I have a new cover from a popular China e-shop, but
how to glue it back ? What kind of glue it should be?
thanks in advance!
-------
Edit:
Some back covers are sold with the glue already applied,
like on a sticker.
Thread can be closed as solved.
Related
Has anyone removed the Metal LCD Cover Plate from the Exec? My one has a few dents in it and I want to debrand it. I have a Milling machine at work that I can use to cut myself a new plate, all I need too do I work out how to remove the old one without damaging the the rest of the cover.
D.Apsley said:
Has anyone removed the Metal LCD Cover Plate from the Exec? My one has a few dents in it and I want to debrand it. I have a Milling machine at work that I can use to cut myself a new plate, all I need too do I work out how to remove the old one without damaging the the rest of the cover.
Click to expand...
Click to collapse
hi
i have your problem but i contrite for removing that(after removing it geting worse) since i haven't laser cutter or milling machine i cant do any thing and i forced to stik lather instead of metal
i recomend you if you want to do that embed a tiny knife or blade betwen the plastic part and metal plate if you use long knife it better embed it far as you can (becareful you may cut your hand / scratch plastik part use a piece of cloth to prevent this) then rotate the knife or pull it up-> (use two khife at the same for pulling up) and be careful the plate maybe lost her face
sorry for my bad English
i hope these are usefull for you
Sounds just like I suspected the Metal cover plate is stuck down with a double sided tape then.
Nice idea the leather, could add some protection.
Hi !
I am not REALLY sure, if this can help you, but I think so. I do not remember, where I found this, but it helped me, when I had to exchange the front cover of my Universal some months ago...
http://rapidshare.com/files/114813770/mda_pro_service_manual.pdf.html
I hope this helps !
Cheers,
Otto
I've got this manual already, what I what to do is remove the metal plate fitted in the centre of the top cover. Basicaly I want to de-brand my XDA uni form the Mobi operator and to pimp my XDA Uni.
The manual only gives info on removal of the complete top cover but not the metal plate.
Hello, as you can read in the threadname, my question is, if the z1 compact has a anti shatter film on its backside. And does anybody know wich material it is. Plastic or glass? I own the european model.
Thanks a lot
European version has plastic... And there is no any anti shutter sadly you need to remove back plastic panel of you want change
Unfortunately I have tried to peel the film. So the bravo of my phone looks very ugly. Now I have to order a new backcover for assembly. Any tips or tricks about it. I know there are many videos,but..... I am a little bit angry about the water resistant of the phone,if I assemble the backcover.
Film is included an preinstalled on the inner surface of the backcover. That's good to know.
Once again any tips or tricks?
Thanks allot
Only advice from me is that you should go to company which is official service and check how much it will costs to change backpanel (you should by glass one) it will do on warranty and should keep water resistant(I think) but you can give it a try if you have something that in your city
Maybe putting on something like that is an alternative: http://m.ebay.de/itm/121335821880 I find it quite beautiful on mine, optically as well as haptically.
AlexandreVegetaroux said:
Unfortunately I have tried to peel the film. So the bravo of my phone looks very ugly. Now I have to order a new backcover for assembly. Any tips or tricks about it. I know there are many videos,but..... I am a little bit angry about the water resistant of the phone,if I assemble the backcover.
Film is included an preinstalled on the inner surface of the backcover. That's good to know.
Once again any tips or tricks?
Thanks allot
Click to expand...
Click to collapse
- Make sure the plastic frame surround does not lift at all along with the back, or you'll end up ****ing the frame glue and it's goodbye waterproofing and hello phone that creaks when you hold it
- There's a reason why professionals use an evenly heated flat surface - hairdryers/heatguns/similar will increase your chances of ****ing the frame glue
- Use isopropyl or similar to get the internal surface absolutely clean
- Heat it again slightly after applying the new back
- Apply loads of pressure (eg put it under some books)
- After it's all dried, make sure you can't lift the back AT ALL if you put your fingernail in the groove above the LED flash. If it lifts you will end up with a foggy camera lens from normal use and a ****ed phone if you expose it to water
I accidentally broke the back glass of my phone .. And ordered a new one thinking that it was the complete back cover.. But instead it was just a flat "thing" with a sticker (maybe adhesive) on it... I've no idea on how to replace it .. This is how it looks but white(pics attached)
http://www.ebay.com/itm/Battery-Bac...-LG-Optimus-G-E975-Repair-Tools-/191295006920
you have to "peel" the old off and glue this one there!
iakoboss7 said:
you have to "peel" the old off and glue this one there!
Click to expand...
Click to collapse
how do I peel it...
I finally did it.. Warmed it using hair dryer and heat blower.. And peeled it using my nails and a hair clip..
Hi Guys,
I ordered the sandstone back cover with the 5t as I read on the oneplus forums that the back cover that comes with the phone removes or messes up the paint. TBH the sandstone one sucks too. Is there a cover that does not mess up with the phone's body? Also is there any good tempered glass which can be applied even if there is a cover?
Thanks
billubakra said:
Hi Guys,
I ordered the sandstone back cover with the 5t as I read on the oneplus forums that the back cover that comes with the phone removes or messes up the paint. TBH the sandstone one sucks too. Is there a cover that does not mess up with the phone's body? Also is there any good tempered glass which can be applied even if there is a cover?
Thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-5t
Hello,
my Mi 10 fall down and the battery back cover broke at two places. i used a case but i doesn´t help.
Now it want to replace it, but only the same back covers with glass are available
like this > aliexpress.com/item/1005003324600244.html
But i´m searching for a cover made of metal or similar. my phones before i use without case.
I´m searching aliexpress but only find glass back covers. no other available?
Thanks for help.
Regards from Germany
I also searched, but only glass available right now
Get new back glass, and search for a solid cover to protect it
As this device is no more with me ,zlIam leaving this forum .
As this device is no more with me ,zlIam leaving this forum .