Develop Bugs

[ROM] [DEV STOPPED] JB AOSP 4.3 alpha 1 - Sony Xperia S, Acro S, Ion

JB AOSP 4.3 alpha 1 by LeTama​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*** DISCLAIMER ***
I'm not responsible if it breaks your device! Don't install it if you want something stable.
*** /DISCLAIMER ***
​
Be careful, this is a very preliminary build. Backup your stuff and expect problems.
DON'T TRY TO FORMAT any unformated external USB drive/key with OTG cable, it could format internal storage instead !!!
​
Introduction
Here is my port of JB AOSP 4.3 for our Xperia S. This is a work in progress, it's currently missing few of the patches I used in 4.2.X and few things are completely untested.
Installation and downloads
You need unlocked bootloader and a working recovery.
Download installation zip from here, mirror thanks to @androidlover007 (I know, uploaded.net is not the fastest of the earth, multipload mirrors coming soon. I'm not against posting any other mirror).
Copy it to internal storage
Wipe Data/Cache
Install gapps for 4.3. Currently, we don't have "official" gapps from CM team, I used PA ones with good success.
Reboot and let the rom settle down a bit
Important: Current release has a recovery with broken offline charging, you should flash a fixed one after installing the rom to avoid any trouble. Check this post.
Kernel source code is here (branch jb-4.2-experimental).
Note: this rom flashes its own kernel that comes with TWRP recovery and last version of Boot Manager. Just use volume up/down to navigate boot manager menu and power to select if you want to go to TWRP. Don't play with Boot Manager options if you don't know what you're doing.

Status
Working:
Display / 3D (with some stuttering, under investigation)
Audio (without LPA, won't add it)
Calls / SMS / MMS / Data
Camera (Pictures / Videos)
Bluetooth
Wifi
Wifi Tethering
Sensors
GPS
Hardware video encoding/decoding
Offline charging
NFC
SELinux
WIFI EAP. (untested, can anyone confirm ?)
Not working:
FM radio: I won't implement it in aosp with current proprietaries as they will conflict with 4.2+ bluetooth.
HDMI.
Auto brightness (disabled now)
And probably more, let me know
Missing
TRIM Support
Known issues
1080p video stuttering (waiting for new Sony firmware)
voip audio disabled, voip is going through normal channels (waiting for new Sony firmware)
Wifi direct disabled (waiting for new Sony firmware)
subway surfers game is not working
SuperSU not working. You can flash a working one here.

Changelog
2013/08/07 - Alpha 1
- SELinux added
- Media server crash on audio notification fixed
- Move to SD fixed
- Ril crash on some mvno fixed.
- SuperSU updated to 1.51
- 12 and 9M camera size
- Panorama fix
- Google backup selected as default
- EAP finished
2013/08/03 - Alpha 0

FAQ
Can I flash any kernel with it ?
No. This rom is using Nexus 4 proprietaries and requires matching video drivers. You must use embedded kernel.
Something is not working, crashed, whatever, how can I help ?
Please provide logs! Description is not enough, I need at least logcat and ideally dmesg. If phone reboots, go to recovery, get the /proc/last_kmsg file and provide it to me.
Dev options are missing ?
No, they're just hidden, it's now the default behavior in 4.2.x. To enable it, go to settings / about and tap multiple times on build number, menu will be enabled and stick after reboot.

* reserved, now you can go on *

Great And Fast Work.

Omg you are fast man
Sent from my LT26i using xda premium

Is there need to report bugs or it is too early for such thing?
Anyhow, I'm downloading right now, will report back with observations.
Log:
- Booting seems fine, some glitches but nothing to worry about...
- Font is kinda different, I like it, very much. It is even more close to Helvetica and for me it is very nice typeface porn
- Touch vibration is kinda shorter, more direct but weaker.
- Developer tools are updated with very nice features, everything mentioned at Google I/O 2013.
- Animations are smoother. It's not that "new ROM" smoothness, transitions between screens appear like constant 60fps, without that lag that sometimes occurs regardless on hardware.
- There are some differences in first time configuration, nothing radical but still...
- Google Play Store wont open, close it and relaunch and then it will show TOS. It lags a bit.
- Is it me or DPI is kinda different? Everything seems to be bigger. Icons in drawer, Google play apps... SystemUI feels kinda same. EDIT: 320dpi.
- AOSP keyboard icon is different. RAM usage is same, no lower usage or anything special. Available RAM - 622 MB.
- Touch responsivness seems a bit better.
- Texdroider DPI (DPI changer) doesn't work. On 4.2.2 it would work with OpenSEMC, but it's not the case on 4.3.
SuperSU does not work (no su binaries), this ROM is unrooted. To root it again do the following:
Download SuperSU 1.51 from here
Move it to your root folder on your phone
Turn your phone off, boot it into recovery
flash that zip you copied to your root folder "SuperSU 1.51"
Reboot to system.
Voila!

damn your way ahead of me
letama
Click to expand...
Click to collapse
Damn your way ahead of me,aw whell , ill try in 4.4 xD
PS did you use the google 4.3 source code or did you use Sonys Aosp source code... or did you port this from XZ??
still learning....

i love that warning about formatting otg drives d:

great
mirhl said:
i love that warning about formatting otg drives d:
Click to expand...
Click to collapse
i am so happy,now a android 4.3 developing for our xperia s.hope it is soon capable of daily use.THANK YOU to all developers :laugh: i love yall very much

switzerland92 said:
Is there need to report bugs or it is too early for such thing?
Click to expand...
Click to collapse
Yes, please do. I didn't run it for a long time, I really need feedback.
Envious_Data said:
Damn your way ahead of me,aw whell , ill try in 4.4 xD
PS did you use the google 4.3 source code or did you use Sonys Aosp source code... or did you port this from XZ??
still learning....
Click to expand...
Click to collapse
This is google 4.3 code, with my 4.2.x device tree and proprietaries. I'll take a shot at merging 4.3 kernel drivers soon.
mirhl said:
i love that warning about formatting otg drives d:
Click to expand...
Click to collapse
Burnt once! I didn't include 4.2 patch. Code changed, so it could work properly, but I have to test it first with a good backup

Ty bro
letama
Click to expand...
Click to collapse
hopefuly soon i will know as much as you
lets see if sony make a 4.3 or a 4.4 (sony themed)
i will definatly try to port that to an older device

Hey awesome letama! Are you going to release the ROM for loop? Tried your script but it didn't work. Thanks

letama said:
Yes, please do. I didn't run it for a long time, I really need feedback.
Click to expand...
Click to collapse
To keep it on one place and as organized as possible I'll edit my post with new info for you and others that are afraid to flash it right away
EDIT: Well, I don't have root. SuperSU says I must manually re-root and I must, quote, "consult the relevant forums for your device" which in this case is your thread

Someone please mirror i can never use uploaded.net
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk

Noob question: Can adreno 220 ever support OpenGL ES 3.0 ?

skifyr123 said:
Hey awesome letama! Are you going to release the ROM for loop? Tried your script but it didn't work. Thanks
Click to expand...
Click to collapse
Yes, script can't work. I will upload it tomorrow, it's prepared but untested.
switzerland92 said:
EDIT: Well, I don't have root. SuperSU says I must manually re-root and I must, quote, "consult the relevant forums for your device" which in this case is your thread
Click to expand...
Click to collapse
Check first posts, known issues sections, SuperSu is not up to date in the rom. There is a link to one that can be flashed and works...

I'm going to download as soon as I get home. About performance, similar to 4.2.2?
Enviado desde mi Xperia S usando Tapatalk 4 Beta

Ben36 said:
Someone please mirror i can never use uploaded.net
Click to expand...
Click to collapse
Electricity problem here, I lost my multiupload I'll restart tomorrow.

Related

Versioning explained:
>>>>>>>>>|0.92*|>>>> alpha>>>>>>beta>>>>RC>>>>1.0>>>>>
*0.92 will be removed as an option once RC comes out
This ROM is a spin-off from Mr. Linscue's and CyanogenMod sources.
What makes it different is that it is built with Linaro toolchain, current 4.7., instead of Google supplied one.
It's a product of my curiosity, Mr. Linkscue's extensive patience with helping me to understand the whole picture and his work so far on our devices. This wouldn't be possible without him.
To be able to build with Linaro toolchain there is a lot of CM source editing and git cherry-picking to make code fit for Linaro's GCC so the final ROM can actually be compiled. Thanks to Open Source, Android, internet and XDA-devs, I have been able to make it real by collecting the info and conveying it to this ROM.
I have to remind you, this is my personal build, it was never intended to be released to the wide public, I'm not a programmer/coder and there is no warranty.
Few notes:
1
The build: This is a first functional build through Linaro for this phone. It's compiled with -O3 flag, so /system (ROM) side is 90% optimized. I' m continuing to find proper code snippets that will further improve the build.​
2
Battery life. Kernel used is prebuilt Lenovo, therefore battery life should be similar to official ROM, bar the specific LenovoPower settings, however if you are installing CM you are expected to know how to manage your phone. Without Lenovo's updated kernel sources, further optimizations are not possible, either for performance or extending battery life. If you are experiencing poor battery life, there are two things, 1. You have just I nstalled the ROM, give it a few days for system to settle in. There are few things going on during first day or two that might deteriorate your battery life 2. You have an app installed that is keeping your phone awake, preventing it to go to deep sleep. You can install BetterBatteryStats from here: http://forum.xda-developers.com/showthread.php?t=1179809 and find the offending app.​
3
If you like it, use it. We are fixing general bugs as we go, and we know what those are. You may report them here but don't expect them to be fixed. Any app addition request or AOKP/MIUI/whatever port will not be entertained. As I said in the beginning, this is my personal build and I'm just sharing it with you.​
4
Why name it SENNA: Ayrton Senna: “And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.​This rom was made possible thanks to:
1.
linkscue​
2.
zuncun​
3.
xda-dev usersDJLamontagneIII, @Dri94​
4.
OpenSource​
5.
Linaro​
Sharing is caring, so if you want to repost this ROM to other places, I don't care but I do ask you kindly to refer to http://bbs.lephone.cc/k860/t570716/
Since 99% of the work is by Mr. Linkscue,take your time and drop by his thread: http://bbs.lephone.cc/k860/t553805/1/ and give him some kudos.
That's all.
Two releases:
SENNA 0.92
Latest CM source
Reverted the codecs to official, now video is ok
Updated busybox binary
Special thanks to linkscue on his continued support
SENNA beta 1
Kernel is built from Lenovo old source and adapted for JB
Both kernel and ROM are built with Linaro at O3 optimization level
Samsung's gralloc, hwconverter, fimg and kernel mali drivers, readjusted memory use, replaced ion libs.
Bloetooth works.
Disable HW overlays to have video working in landscape mode
(Current result on Antutu is 21605) (I have to note here that I have noticed performance deterioration, the number you get varies and drops on subsequent tests)
SENNA beta 1
[bugfix] *Wireless hotspot - so far ONLY open network is supported
*replaced Bluedroid stack with Bluez - core to UI - BT works now,
****please report special use cases if there are bugs.****
[enh.] *Screen off animation
alpha6 / kernel 3.0.40
* corrected schedulers in cgroups (oops)
* Latest lowmemorykiller
* lowmemorykiller autodetect oom_adj values
* added CPU topology patch
* added compaction and migration
* CPU unaligned access path
* Patched CRC32
* Replaced TreeRCU > jRCU (Read/Copy/Update)
* Replaced SLUB > SLQB memory allocator
* WasActive page flag
* Makefile optimizations
* disable preemption in machine_shutdown
* synchronize_rcu_expedited instead of synchronize_rcu
* patched fimg
* completely updated kernel internals
* completely updated net and fs layer
* completely updated memory management
* [bugfix] long press on touchscreen during charging has been fixed
alpha5 / kernel 3.0.15
* Added SIO IO Scheduler
* Added BFQ IO Scheduler
* zram enabled (one zram device in use)
* KSM enabled in kernel, use menu to on/off its use
Beta 1: http://pan.baidu.com/s/1892bL
md5: af12fd4fc63542858cba978a8b7f6f51
0.92: http://pan.baidu.com/share/link?shareid=1733734082&uk=2184427820
md5: 25dffc77e3e269656497fa382a3897ba
Google stuff:
If you visit Mr. Linkscue's thread here http://bbs.lephone.cc/k860/t553805/ there is a link to Gapps preload partition.
http://dl.vmall.com/c0zc102rqh
Flash it as you would do with the ROM and then go to Settings/Advanced/K860(i) Install gms. Reboot. All should be there. In the same menu you are also able to lock the MAC address so it doesn't change on reboot.
Github is here:
https://github.com/jason013?tab=repositories

Good job. Running on my k860 with no issues. I hope you try to keep updating this ROM.
I will update you with issues I face.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Stuttgart using Tapatalk 2

finch.****break said:
Good job. Running on my k860 with no issues. I hope you try to keep updating this ROM.
I will update you with issues I face.
Sent from my Stuttgart using Tapatalk 2
Click to expand...
Click to collapse
Thanks for liking it. I will keep it updated as much as possible. There are few bugs remaining on the platform and we are working on fixing them.
Definitely let me know if you have any problems with the ROM.

Good Job
This rom so good ! Waiting next update !

great room :victory:
waiting next update

finch.****break said:
Good job. Running on my k860 with no issues. I hope you try to keep updating this ROM.
I will update you with issues I face.
Sent from my Stuttgart using Tapatalk 2
Click to expand...
Click to collapse
btw how about gmaps? its work? coz i try to cm 10.1 phone reboot after i open gmaps,
Thanks before :good:

Harmalah said:
btw how about gmaps? its work? coz i try to cm 10.1 phone reboot after i open gmaps,
Thanks before :good:
Click to expand...
Click to collapse
Maps work for some time now.

first to vote for 5 star YAY
easily a 5 star for me since i dont know any programming/coding and im too lazy to do so...almost no support on lenovo ROM side so this addition is very much welcome...please keep it updated and kudos/respect to you my sir :good::good:
my only request would be a transparent and small on screen button for more screen orientation (see attached of my current screen)
you can get the systemUI here http://bbs.lephone.cc/thread-556541-1-1.html thanks thanks

Wow cool...will try ASAP
Sent from my Lenovo K860 using xda premium

innocence07 said:
easily a 5 star for me since i dont know any programming/coding and im too lazy to do so...almost no support on lenovo ROM side so this addition is very much welcome...please keep it updated and kudos/respect to you my sir :good::good:
my only request would be a transparent and small on screen button for more screen orientation (see attached of my current screen)
you can get the systemUI here http://bbs.lephone.cc/thread-556541-1-1.html thanks thanks
Click to expand...
Click to collapse
I'm sorry, you are talking about transparent taskbar? That iis as much as I could understand from the pics you posted.
To put it bluntly, what is going on now is trying to build kernel from source to match 4.2.2 and then cleaning up of proprietary files. Any UI polishing/additions I might consider at later date. So far, it seems to be a very far date But hey, it is functioning so far and sorry, but no..

relevant_placeholder said:
I'm sorry, you are talking about transparent taskbar? That iis as much as I could understand from the pics you posted.
To put it bluntly, what is going on now is trying to build kernel from source to match 4.2.2 and then cleaning up of proprietary files. Any UI polishing/additions I might consider at later date. So far, it seems to be a very far date But hey, it is functioning so far and sorry, but no..
Click to expand...
Click to collapse
yes both the onscreen button and the taskbar...its ok your the boss here anyways...and again thank you for sharing
i have another question uhm can i use this gapps http://wiki.cyanogenmod.org/w/Gapps since your rom is missing google play and other such gapps TIA

innocence07 said:
yes both the onscreen button and the taskbar...its ok your the boss here anyways...and again thank you for sharing
i have another question uhm can i use this gapps http://wiki.cyanogenmod.org/w/Gapps since your rom is missing google play and other such gapps TIA
Click to expand...
Click to collapse
Ok, I had skipped few tips here. If you visit Mr. Linkscue's thread here http://bbs.lephone.cc/k860/t553805/ there is a link to Gapps preload partition.
http://dl.vmall.com/c0zc102rqh
Flash it as you would do with the ROM and then go to Settings/Advanced/K860(i) Install gms. Reboot. All should be there. In the same menu you are also able to lock the MAC address so it doesn't change on reboot.

relevant_placeholder said:
Maps work for some time now.
Click to expand...
Click to collapse
btw how to fix USSD and change animated while charging ?
1. i try ussd not working and i used rillibrary.rar to fix ussd its working but signal bar not fully detect (how to fix)
2. and i could not charge if handphone is trunoff (how to fix)
thanks berfore

Harmalah said:
btw how to fix USSD and change animated while charging ?
1. i try ussd not working and i used rillibrary.rar to fix ussd its working but signal bar not fully detect (how to fix)
2. and i could not charge if handphone is trunoff (how to fix)
thanks berfore
Click to expand...
Click to collapse
Phone board/bootloader recognizes several operating modes like off charge, on, off, test etc. Mr. Scue identified them and it is working, however there is a problem that when you boot the phone after charging it in off mode, screen will turn white around the edges sometimes. For safety of your devices this part of functionality is not included yet.
I'm not familiar with the USSD problem yet. Will have a look into it, but if it wasn't working in official release, it could take time to make it working here.

relevant_placeholder said:
Phone board/bootloader recognizes several operating modes like off charge, on, off, test etc. Mr. Scue identified them and it is working, however there is a problem that when you boot the phone after charging it in off mode, screen will turn white around the edges sometimes. For safety of your devices this part of functionality is not included yet.
I'm not familiar with the USSD problem yet. Will have a look into it, but if it wasn't working in official release, it could take time to make it working here.
Click to expand...
Click to collapse
:good: thanks for explain

relevant_placeholder said:
Ok, I had skipped few tips here. If you visit Mr. Linkscue's thread here http://bbs.lephone.cc/k860/t553805/ there is a link to Gapps preload partition.
http://dl.vmall.com/c0zc102rqh
Flash it as you would do with the ROM and then go to Settings/Advanced/K860(i) Install gms. Reboot. All should be there. In the same menu you are also able to lock the MAC address so it doesn't change on reboot.
Click to expand...
Click to collapse
ive done all there is to do but still youtube dont work...em i missing something or youtube doesn't really work ???

innocence07 said:
ive done all there is to do but still youtube dont work...em i missing something or youtube doesn't really work ???
Click to expand...
Click to collapse
Ok, this questions now are going out of topic but let's chase this rabbit down the hole.
I am not familiar with the workings of youtube app (I assume you have successfully installed Play store and had it installed from there) so I am not sure what video/audio codecs it uses.
I can tell you right now one thing, related to video playback and Samsung's OMX codecs (the ****ty opensource ones) hw accel. video on this ROM is currently broken. I will soon reissue the ROM with files from official ROM to have that part working again, until I sort out what gets broken on OSS ones.
Currently I'm hands deep in kernel, I managed to transplant updated mali drivers into the old source to make it run on 4.2.2 and did some ugly hack job on HAL layer to have CM working, I have it at system stable level now. I'm tired and sorry for not being of much help, please google yourself and see what exactly are youtube app dependencies to make the videos run. If it uses on board hw codecs, I already told you what is the problem.
EDIT: try to disable GPU rendering for a test, in Developer options. just to see.

I flash several times this rom and always the same 2 problems ! Wifi doesnt work ! Stays there it said "turning wifi on..." and the 2nd camera program ( i dont remember the name ) always force close !!! Thanks
Sent from my K860 using xda app-developers app

what a great rom !! i hope you can fix the youtube problem and others minor problem soon!! :good:

Yup tried with GPU rendering disabled, HW accel enabled disabled.. Not just with youtube, videos don't work on many video content apps like imdb etc..
---------- Post added at 01:15 PM ---------- Previous post was at 01:15 PM ----------
However, wifi and focal seems to be fine

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
========== What is Omni ROM ?? ==========
Omni Rom Introduction
Omni Rom Homepage
Omni Rom Wiki
Omni Github
Omni Gerrit Code Review
Omni Bugtracker
========== Disclaimers ==========
As you all know, every human being is responsible for their own action and reactions, So you are flashing this ROM on your own risk. I am not responsible for any thing unexpected happen to your device.
========== Pre-requisite ==========
- Unlocked Bootloader with Rooted Xperia ZL
- Working TWRP/CWM recovery
- Knowledge about how to flash ROMs
- Patience
========== Downloads ==========
- Omni ROM-R1 (Oct/28/2013)
- Gapps
- For Root Access >SuperSu
========== Installation Instruction ==========
- First Time User of Omni Rom
1. First of all download all 3 zip and put it in your sd-card (Internal or external)
2. Backup of your current ROM
3. Wipe data/factory reset, wipe dalvik cache, wipe cache
4. Install zip from sd card, Flash Omni ROM, Gapps and Super SU.
(You have to flash all 3 zip)
5. Reboot your device and wait untill it boots, it might take some time to boot
6. Go through setup wizard, It will be little bit slow but don't get panic, wait until you finish setup wizard.
7. Now read trouble shoot guide if you experience screen flickering, otherwise you are good to go.
- Already On Omni ROM
1. First of all download all 3 zip and put it in your sd-card (Internal or external)
2. Backup of your current ROM
3. Wipe system, wipe dalvik cache, wipe cache
4. Install zip from sd card, Flash Omni ROM, Gapps and Super SU.
5. reboot your device and you good to go.
========== Troubleshooting ==========
1. To decrease screen flickers > Go to setting > About phone > click 6 times on build number to activate developer option
- Go to developers option > under hardware acceleration rendering > check on Disable HW overlays (You have to do this on every reboot)
- This will stop screen flickers.
========== Working/Not Working ==========
- This is early preview release, so don't expect that everything will work as stable release.
- However except NFC and Some screen flickers, this can be use as daily driver ROM
- Follow installation instruction and troubleshooting strictly and you will have less bugs in the ROM
- FM radio don't work
========== Credits ==========
- Omni ROM developers for source
- CM for cyanogenmod Source
- Google for Android Open Source Project
- Myself for Making this ROM
- x10forevers for thread format
​

Code:
[Oct/28/13]
- First Release
- Multi-Window Cherrypicked

Hi!!
You have screenshots??
Sent from my C6503 using Tapatalk

rkdss said:
Hi!!
You have screenshots??
Sent from my C6503 using Tapatalk
Click to expand...
Click to collapse
I just installed it today. It's AOSP so there's really nothing special about its looks. What do you want to see? I can get you some screenshots.
So far so good. It's pretty stable and it boots pretty fast! I noticed that this still uses '4G' instead of LTE, but a change for this was just committed for fusion3, so a new build will fix this.
The only major issue I have is that A2DP is not working. It doesn't see my car's bluetooth as having A2DP, it only detects it as Phone.

havanahjoe said:
I just installed it today. It's AOSP so there's really nothing special about its looks. What do you want to see? I can get you some screenshots.
So far so good. It's pretty stable and it boots pretty fast! I noticed that this still uses '4G' instead of LTE, but a change for this was just committed for fusion3, so a new build will fix this.
The only major issue I have is that A2DP is not working. It doesn't see my car's bluetooth as having A2DP, it only detects it as Phone.
Click to expand...
Click to collapse
Thanks, do not need.
You have helped me with the information!!

I paired my car's Blueetooth again and all the profiles showed up now. Was a weird bug in the first pairing.
LTE can be enabled using *#*#4636#*#* and selecting one of the LTE modes there, but you will lose this upon reboot and will have to do it again.
Other than that, it seems to be working well. I have some drain from Google Services (CacheUpdateService) but I've had this on stock Timescape and on CM, so it's probably an app or setting that I have been carrying over.

Nice to see omni rom here and nice to see mithun make a comeback. Thought you gave up on us buddy. Glad to see you're back.

devilsshadow said:
Nice to see omni rom here and nice to see mithun make a comeback. Thought you gave up on us buddy. Glad to see you're back.
Click to expand...
Click to collapse
Next build will be 4.4 OMNI . But am busy on N5 so dont expect any more roms/kernels from me

mithun46 said:
Next build will be 4.4 OMNI . But am busy on N5 so dont expect any more roms/kernels from me
Click to expand...
Click to collapse
Glad you got your hands on a N5. Got a nexus 7 2013 a few weeks ago as well. Also, any work you decide to do on the ZL is welcome, as little as it is.
Sent from my NEX7 v2.0

Nice!
Omni is still so new so I might wait a little bit, Im really looking forward to the multi-window/multi-task feature =)

Do you know if this version of the multi window has the version where the apps don't
pause when you toggle between the two multi window apps?
Like being able to open YouTube on top and browser on bottom and being
able to browse without the YouTube video stopping...
I'm not sure if that feature is what they called multi workspace or its just the
Newer multi window updated

hardbrick123 said:
Do you know if this version of the multi window has the version where the apps don't
pause when you toggle between the two multi window apps?
Like being able to open YouTube on top and browser on bottom and being
able to browse without the YouTube video stopping...
I'm not sure if that feature is what they called multi workspace or its just the
Newer multi window updated
Click to expand...
Click to collapse
It seems kind of buggy with youtube ATM, I tried it out and I can get audio going but I just get rotating circle unless I open a related video, but then it's still playing the original video so I have 2 videos playing at the same time.

TheTofu said:
It seems kind of buggy with youtube ATM, I tried it out and I can get audio going but I just get rotating circle unless I open a related video, but then it's still playing the original video so I have 2 videos playing at the same time.
Click to expand...
Click to collapse
I see, when I saw a youtube video of it on a Nexus 4, the person showed it worked without much problems with the camera and even
temple run + a messaging app or browsing...

hardbrick123 said:
I see, when I saw a youtube video of it on a Nexus 4, the person showed it worked without much problems with the camera and even
temple run + a messaging app or browsing...
Click to expand...
Click to collapse
That must have been a newer version of OmniRom. Maybe a newly compiled version would work better. I had forgotten we had that feature and just tried it on my ZL. I found the same thing you guys mentioned, the video on YouTube pauses when tapping anywhere on the other app.

havanahjoe said:
That must have been a newer version of OmniRom. Maybe a newly compiled version would work better. I had forgotten we had that feature and just tried it on my ZL. I found the same thing you guys mentioned, the video on YouTube pauses when tapping anywhere on the other app.
Click to expand...
Click to collapse
It doesn't pause for me, it just replaces the video with a spinning circle with audio still playing, but then again I have a modified youtube that allows HD and screen off playing(which is probably what's causing this).

TheTofu said:
It doesn't pause for me, it just replaces the video with a spinning circle with audio still playing, but then again I have a modified youtube that allows HD and screen off playing(which is probably what's causing this).
Click to expand...
Click to collapse
Oh ok. Yes, your modification is thinking that YouTube lost focus so that's why it only has audio. It would have to be modified in such a way that it continues to play the video and not just the audio.

Does the camera pause? if you are using the other app and have camera open in split, can you move the phone and the camera view is still in motion?

hardbrick123 said:
Does the camera pause? if you are using the other app and have camera open in split, can you move the phone and the camera view is still in motion?
Click to expand...
Click to collapse
I just tested it and no, the camera pauses when you interact with the other application

Thank you very much for this new ROM!
I hope you can get some time to work on this ROM for the ZL and add to it what somehow was/is lacking on your PAC rom which I'm
about to install on my ZL as I read it's stable and good! That thread is closed, so I just wanted to thank you for such an interesting and good looking ROM. n.n
I hope you can create for the ZL something like your PAC rom when 4.4 is oficial, too! n.n
- L.
Pd: This is a pic of my kitty, as a little way to thank you. Your girlfriend may like it ^-^

havanahjoe said:
I just tested it and no, the camera pauses when you interact with the other application
Click to expand...
Click to collapse
I see, most likely the build that had the no-pause multi-window updated was added after this first ZL build...

I guess you've been waiting for this for quite a long time.
So I felt I should upload at least something and stop keeping these builds secret.
Before we start...
This is unstable. VERY unstable, compared to my latest CM10.1 build.
By the way, I had to remove CM10.1 build environment because I have no space left on SSD. No more CM10.1 builds from me, sorry
On a positive note, this build has (compared to CM10.1):
Camera button options (wake/unlock/peek/playback control) — I put this feature upstream. Try it, it's cool
Flash sync is fine
KSM works again (it just magically fixed itself)
DSPManager doesn't suddenly get unloaded from memory and break your listening experience
Persian language for hardware keyboard. The whole hardware keyboard support has been reworked.
Newer Trebuchet, with live folders, icon pack support and other stuff
RAM is about 150 MBytes free with Theme Chooser enabled
Thanks to: (in no particular order)
Flinny
Flemmard
guest1
mosi110
kylon
szezso
nadlabak
Sources:
Local manifests: https://github.com/NeverGone-RU/Andromadus
Device tree: https://github.com/Andromadus/android_device_htc_vision
MSM7x30 common: https://github.com/Andromadus/android_device_htc_msm7x30-common
Kernel: https://github.com/Andromadus/htc7x30-3.0/tree/andromadus_4.3

How to install?
The usual process, nothing different here.
1: backup
2: wipe
3: install the ROM
4: install Google Apps. I prefer PA GApps "Mini Modular Packages".
How do I report bugs?
Now that's important.
I've set up an issue tracker to prevent cluttering this thread.
Keep in mind that a bug report without a logcat/dmesg or at least a precise description of a bug wouldn't help anyone.
If you stumble upon anything strange — try to reproduce it (and save a logcat, just in case).
Pro-tip: use "adb logcat -C" to colorize the output and make it easier to read! (not sure if this works on Windows, though)
Unfortunately, there are bugs that are caused by CM devs or Google (GApps are buggy, too). I'll close these bug reports, because I just can't fix that. I'm not a magician
Issues we already aware of:
EGL: flashy CRT animation (disable it) and buggy hwcomposer (icons/widgets suddenly blacked out is also caused by it). This was the major show-stopper.
Switching SELinux to Enforcing mode will instantly make the phone freeze. Don't do this!
Trackpad wake/unlock doesn't work, and there's no way to enable it. I use "pure" CM frameworks_base that doesn't have these features baked in.
Camcorder FCs when you try to un-pause video recording.
[Fixed] AOSP Keyboard FCs if you don't install GApps — install them
[Fixed] Mobile data is unstable — edit build.prop to fix the issue.
Issue you should be aware of: (non ROM-related)
Don't buy Samsung laptops, they have display hinges made of a sh*tty plastic.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Give me the download, already!
Google Drive link for 4.3.1: https://drive.google.com/file/d/0B5ahny5WGurFWDhhRnRWUDRMdUE/edit?usp=sharing
MD5 checksum: 657c81b1f46fd2987a175fa5ad66547d
Please don't make additional mirrors. Instead, ask me to mirror the file myself.
Why? I need to keep control of builds, and remove/replace them if something goes really wrong.

Kitkat?
While I still prepare my build environment for Kitkat and applying some patches to make it compile, you can have a build provided by guest1.
Initially, it was built purely for ringtone bug testing (factoid: every other htc msm7x30 device has ringtone shutting off randomly. I don't know why), but I think that'll do it for giving you an overview of what does CM11 look like at the moment.
This is even more unstable!
4.4 is also slower for some reason (probably because of different qcom_display repo used for it).
I did almost no tests with it, so there's probably a lot more to fix.
Google Drive link for 4.4: https://drive.google.com/file/d/0B5ahny5WGurFS1Z3N3N6V0xsSVk/edit?usp=sharing
MD5 checksum: 4ba38cc9fe4879687d0a279d0fbc0ced

Once this gets a tad more stable I am going to for sure try this out. I just flashed a fresh rom today and I'm trying to limit the fact I flash a rom at least 7-15 times a week (it's addicting, what can I say).

Re:[ROM] [14-11-13] Andromadus - CM10.2 - Vision
@NeverGone\RU you are a beast. Of course also thanks to @Flinny and the whole andromadus team. Does this use the same htc7x30 andromadus 3.x kernel as the previous builds?
Downloading now Btw hopefully I can get some logcats

HTCDreamOn said:
Does this use the same htc7x30 andromadus 3.x kernel as the previous builds?
Click to expand...
Click to collapse
Yeah, just a different branch (with SELinux enabled).

OMG!
OMG , I never expected KK for our device, btw i was too waited for this without any expectation
Once again thanking the guys who working on our devices :laugh::good:

great work Nevergone, thanks. I hope in some day we get Kitkat. I'm test it at this weekends.

great to see this, have downloaded and will give it a shot shortly. Have you, NeverGone, or have others, got an MD5 we could check against...I'm happy to post mine as a starting point:
657c81b1f46fd2987a175fa5ad66547d
---------- Post added at 07:54 PM ---------- Previous post was at 07:54 PM ----------
great to see this, have downloaded and will give it a shot shortly. Have you, NeverGone, or have others, got an MD5 we could check against...I'm happy to post mine as a starting point:
657c81b1f46fd2987a175fa5ad66547d

NeverGone\RU said:
Kitkat?
Wait for it.
Actually, this post is reserved for KK builds.
Click to expand...
Click to collapse
Cool!
I'll wait for KK if I can...

I think, that we'll wait for kitkat for a long time yet... desire z isn't as famous as earlier, community is less and phones with HW qwerty as well.
BUT I'm a still faithful user and BIG THANKS for this great piece of rom and great work from devs! Thank you!

great news!!!! thanks hitted

Let's not clamor for Kitkat yet. The Galaxy S4 got a stable-ish build of Kitkat just a few days ago, and it'll take a while for unstable builds to come out from the official CM tree. When that happens, development will trickle down here.
I mean, I would like to maintain my always-faithful-if-slow backup phone. It's gotten me through some times when my other primary phones went dead on me.

I get server connection errors in the Google Play store with this ROM and the linked GApps. Is anyone else having this problem?
I can actually connect to the store fine, it's the downloading or updating of apps that it errors out on.

Fafhrd42 said:
I get server connection errors in the Google Play store with this ROM and the linked GApps. Is anyone else having this problem?
I can actually connect to the store fine, it's the downloading or updating of apps that it errors out on.
Click to expand...
Click to collapse
Go to settings --> Storage --> And I think there should be a cache storage size for the sd card+internal rom, clear those, sign out of your google account then sign back in! At least I think those are the steps, I can't fully recall

That did it! Thanks! In all the years I've had an android phone I've never had to do that after flashing a rom.

Fafhrd42 said:
That did it! Thanks! In all the years I've had an android phone I've never had to do that after flashing a rom.
Click to expand...
Click to collapse
Yeah, from my research a few days ago on that problem it seems to be common in 4.3 roms for some unknown reason. I'm glad I could help!

I made an issue tracker.
That'd be easier to track bugs and get feedback without constantly quoting each other on forum pages. (because forums are linear)
I also decided to try to adapt some Sony/Samsung MSM7x30 changes. Maybe they've been more successful than we were?

If I were you, I would give up developing Android 4.3 and focus on preparing 4.4. But I am not a developer and I possibly don't know something so...
Anyway, thanks for making Android 4.3 happen on our Desire Z and good luck!
I will wait for 4.4 though.

TheReduxPL said:
If I were you, I would give up developing Android 4.3 and focus on preparing 4.4. But I am not a developer and I possibly don't know something so...
Anyway, thanks for making Android 4.3 happen on our Desire Z and good luck!
I will wait for 4.4 though.
Click to expand...
Click to collapse
Valid point.
The thing is, 4.4/CM11 is in early stage yet, and it will still need the same work I'm doing for 4.3 (plus, camera is broken on other MSM7x30 devices).
4.3 is at least able to boot

CyanogenMod 12 for the Xperia Z3
[STATUS]
Some vital functionality is still missing, mobile data being one of them and the camera being another. This build is therefore primarily targeted at developers and experimenting users.
NOTE: After booting up, try toggling wifi to avoid sleep issues.
[Working]
Touch Screen
Cellular radio
Bluetooth
Wifi
NFC (Temporarily broken)
Speaker audio
Adaptive Brightness
Gyroscope (Auto rotation)
Charging
Screen sleep (In lack of better term)
++++
[Not Working]
Mobile Data
Camera
Probably a lot of bugs and annoyances
++++
[Changelog]
>20141228
-- Updated CM12 sources with the new telephony stuff
>20141226 v2
-- Now using open source libril
>20141226
-- Android 5.0.2
-- 23.0.1.A.5.77 vendor libs update
-- New Audio HAL
-- Bluetooth improvements
-- Added missing proprietary service (modem related)
-- Thermanager updates (Results in very dim recovery though, sorry about that. Will fix asap)
-- NFC broken (Will get that up again, just didnt make it a priority for this build)
-- gsiff daemon still crashing. Remove it to improve battery life significantly.
>20141217
-- Added NCI HAL Module (credits: chirayudesai). NFC now works! (yay!)
>20141211
-- Kernel updates. Added several new modules.
> 20141210
-- Fixed the keymaster issues. systemui no longer crashes and security settings are now available. Bluetooth improvements.
> 20141209
-- Updated device config, kernel and CM12 sources (check Github for details)
> 20141201
-- Initial Release
[Installation Instructions]
Note: Do not flash unless you know what you're doing.
STEP 1 - Push the .zip file to your /sdcard partition. Boot into recovery and flash it. Make sure to do a full backup first. If you want to go back to a non CM12 ROM please flash a CWM recovery featured boot.img as the CM12 recovery is not exactly functional.
STEP 2 (Optional) - Flash Google Apps (Download Link)
[DOWNLOADS]
cm-1220141228-UNOFFICIAL-leo.zip
cm-1220141226-UNOFFICIAL-leo-v2.zip
cm-12-20141226-UNOFFICIAL-leo.zip
cm-12-20141217-UNOFFICIAL-leo.zip
cm-12-20141211-UNOFFICIAL-leo.zip
cm-12-20141210-UNOFFICIAL-leo.zip
cm-12-20141209-UNOFFICIAL-leo.zip
cm-12-20141201-UNOFFICIAL-leo.zip
NOTE: Be sure to wipe data if you're coming from a non-CM12 ROM.
[SCREENSHOTS]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[THANKS]
A big thanks to nycbjr for sparring with me and to everyone here who's spending their time testing, giving feedback and shoehorning in fixes and hacks.
XDA:DevDB Information
CyanogenMod 12 for the Xperia Z3, ROM for the Sony Xperia Z3
Contributors
Untouchab1e
Source Code: https://github.com/Zyg0te/android_device_sony_leo
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2014-12-01
Last Updated 2014-12-28

Just a suggestion, maybe you can have a look at krabappel's build, he has got system.ui working

gallardo5 said:
Just a suggestion, maybe you can have a look at krabappel's build, he has got system.ui working
Click to expand...
Click to collapse
Yep but that's AOSP and not CM12. I also have AOSP with a functioning systemui as well as a working modem.

@ Untouchab1e
Thank you very much for your work! I really appreciate that. I can't wait to have a fully working version!

owh my goodness, I've been waiting for a long time. thank you Mr untouchable.. I'm speechless. I can't wait to see cm12 running on my z3..

btw.. first leo cm12 is now available from fxp blog

iBuzman said:
btw.. first leo cm12 is now available from fxp blog
Click to expand...
Click to collapse
Where ? Link...

iBuzman said:
btw.. first leo cm12 is now available from fxp blog
Click to expand...
Click to collapse
I have tried this, WiFi is working but systemui crashes every time you lock your phone.
---------- Post added at 01:17 AM ---------- Previous post was at 01:17 AM ----------
SweDunda said:
Where ? Link...
Click to expand...
Click to collapse
Available here http://forum.xda-developers.com/showthread.php?t=2959665

I have fixed system ui issues by adb pushing SystemUI.apk from my latest 5.0.1 r2 lollipop aosp build - so I presume any aosp lollipop systemui apk will fix it. (all crashes gone - screen off charging now as I type)
Maybe this is a quick and dirty fix for your builds @Untouchab1e?
After pushing modem files, mba files and ril libs to fxp build my cellular connected up - meaning wifi, radio and SystemUI incl Screen Off/On all working :good: more details posted over in fxp cm12 thread

iBuzman said:
I have fixed system ui issues by adb pushing SystemUI.apk from my latest 5.0.1 r2 lollipop aosp build - so I presume any aosp lollipop systemui apk will fix it. (all crashes gone - screen off charging now as I type)
Maybe this is a quick and dirty fix for your builds @Untouchab1e?
After pushing modem files, mba files and ril libs to fxp build my cellular connected up - meaning wifi, radio and SystemUI incl Screen Off/On all working :good: more details posted over in fxp cm12 thread
Click to expand...
Click to collapse
Cool, wifi works too? Thought the bcmdhd wifi hal was broken for all bcm devices. Nice.

Untouchab1e said:
Cool, wifi works too? Thought the bcmdhd wifi hal was broken for all bcm devices. Nice.
Click to expand...
Click to collapse
yep ?

Yup, wifi seemed rock solid - 3G/LTE was totally on the fritz tho .. But, getting closer gents!

Xperia Z3
hey guys follow ibuzman's solution most of the functions work except one flawed the security under settings is inaccessible

yeah I have that too..
I used adb install to get around not having unknown sources checked.

nolihowell said:
hey guys follow ibuzman's solution most of the functions work except one flawed the security under settings is inaccessible
Click to expand...
Click to collapse
That is due to the AOSP systemui.apk I believe. The reason for the systemui issue in the first place is that the keyguard doesnt connect with the service and hence security settings wont work because the keys cant be handled.

I'll definitely root my z3 if this Rom works and can be used for day to day use..

Hi. I cant download the rom as link seems dead. And thats why im asking, does the sound work with this rom? I flashed cm12 from fxp thread and it doesnt, so I was jist curious, and I will flash it straight away if sound works

gallardo5 said:
Hi. I cant download the rom as link seems dead. And thats why im asking, does the sound work with this rom? I flashed cm12 from fxp thread and it doesnt, so I was jist curious, and I will flash it straight away if sound works
Click to expand...
Click to collapse
Link updated.

Untouchab1e said:
Link updated.
Click to expand...
Click to collapse
Flashrd, for now most of things working, except camera and mobile data bluetooth is not very stable as it has problems with connecting, but once connected (after few tries) its fine
Just to make everything clean, maybe some of issues are my fault because I fkashed something that I should not i fully wiped and flashed your rom, then cm12 gapps from here ( https://s.basketbuild.com/gapps ) and them modem.zip from this thread.
Edit: after some time with it (I will probably leave it as daily driver until it gets on my nerves enough ) I found few other issues:
Some apps have compability issues (e.g. xda loads, xperia z3 forum is still fine but when I go to subforum like advanced development, play store services crashes, and so does xda app. Everything loads in the background, I can see zverything behind the xxx has crashed message, but as soon as I press ok, it quits. Another one is facebook messenger, it is fine when browsing through conversation, but when I try to open one conversation, be it in app or from those small heads, it crashes).
Another issue is youtube (advertisements of course work, but the video I wanted to watch does not, it says "cant connect, press to try again")
Another issue is that every time I try to uninstall or clear data from any app, the phone does a soft reboot (shows bootanimatoon immediately)
The last issue I found is that bluetooth connects to my bluetooth headset, but sound stops working, just like in fxp CM, it just stays at 0:00 no matter what track I try to play.
Others issues are known, like camera or mobile data signal drops entirely for few seconds from time to time but I think it is also known.
I will keep testing it as for now it is workibg enough to be my daily driver so will keep it updated with anything that I find
Found another thing, but I wont really call it an issue and it made me laugh a bit. No matter how full your battery is, phone just keeps saying its low. Battery life is fine, but notification comes after few seconds of cleaning it, and it comes every time. Right now the notification says " battery is low! Battery level : 82%" but lets just call it a laughable feature

@gallardo5 thanks for your detailed feedback. Ive build and uploaded a new build. It would be great if you could check it out and see if there are any changes or improvements. I havent done any huge modifications. But I have been tweaking around with vendor libs and the device configuration and of course, updated CM12 sources which at this point can have a significant impact on functionality.
Thank you. I really appreciate everyone's effort to make this work! I am sure we will get CM12 running well together

I am not responsable of anything that happens to the device neither XDA​Hi i pressent my work for gnex for all it variants, the rom is divided into the main partitions of linux and they are different regarding updates , this decision is taken by me becouse of my little time to work in this kind of source proyects so all my advances regarding system , boot and recovery will be separally updated and compile , if you doesnt understand anything just keep on in the post for a while.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SYSTEM
It is based on aosp, and some optimiziation you can find in github all detaills.
Based also in DDK 1.9 and lastest OMAP4 AOSP commits
BOOT (KERNEL)
It is based on stock one and it is updated and change with github peoples commits
It is 3.0.11 + lastest OMAP4 AOSP commits
RECOVERY
It is based on TWRP , it update will be leased than system or kernel because if it works is less importants than other stuff.
Based on lastest TWRP 3.0
If you used TWRP 3.0 and isntalling gapps after 10min is not finnish reboot phone no problem
F2FS Data , Cache, system format can be done , only helpfull for DATA , but it you done it you will also wipe your SDCARD
How to install
For Recovery and BOOT update/install:
BOOT: fastboot flash boot NAME_OF_BOOT.img
RECOVERY: fastboot flash recovery NAME_OF_RECOVERY.img
For SYSTEM (ROM) Update/Install:
Go to TWRP, if it is first time flashing rom wipie factory reset DATA can be on F2FS or EXT4 your choice(I recommend F2FS)
Install: first ROM, second GAPPS(optional), third SU(optional)
DOWNLOAD
BOOT(Kernel):https://www.androidfilehost.com/?fid=24421527759889459
SYSTEM(OS/ROM):https://www.androidfilehost.com/?fid=24421527759881910
RECOVERY:http://www.mediafire.com/download/uizwqc9dwway4b9/twrp-3.0.0-tuna.img
CHANGELOG
BOOT:
27/02/2016:
812MBs RAM for user
11/02/2016:
New kernel based on Ziyan and OMAP4 AOSP + MY OLD COMMITS
756MB RAM
10/02/2016
Optimized GPU (-03 and disble some debug features)
Improve UI speed
GCC 6 support(not tested)
net: Performance fix for process_backlog
make clean kernel
08/02/2016
-03 optimizations
upstream google kernel 3.4
GGC 5 support (not working well)
Based on @zzpianoman kernel so all credits have to go for him
SYSTEM:
18/02/2016:
repo sync
RIL call issues work around
KSM tweaks and enabled
DEXOPT tweaks
SlimLauncher
OTA Support (Use OTAUpdater)
11/02/2016:
New soruce code based on lastest OMAP4 AOSP source
DDK 1.9
10/02/2016:
Corrupted build
09/02/2016:
BUG: need to add org.cyanogenmod.jar with filemanager from twrp adn chmod 755 for rom to boot (to by solve in next build)
Sync lastest compatible AOSP source
Add some optimizatiosn to ART. dexopts
Declare slow proccesor timeouts
RECOVERY:
08/02/2016:
TWRP 3.0.0
Fix not booting TWRP(init.recovery.rc add)
Credits
All people contribute to GNEX development on github , specially @zzpianoman and @Ziyan
Also the devs of i9000 for taking some ideas and commits: @sooti @Coldwindofnowhere and @humberos​

Is it an AOSP base rom?
Next versions will have any feature?
DDK 1.8 I imagine....

Nautilus74 said:
Is it an AOSP base rom?
Next versions will have any feature?
DDK 1.8 I imagine....
Click to expand...
Click to collapse
Yes DDK 1.8 , yes is AOSP this is why it is call Android Open Source Project, umm feactures cm ones regarding display colour and kernel improvements that we need a lot of them for having a good android i am working on kernel most of time

stucks on first install in recovery. fixing permissions lasts more than 5 minutres.
maguro
twrp 3
opengapps nano

girkev said:
stucks on first install in recovery. fixing permissions lasts more than 5 minutres.
maguro
twrp 3
opengapps nano
Click to expand...
Click to collapse
Fixing permisisions related to open gapps no? IF yes you can take out battery no problem and boot normaly
Also rom is not booting or what? Have you add org.cyangenmod.hardware.jar and put it in system and chmod 755

In a few hours full update with simplify installation and kernel optimizations , you can find changelog in first post enjoy it

werty100 said:
In a few hours full update with simplify installation and kernel optimizations , you can find changelog in first post enjoy it
Click to expand...
Click to collapse
Sorry for not having it , system is not making build complitly i dont understand why, but kernel wokr so in a few minutes i post kernel at the moment
Download kernel linK:http://www.mediafire.com/download/3cyt5bap995580b/AOSPKernelv2.img
Next relase will by based on lastes OMAP4 Github group commits and before my won optimizations , so this makes update to DDK 1.9 and also bug in camera lines and some more free ram much more ram almost a 1024mbs (experimental) on gnex
Also it will befull AOSP i think no features to modify system like batery icon gamma colors at less not in a native way, use kernel audior for get the best of gnex

Lastest build working well no error flashing it just a zip and just it... also there is no line on recorded videos , reocrd works a litle buggy but just when oppening video camera and starting video recording then works well..
Only problem is that there is only 756MB of ram and was supposed to be much more ... it is more clean thsi rom and also a litle more old...
http://www.mediafire.com/download/mloy7imb126y1ms/aosp_tuna-ota-eng.werty100.zip

Someone uses my rom?¿
I did not find any bug now i am swinching my sim to gnex to test it completly
I am messing up with new build to get more ram but i am getting crazy

@werty100 Thank you for your work.
I would like to fully try it, but each gApps pacakge gives me Play services force stop after boot. Could you please suggest, which package are you using, please?

Davoss said:
@werty100 Thank you for your work.
I would like to fully try it, but each gApps pacakge gives me Play services force stop after boot. Could you please suggest, which package are you using, please?
Click to expand...
Click to collapse
Yes it happen to my also now after formaiting i dont know why it was working on previous build well play services
I am loose wiht it i dont know what gapps toput i will try anothers looking for them

werty100 said:
Yes it happen to my also now after formaiting i dont know why it was working on previous build well play services
I am loose wiht it i dont know what gapps toput i will try anothers looking for them
Click to expand...
Click to collapse
With this gapps : http://www.mediafire.com/download/3yqm5pw8x6b357p/open_gapps-arm-6.0-pico-20151124.zip
Seem to work at lees for me install them go to applicatiosn and delete data from google paly and play serices enter into playstore and will get the same resault but only one time and then apps will download and work well

werty100 said:
With this gapps : http://www.mediafire.com/download/3yqm5pw8x6b357p/open_gapps-arm-6.0-pico-20151124.zip
Seem to work at lees for me install them go to applicatiosn and delete data from google paly and play serices enter into playstore and will get the same resault but only one time and then apps will download and work well
Click to expand...
Click to collapse
Thanks! Seems to be OK now.
But, for some reason my home buttons is no longer woking and quick setting from notification panel is missing as well? Could it se gApps related?

Davoss said:
Thanks! Seems to be OK now.
But, for some reason my home buttons is no longer woking and quick setting from notification panel is missing as well? Could it se gApps related?
Click to expand...
Click to collapse
For me works good the home botton , try to reboot ...
Also quick settings in notiffication panel you mean the gear that open menú?
If it this for me also works
Enviado desde mi Galaxy Nexus mediante Tapatalk

While I'm not using this ROM currently (just flashed Ziyan's Unofficial CM13), what I understand so far is the way to flash Gapps on Android 6.x is you flash the ROM and then immediately thereafter flash Gapps (so they are already installed when the ROM boots up for the first time). As for which Gapps package to install, the opengapps pico package is recommended...

Gapps
For the one's who have problems with gapps.. I've read somewhere that you need a gapps package which comes with "Android System Webview" because somehow google services need that app to add your google account. Otherwise google play services just Fc's. This could be incorrect but at least it worked for me. So you could try the aroma version of opengapps and select the minimal amount of apps but with Webview. I hope this can help..

Great ROM, smooth and stable.
I have installed OpenGapps PICO package because TWRP said NANO package is too large. After boot up, Google Play service repeated FC. So, I have tried general approarch ( delete Google account etc. ), and nothing changed. But I launched Google Keep, it told me that there are lack of permissions with Google Play services. I turned all of permissions ON, then FC stopped immediately. I hope this helps somebody in FC trouble.
In addition, SuperSU and Xposed and GravityBox works fine in my environment. Now I'm very happy with my Galaxy Nexus. Thank a lot, werty100.

ssakuma said:
Great ROM, smooth and stable.
I have installed OpenGapps PICO package because TWRP said NANO package is too large. After boot up, Google Play service repeated FC. So, I have tried general approarch ( delete Google account etc. ), and nothing changed. But I launched Google Keep, it told me that there are lack of permissions with Google Play services. I turned all of permissions ON, then FC stopped immediately. I hope this helps somebody in FC trouble.
In addition, SuperSU and Xposed and GravityBox works fine in my environment. Now I'm very happy with my Galaxy Nexus. Thank a lot, werty100.
Click to expand...
Click to collapse
A lot of thanks to all giving intructions how to fix the only issue we have found..
Is very stable and fast a litle lago maybe sometimes when going back from app drawer to start screen...
And the battery can someone post screenshot or comment the resaults they have
I think this ROM is the resurretion of gnex, because i was having it in a box...
PD: I am not having at the moment any issue regarding calls having signal loss like in other marshallow roms
Enviado desde mi Galaxy Nexus mediante Tapatalk

For these 3 days, there is no trouble with this ROM.
Maybe DOZE works fine, battery drains as much as Factory Image's with my usage, 3G at Office, Wifi at home.
So, I don't have a reason to switch to other ROMs.

ssakuma said:
For these 3 days, there is no trouble with this ROM.
Maybe DOZE works fine, battery drains as much as Factory Image's with my usage, 3G at Office, Wifi at home.
So, I don't have a reason to switch to other ROMs.
Click to expand...
Click to collapse
Regarding the issue of signal loss a few seconds in other roms i have experience it now in a call but never before on other calls
Well rom is very very stabe and fast battery drainis as stock or less for my
I am with finals exam just 13 days to finnish my 2 nd term . After that i will try to make a global update with new commits and hopfully another launcher to fix AOSP ones lag some times and try to implement init.d tweaks for battery and perfomance.