (or an earlier version)? Haven't had much luck getting TWRP to decrypt 5.0.2 stock, but as long as the OS can decrypt -- and I've been able to make backups -- I haven't worried about it.
3) Multi-Window -- In CM13, how adjustable are the windows? Can you achieve a setup where 2/3 of the screen is for one app while another app gets 1/3?
4) Camera -- Is it just the stock camera app that's having trouble? Would another app (e.g., Open Camera) work?
5) Microphone -- Is the mic working okay (e.g., for an app like LectureRecordings)?
6) Screenshots -- Is there a good solution for editing screenshots? Something that supports S-Pen? Being able to quickly crop and import things into LectureNotes is very useful. Noticed a new app called "Screen'it" in the store that might eventually be a good stock replacement, but I'd like to know if anybody's got a better solution.
Thanks so much for this! Just installed CM 13.0 build. Tried stock gapps 6.0 it failed. BUT....
Here is one *provisional* solution (you'll do better I'm sure) for the gapps setup wizard problem.
*Install the March 22 pico version.*
Of course, factory wipe.
Then follow the old school method and do both of these in ONE twrp session:
Flash CM 13.0 Marshmallow
Flash gapps 3/22 Pico
Wipe dalvik
Reboot
And you should be good to go!
This came up with another (older) tablet of mine, the Asus TF700t, which also returned the error when I first loaded a custom MM 6.01 version. That developer (Timduru) suggested using the March 22 Pico version of the gapps and it worked there.... and as I speak is now working on my Samsung Note Pro 12.2. I've not done anythng much with it yet, but will get back to you with anything I find.
Hope this is useful.
Blessings.
Okay... No Bluetooth. [Oops, correcton, Blue tooth *does* work.] No external sdcard. But very fast. Thanks and looking forward to usable version.
shonkin said:
Thanks so much for this! Just installed CM 13.0 build. Tried stock gapps 6.0 it failed. BUT....
Here is one *provisional* solution (you'll do better I'm sure) for the gapps setup wizard problem.
*Install the March 22 pico version.*
Of course, factory wipe.
Then follow the old school method and do both of these in ONE twrp session:
Flash CM 13.0 Marshmallow
Flash gapps 3/22 Pico
Wipe dalvik
Reboot
And you should be good to go!
This came up with another (older) tablet of mine, the Asus TF700t, which also returned the error when I first loaded a custom MM 6.01 version. That developer (Timduru) suggested using the March 22 Pico version of the gapps and it worked there.... and as I speak is now working on my Samsung Note Pro 12.2. I've not done anythng much with it yet, but will get back to you with anything I find.
Hope this is useful.
Blessings.
---------- Post added 30th March 2016 at 12:33 AM ---------- Previous post was 29th March 2016 at 11:44 PM ----------
Okay... No Bluetooth. No external sdcard. But very fast. Thanks and looking forward to usable version.
Click to expand...
Click to collapse
Thank you.
Yes, you are right, something wrong with the latest gapps. On p905 with latest gapps we are geting the same start wizard problem.
I finished the firmware late at night and had no time to check the different gapps.
Today will be full test and cleanup.
Remove sertupwizard from /system/priv-app to skip wizard. You can do it with twrp file manager
There is rallye no bit different betwene android 5.1.1 (cm12.1) and android 6.0.1 (cm13). The only one i really like is multi window. But still awesome work Valera.
---------- Post added at 11:46 AM ---------- Previous post was at 11:43 AM ----------
Can it be gaps version problem? Because i use micro and have no problem with it. (Yet)
Valera1978 said:
Thank you.
Yes, you are right, something wrong with the latest gapps. On p905 with latest gapps we are geting the same start wizard problem.
I finished the firmware late at night and had no time to check the different gapps.
Today will be full test and cleanup.
Click to expand...
Click to collapse
shonkin said:
Thanks so much for this! Just installed CM 13.0 build. Tried stock gapps 6.0 it failed. BUT....
Here is one *provisional* solution (you'll do better I'm sure) for the gapps setup wizard problem.
*Install the March 22 pico version.*
Of course, factory wipe.
Then follow the old school method and do both of these in ONE twrp session:
Flash CM 13.0 Marshmallow
Flash gapps 3/22 Pico
Wipe dalvik
Reboot
And you should be good to go!
This came up with another (older) tablet of mine, the Asus TF700t, which also returned the error when I first loaded a custom MM 6.01 version. That developer (Timduru) suggested using the March 22 Pico version of the gapps and it worked there.... and as I speak is now working on my Samsung Note Pro 12.2. I've not done anythng much with it yet, but will get back to you with anything I find.
Hope this is useful.
Blessings.
---------- Post added 30th March 2016 at 12:33 AM ---------- Previous post was 29th March 2016 at 11:44 PM ----------
Okay... No Bluetooth. No external sdcard. But very fast. Thanks and looking forward to usable version.
Click to expand...
Click to collapse
You're absolutely right. Installed open Gapps 0322 Pico and no problems with GMS. Restoring all my apps now. Tried with Pico Gapps 0330 first but no luck. Thanks for your tip ?
R there any new kernel for Mondrian wifi sm-t320
i tried several time to upgrade to lollipop and marshmallow device work fine for 5 days or less, after that it become dead
i have to wait 3or 4 days it restart again and i go back to stock rom .
What's wrong with the Kernel as it is! I mean as a T325 (LTE), owner I'm kinda jealous of the fact that the T320 (WiFi), has all the support it has. Having compiled my own build of CM-12.1 (i.e. Lollipop), by using the same mondrianwifi Kernel (from CyanogenMod). Everything that needs to work just does. The same could be said for Marshmallow (CM-13.0), but I'm not quite able to get the Phone bits working, and the unofficial nightlies that are being created crpalmer. Are all outta date by a good month now.
So I'm a bit confuse as to what your problem is since you should just be able to flat out install pre-built images though TWRP Recovery. And, should CyanogenMod not be your 'thing' there are a few more options to you, that again as a T325 user I do not have.
sorry i cannot understand what do u main
I can not upgrade
Device stops working completely
After the upgrade to 5 or 6 days
But it does not stop working after many days
Some of them advised me to upgrade the kernel
Now that I have a root
And also TWRP Recovery.
The version used 13 cm but the machine stopped working.
Now promised to KIT KAT
Hi there,
I have a Samsung Galaxy Tab 3 (GT-P5210) and I would like to install it a custom rom.
Now it has the stock android version, and I would like to install a stable rom with better performance (as vanilla as possible).
I can’t find the last cyanogenmod stable rom for this tablet.
Can anyone give some feedback/support to update this tablet?.
Many thanks in advance.
Cyanogenmod project has been dismissed, but the good work continues with the LineageOS mods. I tried it and found several problems in 14.1 release (Android 7.1):
1. Tablet was not able to connect via USB with PC.
2. Developer options cannot be activated in the usual way (7 taps on build)
3. SuperSU showed several problem
4. Clean install after wipe hangs on boot
5. Clean install after complete formatting successfull, but first run configuration crashes at second step.
I hope developers would try to solve these issues, since the OS seems a very good update.
By the way, last stable Cyanogenmod for GT-P5210 is the 13.0:
https://forum.xda-developers.com/galaxy-tab-3/development-10/rom-cyanogenmod-13-0-t3342017