Hi,
here is my "new" clean multi language CM 12.1 ROM which I tweaked from 3 different CM12.1 ROMs for the LETV 1 Pro_US.
My main focus was to fix GPS/WiFi/Cell Tower location, Mute Switch and video playback all together.
So I'm not a ROM developer, I only took the binaries from working CM12.1 ROMS and cooked it together.
There is still the Collapseromer chinese tweak menu inside the settings as I like some of those CPU and power saving options and the notification LED configuration features.
Tested V4.2b installation sequence
I went to TWRP 3.0.2 for a factory reset wipe
Installed ROM "cm-12.1-20160921-BetaHydri-CollapseTweakV42b.zip"
Installed OpenGApps arm64 5.1 Nano
Installed all three ZIPs from DolbyAtmos Fix
Wiped Caches via TWRP
Rebooted
V4.2(b) Version details:
New: v4.2b ROM with changes in build.prop file regarding: DEXOPT flags, Dalvik cache settings and WLAN scaning interval. (see links below for V4.2 or V4.2b - very stable no any sort of crashes for me the last 4days)
NEW: Fixed the Gyroscope (aka VR) since v4.2. - Do not dirty flash ROM V4.2b, it's better to Factory reset wipe the handset and follow the installation sequence, before doing other tweaks.
tiny update as hotspot didn't assign IPs for connected clients [26.09.2016] (only APIPA addresses)
To get OTG to work install ES File Manger - Thanks to @nsmsdz
I integrated the translated collapseromer settings - Thanks goes to crisbal aka crisGreece for his efforts to translate the useful collapseromer setting tools !
I like the BlueGod SideBar - see screenshots.
Enabled the OIS "Optical Image Stabilization" in the build.prop per default.
Build.prop is configured to use en,US as language on first start after factory reset.
Integrated the actual OpenCamera into the ROM. It supports the newer API2 and 120fps Video recording.
Removed some left over AudioFX and DolbyAtmos files in the ROM (for clean DolbyAtmos and ViperFX installation use the ZIP in TWRP)
GPS and Cell Tower / WiFi location works (like older Vx versions)
Video playback e.g. Periscope etc. works (like older Vx versions)
CM12.1 has a interated root option in the developer settings
V4.2b ROM https://mega.nz/#!b4dmDKYa!0MNmYrHPd8wgqXt1YXHnT5yUF4YbKEIkoVPcAWVeRK0
AudioFX/Dolby link: https://mega.nz/#F!Gk1S1ayZ!xKjkMk4uXAM_ckFRzX9QbA
OpenGApps link: http://opengapps.org/
ScreenShots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--> SuperSU v2.76 ZIP can be flashed via TWRP for better root support. It is then recommended to disable the built-in root CM12.1 option.
--> XPosed Framework is also working
Please also read thread from @teorouge http://forum.xda-developers.com/leeco-le1-pro/development/cm-12-1-various-builds-t3398334 for additional tips around CyanogenMod for our Le1Pro.
OLDER Versions:
V1 Version with tethering issues
https://mega.nz/#!D0EwGbQQ!6BwHS6Zi301uIdQRGQgnweNYLI3nzp1AqQosIcMV7HY
V2 Version from 12.07.2016 19:00 - Please try this one. If you already setup you phone with V1 you can try to dirty flash this V2 version.
https://mega.nz/#!HlMiXSLB!2bww_PZr_gXm0FAp8itXM_Q76-62DH3HjcknlhSEuuM
V3 Version link:
ROM V3 link: https://mega.nz/#!341lgTBb!d8dyBjOQNBsOZavSEZ-bqev3WH6_eATKec2V2qtGaK8
Feature in V3
C-Apps integration without AudioFX (for Dolby & AudioFX install the ZIP fixes !)
replaced untrusted chinese MBrowser
OTG should work in V3. I Tested it with my USB stick (if not for you. Your option is: https://play.google.com/store/apps/details?id=net.shajul.usbotg&hl=it)
GPS and Cell Tower / WiFi location works (like older Vx versions)
Video playback e.g. Periscope etc. works (like older Vx versions)
CM12.1 has a interated root option in the developer settings
V4 Version link:
BetaHydri V4 ROM https://mega.nz/#!DoFWRbSL!1Bkue1baeE6ThDSJnmZuSnbqyaZ80G0NvcQdO4LibsA
Feature in V4
Implemented some fixes that were left over from V3
Cleaned ROM
V4.1 version link:
BetaHydri V4 ROM https://mega.nz/#!ykEwVKBT!nLKIp18ZxRQBWhMCJvtXjJXU6LeVrt0fO-ex3Ip7mIk
Fixes in V4.1 from previous
I integrated the translated collapseromer settings - Thanks goes to crisbal aka crisGreece for his efforts to translate the useful collapseromer setting tools !
I like the BlueGod SideBar - see screenshots.
Enabled the OIS "Optical Image Stabilization" in the build.prop per default.
V4.2 version link:
BetaHydri V4.2 ROM https://mega.nz/#!a0VynZDY!nDlOKa4Pjh_6hXRS5DNHPONwCEErS9lzacHLdRQUnRc or
Fixes in V4.2 from previous
Fixed the Gyroscope (aka VR) problem with the inverted x-axis.[/
USB OTG can be fixed install following Play Store App: ES File Manger
The ROM should also work on CN models as the baseline are the collapaseromer ROMs. So may someone test it on CN models as well
But I have the US LeEco LetV 1 Pro US.
So far only IR Blaster won't work and anyone who wants to try to transplant IR from some other CM ROMs should do so !
Normaly IR sensors are being triggered via COM port communication. So the kernel modules should already be included in CM OS. I think only a kind of COM2Ir service that initialize the sensor and listens for the commands from IR Apps is missing.
ATTENTION for those that are located in china and using my ROM. You may have to delete the GOOGLE DNS SERVERS inside the build.prop. As far as I know Google services are completely blocked in china. Have also a look inside the gps.conf for TIME server url changes maybe needed in china.
Unbrick tools set for LeTV 1 Pro
https://mega.nz/#!eklxgR7B!fUFvwHmSNSYCPcnBpPJO_eqhlGSDTpcGjdAzzifMYtc
Enjoy BetaHydri !
Here's a newer C-Apps featuring updated AudioFX: maybe you want to implement that in your ATMOS fix? Cheers!
ps. dirty-flashed your ROM, wiped data/cache after flash only. Gonna check and report about location positioning, does that work for you now?
teorouge said:
Here's a newer C-Apps featuring updated AudioFX: maybe you want to implement that in your ATMOS fix? Cheers!
ps. dirty-flashed your ROM, wiped data/cache after flash only. Gonna check and report about location positioning, does that work for you now?
Click to expand...
Click to collapse
Yes, al fin. Everything works. GPS and WiFi positioning is really fast now, and the videos. I combined the two Collapseromer ROMs. So I had to find out which driver an binaries where responsible for the problem and then I tried it. I also removed the chinese apps but not those ones in the setting menu as I like those tweaks.
I also tried to delete the chinese beidu keyboard, but than I couldn't get at first boot the internet connection working. So best is to delete the keyboard after you have configured your phone.
I also included the google keyboard inside the ROM, but I think it will only work if you flash after the ROM directly the OpenGApps.
So only IR Blaster not working. And the Atmos fix must be installed manually. But important is that we have a CM12.1 ROM. I hope it will stay stable. Since this morning its working....
This is quite a fine work you did, Beta! I get FreeFlight 3 app working and tonight I'll try smart lock via location when I'll get home. Would you like me to point out in the general CM12.1/1 thread?
teorouge said:
This is quite a fine work you did, Beta! I get FreeFlight 3 app working and tonight I'll try smart lock via location when I'll get home. Would you like me to point out in the general CM12.1/1 thread?
Click to expand...
Click to collapse
Go head, you can also mention it in all the other forums. So that those who want to change to CM12.1. I only made a new thread as I wanted that is visible for everyone a bit faster. But nonetheless I still hope for a MM ROM for US ;-(
I am using it all day. Excellent work BetaHydri!
Just an heads up for other possible Parrot Bebop drone pilots: Free Flight 3 now works and won't crash but it can't see the drone, even though it's wifi connected... too bad.
Anyway thanks Beta, this release looks solid as a rock.
teorouge said:
Just an heads up for other possible Parrot Bebop drone pilots: Free Flight 3 now works and won't crash but it can't see the drone, even though it's wifi connected... too bad.
Anyway thanks Beta, this release looks solid as a rock.
Click to expand...
Click to collapse
hmmm maybe a special video codec for the video broadcast from the drone is missing ? In which Collapseromer ROM did the video broadcast worked ?
Maybe I can have a look this evening if I missied something when I did the transplant...
the rom have bug ?
Thanks, I actually think it's more a wifi issue as I can connect to it using regular wifi manager (and it says "connected") but the app won't see it. Too bad I can't remember which build had this working fine, maybe I can point out another Cyanogen for HTC One and you check that? I use another phone as an "experimenting" device and usually fly my drone with that. Cheers!
teorouge said:
Thanks, I actually think it's more a wifi issue as I can connect to it using regular wifi manager (and it says "connected") but the app won't see it. Too bad I can't remember which build had this working fine, maybe I can point out another Cyanogen for HTC One and you check that? I use another phone as an "experimenting" device and usually fly my drone with that. Cheers!
Click to expand...
Click to collapse
Ok, but normal WiFi internet connections via Access Point works. So it's I kind of adhoc WiFi connection to the drone isn't it?
Gesendet von meinem Le 1 Pro mit Tapatalk
Indeed, it's something like that: I connect the phone to the controller via wifi and the controller connects to the drone via wifi too. I see al the connections are OK (drone-controller and phone-controller) but I can't see the drone on the phone.
teorouge said:
Thanks, I actually think it's more a wifi issue as I can connect to it using regular wifi manager (and it says "connected") but the app won't see it. Too bad I can't remember which build had this working fine, maybe I can point out another Cyanogen for HTC One and you check that? I use another phone as an "experimenting" device and usually fly my drone with that. Cheers!
Click to expand...
Click to collapse
Ok, but normal WiFi internet connections via Access Point works. So it's I kind of adhoc WiFi connection to the drone isn't it?
teorouge said:
Indeed, it's something like that: I connect the phone to the controller via wifi and the controller connects to the drone via wifi too. I see al the connections are OK (drone-controller and phone-controller) but I can't see the drone on the phone.
Click to expand...
Click to collapse
I will test the Miracast adhoc WiFi connections to my Samsung TV this evening.
Gesendet von meinem Le 1 Pro mit Tapatalk
BetaHydri said:
Ok, but normal WiFi internet connections via Access Point works. So it's I kind of adhoc WiFi connection to the drone isn't it?
I will test the Miracast adhoc WiFi connections to my Samsung TV this evening.
Gesendet von meinem Le 1 Pro mit Tapatalk
Click to expand...
Click to collapse
Ok found the first bug. The same we had in collapseromer 20160512 the WiFi Hotspot and Bluetooth tethering doesn't work. Will try to fix this. This could also be the root cause of your drone app problem.
Gesendet von meinem Le 1 Pro mit Tapatalk
Thanks Beta, much appreciated. Now I've found this module and I'm thinking think about going stock... http://forum.xda-developers.com/xposed/modules/mod-leeco-eui-moder-t3416932
teorouge said:
Thanks Beta, much appreciated. Now I've found this module and I'm thinking think about going stock... http://forum.xda-developers.com/xposed/modules/mod-leeco-eui-moder-t3416932
Click to expand...
Click to collapse
I did fix the issue. So I will upload the ROM soon. Need todo some test. But Tethering is working and Location is working in the new CM12.1 ROM....
BetaHydri said:
Ok, but normal WiFi internet connections via Access Point works. So it's I kind of adhoc WiFi connection to the drone isn't it?
Gesendet von meinem Le 1 Pro mit Tapatalk
Click to expand...
Click to collapse
I put the link to V2 on the first page. Please try it !
IR Blast
Awessome work BetaHydri!! Many thanks for your work, please you can try to fix the IR blaster?
BetaHydri said:
I did fix the issue. So I will upload the ROM soon. Need todo some test. But Tethering is working and Location is working in the new CM12.1 ROM....
Click to expand...
Click to collapse
This seems attractive. Which stock version would you recommend: v50-CUOCO92-5.5.012S, or v60-CUOCO92-5.5.014S
What of battery life compared to stock ROM and standby ? Satisfied ? I'll give it a try
Related
JB AOSP 4.3 alpha 1 by LeTama
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*** DISCLAIMER ***
I'm not responsible if it breaks your device! Don't install it if you want something stable.
*** /DISCLAIMER ***
Be careful, this is a very preliminary build. Backup your stuff and expect problems.
DON'T TRY TO FORMAT any unformated external USB drive/key with OTG cable, it could format internal storage instead !!!
Introduction
Here is my port of JB AOSP 4.3 for our Xperia S. This is a work in progress, it's currently missing few of the patches I used in 4.2.X and few things are completely untested.
Installation and downloads
You need unlocked bootloader and a working recovery.
Download installation zip from here, mirror thanks to @androidlover007 (I know, uploaded.net is not the fastest of the earth, multipload mirrors coming soon. I'm not against posting any other mirror).
Copy it to internal storage
Wipe Data/Cache
Install gapps for 4.3. Currently, we don't have "official" gapps from CM team, I used PA ones with good success.
Reboot and let the rom settle down a bit
Important: Current release has a recovery with broken offline charging, you should flash a fixed one after installing the rom to avoid any trouble. Check this post.
Kernel source code is here (branch jb-4.2-experimental).
Note: this rom flashes its own kernel that comes with TWRP recovery and last version of Boot Manager. Just use volume up/down to navigate boot manager menu and power to select if you want to go to TWRP. Don't play with Boot Manager options if you don't know what you're doing.
Status
Working:
Display / 3D (with some stuttering, under investigation)
Audio (without LPA, won't add it)
Calls / SMS / MMS / Data
Camera (Pictures / Videos)
Bluetooth
Wifi
Wifi Tethering
Sensors
GPS
Hardware video encoding/decoding
Offline charging
NFC
SELinux
WIFI EAP. (untested, can anyone confirm ?)
Not working:
FM radio: I won't implement it in aosp with current proprietaries as they will conflict with 4.2+ bluetooth.
HDMI.
Auto brightness (disabled now)
And probably more, let me know
Missing
TRIM Support
Known issues
1080p video stuttering (waiting for new Sony firmware)
voip audio disabled, voip is going through normal channels (waiting for new Sony firmware)
Wifi direct disabled (waiting for new Sony firmware)
subway surfers game is not working
SuperSU not working. You can flash a working one here.
Changelog
2013/08/07 - Alpha 1
- SELinux added
- Media server crash on audio notification fixed
- Move to SD fixed
- Ril crash on some mvno fixed.
- SuperSU updated to 1.51
- 12 and 9M camera size
- Panorama fix
- Google backup selected as default
- EAP finished
2013/08/03 - Alpha 0
FAQ
Can I flash any kernel with it ?
No. This rom is using Nexus 4 proprietaries and requires matching video drivers. You must use embedded kernel.
Something is not working, crashed, whatever, how can I help ?
Please provide logs! Description is not enough, I need at least logcat and ideally dmesg. If phone reboots, go to recovery, get the /proc/last_kmsg file and provide it to me.
Dev options are missing ?
No, they're just hidden, it's now the default behavior in 4.2.x. To enable it, go to settings / about and tap multiple times on build number, menu will be enabled and stick after reboot.
* reserved, now you can go on *
Great And Fast Work.
Omg you are fast man
Sent from my LT26i using xda premium
Is there need to report bugs or it is too early for such thing?
Anyhow, I'm downloading right now, will report back with observations.
Log:
- Booting seems fine, some glitches but nothing to worry about...
- Font is kinda different, I like it, very much. It is even more close to Helvetica and for me it is very nice typeface porn
- Touch vibration is kinda shorter, more direct but weaker.
- Developer tools are updated with very nice features, everything mentioned at Google I/O 2013.
- Animations are smoother. It's not that "new ROM" smoothness, transitions between screens appear like constant 60fps, without that lag that sometimes occurs regardless on hardware.
- There are some differences in first time configuration, nothing radical but still...
- Google Play Store wont open, close it and relaunch and then it will show TOS. It lags a bit.
- Is it me or DPI is kinda different? Everything seems to be bigger. Icons in drawer, Google play apps... SystemUI feels kinda same. EDIT: 320dpi.
- AOSP keyboard icon is different. RAM usage is same, no lower usage or anything special. Available RAM - 622 MB.
- Touch responsivness seems a bit better.
- Texdroider DPI (DPI changer) doesn't work. On 4.2.2 it would work with OpenSEMC, but it's not the case on 4.3.
SuperSU does not work (no su binaries), this ROM is unrooted. To root it again do the following:
Download SuperSU 1.51 from here
Move it to your root folder on your phone
Turn your phone off, boot it into recovery
flash that zip you copied to your root folder "SuperSU 1.51"
Reboot to system.
Voila!
damn your way ahead of me
letama
Click to expand...
Click to collapse
Damn your way ahead of me,aw whell , ill try in 4.4 xD
PS did you use the google 4.3 source code or did you use Sonys Aosp source code... or did you port this from XZ??
still learning....
i love that warning about formatting otg drives d:
great
mirhl said:
i love that warning about formatting otg drives d:
Click to expand...
Click to collapse
i am so happy,now a android 4.3 developing for our xperia s.hope it is soon capable of daily use.THANK YOU to all developers :laugh: i love yall very much
switzerland92 said:
Is there need to report bugs or it is too early for such thing?
Click to expand...
Click to collapse
Yes, please do. I didn't run it for a long time, I really need feedback.
Envious_Data said:
Damn your way ahead of me,aw whell , ill try in 4.4 xD
PS did you use the google 4.3 source code or did you use Sonys Aosp source code... or did you port this from XZ??
still learning....
Click to expand...
Click to collapse
This is google 4.3 code, with my 4.2.x device tree and proprietaries. I'll take a shot at merging 4.3 kernel drivers soon.
mirhl said:
i love that warning about formatting otg drives d:
Click to expand...
Click to collapse
Burnt once! I didn't include 4.2 patch. Code changed, so it could work properly, but I have to test it first with a good backup
Ty bro
letama
Click to expand...
Click to collapse
hopefuly soon i will know as much as you
lets see if sony make a 4.3 or a 4.4 (sony themed)
i will definatly try to port that to an older device
Hey awesome letama! Are you going to release the ROM for loop? Tried your script but it didn't work. Thanks
letama said:
Yes, please do. I didn't run it for a long time, I really need feedback.
Click to expand...
Click to collapse
To keep it on one place and as organized as possible I'll edit my post with new info for you and others that are afraid to flash it right away
EDIT: Well, I don't have root. SuperSU says I must manually re-root and I must, quote, "consult the relevant forums for your device" which in this case is your thread
Someone please mirror i can never use uploaded.net
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk
Noob question: Can adreno 220 ever support OpenGL ES 3.0 ?
skifyr123 said:
Hey awesome letama! Are you going to release the ROM for loop? Tried your script but it didn't work. Thanks
Click to expand...
Click to collapse
Yes, script can't work. I will upload it tomorrow, it's prepared but untested.
switzerland92 said:
EDIT: Well, I don't have root. SuperSU says I must manually re-root and I must, quote, "consult the relevant forums for your device" which in this case is your thread
Click to expand...
Click to collapse
Check first posts, known issues sections, SuperSu is not up to date in the rom. There is a link to one that can be flashed and works...
I'm going to download as soon as I get home. About performance, similar to 4.2.2?
Enviado desde mi Xperia S usando Tapatalk 4 Beta
Ben36 said:
Someone please mirror i can never use uploaded.net
Click to expand...
Click to collapse
Electricity problem here, I lost my multiupload I'll restart tomorrow.
CyanogenMod 12 for the Xperia Z3
[STATUS]
Some vital functionality is still missing, mobile data being one of them and the camera being another. This build is therefore primarily targeted at developers and experimenting users.
NOTE: After booting up, try toggling wifi to avoid sleep issues.
[Working]
Touch Screen
Cellular radio
Bluetooth
Wifi
NFC (Temporarily broken)
Speaker audio
Adaptive Brightness
Gyroscope (Auto rotation)
Charging
Screen sleep (In lack of better term)
++++
[Not Working]
Mobile Data
Camera
Probably a lot of bugs and annoyances
++++
[Changelog]
>20141228
-- Updated CM12 sources with the new telephony stuff
>20141226 v2
-- Now using open source libril
>20141226
-- Android 5.0.2
-- 23.0.1.A.5.77 vendor libs update
-- New Audio HAL
-- Bluetooth improvements
-- Added missing proprietary service (modem related)
-- Thermanager updates (Results in very dim recovery though, sorry about that. Will fix asap)
-- NFC broken (Will get that up again, just didnt make it a priority for this build)
-- gsiff daemon still crashing. Remove it to improve battery life significantly.
>20141217
-- Added NCI HAL Module (credits: chirayudesai). NFC now works! (yay!)
>20141211
-- Kernel updates. Added several new modules.
> 20141210
-- Fixed the keymaster issues. systemui no longer crashes and security settings are now available. Bluetooth improvements.
> 20141209
-- Updated device config, kernel and CM12 sources (check Github for details)
> 20141201
-- Initial Release
[Installation Instructions]
Note: Do not flash unless you know what you're doing.
STEP 1 - Push the .zip file to your /sdcard partition. Boot into recovery and flash it. Make sure to do a full backup first. If you want to go back to a non CM12 ROM please flash a CWM recovery featured boot.img as the CM12 recovery is not exactly functional.
STEP 2 (Optional) - Flash Google Apps (Download Link)
[DOWNLOADS]
cm-1220141228-UNOFFICIAL-leo.zip
cm-1220141226-UNOFFICIAL-leo-v2.zip
cm-12-20141226-UNOFFICIAL-leo.zip
cm-12-20141217-UNOFFICIAL-leo.zip
cm-12-20141211-UNOFFICIAL-leo.zip
cm-12-20141210-UNOFFICIAL-leo.zip
cm-12-20141209-UNOFFICIAL-leo.zip
cm-12-20141201-UNOFFICIAL-leo.zip
NOTE: Be sure to wipe data if you're coming from a non-CM12 ROM.
[SCREENSHOTS]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[THANKS]
A big thanks to nycbjr for sparring with me and to everyone here who's spending their time testing, giving feedback and shoehorning in fixes and hacks.
XDA:DevDB Information
CyanogenMod 12 for the Xperia Z3, ROM for the Sony Xperia Z3
Contributors
Untouchab1e
Source Code: https://github.com/Zyg0te/android_device_sony_leo
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2014-12-01
Last Updated 2014-12-28
Just a suggestion, maybe you can have a look at krabappel's build, he has got system.ui working
gallardo5 said:
Just a suggestion, maybe you can have a look at krabappel's build, he has got system.ui working
Click to expand...
Click to collapse
Yep but that's AOSP and not CM12. I also have AOSP with a functioning systemui as well as a working modem.
@ Untouchab1e
Thank you very much for your work! I really appreciate that. I can't wait to have a fully working version!
owh my goodness, I've been waiting for a long time. thank you Mr untouchable.. I'm speechless. I can't wait to see cm12 running on my z3..
btw.. first leo cm12 is now available from fxp blog
iBuzman said:
btw.. first leo cm12 is now available from fxp blog
Click to expand...
Click to collapse
Where ? Link...
iBuzman said:
btw.. first leo cm12 is now available from fxp blog
Click to expand...
Click to collapse
I have tried this, WiFi is working but systemui crashes every time you lock your phone.
---------- Post added at 01:17 AM ---------- Previous post was at 01:17 AM ----------
SweDunda said:
Where ? Link...
Click to expand...
Click to collapse
Available here http://forum.xda-developers.com/showthread.php?t=2959665
I have fixed system ui issues by adb pushing SystemUI.apk from my latest 5.0.1 r2 lollipop aosp build - so I presume any aosp lollipop systemui apk will fix it. (all crashes gone - screen off charging now as I type)
Maybe this is a quick and dirty fix for your builds @Untouchab1e?
After pushing modem files, mba files and ril libs to fxp build my cellular connected up - meaning wifi, radio and SystemUI incl Screen Off/On all working :good: more details posted over in fxp cm12 thread
iBuzman said:
I have fixed system ui issues by adb pushing SystemUI.apk from my latest 5.0.1 r2 lollipop aosp build - so I presume any aosp lollipop systemui apk will fix it. (all crashes gone - screen off charging now as I type)
Maybe this is a quick and dirty fix for your builds @Untouchab1e?
After pushing modem files, mba files and ril libs to fxp build my cellular connected up - meaning wifi, radio and SystemUI incl Screen Off/On all working :good: more details posted over in fxp cm12 thread
Click to expand...
Click to collapse
Cool, wifi works too? Thought the bcmdhd wifi hal was broken for all bcm devices. Nice.
Untouchab1e said:
Cool, wifi works too? Thought the bcmdhd wifi hal was broken for all bcm devices. Nice.
Click to expand...
Click to collapse
yep ?
Yup, wifi seemed rock solid - 3G/LTE was totally on the fritz tho .. But, getting closer gents!
Xperia Z3
hey guys follow ibuzman's solution most of the functions work except one flawed the security under settings is inaccessible
yeah I have that too..
I used adb install to get around not having unknown sources checked.
nolihowell said:
hey guys follow ibuzman's solution most of the functions work except one flawed the security under settings is inaccessible
Click to expand...
Click to collapse
That is due to the AOSP systemui.apk I believe. The reason for the systemui issue in the first place is that the keyguard doesnt connect with the service and hence security settings wont work because the keys cant be handled.
I'll definitely root my z3 if this Rom works and can be used for day to day use..
Hi. I cant download the rom as link seems dead. And thats why im asking, does the sound work with this rom? I flashed cm12 from fxp thread and it doesnt, so I was jist curious, and I will flash it straight away if sound works
gallardo5 said:
Hi. I cant download the rom as link seems dead. And thats why im asking, does the sound work with this rom? I flashed cm12 from fxp thread and it doesnt, so I was jist curious, and I will flash it straight away if sound works
Click to expand...
Click to collapse
Link updated.
Untouchab1e said:
Link updated.
Click to expand...
Click to collapse
Flashrd, for now most of things working, except camera and mobile data bluetooth is not very stable as it has problems with connecting, but once connected (after few tries) its fine
Just to make everything clean, maybe some of issues are my fault because I fkashed something that I should not i fully wiped and flashed your rom, then cm12 gapps from here ( https://s.basketbuild.com/gapps ) and them modem.zip from this thread.
Edit: after some time with it (I will probably leave it as daily driver until it gets on my nerves enough ) I found few other issues:
Some apps have compability issues (e.g. xda loads, xperia z3 forum is still fine but when I go to subforum like advanced development, play store services crashes, and so does xda app. Everything loads in the background, I can see zverything behind the xxx has crashed message, but as soon as I press ok, it quits. Another one is facebook messenger, it is fine when browsing through conversation, but when I try to open one conversation, be it in app or from those small heads, it crashes).
Another issue is youtube (advertisements of course work, but the video I wanted to watch does not, it says "cant connect, press to try again")
Another issue is that every time I try to uninstall or clear data from any app, the phone does a soft reboot (shows bootanimatoon immediately)
The last issue I found is that bluetooth connects to my bluetooth headset, but sound stops working, just like in fxp CM, it just stays at 0:00 no matter what track I try to play.
Others issues are known, like camera or mobile data signal drops entirely for few seconds from time to time but I think it is also known.
I will keep testing it as for now it is workibg enough to be my daily driver so will keep it updated with anything that I find
Found another thing, but I wont really call it an issue and it made me laugh a bit. No matter how full your battery is, phone just keeps saying its low. Battery life is fine, but notification comes after few seconds of cleaning it, and it comes every time. Right now the notification says " battery is low! Battery level : 82%" but lets just call it a laughable feature
@gallardo5 thanks for your detailed feedback. Ive build and uploaded a new build. It would be great if you could check it out and see if there are any changes or improvements. I havent done any huge modifications. But I have been tweaking around with vendor libs and the device configuration and of course, updated CM12 sources which at this point can have a significant impact on functionality.
Thank you. I really appreciate everyone's effort to make this work! I am sure we will get CM12 running well together
Rom: Cm 13
Kernel Source: Stock Honor 3c
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#This is the latest cm 13 ported for our device from mtkroms.com
What's Working:
#Camera
#Video recording in stock/google camera is working with 1080p.
#Ril, Dual SIM, USSD, SMS, Audio in calls, no more fc in dialer.
#Wi-FI, Bluetooth, Mobile Data, Hotspot.
#Audio, Mic
#All sensors ( proximity, accelerometer, rotation)
#Notification LED.
#Storages (SD and internal) [Mounting in both Phone and PC]
# Gapps, Youtube 720P
Known Bugs:
#GPS partially works...[The GPS detects your location when you're at one place (not moving) very accurately but when you move it doesn't work properly]
#VPN isn't working.. [May work with some third party apps]
#Changing mobile data mode from 3g to 2g doesn't work. (Still not fixed in every cm13 for mediatek devices)
Known Solutions:
#You should not face any mobile data issue but if you do, it'll be not for replacing your modem files properly. Turning on and off airplane mode solves this issue ( Just do this once after every restart of your device ).
#Turn off audiofx for better sound cause this rom already has better sound integrated into itself.
I'll try to fix the remaining minor or unnoticable bugs...if you wanna taste of cm13, It's probably the best build for our device right now
My contributions to this rom:
#Porting this rom (First Build)
#Fixing Bluetooth bug (Second Build)
#Fixing Sensors bug (Third Build)
#Modifying Hesham's youtube patch for cm12.1 to work with any cm13 based roms
#*Fixed notification Led bug ( After receiving any notification, notification led didn't pulse or breathe, it just kept always on until clearing the notification )
*New Boxer Email and Gallery Next app from latest capps.
* Added new BootAnimation...cause cm's boot animation is too boring
*Fixed Audio issues The sound quality of this rom is now greater than any other cm12.1 or cm13 ( Increased Loudspeaker sound, Fixed earphone noise distortion in full volume, Integreted Dolby and SRS audio into the rom for better bass in sound. I didn't include any third party dolby or srs app just imported their files in the rom, so you won't notice but you'll feel it for sure )(Fourth Build_Super Audio)
#I'm proudly presenting this rom's new version with huge modifications and improvements :
* Kernel tweaked.
*CPU optimizaed.
*GPU optimized.
*Battery Heavily Tweaked for faser charging. (I'm not sure it'll work or not)
*Ram lags minimized.
*Mediaserver Scanner Tweaked.
*Wifi Scanning Time Lessened.
*Stanby sleeper enabled.
*Mobile Data speed increased.
*Sd card r/w speed increased.
[All of this customizations are integreted into the rom itself] (Fifth Build_ICE AGE)
*An error ( invalid number ) popping up after a phone call, fix by Ajit added to this rom.
*After few mins rotation stopped working. I edited framework-res.apk and solved the problem. Now rotation works forever...
***THIS ROM'S BATTERY LIFE IS NOW BETTER THAN ANY OTHER CM13 ROMS FOR H30-U10. NO OVERHEATING. ON-SCREEN TIME IS GREAT AND YOU'LL BE AMAZED TO SEE THE STANDBY TIME OF YOUR DEVICE. PLZ LIKE MY POST AND LEAVE A FEEDBACK AFTER USING THE ICE AGE VERSION .
### I HAD TO WORK SO HARD FOR DEVELOPING THIS ROM. PLZ DON'T SHARE WITHOUT PROPER CREDITS AND DON'T REUPLOAD THIS ROM WITHOUT MY PERMISSION. THANK YOU.
Boot Animation:
***I'll continueosuly update rom links after fixing any bug.
Credits:
Ferhung, Fire855, Hyperion70, Diparth Shah, Ajit Guraya, Minh Quoc and Karim Gahgah, Aniruddha Adhikary, Team Roger That, nofearnohappy, Varun Chitre, Ariafan, Vald.masti, Alex
Thank you guys for compiling this rom...
Guys I'm not a pro on developing roms...I just ported this rom, fixed some bugs and developed this rom.
I'll try my best to fix the remaining bugs...
ROM LINKSLatest cm13 Rom : https://drive.google.com/file/d/0B3jAP5B2Fcq1SG5Xb05yd3lUUG8/view?usp=sharing
Gapps: https://drive.google.com/file/d/0B3jAP5B2Fcq1cmZVbDNrNG9pdnM/view?usp=sharing
Youtube patch for cm13: https://drive.google.com/file/d/0B3jAP5B2Fcq1MVlHTXROeDNvZ2M/view?usp=sharing
Link to my other ported ROM:http://forum.xda-developers.com/android/development/rom-ota-resurrection-remixv5-6-8stable-t3374493/post66747505#post66747505
PLZ DON'T MIRROR THIS POST OR THE ROM WITHOUT GIVING PROPER CREDITS
Installation Instructions*Take a nandroid backup if you want to restore your previous rom, incase anything goes wrong.
1. Wipe cache, Dalvik cache, System, Data
2. Flash rom
3. Flash gapps right after flashing rom (important)
4. turn device off..
5. Extract boot.img from this rom.zip and flash it using SPFT. (important)
6. Start your device.
7. If the touch is unresponsive and no sim is detected then goto recovery and flash codelover's kernel swapper and modemfix.
[ I think modem fix doesn't work in cm13...if it works, you are lucky but if it doesn't work then copy "catcher_filter_1_wg_n.bin" and "modem_1_wg_n.img" file from your stock rom's system/etc/firmware folder and paste and replace these two files in cm13's system/etc/firmware folder] (if you change these files in the cm13 rom zip file then you don't need to change permissions. but if you are doing it with root explorer then don't forget to change their permission to rw-r-r)
9. Reboot the phone and wait for the cm13 to bootup. The rom should boot within 10 mins.
Enjoy
Screenshots Attached Below:
does it needs to flash boot.img thru sp flash tool
if required how to flash boot.img steps pls
Sent from my H30-U10 using Tapatalk
popz1 said:
does it needs to flash boot.img thru sp flash tool
if required how to flash boot.img steps pls
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
bro...i don't have much time right now..but i'll make a tutorial after few hours.
Nice work, seems to look nice I'll flash it in a few days. But one thing, is there any difference in camera b/w cm 12.1 kernel.killers ROM and this one?
And does Snapchat video recording work? If you've not checked that can you please check that and let us know. Thanks and thumbs up for your port! ?
Sent from my Honor 3C using XDA-Developers mobile app
Thank you
good work boy ...
keep update
hammadhammad said:
Nice work, seems to look nice I'll flash it in a few days. But one thing, is there any difference in camera b/w cm 12.1 kernel.killers ROM and this one?
And does Snapchat video recording work? If you've not checked that can you please check that and let us know. Thanks and thumbs up for your port!
Sent from my Honor 3C using XDA-Developers mobile app
Click to expand...
Click to collapse
i think cm13's camera quality is better than cm12.1.
ok...i'll let you know after trying that.
Pavel Sajjad Khan said:
ok...i'll let you know after trying that.
Click to expand...
Click to collapse
Any update on Snapchat Video Recording issue?
i just fixed bluetooth and all sensors after trying some hours...ajit bro didn't response so i fixed them myself..
updating the rom links now.
i'm so happy
The adb is working? Because i have this rom installed and i try to use the apk mass install tool, and the phone was showing that depuration is active, but the program is not recognizing the phone, with 12.1 i use this tool without problems
Enviado desde mi H30-U10 mediante Tapatalk
Pavel Sajjad Khan said:
i just fixed bluetooth and all sensors after trying some hours...ajit bro didn't response so i fixed them myself..
updating the rom links now.
i'm so happy
Click to expand...
Click to collapse
We are happy too. Thanks for nice work. More importantly thanks for keeping devices alive and hopes alive too.
first bug i see proximity sensor not work
Hi,
I get FC "com.android.phone has stopped"
RIL is unstable. Network goes off after each call.
Hope you find a fix soon.
Hi, Is there any issues about Overheating and the battery life?
.
Thanks you! Keep up the good work..
Can anyone who has already tested this ROM tell if you can record videos in Snapchat ?
Sent from my Honor 3C using XDA-Developers mobile app
lHumanizado said:
The adb is working? Because i have this rom installed and i try to use the apk mass install tool, and the phone was showing that depuration is active, but the program is not recognizing the phone, with 12.1 i use this tool without problems
Enviado desde mi H30-U10 mediante Tapatalk
Click to expand...
Click to collapse
i'm not sure but i think you need to provide root access to apps and adb from developer options..
draculla444 said:
first bug i see proximity sensor not work
Click to expand...
Click to collapse
i've fixed all sensors and updated the rom link...plz redownload and try again..it'll work now.
jhongss09 said:
Hi, Is there any issues about Overheating and the battery life?
.
Thanks you! Keep up the good work..
Click to expand...
Click to collapse
i haven't noticed yet cse i was busy fixing bugs...but if there is any heating issue, i'll try to port thermal configurtion from reynard1 beta2 rom..i don't know if i can do it or not.
Pavel Sajjad Khan said:
i haven't noticed yet cse i was busy fixing bugs...but if there is any heating issue, i'll try to port thermal configurtion from reynard1 beta2 rom..i don't know if i can do it or not.
Click to expand...
Click to collapse
Im using it and i haven't noticed any overheating, and battery life is not the best but is pretty normal, same as others cm Roms. This is a pretty good ROM, thanks very much Pavel, another think that i noticed is that when battery is over (15%) the phone starts to getting a little slow, but that makes the battery last a little longer, in others cm with 5% practically the phone is discharge, in this with 5% and battery saver enabled you can use the phone (normaly) for about 10 - 12 minutes. I will try with the adb again
Enviado desde mi H30-U10 mediante Tapatalk
---------- Post added at 12:24 PM ---------- Previous post was at 12:21 PM ----------
And xposed is working fine, btw
Enviado desde mi H30-U10 mediante Tapatalk
hi guys, which recovery should i use to flash this rom? with cwm i get status 7 error and with twrp after flashing and reboot it hangs on the cyanogen logo and doesn't go any further!
Thanks in advance...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is modded JUI ROM by @Cuoco92 running on android 7.1.1. I do not own and make this ROM but I have asked for @Cuoco92 permission to make a thread here so that we can all refer and share this ROM in one, easy and organized place.
I'm using C103 device but so far this ROM is working fine for me with working wifi, hotspot, bluetooth, compass and fingerprint.
Installation :1. Boot into TWRP
2. Make a backup (optional. I don't need backups because I'm flashing this right from the beginning, migrating from EUI)
3. Wipe>Format Data (this is to remove device encryption so that you can see your internal memory in TWRP)
4. Wipe>Advanced>Cache, Dalvik/ART, System, Data (wipe)
5. Copy ROM into internal memory.
6. Go back to TWRP main page and select Install.
7. Flash the ROM.
8. Device will be automatically restarted after flashing finished. Don't worry if it does.
Downloads :
- ROM (VR12 from GDrive)
- VR10 (stable, from AFH)
BETA Builds Updates :- VR13.2
Features :
- Android 7.1.1 Nougat
- New recents compared to the iOS like EUI
- Tethering data limit
- Auto connect in File Transfer Mode
- Dolby and Viper4Android pre-installed
- Latest 3.2.1 TWRP automatically flashed after ROM flash finished.
- CameraHAL3 enabled ( in Cuoco app ; pre-installed with ROM)
- Adaway pre-installed (also in Cuoco app)
- Gapps preinstalled
- Better battery life, better heating management
- Rooted with Magisk v16.3
What's working :
1. Wifi and tethering
2. Fingerprint unlock
3. Root
4. Compass
5. SLR (bokeh), Mono Mode in camera.
6. Band 3 and Band 5 LTE, WCDMA, GSM.
7. Pretty much everything so far...
What's Not Working (in BETA):
- Some users reported speaker bugs coming from C103 devices. You can try this fix here
- For some reason Vanced youtube is not working in both TWRP install and Magisk Install
- Video recording does not work due to mic problem.
- You can try the mic fix using Magisk module here and see if it fix it. Voice call is working after using this module.
- PreInstalled Viper4Android do not work and buggy. @Cuoco92 has removed it in VR13 release.
Special thanks to @Cuoco92 for this wonderful ROM and for allowing me to create a thread for his ROM here. Check out all of his wonderful work in AFH here :
Screenshots :
Some camera samples :
Bokeh :
Mono :
Auto :
Some extra notes to C103 users :
This ROM was built by @Cuoco92 for C106 devices. So expect some bugs for your device as I have already written on the 1st post. However, you can this fix as shared by my local Coolpad Cool 1 community users and see if it works for you. It works for them but I have not yet tried this fix as I currently doesn't have much free time due to work.
If you're eager to fix it, you can try to :
1) Roll back stock EUI for C103.
2) Install stock EUI for C106 using Coolpad Manager.
3) Install official JUI for C106 using Coolpad Manager.
4) Install TWRP on your Official JUI.
5) Flash this Cuoco ROM.
*Some users reported their C103 works well without bugs when doing this steps since this ROM was built for C106 originally. I have not tested this yet because I have no problem with unable to record video since I don't use them. But you can try and let us all know if it works.
Thank you for shearing this Rom and a big thanks to the Dev @Cuoco92.
Magisk modules are working?
It can be works for c103 indian version??
reddsmokee said:
Magisk modules are working?
Click to expand...
Click to collapse
Which module?
[email protected] said:
It can be works for c103 indian version??
Click to expand...
Click to collapse
Works for me. Just wipe everything before flash. Follow the guides. It should work fine. I'm using C103 too.
But c103 indian version is different than Malaysian ....
After installing JUI Indian version c103 have bugs like no sound , second sim not working.
Congratulations on the initiative and thank you!
[email protected] said:
But c103 indian version is different than Malaysian ....
After installing JUI Indian version c103 have bugs like no sound , second sim not working.
Click to expand...
Click to collapse
Bro...read the first post. I AM using C103. When you do a full wipe, your device will be recognized as C106 after flashing this rom. I'm using it and so far everything is working fine. 4G LTE, second sim, speakers...
kodbz said:
Congratulations on the initiative and thank you!
Click to expand...
Click to collapse
It's about time actually. We need more thread in order to gain full functional device section.
vulturext said:
It's about time actually. We need more thread in order to gain full functional device section.
Click to expand...
Click to collapse
Maybe you should include a "From EUI to JUI" guide to avoid bricked devices.
You need to upgrade using Coolpad assistant, right?
I haven't made the move yet, but thanks for posting an organized thread. Going to upgrade my C103 soon.
Also, perhaps throw a link to GCam. Not sure which version/settings work best (haven't tested yet).
vulturext said:
Which module?
Click to expand...
Click to collapse
Generally friend, except youtube vance. For example viperx, ios emojis or systemless xposed?
Palm Trees said:
Maybe you should include a "From EUI to JUI" guide to avoid bricked devices.
You need to upgrade using Coolpad assistant, right?
I haven't made the move yet, but thanks for posting an organized thread. Going to upgrade my C103 soon.
Also, perhaps throw a link to GCam. Not sure which version/settings work best (haven't tested yet).
Click to expand...
Click to collapse
Coming soon. I don't have too much time at hand for now. Only some free time.
Edit : Guide to flash TWRP in EUI here : https://forum.xda-developers.com/android/development/guide-easy-twrp-root-using-qfil-eui-t3781171
reddsmokee said:
Generally friend, except youtube vance. For example viperx, ios emojis or systemless xposed?
Click to expand...
Click to collapse
Bro, viper4android is included in rom. Font changer is included too. I've installed busybox module from magisk manager and it's working fine. I don't use Xposed.
Very good rom, keep up the great work.
Hello, thank you for the great Work, the ROM works almost perfect.
BUT I have the Problem that my sim Card can't find any Connection at all. Before i flashed the ROM there was no Issue with it. Can anyone help?
Pavel0815 said:
Hello, thank you for the great Work, the ROM works almost perfect.
BUT I have the Problem that my sim Card can't find any Connection at all. Before i flashed the ROM there was no Issue with it. Can anyone help?
Click to expand...
Click to collapse
Have you tried creating new APN?
Yes, created new APN, checked Baseband, IMEI, Airplane Mode and so on, everthing fine. But at Testing Menu it says that Radio is turned off. (Wifi/BT is working)
Also, the SIM is not detected after a Reboot. I have to take it out and in again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features: Get from HERE
Flashing Instructions: Check This Post
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel Source
Download:
ROM: Click HERE
GAPPS: Already included
Changelog: Click HERE
crDroid Community Telegram.
If you like my work, consider a donation: My PayPal
Get flashing Instructions: HERE
This instruction is only for Windows user.
Linux user can execute commands manually.
Follow instruction properly.
Always take backup of your data before flashing
Once more
Hi, anyone tested if Android Auto works?
Installed this yesterday, the rom is very stable, works fast and has a lot of customization options.
Haven't found many bugs, all in all, great rom to try if you want to use android 11
Only major bug seems to be that NFC isn't working for me
NFC looks to be working now, not sure why in wasn't initially
NFC seems to still be spotty.
Sometimes it works properly, sometimes it can't be turned on
Not sure what it is, but a reboot "fixes" it (albeit temporarily)
Allways had CRDroid on my OP5T and my and my girlfriend has it on her OP6. At this moment i have XtendedRom 5 on my OP7TPro. If i change to this version, lost my encryption data?. Can i install it from fastboot without problems with my data or sdcard ?. THANKS.
New update is available now.
ElHechicero said:
Allways had CRDroid on my OP5T and my and my girlfriend has it on her OP6. At this moment i have XtendedRom 5 on my OP7TPro. If i change to this version, lost my encryption data?. Can i install it from fastboot without problems with my data or sdcard ?. THANKS
Click to expand...
Click to collapse
I've also flashed without loosing my internal data, But I can't take guarantee same will be haapen with you, So first take backup of internal before proceeding. First I've executed these commands:
fastboot erase system
fastboot erase odm
fastboot erase product
fastboot erase vendor
Then flashed CRDroid and no data loss. But still take internal data backup first just in case.
Really great rom thank you, i only have one bug so far, the right/left balance slider option don't work with Bluetooth ear buds.
How's the battery backup, anyone has any data for that?
madscenes said:
How's the battery backup, anyone has any data for that?
Click to expand...
Click to collapse
Excellent.
mukesh22584 said:
Excellent.
Click to expand...
Click to collapse
I tried the first build but had many UI glitches. Have they been fixed as I'm really temped to try out this ROM. (I went back to oos10)
Also a couple of questions:
1) Can I install OnePlus dialer? I like the raise to accept feature
2) Is the OP oos 11 camera app included or do I have to flash it myself. If so how?
3) OnePlus buds support? Can I just use the oneplus buds app or do I have to use something else?
Thanks for building for this phone!
mukesh22584 said:
New update is available now.
Click to expand...
Click to collapse
Fantastic news, can we get a changelog for the release?
Things I like to mention which probably aren't device specific but could be improved:
- Slide statusbar for brightness only goes down to 33%, not to 1%
- Fingerprint is misaligned in a lot of apps (so you see 2 FODs)
- Hold back to kill app doesn't seem to work properly, device vibrates as if an action was performed but the app doesn't get killed
- Hold power to enable flashlight doesd work, but would be better if a vibration was added for haptic feedback to the user
- NFC is still hit and miss, sometimes it does work, somtimes it doesn't
- Warning about SELinux every boot
- as an added option: Automatic enablement of DC Dimming under 15% screen brightness
Abaddon said:
Hi, anyone tested if Android Auto works?
Click to expand...
Click to collapse
Seems to work fine, tho I don't have an android auto compatible car, so I can't test it entirely..
The app seems to work tho
rom is great. smooth, customisable, didn`t found any bugs until now but have one issue that I quess is rom related, can`t install usb audio player from playstore, says app isn`t compatible with this version. I guess there are other apps that have this issue. other than that I like it very much! thanks dev!
SohrabHamza said:
I tried the first build but had many UI glitches. Have they been fixed as I'm really temped to try out this ROM. (I went back to oos10)
Also a couple of questions:
1) Can I install OnePlus dialer? I like the raise to accept feature
2) Is the OP oos 11 camera app included or do I have to flash it myself. If so how?
3) OnePlus buds support? Can I just use the oneplus buds app or do I have to use something else?
Thanks for building for this phone!
Click to expand...
Click to collapse
Please tell me what type of UI glitches.
1) No you can't install untill someone modded to use with custom rom.
2) No oos cam included and you can't flash/install.
3) I don't have oneplus buds so can't confirm.
Giblet-dono said:
Fantastic news, can we get a changelog for the release?
Things I like to mention which probably aren't device specific but could be improved:
- Slide statusbar for brightness only goes down to 33%, not to 1%
- Fingerprint is misaligned in a lot of apps (so you see 2 FODs)
- Hold back to kill app doesn't seem to work properly, device vibrates as if an action was performed but the app doesn't get killed
- Hold power to enable flashlight doesd work, but would be better if a vibration was added for haptic feedback to the user
- NFC is still hit and miss, sometimes it does work, somtimes it doesn't
- Warning about SELinux every boot
- as an added option: Automatic enablement of DC Dimming under 15% screen brightness
Click to expand...
Click to collapse
Your all provided info is correct, I'll try to improve as much as possible. Just get logs for Nfc if possible. Thanks for your info.
darkoj2007 said:
rom is great. smooth, customisable, didn`t found any bugs until now but have one issue that I quess is rom related, can`t install usb audio player from playstore, says app isn`t compatible with this version. I guess there are other apps that have this issue. other than that I like it very much! thanks dev!
Click to expand...
Click to collapse
I've tried and OTG USB Video Audio player installed without any issue.
mukesh22584 said:
Please tell me what type of UI glitches.
1) No you can't install untill someone modded to use with custom rom.
2) No oos cam included and you can't flash/install.
3) I don't have oneplus buds so can't confirm.
Your all provided info is correct, I'll try to improve as much as possible. Just get logs for Nfc if possible. Thanks for your info.
I've tried and OTG USB Video Audio player installed without any issue.
Click to expand...
Click to collapse
usb audio player pro*
can`t install it no matter what, clear play services, playstore with no luck
mukesh22584 said:
Please tell me what type of UI glitches.
1) No you can't install untill someone modded to use with custom rom.
2) No oos cam included and you can't flash/install.
3) I don't have oneplus buds so can't confirm.
Your all provided info is correct, I'll try to improve as much as possible. Just get logs for Nfc if possible. Thanks for your info.
I've tried and OTG USB Video Audio player installed without any issue.
Click to expand...
Click to collapse
Can we get a changelog?
fingerprint is not working so well some times. It said my finger moved too fast.
clean flash and works properly still not working