I came esta upgrade and had previously rooted and will not let me install I put the official says recovery not fail me
cm 13.1- znh2kas254 incremental
vickmen said:
I came esta upgrade and had previously rooted and will not let me install I put the official says recovery not fail me
cm 13.1- znh2kas254 incremental
Click to expand...
Click to collapse
You tried to install cm 13.1-znh2kas254 from recovery?
Which recovery?
What rom did you have before you tried update?
Did you wipe system, cache, dalvik, data?
What was exact error message or symptoms?
Related
I have my At&t galaxy s3 rooted and I have installed jellybro ROM.
Today I updated it to "cm-10-20120909.1404-d2att" version using goo manager. Install went well but after that it keeps running into boot screen. I tried to install CWM using Odin but it just goes into Samsung's recovery. Any idea how can I reinstall older ROM?
Also I tried to post into its ROM's forum : http://forum.xda-developers.com/showthread.php?t=1806921&highlight=jellybro but XDA doesn't allow me because I am *new*.
Thanks in advance.
After you flashed CWM, are you holding volume UP instead of DOWN to get into recovery mode?
Medlock87 said:
After you flashed CWM, are you holding volume UP instead of DOWN to get into recovery mode?
Click to expand...
Click to collapse
Thanks, that helped. Now I am in CWM.
But When I try to flash one of the backup zip (downloaded from goo-manager), it gives me error:
assert failed: getprop("ro.product.device") == "d2att"
Now How can I transfer zip that can work with CWM or how can I get CWM to install this zip?
Thanks again
I don't understand. Get the zip for the CM10 nightly, format data/factory reset, wipe cache/dalvik, then install the CM10 zip along with gapps. Always wipe data if you're having problems with a new ROM.
Medlock87 said:
I don't understand. Get the zip for the CM10 nightly, format data/factory reset, wipe cache/dalvik, then install the CM10 zip along with gapps. Always wipe data if you're having problems with a new ROM.
Click to expand...
Click to collapse
Finally got it. Issue was that I was using older CWM (5.5.X.X) version with newer ROM. So I had to download newer CWM and flash it. Since clockworkmod website was down it was difficult to get the newer version. Finally found CWM 6.X version, flashed it and rebooted. Thanks for your help.
No problem! Glad you got it figured out! :good:
Whoops, wrong section... Move perhaps?
What i'm experiencing:
Update fails, just throws a (bad) on me.
Trying to upgrade recovery to 6.0.3.6 and no success.
Any help?
General rules make a read everything make a back up wipe data wipe cache wipe dalvik cache flash ROM and then gapps these are just basic instructions read everything again in the post just to be safe
helstonrampersad said:
General rules make a read everything make a back up wipe data wipe cache wipe dalvik cache flash ROM and then gapps these are just basic instructions read everything again in the post just to be safe
Click to expand...
Click to collapse
Won't work. The recovery stops the installation, installation aborted (bad)
When that happens to me its usually of a bad download or a file that isn't compatible try downloading the files again it might work
Same Problem
helstonrampersad said:
When that happens to me its usually of a bad download or a file that isn't compatible try downloading the files again it might work
Click to expand...
Click to collapse
Just got my tmo GS2. I have 4.1.2 and twrp recovery 2.4.4.0. EVERY SINGLE ROM i try to flash it just fails says cannot open zip (bad) Very irritating. Any fixes? Try clockwork? Flash older update?
railinandnailin said:
Just got my tmo GS2. I have 4.1.2 and twrp recovery 2.4.4.0. EVERY SINGLE ROM i try to flash it just fails says cannot open zip (bad) Very irritating. Any fixes? Try clockwork? Flash older update?
Click to expand...
Click to collapse
You're on the wrong recovery. Change to CWM 6.0.3.7 NON TOUCH and it work.
Before you ask anything, only use that recovery listed above.
railinandnailin said:
Just got my tmo GS2. I have 4.1.2 and twrp recovery 2.4.4.0. EVERY SINGLE ROM i try to flash it just fails says cannot open zip (bad) Very irritating. Any fixes? Try clockwork? Flash older update?
Click to expand...
Click to collapse
Find a more updated version of twrp or just find cwm and flash the latest through ROM manager
Sent from my SGH-T989 using xda app-developers app
i tried
cwbeasley said:
You're on the wrong recovery. Change to CWM 6.0.3.7 NON TOUCH and it work.
Before you ask anything, only use that recovery listed above.
Click to expand...
Click to collapse
Okay so does it need to be 6.0.3.7 because i got cwm and put the latest update via rom manager. Also whats the best steps to installing a rom.
Hi,
Few months ago I rooted my Galaxy Wonder (Malaysia version) to CWM-based Recovery v6.0.3.4 and flashed to a Custom ROM. Now I wanted to flash back my phone back to Stock Rom because the Custom ROM is very battery consuming.
Now, when I try to flash the Stock ROM in CWM recovery.. the error shows "E: Can't open /sdcard/I8150DXLM3_I8150OLBD1_XME.zip (bad)" then Installation aborted. I tried to download a few Stock ROM from different sources but still give me the same error when I wanted to flash it in CWM Recovery.
Can anyone here please tell me how to solve this problem? Do I need to unroot my phone (flash back to Stock Recovery) before I can flash back to Stock ROM? If yes, how to flash back to Stock Recovery?
Your help is really appreciated. Thanks in advance. Hope to see you all to reply me
follow this http://forum.xda-developers.com/showthread.php?t=1467128
you're phone will be what you want
Keep on restarting and shows SAMSUNG logo only!
alfatoni said:
follow this http://forum.xda-developers.com/showthread.php?t=1467128
you're phone will be what you want
Click to expand...
Click to collapse
Now I follow the steps in the thread you given me by using Odin.. After the step <1> Close serial port and wait until rebooting..
My phone is keep on restarting and appear the SAMSUNG logo and never enter into android system! It seems like a another problem coming out? How to solve this problem now? :crying:
First start up takes up to 5 min.
But if you get bootloop, go to recovery and wipe data/factory reset
Sorry for my english
first, download your country stock rom
after download, extract this file
download odin and samsung usb driver
flashing frimware via ODIN, wait until succed, if stuck, go to recovery, wipe data and cache. finis
StephYee said:
Hi,
Few months ago I rooted my Galaxy Wonder (Malaysia version) to CWM-based Recovery v6.0.3.4 and flashed to a Custom ROM. Now I wanted to flash back my phone back to Stock Rom because the Custom ROM is very battery consuming.
Now, when I try to flash the Stock ROM in CWM recovery.. the error shows "E: Can't open /sdcard/I8150DXLM3_I8150OLBD1_XME.zip (bad)" then Installation aborted. I tried to download a few Stock ROM from different sources but still give me the same error when I wanted to flash it in CWM Recovery.
Can anyone here please tell me how to solve this problem? Do I need to unroot my phone (flash back to Stock Recovery) before I can flash back to Stock ROM? If yes, how to flash back to Stock Recovery?
Your help is really appreciated. Thanks in advance. Hope to see you all to reply me
Click to expand...
Click to collapse
You need to do a clean installation/ pristine. since it will leave some custom ROM files in ur internal storage. i always do (in CWM) wipe data / factory reset, format system and format /sdcard0 (internal storage) before installing any custom/ stock ROM.
dec0der said:
You need to do a clean installation/ pristine. since it will leave some custom ROM files in ur internal storage. i always do (in CWM) wipe data / factory reset, format system and format /sdcard0 (internal storage) before installing any custom/ stock ROM.
Click to expand...
Click to collapse
Yes! After I wipe data/factory reset and clean the cache, it works already! Thanksss guys! :laugh:
StephYee said:
Yes! After I wipe data/factory reset and clean the cache, it works already! Thanksss guys! :laugh:
Click to expand...
Click to collapse
keewl!
hi,everyone.
i've just tried to install cm11 in my galaxy nexus and it cannot boot on now
its installation is fail because status 7 in the cwm recovery
i still cant boot on my phone
can anyone help me
What version of CWM Recovery are you on? An update of the recovery to a newer build might help.
Break me off a piece of that Kit-Kat ROM!
What version of Android are you coming from? Anytime you are switching to a different ROM, especially from a JellyBean (4.3 or other) to a KitKat 4.4 ROM, you must do a clean wipe of your phone prior to installation. It sounds like you tried to do a dirty flash. Boot into recovery, and format data, cache, and dalvik cache, then try flashing the CM11 and Gapps.
If that doesn't work...try this thread. http://forum.xda-developers.com/showthread.php?t=2302599
tonykunyin said:
hi,everyone.
i've just tried to install cm11 in my galaxy nexus and it cannot boot on now
its installation is fail because status 7 in the cwm recovery
i still cant boot on my phone
can anyone help me
Click to expand...
Click to collapse
dwoods1983 said:
What version of Android are you coming from? Anytime you are switching to a different ROM, especially from a JellyBean (4.3 or other) to a KitKat 4.4 ROM, you must do a clean wipe of your phone prior to installation. It sounds like you tried to do a dirty flash. Boot into recovery, and format data, cache, and dalvik cache, then try flashing the CM11 and Gapps.
If that doesn't work...try this thread. http://forum.xda-developers.com/showthread.php?t=2302599
Click to expand...
Click to collapse
i am coming from the stock android 4.3 rom. I've tried wipe the data,wipe cache and dalvik cache.However,it just keeps saying installation error in the cwm touch recovery because of the status 7.
That method doesnt work for me. i still even cannot boot on my phone.how can i send it in again
OK, first you need to manually boot into your recovery by holding the volume up and down buttons at the same time and then pressing the power button. You should get into your bootloader and then be able choose recovery. I assume you have a backup...so just flash back to your stock android 4.3. Then once you are able to get back into your phone see if you can update your cwm. If updating you cwm turns out not to be the issue then go watch a YouTube video on how to fix the status 7 error. It basically involves copying the zip file you are trying to flash over to your computer and editing one of the files. Goodluck...let me know if this works.
tonykunyin said:
i am coming from the stock android 4.3 rom. I've tried wipe the data,wipe cache and dalvik cache.However,it just keeps saying installation error in the cwm touch recovery because of the status 7.
That method doesnt work for me. i still even cannot boot on my phone.how can i send it in again
Click to expand...
Click to collapse
check your baseband..you should be in the latest radio..mine is XXLH1..other rom required latest baseband..
Pretty sure it sounds like he is on an outdated version of cwm, status 7 errors can be signs of old recovery version. Fastboot flash the latest cwm.
Hello,
I have a unique issue. I'm having a problem installing any custom rom on my t999 (tmobile). I have been using a custom rom for over a year. Always used TWRP. Started with Paranoid Android and for the last few months I've been using PAC-Man (nightly) roms. I was having gps lock issues, I decided to upgrade the modem to a leaked UVUEMJC, this fixed the gps lock issue. But after the reboot, I was stuck on bootloader screen. The only way I could get the rom to work was to backup the rom, flash the system and data, and after that, the rom would work until reboot. I did this a few times until it stopped working. My efs was corrupted, IMEI missing, To recover it, I went into download mode, and noticed in red Warranty bit =1. I used odin to flashed a rooted cf 4.3 samsung touchwiz rom (root66_TMO_T999UVUEMJC). All imei/efs issues were fixed. I decided to try installing a custom rom again, PAC-Man rom, it installed just fine, all EFS/IMEI info was intact, but at reboot, I got stuck on the CM bootlogo. This happens everytime. IF I recover a backup, it gets stuck on the boot logo. I'm using TWRP v2.6.3.
Anybody have any suggestions on how to fix this issue?
Thanks!
Install TWRP 2.6.3.1. Then take a Nandroid.
Next wipe /Data. Then flash your Custom Rom. Wipe Dalvik + Cache after the Flash. Reboot and report.
Perseus71 said:
Install TWRP 2.6.3.1. Then take a Nandroid.
Next wipe /Data. Then flash your Custom Rom. Wipe Dalvik + Cache after the Flash. Reboot and report.
Click to expand...
Click to collapse
Thanks for the reply Perseus71. I'll give it a shot!
acedik said:
Thanks for the reply Perseus71. I'll give it a shot!
Click to expand...
Click to collapse
Upgrading to the newest TWRP did the trick! Everything is working fine now. :good:
Thanks for the help!
I'm also having trouble flashing PAC-man.
SGH-T999LUVUBMK4
Factory reset everything, wiped SD card.
Tried latest TWRP and CWM.
Suggestions?
D
Donny Orbit said:
I'm also having trouble flashing PAC-man.
SGH-T999LUVUBMK4
Factory reset everything, wiped SD card.
Tried latest TWRP and CWM.
Suggestions?
D
Click to expand...
Click to collapse
You need to post info about the error
Sent from my SGH-M919 using Tapatalk
It says
E: Error executing updater binary in zip '/external
Error flashing zip '/external_sd/pac_d2tmo-night
I tried flashing the Rom that doc fixed specifically for the T999LTE for the CM10.1.2 also with no avail.
Same problem.
D
wipe Dalvik and Cache before trying the rom again. If