Related
What is the file location of the bluetooth xml or address file on the Fire TV?
trying to connect PS3 DualShock 3 SixAxis controller to Fire TV
Tried using SixAxis app, no root yet
Connected via adb, but having trouble finding file location of bluetooth xml or address
Tried netcfg , non of the interfaces looked like bluetooth (p2p0, lo, eth0, wlan0, ...)
Need help finding bluetooth MAC address of the console
I saw in the general forum that the PS3 wired controller is listed as working, not sure if this is the same. Tried my with wired USB connection, not working for me
I think they mentioned the ps4 controller
Sent from my iPhone using Tapatalk
Try
Code:
cat /data/misc/bluedroid/bt_config.xml
Should get something back, look for something like
Code:
<N1 Tag="Local">
<N1 Tag="Adapter">
.....
<N2 Tag="Address" Type="string">bd:h5:cb:46:h4:86</N2>
towards the top of the file.
PS3 Controller pairing
arhada said:
What is the file location of the bluetooth xml or address file on the Fire TV?
trying to connect PS3 DualShock 3 SixAxis controller to Fire TV
Tried using SixAxis app, no root yet
Connected via adb, but having trouble finding file location of bluetooth xml or address
Tried netcfg , non of the interfaces looked like bluetooth (p2p0, lo, eth0, wlan0, ...)
Need help finding bluetooth MAC address of the console
I saw in the general forum that the PS3 wired controller is listed as working, not sure if this is the same. Tried my with wired USB connection, not working for me
Click to expand...
Click to collapse
Where di I find more info on pairing my PS3 controller to the Fire TV?
dot19408 said:
Where di I find more info on pairing my PS3 controller to the Fire TV?
Click to expand...
Click to collapse
At this time it isn't possible. People have looked into it and I guess it's something to do with the pin pairing mechanism not being compatible with the current HID on the fire tv? Dualshock 4 controller does work, but the buttons map weird.
Has anyone given this a shot since we got root?
to0 said:
Has anyone given this a shot since we got root?
Click to expand...
Click to collapse
Work! http://www.youtube.com/watch?v=6AtlDC6B4QY
Care on sharing how?
Sent from my iPhone using Tapatalk
Esso1001 said:
Care on sharing how?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
https://github.com/Redth/FiredTVLauncher/releases/tag/1.0.3
note this was just 3 days ago before root was acquired.
the youtuber was using fired tv launcher and was running an app called sixaxis controller
rp201 said:
https://github.com/Redth/FiredTVLauncher/releases/tag/1.0.3
note this was just 3 days ago before root was acquired.
Click to expand...
Click to collapse
That was yesterday.
source: http://amazon-tv.ru/podklyuchenie-ps3-dualshock-3-k-amazon-fire-tv/
translate.google.com
1. Download and install the program on your computer SixaxisPairTool.
2. DualShock 3 Connect to a computer USB-cord and wait for the automatic installation of the driver.
3. SixaxisPairTool Start and wait until the displayed MAC-address in the format xx: xx: xx: xx: xx: xx
4. Download and install the program Sixaxis Controller on Amazon Fire TV.
5. Run Sixaxis Controller and go to settings - go to Settings-> Joystick-> put check mark on Enable Joystick.
6. Now click Start, the program will ask Ruth right and below you will see the Local Bluetooth Address, too, in the format xx: xx: xx: xx: xx: xx
7. SixaxisPairTool Enter it in the computer field and click Change Master Update. Then unplug the controller from the computer.
8. Turn on the controller button PS (round the middle)
9. Your joystick should work, and the screen will show that the joystick is connected 1.
Click to expand...
Click to collapse
FireTV does not sleep after connecting DualShock 3!
Deimozzz said:
That was yesterday.
source: http://amazon-tv.ru/podklyuchenie-ps3-dualshock-3-k-amazon-fire-tv/
translate.google.com
FireTV does not sleep after connecting DualShock 3!
Click to expand...
Click to collapse
excellent! deimozzz
I also had to "stop" the sixaxis service and use my firetv remote and select the "menu" button on the remote and then from the screen select"preferences" "gamepad settings" and check "enable gamepad" exit back and then start the service.
worked fine the menus... now I have to test it games
Any more luck with the ps3 controller???
Sent from my iPhone using Tapatalk
Esso1001 said:
Any more luck with the ps3 controller???
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
ps3 controller works great.. only thing that sucks is the controller stays on and the fire tv doesnt go to sleep.
i was able to play GTA San Andrea's no problem
This works great!
I played these games so far and they work fine with the controller.
Asphalt 8
Dead Trigger 2
Shadow Fight 2
Does anyone know how to turn off the controller?
After connecting the ps3 controller can we disable the service to have the ftv sleep and turn it on when needing the controller?
A little help, if you please.
So I've managed to successfully pair the PS3 controller to the FTV, however, it seems to have issues with up and left, as they are nonresponsive. I did get the correct MAC address for both the FTV and the PS3 controller. I can navigate menus and launch apps, however some of the controls are not working correctly. If anyone has had a similar problem, please let me know how to resolve this.
thrashman69 said:
Does anyone know how to turn off the controller?
Click to expand...
Click to collapse
you can press and hold the center button for 10 secs. forces it to turn off.
mejdam said:
you can press and hold the center button for 10 secs. forces it to turn off.
Click to expand...
Click to collapse
Cool I'll try that
will someone who has successfully connected a ps3 controlled to fire tv please post a step-by-step? i've tried following the russian translated instructions but i'm not having any success at this point.
with the sixaxis tool on the fire tv, i usually get to the point where it says 'listening for controllers' after i start it and the fire tv freezes
any help is appreciated!
Hi everyone,
I've searched all over but can't find the answer. I've used the sixaxis app on many devices before. It doesn't seem to work on the tab s, and I believe it is because newer Samsung devices are missing a certain Bluetooth protocol.
My goal is to connect two PS3 controllers to the Tab S to play emulated games (nes, snes n64,etc.)
Does anyone have any information on how to get it working? Thanks!
maneetb said:
Hi everyone,
I've searched all over but can't find the answer. I've used the sixaxis app on many devices before. It doesn't seem to work on the tab s, and I believe it is because newer Samsung devices are missing a certain Bluetooth protocol.
My goal is to connect two PS3 controllers to the Tab S to play emulated games (nes, snes n64,etc.)
Does anyone have any information on how to get it working? Thanks!
Click to expand...
Click to collapse
I tried all the tricks I know, to no avail, it's really hard to make it work, unless you're willing to do it 'oldschool' style, wired via OTG.
we managed to do this in samsung tab 3 before, 2 PS3 controllers for 2 player fighting games, dunno, seems like we have bluetooth compatibility issues as the PS3 bluetooth is already outdated.
let's here other chime in
what ? sixaxis controller works perfectly on my tab s 10.5 :v no issue . even with wire
Works on my 8.4 too.. have you tried the compatibility checker first ? It only worked after I used it once
Sent from my SM-T700 using XDA Premium 4 mobile app
better33 said:
Works on my 8.4 too.. have you tried the compatibility checker first ? It only worked after I used it once
Sent from my SM-T700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you dont need to install that app , just set the host IP for the controller and play . that's all
Well, like I said, didn't work until I tried that. Can't tell why though, never had too before. But I tried it since I remember a while ago, sense and touchwizz used to be not compatible with sixaxis app
Sent from my LG-D802 using XDA Premium 4 mobile app
screenshots...method...controller type?
sku|| said:
what ? sixaxis controller works perfectly on my tab s 10.5 :v no issue . even with wire
Click to expand...
Click to collapse
better33 said:
Works on my 8.4 too.. have you tried the compatibility checker first ? It only worked after I used it once
Sent from my SM-T700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok, wait...so are both of u guys saying that u have a PS3 controller working through BLUETOOTH with the tab S?! If so then could one of u please provide a screenshot as proof and describe your connection method...did u use the pc program or bond with an otg cable through the sixaxis app then pair and what version of the sixis app are u using? Also..are u using original oem sony controllers or ebay branded ones? :confused
:
@better33
to answer all of the basic questions...yes i'm rooted & yes i've used the app before successfully most recently on the tab pro 8.4 . i really need the above questions i posed to the poster above answered...also as @sku|| suggested i doubt if the compatibility checker helps but yes i've tried that too. Thx for the screenshot though...are u using original sony controllers and more importantly what version of the sixaxis app are u using?
Like I said, it wasn't working the first time, so I downloaded the compatibility checker since I remember there used to be issues with touchwizz, and it said it was compatible. I'm using the official ps3 controller. Are you root ?
Forgot to say, I connected the controller on my computer to change the master address and then connected it through Bluetooth
Sent from my SM-T700 using XDA Premium 4 mobile app
THEDEVIOUS1 said:
ok, wait...so are both of u guys saying that u have a PS3 controller working through BLUETOOTH with the tab S?! If so then could one of u please provide a screenshot as proof and describe your connection method...did u use the pc program or bond with an otg cable through the sixaxis app then pair and what version of the sixis app are u using? Also..are u using original oem sony controllers or ebay branded ones? :confused
:
@better33
to answer all of the basic questions...yes i'm rooted & yes i've used the app before successfully most recently on the tab pro 8.4 . i really need the above questions i posed to the poster above answered...also as @sku|| suggested i doubt if the compatibility checker helps but yes i've tried that too. Thx for the screenshot though...are u using original sony controllers and more importantly what version of the sixaxis app are u using?
Click to expand...
Click to collapse
I'm using the 0.7.4 version, what else do you need?
Hmm interesting. What rom version are you using? It could be regional issue?
---------- Post added at 12:55 AM ---------- Previous post was at 12:51 AM ----------
better33 said:
Like I said, it wasn't working the first time, so I downloaded the compatibility checker since I remember there used to be issues with touchwizz, and it said it was compatible. I'm using the official ps3 controller. Are you root ?
Forgot to say, I connected the controller on my computer to change the master address and then connected it through Bluetooth
Sent from my SM-T700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im using 2 official controllers here, one that came with the ps3 that I used on my tab 7.7 with no issues (bluetooth) . And another aftermarker pink controller that I also used with no issues with tab 7.7. Only thing devious and I have in common might be our custom rom which he compiled
I tried connecting it through PC and change the mac address via sixaxis changer. Installed the compatibility checker and eas advised that it's compatible. Bought the sixaxis app. And.. boom. Stuck at 'listening to controllers'. I'll give it a shot once again
maneetb said:
Hi everyone,
I've searched all over but can't find the answer. I've used the sixaxis app on many devices before. It doesn't seem to work on the tab s, and I believe it is because newer Samsung devices are missing a certain Bluetooth protocol.
My goal is to connect two PS3 controllers to the Tab S to play emulated games (nes, snes n64,etc.)
Does anyone have any information on how to get it working? Thanks!
Click to expand...
Click to collapse
I'm having the same issue in my rooted Tab s 10.5. I changed the master to my tablet, then the tablet never sees the controller. Any luck?
Uhhh. Dunno what I did but.. it worked.
Heres what I remembered.
Uninstalled sixaxis.
Downloaded compatibility checker and run
-hooked up my controller via otg and manually typed my bluetooth MAC
Installed Sixaxis
-tried pairing via OTG. Disconnect cable and tried pairing via BT: unsuccessful
*frustrated*
Killed app compatibility checker
Killed app sixaxis
Reopened sixaxis
Clicked change IME - list of keyboard appeared. Tapped sixaxis
Clicked start. It connected.
Mine is :
1. Have a DS3 controller
2. Have a cable and OTG
3. Connect DS3 via OTG
4. Open sixaxis controller app ( v0.7.4)
5. Tap PAIR
6. Disconnect the controller
7. Change IME
8. Tap Start and connect with DS3
9. Done
ThE_SoUrCe said:
Clicked change IME - list of keyboard appeared. Tapped sixaxis
Clicked start. It connected.
Click to expand...
Click to collapse
Actually I remember doing that too (changing the IME BEFORE looking for devices), maybe that's why it worked for me. I'm on the last stock French rom, can't tell you more I'm at work without the tab.
Sent from my LG-D802 using XDA Premium 4 mobile app
I got it working on Tab S by changing IME to sixaxis > then go to "set up input methods" > made sure sixaxis is checked > into its general settings , checked auto start > then into game setting checking "enable gamepad. Presto!!
Hi everyone,
Thanks for all the feedback! I am trying very hard to replicate the steps, but I still can't get past the "Listening for controllers" status.
Can anyone please delete all of the six axis settings, and post detailed step by steps from scratch?
Also, I noticed my bluetooth button isn't lit up (indicating that it is on) when I start Sixaxis. And when I try to turn it on, it doesn't.
Thanks for your help!!
maneetb said:
Hi everyone,
Thanks for all the feedback! I am trying very hard to replicate the steps, but I still can't get past the "Listening for controllers" status.
Can anyone please delete all of the six axis settings, and post detailed step by steps from scratch?
Also, I noticed my bluetooth button isn't lit up (indicating that it is on) when I start Sixaxis. And when I try to turn it on, it doesn't.
Thanks for your help!!
Click to expand...
Click to collapse
Wait, you guys are right.... it is totally random, but I got it working! This time, I did retype the bluetooth address manually and clicked pair (even though it looked the same). Then, it still didn't work. Then I tried it with my regular swiftkey input, and it connected! Then I switched it to six axis.
This was the reason I bought the tablet, so THANK YOU guys for the help (even though we are still kind of puzzled )
I got another simpler method that works, so far so good,
-Force close all sixaxis apps (compatibility checker and sixaxis)
-at the back of the controller, there's a reset button, insert anything small enough and reset it
-connect the controller to your device via OTG
-run sixaxis controller app
-tap pair, then tap pair (the one on pop up)[ensure the bluetooth address is correct]
-disconnect OTG
-turn the controller on
-tap Start.
and there you have it.
edit:
and it will not work again as soon as you paired your device to your Samsung Gear LOL..
what you need to do, after using your Samsung Gear, disconnect it, reboot your device and follow the instructions above, it will sync once again
ThE_SoUrCe said:
I got another simpler method that works, so far so good,
-Force close all sixaxis apps (compatibility checker and sixaxis)
-at the back of the controller, there's a reset button, insert anything small enough and reset it
-connect the controller to your device via OTG
-run sixaxis controller app
-tap pair, then tap pair (the one on pop up)[ensure the bluetooth address is correct]
-disconnect OTG
-turn the controller on
-tap Start.
and there you have it.
edit:
and it will not work again as soon as you paired your device to your Samsung Gear LOL..
what you need to do, after using your Samsung Gear, disconnect it, reboot your device and follow the instructions above, it will sync once again
Click to expand...
Click to collapse
I got it working perfectly yesterday, but couldn't get it today. I tried your steps over and over again, but no luck!
Any way you can post a video? I will be very thankful to the person who can get this working for me! It is frustrating that it worked yesterday flawlessly with two controllers, but only after hours of messing with it (and it isn't working today!)
maneetb said:
I got it working perfectly yesterday, but couldn't get it today. I tried your steps over and over again, but no luck!
Any way you can post a video? I will be very thankful to the person who can get this working for me! It is frustrating that it worked yesterday flawlessly with two controllers, but only after hours of messing with it (and it isn't working today!)
Click to expand...
Click to collapse
I was about to edit my post for the nth time LOl. Sad to say. I does not work again. I was simply lucky that I managed to do it 3 times in a row. Now. It simply doesnt pair. Could be something messing with the bluetooth becuase once you get it to pair initially. Even if you reboot, it would still pair. But once you connect your device to another bluetooth device such as headset/gear. BT will forget the sixaxis profile and you'll have trouble syncing it again. I'm close to giving up. I'm simply using it with USB OTG just to satisfy my game-cravings. Hope the others who got it working chime in once again if they manage to pair it all the time.
Hi ,
I'm on a rooted ZenFone 2 trying to connect a Dualshock 3 to play games.
So far with sixaxis controller apk and after some tweaking I've been able to play games that accept controllers.
On the other hand when using sixaxis controller's touch profiles or tincore keymapper they both crash and reboot the whole system if I press two buttons at once .
Please show me how to log this in order that you have a better idea or try to recreate this.
I've done this over OTG ( no sixaxis controller APK running ) with similar results.
If someone has something else rather than a DS3 and got something like this working let me know.
I have the exact same problem and i cant find a fix
Made a logcat a few days ago and found this line when searching for fatal.
[ 08-27 00:19:26.172 642: 753 F/libc ]
Fatal signal 11 (SIGSEGV), code 1, fault addr 0x28 in tid 753 (InputReader)
Click to expand...
Click to collapse
More information on phone:
WW-ASUS_Z00A-2.19.40.22 rooted using 1 click method found in forums. Won't unlock bootloader to go AOSP if im not 99% sure this is fixed.
Can't post links because I haven't reached the minimum posts required. There is already someone with the same issue as me and a bit more information. I am fearing this issue is related to how Sixaxis Controller, Intel and the kernel don't really like to play along with each other.
How to recreate:
1. Use sixaxis controller to connect DS3 to phone. The inputs have to be reprogrammed in gamepad settings for games that have native control support. Not seamless but good enough.
2. Create a touch profile for a game that doesn't have support. There are various Youtube videos showing how it's done. Set the active profile and load the game.
3. Everything seems to work.... Unless you press two buttons at once. It goes back to the ASUS screen.
I just need to know if someone is interested in recreating this with a DS3 controller or at least try with another controller and do keymaps for non controller compatible games or apps and see if it restarts. If it works and doesn't crash with another controller please let me know. XBOX, MOGA, DS4 it doesn't matter.
Exact same problem here. Awaiting fix. Gonna try tweaking app settings see if it works.
bump
I have the same problem too ...
This happen when it connects wireless and when you press any button it will restart but if you connect it via OTG it won't crash nor restart your phone.
All I did was format my phone, install Six Axis Controller APK connect via wireless and I didn't crash since then.
How to FIX
Sory for my English.
You need change settings. Settings -> Devices: Touchscreen -> Touch output device -> "ftxxxx_ts" (or another, but not "tincore_mt").
[email protected] said:
Sory for my English.
You need change settings. Settings -> Devices: Touchscreen -> Touch output device -> "ftxxxx_ts" (or another, but not "tincore_mt").
Click to expand...
Click to collapse
Wow!! I was facing the same issue with my rooted asus zenfone 5 and tincore keymapper. This fix sure does work!! Thanks a ton due!
einst31n said:
Wow!! I was facing the same issue with my rooted asus zenfone 5 and tincore keymapper. This fix sure does work!! Thanks a ton due!
Click to expand...
Click to collapse
i'm also experiencing same problem with my Asus Zenfone Max .. i can't find wheres that setting you mean dude .. please help .
SenpaiCham said:
This happen when it connects wireless and when you press any button it will restart but if you connect it via OTG it won't crash nor restart your phone.
All I did was format my phone, install Six Axis Controller APK connect via wireless and I didn't crash since then.
Click to expand...
Click to collapse
i'll try Formatting/factory reset my android phone . still rebooting .. my unit is zenfone max ..
zefone 5e
Same problem to my zen5.
Hello, I've recently bought a PS4 controller and I successfully paired it with my phone but the problem is that it doesn't detect any key presses... I've tried the same controller on PC and another phone (running Android KitKat) and it's working fine.
Is this a software issue? How can I fix it? Have anyone tried this too?
Up. Anyone could test this with at least any Bluetooth controller? I heard that s10 had a similar issue and it got solved by an update.
Stanwar said:
Hello, I've recently bought a PS4 controller and I successfully paired it with my phone but the problem is that it doesn't detect any key presses... I've tried the same controller on PC and another phone (running Android KitKat) and it's working fine.
Is this a software issue? How can I fix it? Have anyone tried this too?
Click to expand...
Click to collapse
Most devices just don't have the keylayout files for controllers. Unfortunately, there's no easy way to make them work.
If you have magisk, there's a module called 1controller which you can just install to get that file.
If you don't, I also have the specific file you need to get into /system/etc/keylayout, but obviously, you're gonna need root for that.
I'm having the same problem too.
can you please upload a link
my gamesir g4 works fine
Stanwar said:
Hello, I've recently bought a PS4 controller and I successfully paired it with my phone but the problem is that it doesn't detect any key presses... I've tried the same controller on PC and another phone (running Android KitKat) and it's working fine.
Is this a software issue? How can I fix it? Have anyone tried this too?
Click to expand...
Click to collapse
The default connection via bluetooth using Playstation controllers doesnt work. Or it doesnt fully work at least. I have experienced it on my ps3 and PS4 controller. The only way a controller works is from a Bluetooth Controller made for Android. Or if you really want to use PS controller, you need an app called Sixaxis Controller.
If your phone is not rooted, the only way to do it is by using sixaxis and connect the PS controller directly via Wire. The sixaxis for the wired and wireless are different so dont buy it on the playstore right away
If you have rooted Access, then you can connect it wirelessly bia the sixaxis app.
Only then it will work as it should be.
The thing is, it actually works with my low-end tablet. So why not with this expensive phone?
Works fine with my Xbox One controller. Son uses it to play minecraft...
stillriza said:
Works fine with my Xbox One controller. Son uses it to play minecraft...
Click to expand...
Click to collapse
Wired or wireless?
Actually, after September update, I just tried to controller again and it's perfectly working through bluetooth.
Xbox One controller works fine via bluetooth, buttons are already mapped.
Stanwar said:
The thing is, it actually works with my low-end tablet. So why not with this expensive phone?
Click to expand...
Click to collapse
I dont know what tablet it is but it might be a feature of the tablet. Ps4 controllers have D-Input mapping while android works natively with X-input controllers. Xbox controllers work right away as it works under X-Input
Sixaxis converts that input to a readable input for the android if youll use a ps4 controller.
Edit: good that you had it working.
I am on the latest version of FIre OS (5.2.7.2_r1) and am using a first party PS3 controller, the version with Dualshock and Sixaxis combined
I know this question has been asked and ansered before, but the methods I have tried to use have not worked for me, sadly.
I have tried Using Sixaxis Controller from DancingPixelStudios. I enable and set the IME from a terminal (cannot get a Settings.apk to install) I have set the Bluetooth Master Address both from the USB pairing method built into the app, and with Sixpair on a linux machine (a raspberry pi running the latest version of Raspbian) Stort the server and try to connect, nothing.
I tried the app Sixaxis Enable, which is supposed to connect the DS3 via USB, and I get a message saying that it's not supported.
I found an app called USB/BT Joystick Center. After setting the IME for it and connect my controller via USB, and when I click Search in the app, it finds the Unifying receiver, the powered USB hub I am using (I think) and the PS3 controller. It says that I click on it and it says that it loads a built in keymap or something along those lines, but the controller doesn't work...Maybe I just don't really know how to use the app properly, but so far the help option hasn't actually been much help. It says that if I want to use my PS3 controller over bluetooth, that I will need to connect an external USB Bluetooth Dongle with a CSR chipset (which I don't have)
Something interesting I have noticed, is that I have been getting a pop up request to enter the pin for my controller. I have tried 0000 and 1234, to no avail., Using an app called Bluetooth Settings, I currently have my device set to be fully discoverable and pairable.. What I can take away from this is that my box IS seeing the PS3 controller over bluetooth.
It kinda seems to me like all the methods available to do connect a PS3 controller to the FIre TV are all dead, or I'm doing something wrong, which is more than possible.
So I guess my question is, is there a way nowadays to use my official PS3 controller on my FIre TV? I have no real preferece if it is over USB or Bluetooth. (Unless I have company over Iam usually no further than 5 feet away from the box when I use it) and how do I acheive it if it can still be done?
THank you for the patience!
LazorBlind said:
I am on the latest version of FIre OS (5.2.7.2_r1) and am using a first party PS3 controller, the version with Dualshock and Sixaxis combined
I know this question has been asked and ansered before, but the methods I have tried to use have not worked for me, sadly.
Click to expand...
Click to collapse
I feel your pain...
I also had this issue literally tried everything... I moved on and accepted it wasn't going to work, so purchased Bluetooth controllers.. Which would also not pair.. Til I ran a simple command...
https://forum.xda-developers.com/fire-tv/help/guide-pair-undetected-bluetooth-devices-t4023677
CFKod said:
I feel your pain...
I also had this issue literally tried everything... I moved on and accepted it wasn't going to work, so purchased Bluetooth controllers.. Which would also not pair.. Til I ran a simple command...
https://forum.xda-developers.com/fire-tv/help/guide-pair-undetected-bluetooth-devices-t4023677
Click to expand...
Click to collapse
Funny enough, I actually just recently found your reddit posts about this while looking for something else. Sadly it did not work for me that I know of.
After running your command via adb, my terminal gave me:
"Result: parcell(00000000 00000001 '........')"
Then I went to the Bluetooth menu, pressed the PS button on my PS3 controller, and tried to discover it as both a game controller, and under Other Bluetooth Devices.
Maybe im not doing something right, or maybe because I have the bluetooth master address in the controller set to the Fire's bluetooth MAC address, the fire thinks it is paired when it is not.
Further help would be appreciated if you know what im doing wrong with that method.
The good news though is that I HAVE discovered (or at least there are no nentions about it that I have seen) a method to use an official ps3 controller over USB, and will post a tutorial sometime in the next 24 hours.
Do you have busybox installed? Try it via the terminal emulator app on the device itself.
Also it sounds like you need to pair it again... In the settings forget the device. Then
CFKod said:
Do you have busybox installed? Try it via the terminal emulator app on the device itself.
Also it sounds like you need to pair it again... In the settings forget the device. Then
Click to expand...
Click to collapse
Busybox is installed to /system/xbin
After trying to run the command in the terminal emulator included in Apps2SD Pro, I got the same response from the terminal and I still couldn't detect the controller over bluetooth.