no reboot / no fastboot / no screen on
the Device manger recognize it as "RELink HS-USB QDLoader 9008 "
PLz help ! Thanks !
YuHaoLin said:
no reboot / no fastboot / no screen on
the Device manger recognize it as "RELink HS-USB QDLoader 9008 "
PLz help ! Thanks !
Click to expand...
Click to collapse
What did you do to your phone before you got this? That's a message that you get when you're bricked
xunholyx said:
What did you do to your phone before you got this? That's a message that you get when you're bricked
Click to expand...
Click to collapse
what to do i am also bricked
Rithul Rèsèmblès said:
what to do i am also bricked
Click to expand...
Click to collapse
http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Read it all the way to the bottom of the page
Rithul Rèsèmblès said:
what to do i am also bricked
Click to expand...
Click to collapse
The question posed to the OP (post above yours) also applies to you.
You should always provide as much information as possible, when asking for help. What happened before the condition occurred, what mods were done or attempted, what you tried to do afterwards, etc.
Posting 1 or 2 sentences"I am also bricked", "I have the same problem", etc. is never the right way to post, and will never get any proper help.
xunholyx said:
http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Read it all the way to the bottom of the page
Click to expand...
Click to collapse
This link I gave doesn't work on the M8 (or M9 or HTC 10)
From what I understand by the research I have done, it can only be fixed by sending the phone in to HTC for repair.
Sorry.
l also need the right rom for 9008model of m9 or htv31
Related
Hello, I have bricked my phone through restoring some IUNI OS, just to try it out and now I cannot fix my phone. I cannot see the screen or anything, I'm not even sure what recovery I have installed as I cannot see it! In device manager, my Oppo Find 7 comes up as "RELINK HS-USB QDLoader 9008" rather than what is mentioned. I don't know what to do, please help me someone?
proazy said:
Hello, I have bricked my phone through restoring some IUNI OS, just to try it out and now I cannot fix my phone. I cannot see the screen or anything, I'm not even sure what recovery I have installed as I cannot see it! In device manager, my Oppo Find 7 comes up as "RELINK HS-USB QDLoader 9008" rather than what is mentioned. I don't know what to do, please help me someone?
Click to expand...
Click to collapse
http://community.oppo.com/en/forum.php?mod=viewthread&tid=23067
Try this.
Skickat från min iPhone 6 64GB med Tapatalk
Thanks for the help, however I have already tried this and because of the fact that my phone does not come up as "QHSUSB_BULK" or even "Qualcomm 9006/9008"
Many thanks, Adam
MrJiM said:
Try this.
Skickat från min iPhone 6 64GB med Tapatalk
Click to expand...
Click to collapse
Thanks for the help, however I have already tried this and because of the fact that my phone does not come up as "QHSUSB_BULK" or even "Qualcomm 9006/9008"
Many thanks, Adam
Hello.
My LG G3 D855 Variant has been bricked.When trying to enter download mode startup screen Flashing and then to black screen.My PC is detecting my phone as Qualcomm HS-USB QDLoader 9008.Please help!:crying:
sachinvfrancis said:
Hello.
My LG G3 D855 Variant has been bricked.When trying to enter download mode startup screen Flashing and then to black screen.My PC is detecting my phone as Qualcomm HS-USB QDLoader 9008.Please help!:crying:
Click to expand...
Click to collapse
Hello,
Can you tell us what exactly you were trying to do? Also what firmware was your device running?
-Vatsal
Vatsal said:
Hello,
Can you tell us what exactly you were trying to do? Also what firmware was your device running?
-Vatsal
Click to expand...
Click to collapse
I'm Using LG G3 D855 European Variant
sachinvfrancis said:
I'm Using LG G3 D855 European Variant
Click to expand...
Click to collapse
Im in exactly the same position with exactly the same phone. Just got my phone back from LG repair and they said because it was rooted they wont repair it. Its stuck in boot loop and will only enter download mode for about 2 seconds before it enters boot loop again.
Computer only recognises it as Qualcomm HS-USB QDLoader 9008
Only message it gives is [330] boot verification fail - cause : MISMATCH_SIG_LEN
I was on CM13 and started to flash a new rom and it got stuck at 5%. After hours I disconnected the battery and this is what im left with.
Please help as every guide for Qualcomm HS-USB QDLoader 9008 is for different variants
Can anyone help??????
Matt
search for boarddiag 2.99 in g3 subforum, it will help you. Also see links in my signature. I do also have the tool somewhere on my androidfilehost. Also note that you need a tot file(it can be older, yes)
bender_007 said:
search for boarddiag 2.99 in g3 subforum, it will help you. Also see links in my signature. I do also have the tool somewhere on my androidfilehost. Also note that you need a tot file(it can be older, yes)
Click to expand...
Click to collapse
OK bit overwhelmed so much info on this subject but not found a guide I can follow yet. The only one I found has a password on the zip containing the tool. I've emailed the developer and will sit and wait.
Feel like I may not see my G3 again
Matt
matt1500 said:
OK bit overwhelmed so much info on this subject but not found a guide I can follow yet. The only one I found has a password on the zip containing the tool. I've emailed the developer and will sit and wait.
Feel like I may not see my G3 again
Matt
Click to expand...
Click to collapse
Hm, have you seen: this
bender_007 said:
Hm, have you seen: this
Click to expand...
Click to collapse
Wow nice find very good although zappin the motherboard looks well scary. Also after my device has been returned by LG it is not longer recognized by device manager as Qualcomm HS-USB QDLoader 9008 but rather as LGE AndroidNet USB Serial Port (COM 3)
Is this a significant change?
Has it made it easier or harder to fix?
Thanks guys for your help and input
Matt
You don't have to open it, you are already in 9008 mode
Sent from my LG-H815 using Tapatalk
bender_007 said:
You don't have to open it, you are already in 9008 mode
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Ok so I got it back to 9008 mode I follow the thread and after downloading the tot file I extract it using the said method in BoardDiag 2.99 and it just comes up Error-Max number of partition
Do you know what this means???
Matt
I am on the same page
Have you fixed the error message:
Max number if partition coming from Boarddiag ?
Hi ,
after fixing 9008 qualcom issue and getting to download mode i flashed the wrong TOT files and flash tool failed after "Laf memory size"
now i can't get back to download, can't get back to 9008 qualcom and all i can see is the LG logo and then the phone is dead, with no response at all,
can someone please assist, even getting me back to 9008 is great and i can take it from there...
hope you will help me!
Thanks
Here you go buddy.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085
can windows device menager see the device ?
Jahanzaibawan said:
Here you go buddy.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085
Click to expand...
Click to collapse
Thanks,
but im looking for an option without HW issues, as i dont think i could be able to solder and shorten the board.
any other ideas?
when i plug the phone the computer pops a message with Unreconginzed connection
Hello guys,
After an update to android 7.0 my cell phone started to show difficulties to load. When I connect it on it gives the following message: Caution: High temperature of the device.
This happened after I updated the firmware to the latest version. I wonder if it is to restore the system and go back to version 6.0 of android?
Thank you all,
Best regards
Lando
I have a feeling you'd need to unlock the bootloader. Even so it may not allow you to install MMon it...
Usually the newer firmware replaces the bootloader that rejects older versions of the OS to be flashed.
Help
ultramag69 said:
I have a feeling you'd need to unlock the bootloader. Even so it may not allow you to install MMon it...
Usually the newer firmware replaces the bootloader that rejects older versions of the OS to be flashed.
Click to expand...
Click to collapse
Yes, actually I already unlocked but it did not work. When I try to flash the ROM it says that the version is impractical with the CPU. And nothing truth is not because I've tried more than 5 old roms.
Please if anyone knows how I do this downgrade help me, because I have to have to try several times to load the phone with it turned off.
Many thanks to any help!
landognr said:
Yes, actually I already unlocked but it did not work. When I try to flash the ROM it says that the version is impractical with the CPU. And nothing truth is not because I've tried more than 5 old roms.
Please if anyone knows how I do this downgrade help me, because I have to have to try several times to load the phone with it turned off.
Many thanks to any help!
Click to expand...
Click to collapse
Boot latest twrp
wipe everything on phone in twrp (tick all boxes)
Flash the correct (2.4ghz or 2.15ghz) android 6.0 rom from the asus website. You will need to transfer the zip file to your phone from computer while in recovery. Sometimes you have to reboot twrp after wiping to see the storage on your computer.
Be careful as wiping you phone will remove the os and will result in soft brick if u don't flash the android 6.0 rom.
I have reverted to android 6.0 twice on the sd821 variant but still only do this if you are confident.
I am not responsible if you brick your phone
Brick
Huffy1 said:
Boot latest twrp
wipe everything on phone in twrp (tick all boxes)
Flash the correct (2.4ghz or 2.15ghz) android 6.0 rom from the asus website. You will need to transfer the zip file to your phone from computer while in recovery. Sometimes you have to reboot twrp after wiping to see the storage on your computer.
Be careful as wiping you phone will remove the os and will result in soft brick if u don't flash the android 6.0 rom.
I have reverted to android 6.0 twice on the sd821 variant but still only do this if you are confident.
I am not responsible if you brick your phone
Click to expand...
Click to collapse
Hello friend,
Unfortunately at the time of doing the procedure by an oversight on my part I forgot to do the full wipe. I circled the correct ROM for my phone, but did not do the wipe.
The phone rebooted, hung up and did not call anymore. I can not believe it looks like it gave soft brick due to this my carelessness.
It does not go into fasboot or recovery mode. It gets totally off and when I connect to the pc it recognizes as Qualcomm hs-usb qdloader 9008.
I'm desperate, have I lost my phone? Is there any way to fix this friend? Please ask if anyone knows any procedure to correct it.
Thank you from the heart.
=(
landognr said:
Hello friend,
Unfortunately at the time of doing the procedure by an oversight on my part I forgot to do the full wipe. I circled the correct ROM for my phone, but did not do the wipe.
The phone rebooted, hung up and did not call anymore. I can not believe it looks like it gave soft brick due to this my carelessness.
It does not go into fasboot or recovery mode. It gets totally off and when I connect to the pc it recognizes as Qualcomm hs-usb qdloader 9008.
I'm desperate, have I lost my phone? Is there any way to fix this friend? Please ask if anyone knows any procedure to correct it.
Thank you from the heart.
=(
Click to expand...
Click to collapse
Hi sorry I'm having trouble understanding what your stuck at. You saying the phone doesn't boot at all?
Huffy1 said:
Hi sorry I'm having trouble understanding what your stuck at. You saying the phone doesn't boot at all?
Click to expand...
Click to collapse
Exactly! My phone doesn't boot, just recognizes how QUalcomm HS-USB QDLoader 9008 in my PC. He's dont boot or fastboot mode and dont recovery. Could you help me please?
landognr said:
Exactly! My phone doesn't boot, just recognizes how QUalcomm HS-USB QDLoader 9008 in my PC. He's dont boot or fastboot mode and dont recovery. Could you help me please?
Click to expand...
Click to collapse
Ok restoring your phone with the Qualcomm loader is a very lengthy and complicated process. When the phone is completely off. Hold down the volume up button and power button for a while until the Asus logo appears on the screen. Then open cmd in your android-sdk folder and type "fastboot devices." Let me know if it detects the phone
Huffy1 said:
Ok restoring your phone with the Qualcomm loader is a very lengthy and complicated process. When the phone is completely off. Hold down the volume up button and power button for a while until the Asus logo appears on the screen. Then open cmd in your android-sdk folder and type "fastboot devices." Let me know if it detects the phone
Click to expand...
Click to collapse
Hello friend,
Unfortunately this procedure dont work, my device dont turn on. With power + vol up or power + vol down or both at the same time dont work, because he gives no sign of life. All I can do is connect the PC and recognize how Qualcomm hs-usb qdloader 9008 in device manager. You know others procedure to do?? Thank you
landognr said:
Hello friend,
Unfortunately this procedure dont work, my device dont turn on. With power + vol up or power + vol down or both at the same time dont work, because he gives no sign of life. All I can do is connect the PC and recognize how Qualcomm hs-usb qdloader 9008 in device manager. You know others procedure to do?? Thank you
Click to expand...
Click to collapse
What phone version do u have? S821 or s820?
Huffy1 said:
What phone version do u have? S821 or s820?
Click to expand...
Click to collapse
I think s820, my phone is CPU 2.15GHz version. Thank your repply
landognr said:
I think s820, my phone is CPU 2.15GHz version. Thank your repply
Click to expand...
Click to collapse
Ok well unfortunately my phone is s821. You need someone here that has a s820 to factory reset then backup their phone. Then you can use the Qualcomm loader to restore your phone.
Huffy1 said:
Ok well unfortunately my phone is s821. You need someone here that has a s820 to factory reset then backup their phone. Then you can use the Qualcomm loader to restore your phone.
Click to expand...
Click to collapse
Ok man, but where can i find files to do a factory reset?
im searching in.web but i cant find. Please bro help me, i dont know what do. You are my last hope to solve this, thanks
landognr said:
Ok man, but where can i find files to do a factory reset?
im searching in.web but i cant find. Please bro help me, i dont know what do. You are my last hope to solve this, thanks
Click to expand...
Click to collapse
Like I said as this is such an uncommon phone it probably doesn't exist. You need someone willing to upload a backup of their phone 2.15ghz for u to restore.
Huffy1 said:
Like I said as this is such an uncommon phone it probably doesn't exist. You need someone willing to upload a backup of their phone 2.15ghz for u to restore.
Click to expand...
Click to collapse
Ok Man, but can you send me the step by step of how you managed to solve your problem, regardless of whether rom is different? I know you have nothing to do with it, but I have spent all my savings on this device and need to work out a way to recover it.
Thanks Huffy :good:
landognr said:
Hello guys,
After an update to android 7.0 my cell phone started to show difficulties to load. When I connect it on it gives the following message: Caution: High temperature of the device.
This happened after I updated the firmware to the latest version. I wonder if it is to restore the system and go back to version 6.0 of android?
Thank you all,
Best regards
Lando
Click to expand...
Click to collapse
Did you success?Have you unlock the bootloader of your phone?unlock is necessary!(even though somebody say it work on locked phone)
Here come the tip from Taiwan forum~
link
samson1357924 said:
Did you success?Have you unlock the bootloader of your phone?unlock is necessary!(even though somebody say it work on locked phone)
Here come the tip from Taiwan forum~
link
Click to expand...
Click to collapse
Yes, The bootloader was already unlocked before the problem happened on my phone. I dont think you really understood my problem. What I need is to recover the bootloader from my device.
You said: wonder if it is to restore the system and go back to version 6.0 of android?
So I give you the way to downgrade~It’s not difficult.
I don't know that you had brick your phone......
samson1357924 said:
You said: wonder if it is to restore the system and go back to version 6.0 of android?
So I give you the way to downgrade~It’s not difficult.
I don't know that you had brick your phone......
Click to expand...
Click to collapse
Will QuickCharge 3.0 work again if you return to Android 6 (given that it was removed in Android 7)?
AWT86 said:
Will QuickCharge 3.0 work again if you return to Android 6 (given that it was removed in Android 7)?
Click to expand...
Click to collapse
It was never removed it works fine on Android 7.0. Sometimes you have to factory reset your phone to get it working after an upgrade.
You do have to use the supplied ASUS charger though which is really annoying to get qc3.0 speeds. Other qc certified quick charge 3.0 will only charge at normal speeds. Something Asus have blocked themselves.
Need help here,
So, i flashed .eu 9 on Mi6, all went normally, all good, i put it in the charger at night.
In the morning of today, i woke up with my phone DEAD connected in the charger (the original with original cable)
When i connect in any charger, the notification LED blinks, BUT MY PHONE DOESN'T TURN ON, IT DOESN'T BOOT! No matter what button i press
When it's not on the charger, he does nothing.
Can someone tell WTF happened and how to solve this?
I'm exactly at the same situation.
Hardbricked after Miui9 update.
Device is detected as Qualcomm HS-USB QDLoader 9008 on PC, but Miflash fails with errors:
- cannot receive hello packet
- try to reset status
Any help is appreciated!
Thanks in advance :good:
BPSoft said:
I'm exactly at the same situation.
Hardbricked after Miui9 update.
Device is detected as Qualcomm HS-USB QDLoader 9008 on PC, but Miflash fails with errors:
- cannot receive hello packet
- try to reset status
Any help is appreciated!
Thanks in advance :good:
Click to expand...
Click to collapse
Hi
try to download one of the tools from this link http://forum.gsmdevelopers.com/showthread.php?t=24421
if you keep having this error just use another version.
hac12 said:
Hi
try to download one of the tools from this link http://forum.gsmdevelopers.com/showthread.php?t=24421
if you keep having this error just use another version.
Click to expand...
Click to collapse
Thank you!
I resolved my issue disabling driver signature enforcement and reinstalling qualcomm drivers that come with Miflash.
For further instructions please follow this link:
https://www.howtogeek.com/167723/ho...so-that-you-can-install-unsigned-drivers/amp/
In my case was important to do it even if windows device manager recognize my device correctly, and miflash detected my mobile.
Clean flash via mi flash tool
MI 6 cihazımdan Tapatalk kullanılarak gönderildi
Mods please close this thread
My MI6 is officially hard bricked and there's no repair.
I'm sending it back to china
BPSoft said:
Thank you!
I resolved my issue disabling driver signature enforcement and reinstalling qualcomm drivers that come with Miflash.
For further instructions please follow this link:
https://www.howtogeek.com/167723/ho...so-that-you-can-install-unsigned-drivers/amp/
In my case was important to do it even if windows device manager recognize my device correctly, and miflash detected my mobile.
Click to expand...
Click to collapse
BPSOFT which rom you used my mi6 is in Dead brick mode and would like to recover it
XeeXa said:
BPSOFT which rom you used my mi6 is in Dead brick mode and would like to recover it
Click to expand...
Click to collapse
To use Mi Flash Tool you need to download Fastboot ROM. The Fastboot ROM extension's file are .tar, .gz*or.tgz.
But if you bootloader is still locked you need to boot in EDL mode, not fastboot mode.
More info at:
https://xiaomifirmware.com/guides-and-tips/guide-flash-miui-rom-xiaomi-mi6/