need help please! (z00ad 55ml model) - ZenFone 2 Q&A, Help & Troubleshooting

i wiped the phone back to a clean superzen, took the fresh copy of the most up to date stock from the asus website for my 55ml z00ad and took the whole folder and put it in my phones sd card. i booted into twrp and tried to go to install.... it cant find it period and nothing comes up under install zip or install image.
can someone please help me? i just want to put the most up to date firmware stock back on my phone because ive had quite a few issues with superzen and compatibility with games due to older firmware version.

http://forum.xda-developers.com/zenfone2/help/trying-to-ze550ml-z008-raw-firmware-to-t3420533
Read through this thread for a general idea if need to flash via stock recovery
...or, twrp stock recovery flash, Rom by a Mr gourav here on xda
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526

timbernot said:
http://forum.xda-developers.com/zenfone2/help/trying-to-ze550ml-z008-raw-firmware-to-t3420533
Read through this thread for a general idea if need to flash via stock recovery
...or, twrp stock recovery flash, Rom by a Mr gourav here on xda
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Click to expand...
Click to collapse
welp i think after trying to follow the steps ive more so bricked it now.
install -> the z00a twrp 1.1gb zip
wait 20mins for it to install
error -7 could not install zip, device is busy (or something to that effect)
trying again but ill assume its going to happen again
edit:
nvm i managed to get it going. ty for all the links

XDAForumMember said:
welp i think after trying to follow the steps ive more so bricked it now.
install -> the z00a twrp 1.1gb zip
wait 20mins for it to install
error -7 could not install zip, device is busy (or something to that effect)
trying again but ill assume its going to happen again
edit:
nvm i managed to get it going. ty for all the links
Click to expand...
Click to collapse
Well done , now stop doing stupid things to your smart phone

Why don't you flash RussiaNBear rom? It's debloated and up to date.

Related

[Q] twrp wont flash roms on sgs3 (In need of a genius) will it be you

hey guys hope you guys can help when i flash this is what i get (updating partitin details....
running boot script...
finished running boot script.
simulating actions...
updating partitions details...) but the rom wont flash
heres the tricky i formated my system so i have no o.s. and my usb port does not sync it only charges i tried flasing twrp again and also phils touch and tried flashing different roms but to no prevail, my ? is is their any way with in my sdcard and twrp file manager where i can delete replace any files or scripts internally into my phone .
bigpappapuff said:
hey guys hope you guys can help when i flash this is what i get (updating partitin details....
running boot script...
finished running boot script.
simulating actions...
updating partitions details...) but the rom wont flash
heres the tricky i formated my system so i have no o.s. and my usb port does not sync it only charges i tried flasing twrp again and also phils touch and tried flashing different roms but to no prevail, my ? is is their any way with in my sdcard and twrp file manager where i can delete replace any files or scripts internally into my phone .
Click to expand...
Click to collapse
Did you update to 4.4.2?
Besacuse If you update the bootloader are experiencing the same problem as many of us.
You are speaking about scripts at boot. But you did not refer to the updater script that actually flashed the Rom. Also what Rom are you trying to flash ? What is your current bootloader and Recovery ?
Perseus71 said:
You are speaking about scripts at boot. But you did not refer to the updater script that actually flashed the Rom. Also what Rom are you trying to flash ? What is your current bootloader and Recovery ?
Click to expand...
Click to collapse
i put up the images i was on 4.3. i was running twrp v2.6.3.1
i was n the serx tw rom and was trying to flash liquid smooth and when back trying t flash serx again but cant the updater script is what i was trying to talk about is their any hope
I also tried t flash phillz touch and cant. my usb port nly charges if i can find a way that i can go internally threw wiring so i can connect odin ill be good.
I genuinely have a hard time trying to follow what you are saying. I did see the photos but they don't help much. I do want to help you. But I really having hard time following you.
Can you please articulate better? Or use Google translate if English is not your first language.
Perseus71 said:
I genuinely have a hard time trying to follow what you are saying. I did see the photos but they don't help much. I do want to help you. But I really having hard time following you.
Can you please articulate better? Or use Google translate if English is not your first language.
Click to expand...
Click to collapse
its started when i tried t flash liquid smooth rm 4.4.2 but twrp 2.6.3.1 would not flash all it would say is (updating partitions details....etc as shown in the image so i tried to flash serx rom 4.3 and it wouldnt flash. i also tried flashing philz touch cwm but it gave me the same result. my usb port only charges it wont sync with my pc so i cant odin back. is their anyway i can fix this issue thnx
Please use Mobile Odin and flash Stock Rom first. Then Flash latest TWRP again.
Perseus71 said:
Please use Mobile Odin and flash Stock Rom first. Then Flash latest TWRP again.
Click to expand...
Click to collapse
i cant no o.s. on the phone when i wiped i wiped everything except the micro sd and ineternal storage.
Oh, so are you telling me that right now, every partition on the phone is wiped cleaned and the USB port does not recognize in Odin ?
What Recovery is on it right now ?
Perseus71 said:
Oh, so are you telling me that right now, every partition on the phone is wiped cleaned and the USB port does not recognize in Odin ?
What Recovery is on it right now ?
Click to expand...
Click to collapse
twrp 2.6.3.1
Download SlimKat v 3.10 You will need Gapps.
Flash via the Recovery. Make sure to take a photo if error occurs.
Try using clockwork because I had alot of issues flashing newer Roms on twrp just sayin
Sent from my SGH-T999 using xda app-developers app
Maybe I missed something, but if you can get download mode, you should be able to use Odin. Have you tried reinstalling drivers?
Sent from my SM-N900T using Tapatalk

[Q] After using Quick Boot, Galaxy Tab 3 keeps booting into recovery

Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
ah_hin said:
Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
Click to expand...
Click to collapse
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
moonbutt74 said:
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
Click to expand...
Click to collapse
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Help
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
erikaj28 said:
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
Click to expand...
Click to collapse
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
ah_hin said:
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
Click to expand...
Click to collapse
Awesome! Thanks a ton!
Flash Files For Tab 3 Kids HELP
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
RK KINGKONG said:
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
Click to expand...
Click to collapse
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
how do i flash the full stock rom
ah_hin said:
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
Click to expand...
Click to collapse
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
RK KINGKONG said:
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
Click to expand...
Click to collapse
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
gr8nole said:
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
Click to expand...
Click to collapse
got you and thank you for your time .. now does this other file even matter usually they dont come in these tar zips
SS_DL.dll whats that for
Same situation. I rooted it fine. Installed a custom rom. No issues. Then it asked to update the supersu binary. Did that and now it keeps booting into TWRP no matter what I do. Gonna start fresh and this time I'll not use TWRP to update the binary I guess.
To fix the booting in recovery
flash stock recovery with oodin
now go to stock recovery
select clear cache
it will show error (and recovery crashes) and tab will boot normally.

[Guidance] SGH-T989 UPDATING ISSUE!

Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Did you follow the instructions to flash TWRP using Odin?
olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear
bump
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?
N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.
N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post
aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.

[ROM] MOAR MM Rom v4.1 - Toasted Edition - 07/22/2016

Not my work but it works now.
How to
Reboot in recovery
Wipe device
Flash Rom and kernel:
Download for rom:
Flash this after:
Reboot
Recommend using twrp 3.0.0.1
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
FingerBlastJ said:
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
Click to expand...
Click to collapse
Kernel fixes hardware issues
and if I'm on note 5 moar rom with patch.... no issue flashing right?
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Blzfrost said:
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Click to expand...
Click to collapse
Just flash Rom and kernel everything will work.
MonkeyAround said:
Just flash Rom and kernel everything will work.
Click to expand...
Click to collapse
Oh I'm setting everything up right now for the flash! I'm so excited. Once I realized you linked to a note 5 Rom most of my questions got answered. My favorite part, the kernel was posted on my bday.
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
FingerBlastJ said:
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
Click to expand...
Click to collapse
Update your TWRP.
https://dl.twrp.me/zenltespr/
yea I tried doing that with Odin and it would freeze mid way. I also tried flashing a twrp update zip file on twrp and that didn't work either.
you think I should flash with flash fire?
bricked my phone by trying to flash newer version of twrp with twrp manager
been trying to flash unbrick tar and pit file to get back up and running but its not working.
any help is much appreciated
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
FingerBlastJ said:
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
Click to expand...
Click to collapse
Have you checked for root with root checker? I have lost root access a few times in the past?
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
FingerBlastJ said:
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
Click to expand...
Click to collapse
Last thing I can think of is when opening TWRP the first time. It asks if you want to make the system 'read only'. Did you select No?
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
FingerBlastJ said:
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
Click to expand...
Click to collapse
Not sure. You can click mount and see what is mounted. I am not sure that will work. I am not sure exactly what you are trying to wipe, but mount the items you are attempting to wipe and make sure the read-only is unchecked.
Try this:
Check to see if oem is checked
Re-root via root tar/odin
twrp 3.0.0.1 from edge files post in general
Backup stock
Wipe
Flash Moar
Don't reboot
Flash skyhigh kernel
Flash xposed(don't have to)
Reboot
Allow it to boot loop a couple time (from sky kernel)
Give 5-10 minutes to boot
I just did it with no issues and I've personally had more luck with 3.0.0.1 than any of the others.
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
FingerBlastJ said:
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
Click to expand...
Click to collapse
Your on Lp bootloader that's your issue.
Download Marshmallow tar from the general post I made for rooting Bpg1.
Flash tar and follow post.
twrp. 3.0.x.x is more for marshmallow. You need to be on 6.0.1 not 5.1.1.
Don't use fireflash on this device.
Fireflash is more for phones with locked bootloaders like Verizon s4 on the of1 update.
Fireflash isn't really up to date with our phone and could easily brick your device.

Update error 7 during flashing of lineageos 14.1 nightly from february with twrp.

First experience with error 7:
I had cm13 installed on my asus zenfone 2, when i heard that lineageos replaced cyanogenmod i wanted to replace it with lineageos asap!So when the unofficial build was released, i made a backup of my apps with titanium back-up and CLEAN flashed the Unofficial lineagos nightly from 26-12-2016, then i saw the horror: ERROR 7! I was searching on google and youtube how to fix it, i could only find a way to bypass it.
You can delete the assert code from the "update-script" file to make i work. When i did that, i could flash the Unofficial lineagos nightly from 26-12-2016. After that i updated the bootloader with the newest version that existed on that day and then i could boot and i was happy.
Current state of my phone 9-2-2016:
Rom = Unofficial lineagos nightly from 26-12-2016.
I updated the bootloader, ifwi and the recovery with the upgrade file from the user jrior001 via this link: http://theflamingskull.com/zenfone2.html. Under the section: MM BOOTLOADER/FIRMWARE. I have manualy flashed twrp version: 3.0.3.1 (Thanks @Sayeed99), I have flashed the latest nightly from download.lineageos.org.
And i still get the error 7, after the error i erased all the assert codes from the "update-script" file and i still have error 7 with the extra message that you can't dirty flash the nightly from February on top of the actual rom because it is incompatible data. The only way to bypass it again, is by clean flashing the newest build by deleting the assert codes again. But clean flashing everytime gets annoying (thank god that titanium backup exists, i want to do it the usual way without error 7.
Can someone help me?
What do you want to do now , go back to stock M and try again ?
So.... I am ashamed of my self saying this but.
I managed to flash the newest nightly, the first time i had error 7 was because of a old bootloader, ifwi and twrp. I flashed everything from the flamingskull dudes website, and did a clean flash. Clean flash means that you delete every partition besides misc and external sd, after the delete of every partition you flash the nightly via twrp.
I will donate some money to the flamingskull dude for helping me with a problem he shouldn't have to.
Maybe i will make a youtube tutorial video for this thread, i will keep helping people on this thread because i feel guilty for not trying to clean install.
For the people that are stuck in twrp or anything else i guess you should follow the bricked device guide: https://forum.xda-developers.com/zen...t3452785/page1
And for people with update process error 7, i have made a thread about this problem and will make a youtube video for it, this is the link for the thread:
https://forum.xda-developers.com/zen...-14-1-t3553715
Please keep this thread about bugs and problems about the rom and flashing the rom.
Sorry flamingskull dude...
The video will come, i only need time for it.
Same Issue!!
I'm having the same problem I spent 2 days already working out on this issue now I reverted to lollipop stock ROM. Please help me with this. I tried to flash lineage-14.1-20170208-nightly-Z00L-signed.zip with latest TWRP version but getting error 7 every time. I updated the ''updater-script", proceeds well but after rebooting phone goes to Fasboot mode directly.
Help ME!!!
surajjadhav said:
I'm having the same problem I spent 2 days already working out on this issue now I reverted to lollipop stock ROM. Please help me with this. I tried to flash lineage-14.1-20170208-nightly-Z00L-signed.zip with latest TWRP version but getting error 7 every time. I updated the ''updater-script", proceeds well but after rebooting phone goes to Fasboot mode directly.
Help ME!!!
Click to expand...
Click to collapse
Z00L?
Download every file from theflaminskull.com website under the section MM bootloader. Use the upgrade.bat file to upgrade everything from your phone.
After that clean flash ( delete every partition except external sd) the newest nightly from https://download.lineageos.org/Z00A, make sure you use the newest twrp version: 3.0.3 from say99. It is included in the upgrade.bat file. You can also manually flash it if the upgrade.bat file did not work.
Make backups with twrp or titanium backup to restore your missing apps on the new clean rom or revert back to the old state of the phone.
This worked for everyone, no discussion. If you experience problems during the process you must restart all devices in the process and try again. Or you must follow the unbrick guide for Z00A.
Good luck.
On 551 0r Z00A To prevent, ever to having this error in the beginning .
Reboot to bootloader -- Check IFWI version number >
0094.0173 is unlocked LP bootloader
0094.0177 is Locked LP bootloader
0094.0183 is M bootloader
There are many ways to upgrade bootloader , one is Jasons via the files pijetri links above Or you can if still on LP versions -- flash back stock recovery for .184 LP upwards--adb sideload .184 stock or upwards to .198 -- set up then upgrade to M -- Then use the Modder tools to unlock bootloader flash TWRP and root and more importantly back-up stock M rom before flashing away to your hearts content
EDIT: Fixed... messed up a little bit, but still got a tiny problem:
Every time I boot I get this message with a red triangle saying that my device couldn't be verified or something like this and a link to some site. Any way to fix this?
https://support.google.com/nexus/an...6407473287604-1344347192&p=verified_boot&rd=1
firecharge said:
EDIT: Fixed... messed up a little bit, but still got a tiny problem:
Every time I boot I get this message with a red triangle saying that my device couldn't be verified or something like this and a link to some site. Any way to fix this?
https://support.google.com/nexus/an...6407473287604-1344347192&p=verified_boot&rd=1
Click to expand...
Click to collapse
Thats normal if unlocked bootloader in M ,nice to see you upgraded already :good:
pijetri said:
So.... I am ashamed of my self saying this but.
I managed to flash the newest nightly, the first time i had error 7 was because of a old bootloader, ifwi and twrp. I flashed everything from the flamingskull dudes website, and did a clean flash. Clean flash means that you delete every partition besides misc and external sd, after the delete of every partition you flash the nightly via twrp.
I will donate some money to the flamingskull dude for helping me with a problem he shouldn't have to.
Maybe i will make a youtube tutorial video for this thread, i will keep helping people on this thread because i feel guilty for not trying to clean install.
For the people that are stuck in twrp or anything else i guess you should follow the bricked device guide: https://forum.xda-developers.com/zen...t3452785/page1
And for people with update process error 7, i have made a thread about this problem and will make a youtube video for it, this is the link for the thread:
https://forum.xda-developers.com/zen...-14-1-t3553715
Please keep this thread about bugs and problems about the rom and flashing the rom.
Sorry flamingskull dude...
Click to expand...
Click to collapse
Thank you man, I was with this error, but with your help I got instaled Lineage Os 14.1.
Can I make a video in portuguese with yours instructions???????
pijetri said:
So.... I am ashamed of my self saying this but.
I managed to flash the newest nightly, the first time i had error 7 was because of a old bootloader, ifwi and twrp. I flashed everything from the flamingskull dudes website, and did a clean flash. Clean flash means that you delete every partition besides misc and external sd, after the delete of every partition you flash the nightly via twrp.
I will donate some money to the flamingskull dude for helping me with a problem he shouldn't have to.
Maybe i will make a youtube tutorial video for this thread, i will keep helping people on this thread because i feel guilty for not trying to clean install.
For the people that are stuck in twrp or anything else i guess you should follow the bricked device guide: https://forum.xda-developers.com/zen...t3452785/page1
And for people with update process error 7, i have made a thread about this problem and will make a youtube video for it, this is the link for the thread:
https://forum.xda-developers.com/zen...-14-1-t3553715
Please keep this thread about bugs and problems about the rom and flashing the rom.
Sorry flamingskull dude...
Click to expand...
Click to collapse
@pijetri The links are broken in your post. Can you share them with me, please? If you have video would be also great
Let me give some details about my device to help me here... thanks in advance:
Zenfone 2 ASUS_Z00A
IFWI VERSION: 0094.0173
Before wiping everything it was running the Stock ROM with Lollipop Android 5
Current status of the machine, no stock ROM anymore. I can boot into bootloader and TWRP recovery 3.0.2-0
Please correct me if there is something i should be doing in a different way. Thanks in advance.

Categories

Resources