I bricked my phone (d 855 32 gb) before so now i flash 6.0 in my phone and the touch is not working properly,i dont know why and i dont have any hardware issue.Now i want to flash official stock firmware using flash tool but the issue is its showing model information verification failed. So plz help me to flash 4.4..
Related
Hi all - I've recently brought an Asus ZenFone 2 and want to upgrade it to MM so that I can use the root, unlock bootloader and install a custom rom on it using the tools in the development page.
However I am wary of updating the phone as the sellers website had this message:
Most of phones are supposed to sell in China (China version), such as ZTE, Letv, Asus, Oneplus.
1. About sealed original packing and firmware, We need to open the original box to check the phone and install the Multi-language and Google Play Store, Multi-language ROM not support OTA
2. Buyer can not restore to factory or root with other version firmware, which may cause date loss or dead of phone.
The firmware version is WW and recovery is also WW. When entering fastboot mode, the bootloader version is unknown and signing and secure_boot have a ? next to them. I am worried that upgrading it may brick the phone.
Is there a way I can update to MM? I may be worrying irrationally.
Thanks
IFWI version in bootloader is ?
Build number in settings about phone is ?
HI THERE!
I HAVE A HUAWEI GX8 UNLOCKED US VERSION RIO-L03 (RIO-L23)
I HAD BEFORE C567B141 ANDROID 5.1.1: download-c1.huawei.com/download/downloadCenter?downloadId=75372&siteCode=us
I'M FROM ARGENTINA , AND I NOTICED THAT THERE WAS A MM UPDATE, consumer.huawei.com/gt/support/downloads/detail/index.htm?id=86543 FOR RIO-L03, LATIN AMERICA AND DUAL SIM.
I INSTALLED THAT CORRECTLY , USING LOCAL UPDATE METHOD. (MY VERY WORST MISTAKE)
AFTER THE INSTALATION SUCCESS, I HAD NO SIGNAL, IVE TRIED EVERYTHING BUT EVERYTHING WAS THE SAME. I NOTICED AFTER THAT I HAVE ONLY 1 IMEI. SO I THINK THE HUAWEI STAFF UPLOADED THIS FIRMWARE WRONG AND WAS FOR SINGLE SIM , LIKE RIO-L01 I DONT KNOW.
AFTER THAT I HAD NO CHOICE BUT DOING A DOWNGRADE, UNFORTUNALLY THERES NO ROLLBACK PACKAGE FOR MY PHONE. SO I UNLOCKED THE BOOTLOADER FINE AND DOWNGRADE USING ADB (FASTBOOT FLASH CUST CUST.IMG (WITH ERROR) , FASTBOOT FLASH BOOT BOOT.IMG , FASTBOOT FLASH RECOVERY RECOVERY.IMG, AND SYSTEM) NOW IT WORKS FINE BUT I HAVE NO FINGERPRINT, EVEN IT ISNT ON THE SETTINGS MENU. I VE TRIED EVERYTHING, ROOTED IT AND TRIED TO ERASE CUST FOLDER AND FLASH THE 5.1.1 CUST, WITH ERROR, FLASH USING ADB AGAIN, NO RESULT , MODIFING THE CUST FOLDER, NO SUCCESS . TRIED TO FLASH AGAIN USING 3 BUTTONS, NO SUCCESS, EVEN LOCAL UPDATE OR ENGINEERING MENU . (SO NOW I HAVE THE RIO-L03C567B141 BUT WITH CUST / OEMINFO ERROR, AND NO FINGERPRINT)
I READ IN FORUM SOMETHING ABOUT OEMINFO, BUT I DONT KNOW WHAT SHALL I DO.
IN PROJECT MENU , VENEER INFORMATIONS, VERSION INFO IT SAYS: CUST VERSION : CVERSION: CUST, DVERSION: CUST (THIS IS SURE MY PROBLEM)
IN NETWORK INFORMATION QUERY , VENDOR COUNTRY INFO IT SAYS: VENDOR : HW, COUNTRY : USA (THIS IS OK, I THINK)
IN CUST FOLDER, HW, IS A FOLDER NAMED LA (THIS WERE SURE INSTALLED WITH THE LATIN AMERICA MM ROM), BUT THERE MUST SAY USA, NOT LA.
PLEASE I NEED YOUR HELP PEOPLE, I JUST WANNA HAVE 5.1.1 WITH THE FULL ROM INSTALLED CORRECTLY , USING ANY METHOD, BUT I CANT BECAUSE OF THE CUST OR OEM INFO, I DONT KNOW.
ANY HELP WILL BE APRECIATED . I JUST DONT KNOW WHAT ELSE TO DO
THANKS AND HAVE A NICE DAY.
First, use lowercase...
I think you should install android 6 stock, and install TWRP for nougat and use a custom rom in nougat. There is a lot of rom available for Huawei Gx8
Thx for replying, but which mm stock ROM shall i use? I need a gx8 real dual sim MM rom
Hi, check the thread fromf surdu_petru, there is something about no fingerprint and, i think, its solved flashing the modem from your 5.1 rom.
I dont know, maybe it can help you
Ive also tried that
I have a Samsung Note 8 inch. Tablet. 2012 model.
N5100 INU version
The original Motherboard got corrupted so i installed a new motherboard Ordered it from China / AliExpress.
As soon as I installed the new MotherBoard everything works fine. /
UPDATED Info
It was with Custom Firmware / CHINA Official . but device Status was Custom, I did not try to load Chrome/ GoogleFrameWorkServices APK. On this firmware which came with the mother board, but i did see some info about that.
The issue is they ship with China Firmware
I need STOCK INU firmware on this. Or any English firmware.
I download the N5100 INU Firmware I allso tried ODIN
I also tried SmartSwitch
I also tried Kies UPDATE / Initialization nothing has been working.
ODIN gives "failed to write / complete error"
SmartSwitch unable to connect unsupported device
Kies same error
I also tried to update/ initialize but the issue is after download 2 or 3 hour of Firmware it goes to 0% and says "failed to update" try to use recovery mode from abother compbuter and ask for recovery CODE.
I know i am missing some thing very small.
I checked the Device is not ROOTED
I see ODIN mode
Binary: Samsung Official
Device Status Custom
Custom Binary Download: NO
Maybe it is locked or something.
IDK
2nd issue
When smart Switch Ask for model and serial
I had 2 or 3 times put the Indian MotherBoard Serial Number
And it had Failed.
Now i am trying to Do this with China MotherBoard Serial Number.
If this time it succeeds i will be happy to inform you.
But this will still only load the Official China FirmWARE for CSC CHN
Anyways After this Maybe i will try ODIN
Since once it will have china official firmware
then it will have India ODN firmware via ODIN
But I could also go into a bad State here..
If the china guys sent me the motherboard with custom firmware which will support all india sim cards and etc. And now if i complete this official china firmware. I might get locked out !!
Dam i dont know what will happen and how i will solve this.
The ONLY solution someone has suggested who bought this same mother board and did it.
Said that " you need to make IMG of the original Country Firmware built into the Odin file and you also need all the files BL / CSC / PD etc.
I want HELP thanks
UPDATE:
Ok entering the China MotherBoard Serial Number smartSwitch installed the original China firmware back.
And now the Device status became
Official too.
That's 1 step ahead or backward idk.
So now I need to install India firmware via ODIN.
I assume if i use SmartSwitch and put Indian motherboard serial and after 2 or 3 hours of download it will not upgrade since it will try to match the serial number.
Anyways I just tired ODIN and it does not work. Same error
Complete (write) operation failed.
Any help please
So FINAL:
I am stuck with Original Official CHN / China Samsung Firmware on this n5100 And I cant do anything
GOOGLE Youtube / GMAIL / Play Store / ETC.
Question:
Is there a way I can load a Multi CSC Firmware 1st which will load VIA ODIN and then Once this is LOADED
I can load INU INDIA firmware ?
I dont know what is the CLASH
Where is the CLASH and CONFLICT hapening for ODIN not working
Thanks Please REPLY HELP ASAP
SideQ
Is there any Custom Firmware which I can load and be happy
Marshmallow ? Nougat ?
All features working :
GPS /
Camera/
WIFI
SIM Card
Network
Bluetooth
No errors ?
Thank you
I will still prefer a Stock ROM
hello please help me...
https://forum.xda-developers.com/galaxy-note-8-0/help/n5100-motherboard-china-csc-chn-help-t3659722
Reply to this topic..
Some one on the Aliexpress site told in review of the mother board that he installed your
http://www.theandroidsoul.com/samsu...n5100-wifi-philz-touch-advanced-cwm-recovery/
and then ... Install
CivZ-FlexNote8.0_KK-Rev2.1-N5100_signed
I need to install INU n5100 Firmware and Change CSC to INU
installed this... i dont know what that will do or help but can u please reply to my POST up there.
Thanks
I had bought a GS3 a few years back but never used it. Had some carrier issues as all the SIMs here in India were not supported. Ever since I bricked my Moto E, I decided to start using it again.
I realised that the sticker on the rear of my phone says it's I9300 (International Version) of the S3 but the firmware and bootloader in downloader mode shows it as SGH-747 which I believe is the d2att device. I decided to try and flash the I9300 bootloader and flash the I9300 firmware using Odin to sort my carrier network issues (modem difference issues maybe). Ended up causing a hard brick on my phone didn't turn on properly.
I used the bootloader debrick image from: https://androidfilehost.com/?fid=23501681358549813 and was able to boot my phone into download mode. I assume it's the I747 image which helped me turned on my phone although the battery and rear panel says it's I9300. Nevertheless, I downloaded the 4.0.4 firmware from AndroidMTK.com to flash on my bootloader to completely debrick the device. Downloaded the I747 as the debrick I downloaded earlier bootloader is I747 one.
I tried flashing the firmware and get the below error:
Code:
WARRANTY BIT: 1
BOOTLOADER AP SWREV: 3
SW REV CHECK FAIL: Fused 3 > Binary 0
Is my bootloader a Kitkat Bootloader? Am I flashing the wrong firmware? Should I flash the 4.4.2 firmware and see if it works? Would really appreciate if anyone could guide me here. I really want to unbrick my phone.
I can access my TWRP by using the debrick image from a SD Card. I tried booting into TWRP and Flashing CM 12.1, Lineage 14.1 and Slim 6. I have previously used these three roms on the device. Now, they won't boot after getting installed. I'm stuck at bootlogo when rebooting. Would appreciate any help.
Can anyone help out with this?
Are you able to determine the model # with the phone in download mode?
Since there is mention of "warranty bit", the phone must be running a 4.3 or newer bootloader which cannot be downgraded.
AT&T never released a full Odin-flashable firmware after 4.1.1.
audit13 said:
Are you able to determine the model # with the phone in download mode?
Since there is mention of "warranty bit", the phone must be running a 4.3 or newer bootloader which cannot be downgraded.
AT&T never released a full Odin-flashable firmware after 4.1.1.
Click to expand...
Click to collapse
The phone model is the SGH-747. It's the AT&T variant. Which firmware should I flash then?
Flash this: https://forum.xda-developers.com/ga...ile-sgh-i747ucufne4v4-4-2attall-odin-t3305899
Hey, i tried to install a stock firmware on my s9 SM-G960f and i have this error.
I readed a bit and find out that i need a new version of bootloader U2. Do u know maybe where i can find it?
or there is an another solution to my problem?
You cannot downgrade the bootloader, find one with the same version bootloader or higher than the phone is running (Check in download mode)
Sammobile, updato, samfirm tool