R there any new kernel for Mondrian wifi sm-t320
i tried several time to upgrade to lollipop and marshmallow device work fine for 5 days or less, after that it become dead
i have to wait 3or 4 days it restart again and i go back to stock rom .
What's wrong with the Kernel as it is! I mean as a T325 (LTE), owner I'm kinda jealous of the fact that the T320 (WiFi), has all the support it has. Having compiled my own build of CM-12.1 (i.e. Lollipop), by using the same mondrianwifi Kernel (from CyanogenMod). Everything that needs to work just does. The same could be said for Marshmallow (CM-13.0), but I'm not quite able to get the Phone bits working, and the unofficial nightlies that are being created crpalmer. Are all outta date by a good month now.
So I'm a bit confuse as to what your problem is since you should just be able to flat out install pre-built images though TWRP Recovery. And, should CyanogenMod not be your 'thing' there are a few more options to you, that again as a T325 user I do not have.
sorry i cannot understand what do u main
I can not upgrade
Device stops working completely
After the upgrade to 5 or 6 days
But it does not stop working after many days
Some of them advised me to upgrade the kernel
Now that I have a root
And also TWRP Recovery.
The version used 13 cm but the machine stopped working.
Now promised to KIT KAT
Related
Hi guys new to the forum ... i would like to answer me the question mentioned at the title...
Hi,
I have just installed CM12.1 rom-05-09-2015-cyanogenmod-12-1-n7100 for everyday use - I have done a clean install and restore from Titanium backup. I used Slim Zero Gapps (Slim_zero_gapps.BETA.5.1.build.0.x-20150709) instead of suggested Gapps within rom thread. I am not an expert, though have been using XDA Developers for help with android and IOS for years.
Calls seem to be working, wifi connectivity is good, mobile data seems to be working. I have some concerns re Bluetooth to my BMW car - previous CM12.1 rom was unstable in connecting. I have not used this yet in my car but will try it for a week.
I always liked the spen, and missed this until last week when I discovered Note Buddy; CM Spen Add-on; and Squid (previously papyrus) - all available from Playstore. I have this to my TB backup because it works so well.
As a 2nd choice I had previously used Blisspop: [OFFICIAL][STABLE]BlissPop v3.9 N7100 for about 2-3 weeks and found it extremely useable. If vanilla CM12.1 does not work well then I will revert to their ROM.
http://forum.xda-developers.com/galaxy-note-2/development/unofficial-blisspop-v3-5-n7100-t3137536
One concern I have is reverting to Kitkat or lower if CM12 + roms are not useable enough. I don't want to brick my phone if I try, but to be honest my N2 is 2 plus years old and I would just buy something new. I recently found a post advising how to return to STOCK using kies - I am not sure if this will work from lollipop but if all else fails I will try it....
http://forum.xda-developers.com/showthread.php?t=2088809
At the moment I am more than happy with CM12 and will persist - I can see me using N2 for another 6-12 months...
Good luck and hope this unexpert post is helpful.
yes, I use it as everydaybrom and you should be pleased with it
So I was wondering if my phone is "young" enough to get the marshmallow update and after a lot of googling I could not get a clear answer...
I own the LG Optimus G Pro E986 and it is almost 2 years and 9 months since the manufacture date and its current OS is Jellybean...
I searched on some sites and found out that LG will allow the marshmallow update on LG G phones first, if I remember correctly, but is LG still updating Optimus G Pro phones? Is there still a way I can get marshmallow?Also do you know any good ROM (marshmallow or lollipop) for the device?
Thanks
Don't expect anything from LG, especially not for EU and Open variants.
Some variants got their KitKat update in 2014, Korean variants (F240 models) got their Lollipop (5.0.2) update last year and that's pretty much it. LG doesn't plan and won't push any further updates for this device, especially it is now more than 3 years old. Hell, they gave up on E98x variants after a year My E988 got an initial 4.1.2 patch first day I got it, and no updates till April of 2014 (KitKat 4.4.2) and... Silence after that, so yeah, not even a full year of updates and support.
Your best chance to get some sweet Lollipop is to flash some of custom ROMs available - you can choose between stock based and AOSP based. I was maintaining SlimLP till recently it became obvious there will be no more updates to their Lollipop repos, and now I'm using custom CM builds. Marshmallow is a dead-end, simply too much stuff for this device is broken/obsolete/non-existent, and it has almost 0% dev interest because of that, locked bootloaders and LG's 30-variants-for-one-model idiotic policy.
So, if you want to keep your device 100% working, keep it on 4.1.2 or try to find a KitKat KDZ for your variant (I had to flash mine manually, LG's OTA didn't even offer KK update, and I didn't even knew there was a KK update before LG's PC suite prompted it). If you don't mind occasional bugs, glitches and crashes, move to custom ROMs (keep your jellybean as base, root it, if not rooted already, "unlock" with Freegee, flash TWRP).
Thats true... As a device its awesome and I am really satisfied by its performance but LG suddenly "forgot" it, like it never existed. I have installed cm12.1 nightly on my E986 but yeah there are some issues (black screens etc.)... so I will test it for some time and I will think if I switch to stock ( which worked smoothly and no problems) or not.
My last hope is BlurOS project which was started by a team in Vietnam's XDA and they are about to create Murshmallow ROM for LG GPro series too.
So whoever is interested please vote for it here (after you become member of the group)-> https://m.facebook.com/questions.ph...o-bluros-support-lg-t3372926&refid=9&_rdr#_=_
Also check the XDA thread about BlurOs ---> http://forum.xda-developers.com/optimus-g-pro/general/please-register-to-bluros-support-lg-t3372926
Try running CM 12.1 with Wild kernel (blackouts are fixed, not sure about flickering, haven't used that one in long time), or if someone else made a CM-compatible flashable zip of kernel I've used for Slim (I've fixed all display issues - no blackouts, no flashing, no glitches.. zombigrn made flashables of older kernels for BlissPop, not sure if they'll work on CM).
I saw that thread but I'm taking that with a reserve. I managed to get some Marshmallow ROMs to boot, but RIL, sensors, camera, NFC.. god knows what else... all broken. Not a job for one guy who just knows his way around and isn't a pro. I'll keep this phone as long as possible, and if someone with enough knowledge to fix those issues emerges, well, more ROMs on our way. But from current state of things... This device simply got it's EOL really, really quick. Too bad, it's still pretty good phone, but either way I'm looking towards an update - something cheap, unlocked and with good AOSP-based ROM support.
Hello, I'm new here and I'll go straight to my issue. A couple of days ago, I was gifted an old used galaxy tab 3 (3G and Wifi, 7 inch, SM-T211). The thing is, I did a factory reset from the OS BEFORE noticing it was already rooted and should've done it from the TWRP. What's more, it strangely left lots of data after it (super su is still installed, it left photos and accounts remembered). So, question #1: Is it safe to do a factory reset now, even after I incorrectly did it from the os. (btw, check root says the root is still ok) Then, my other question is regarding the OS version. It currently has 4.1.2 Jelly Bean and while it tecnically supports 4.4.2 KitKat oficially, the official repository from Samsung doesn't have a version for my tab's region (T211ZSANB1, Hong Kong and China). Question #2: Is it safe to install a 4.4.2 oficial rom for a different region (i assume not due to the differents 3G frequencies used, but still wanted to ask). Finally, while I looked up and down in the forum and the only rom I've found for my specific device (a CM11 kitkat build) has a non functional camera. Question #3: does anyone know if there isany fully functional build on the site and, if the is not, is it safe carry both a stock and a cm rom and switching between them on a regular basis?
Thanks in advance to everyone
it was funny how I realized mine was the new version now
I made this thread here so you guys can discuss, this is for information to others who have gotten the new elephone
1) How do we get root ?
No, there isnt any proper recovery last @Emileh ported it did not work very well you are able to flash it the recovery but you are unable to boot back into the system it just stuck at the elephone logo.
2) as of now we only have one rom that has been up here and running K06TE-A.A.vR14.E1.160707 (2016 Version)
K05TS-A.A.vR1E.E2.160217 (2015 Version)
3) cosmetic mixed up (happens alot on chinese phone)
my front is the old 2015 version cover but my back is the new fingerprint cover (possible you can confirm with that is the new elephone you have if you are not sure.
4) so no root and no cyanogenmod and no recovery ?
as of now Im not sure about root, cause I did tried to flash recovery from @Emileh but I could not boot back to android os, so we cant flash supersu,
kingroot and others dont work !
also there some memory layout changed, so it will render the android 5.1 roms useless, please dont try unless you know what you are doing and know how to recover from mediatek usb port
5) will CyanogenMod 13 work ?
to be honest we need a fully working recovery.
maybe there can explain and clear anything more that I left out, I have just gotten the phone
@skeleton1911 @BlueFlame4 @Emileh @Deepflex
somehelp would be nice. thanks would be nice to get cm13 for both the 2015 and 2016 working
Hey,
well the 2015 and 2016 versions are basically two different devices - despite having the same name they share very little. A unified CM 13 build is thus not only difficult to establish but I would even say that it makes things more complex than developing two single versions. That said, CM 13 for the 2016 should be rather easy to bring up because it ships with 6.0. Basically you could take Deepflex's P9000 tree, change it according to the 2016_P8000 and boom - should work. With that you can then of course also compile a working recovery to achieve root That's the theory at least
Is that so but we have yet to achive root and figure out what is the internal changes between those two? Maybe @Deepflux can lend a helping hand in this wish you could help out @BlueFlame4, cause I finally had the money to get this phone possible if you could look into the recovery issue on why it does not boot after flashing it aka bootloop at elephone logo
** Attempted to Port and it does not work. did repack twice.
Hey. Just saw this topic.
I made a better version of the recovery (but forgot to post it), which is actually able to flash roms. It now also mounts everything properly. Flashing root on stock rom works 100%. (only thing not working in ADB, I think).
I will upload it later.
Problem is, there are no roms (expect stock, which you flash using SP Flash Tools). You can't flash the roms that other have made for the old version of the phone. Doesn't work like that.
Emileh said:
Hey. Just saw this topic.
I made a better version of the recovery (but forgot to post it), which is actually able to flash roms. It now also mounts everything properly. Flashing root on stock rom works 100%. (only thing not working in ADB, I think).
I will upload it later.
Problem is, there are no roms (expect stock, which you flash using SP Flash Tools). You can't flash the roms that other have made for the old version of the phone. Doesn't work like that.
Click to expand...
Click to collapse
yeah @BlueFlame4
mention something about cyanogenmod from @Deepflex, could it be this ?
https://github.com/Deepflex/android_device_elephone_p8000/commits/master
hopefully we can get cyanogenmod working, possible if you release the recovery ? is it TWRP ?
Zenns said:
yeah @BlueFlame4
mention something about cyanogenmod from @Deepflex, could it be this ?
https://github.com/Deepflex/android_device_elephone_p8000/commits/master
hopefully we can get cyanogenmod working, possible if you release the recovery ? is it TWRP ?
Click to expand...
Click to collapse
I was talking about this. You have to adapt it to the P8000 and have to use a 3.18 kernel (+ M blobs) though.
there isnt any 3.18 kernel that was released right ? m blobs can be extracted question is why won't your cm13.1 work on the new elephone ? memory changes ? it is still same soc right or there is something different quite confused.
Bump
I am looking for a ROM that runs android nougat. I have a rooted device but have never installed a custom rom on it. Right now, it is just running 6.0.1 MOB30X, the latest update on stock. I want to upgrade to Nougat, but I don't really know what options are available. I want to keep my device close to stock android, like it already is. So, if someone could tell me what ROMs are available and which ones are the most popular and best?
DavidMTMaster said:
I am looking for a ROM that runs android nougat. I have a rooted device but have never installed a custom rom on it. Right now, it is just running 6.0.1 MOB30X, the latest update on stock. I want to upgrade to Nougat, but I don't really know what options are available. I want to keep my device close to stock android, like it already is. So, if someone could tell me what ROMs are available and which ones are the most popular and best?
Click to expand...
Click to collapse
If you want to keep close to the stock android the closest is the official lineageos build. All others have added features which may or maynot affect batterylife and performance.
LineageOS or AOSP will get you what you want.
crDroid 7.1.2 v3.3
Just fantastic! Add the elementalX kernal and buttersmoth experience!
DavidMTMaster said:
I am looking for a ROM that runs android nougat. I have a rooted device but have never installed a custom rom on it. Right now, it is just running 6.0.1 MOB30X, the latest update on stock. I want to upgrade to Nougat, but I don't really know what options are available. I want to keep my device close to stock android, like it already is. So, if someone could tell me what ROMs are available and which ones are the most popular and best?
Click to expand...
Click to collapse
In my experience no version superior to "Android 6" works well "out of the box" with full working applications of estreaming like youtube, netflix, etc .. and sometimes problems with root, my recommendation if it will be "Android 6" is still better Stock rom. Neither lineage nor much less AOSP and any derivative.
Newbies to all these updates and ROMs releases. I spent a good amount of time dumping various ROM.
I tried Lineages, Droid, Resurrection Remix. I think ASOP is Lineage?
All the ROMs above works well but I could not get gapp to going. Keep saying wizard error when starting up. Gapp is basically play store.
I tried that mini gapp bean and the open gapp 7.1 pico. They both fail during start up. It was trying to run the google apps wizard and keeps failing.
I ended up with Nitrogen-OS-flo-20170316 ROM. Let this ROM flash first than, reboot, go back in recovery mode and flash the Gapp 7.1 pico. This was the only way I can avoid the wizard failing during startup. Everything works except Latest netflix app failing. Get the apk from mirror apk and make sure you get the older apk version 4.2. Don't get the newest 5.x netflix release.
Resurrection Remix ROM looks cool. It's suppose to be faster than Linage.
Since everything is work for me with Nitrogen. I'll stick with nexus 6 Nitrogen for now.
or until someone prove me wrong. Or know why I am having all sort of issue installing Gapp pico on Resurrection Remix, Linage, or that Droid version.
---------- Post added at 06:38 AM ---------- Previous post was at 06:34 AM ----------
I am not sure if Android 6 or marsh mellow is the best. After I flash with Nougot. It's a lot faster. Loving it.
Hi guys, I just bought a Nexus 7 and i updated to latest official 6. Then i find out OTG Support doesnt have support for exFat, only FAT32. If i try to do Nougat, will it gain exFat support for OTG?
Also can anyone take my nexus 7 and do it for me for like $20-$30 as i am completely illiterate on all of this...
vartanarsen said:
Hi guys, I just bought a Nexus 7 and i updated to latest official 6. Then i find out OTG Support doesnt have support for exFat, only FAT32. If i try to do Nougat, will it gain exFat support for OTG?
Also can anyone take my nexus 7 and do it for me for like $20-$30 as i am completely illiterate on all of this...
Click to expand...
Click to collapse
This depends on the rom or kernel as much as whether it is Nougat. LineageOS supports exfat and has clear instructions on how to install it.
Wifi only Nexus 7 (2013) (Flo) https://wiki.lineageos.org/devices/flo/install.
4G and Wifi Nexus 7 (2013) (Deb) https://wiki.lineageos.org/devices/deb/install