Develop Bugs

LG H815P FiX Can't find matched cust for NT-code mmc/mnc[], subset[]

Note : Do it at your own risk , i am not responsible to any damage you do to your device!!!!
with that being said let's cut to the chase
long story short i got a G4 H815p from South Africa about 3 days ago , it was running on lollipop and i decided to update it to Marshmallow , after reading few thread here on XDA i decided to flash a H815 KDZ seeing people in said thread said it was fine to do so ( and there was/isn't any Marshmallow kdz from South Africa ). I used LGUP and updated to marshmallow and once the device booted and was greeted with the error message Error current version is not available for user can't find matched cust for NT code .
At this point i must admit i was a little bit annoyed and i tried to find a way to get rid of that error message and unfortunately it looked like rooting ( which is not possible on the H815p cos of the lock bootloader) the device and deleting/editing the cust.prop file or finding a kdz that matched my regions were the only way out of my predicament. At that point i remembered facing the same issue some times back when i was using a G2 so with the help of XDA and Google i came up with a fix e for my Device but this Should also work on other H815p​
Before you proceed you check out this thread . it has info about LG G3 NT CODE and seems the G3 Code are about the same as the G4 ones
THE NT CODE YOU ARE GOING TO APPLY MUST MATCH YOUR KDZ REGION !!!!​
HTML:
http://forum.xda-developers.com/lg-g3/general/how-to-change-region-t2904951
step one
Know which region your Marshmallow kdz that you flashed is from ( in my case it is the Europe H81520C_00_1218.kdz , got it from http://storagecow.eu/index.php?dir=Xda/LG+G4/H815/Marshmallow+6.0/
step two
Enter LG G4 hidden menu using the correct code for your device . My device the code on marshmallow is *#546368#*815#*, i believe it is the same for all H815P got it from here http://forum.xda-developers.com/showpost.php?p=64142393&postcount=79
step 3
Apply code
enter hidden menu
navigate to SVC menu
Navigate to Version info
Navigate to NT Code , Make a backup of your current code and save it on your sd card just in case ( a screen shot will suffice ) and apply the code from you region , close then reboot your device and voila
Pictures s attached to the post to illustrate what was my NT Code before the fix and what it is after now after the fix​I tested the phone for 24 hours after applying the fix and everything work as it should , no network issues , calls, sms ,mms. wifi , bluetooth,Gps all work as they should
thanks to @YaDr , @JeremyChen

UP

Nice find
touns_j said:
UP
Click to expand...
Click to collapse
thanks i'm gonna use this one day. i reverted to LP after that annoying message and no root on MM. safe to say i will not buy a LG phone again as this locked bootloader crap has got me annoyed too.

anyone else tried this methond?

NTCODE WRITE ERROR - every time

Hi, NT WRITE CODE to me too, every time (rooted LG G4 815P). Any help? Thanks!

karoltom said:
NTCODE WRITE ERROR - every time
Click to expand...
Click to collapse
which device and firmware have you tried this on? i did this on my South African G4 H815P with the 20C European KDZ and till now i haven't encountered any issue ( i even went from the 20c kdz to the 20d kdz using LGUP and didn't have to do the whole process again)
vffzbr said:
Hi, NT WRITE CODE to me too, every time (rooted LG G4 815P). Any help? Thanks!
Click to expand...
Click to collapse
rooted G4 H815P ??? you don't need this process if you're rooted.. go to root folder , delete cust folder, reboot devices.

touns_j said:
which device and firmware have you tried this on? i did this on my South African G4 H815P with the 20C European KDZ and till now i haven't encountered any issue ( i even went from the 20c kdz to the 20d kdz using LGUP and didn't have to do the whole process again)
rooted G4 H815P ??? you don't need this process if you're rooted.. go to root folder , delete cust folder, reboot devices.
Click to expand...
Click to collapse
I did it also..just delete the cust folder. But if you choose like Genisys Rom you dont have that problem..

Many thanks. This method works for me. I've changed nt code from Poland P4 network provider to open Europe. Flashed V20D Firmware and everything works flawlessly .
Wysłane z mojego LG-H815 przy użyciu Tapatalka

I've managed to fix it with Root. No NT Code error and no carrier apps - http://forum.xda-developers.com/showpost.php?p=66957161&postcount=4

touns_j said:
which device and firmware have you tried this on? i did this on my South African G4 H815P with the 20C European KDZ and till now i haven't encountered any issue ( i even went from the 20c kdz to the 20d kdz using LGUP and didn't have to do the whole process again)
rooted G4 H815P ??? you don't need this process if you're rooted.. go to root folder , delete cust folder, reboot devices.
Click to expand...
Click to collapse
Thank you very much! Yes, I have a LG G4 (815P) rooted device, and after delete the cust folder, everything looks great now. My best regards :good:

Hi guys
Im quite new at this. But have flush a few phones in my time. 1st time to do a LG. I got a LG G4 H815tr. Want to change it to H815p. Reason is that most apps is in Turkey language. May i ask for afvise on this and how to change it. Many thanks guys

SN4K13 said:
Hi guys
Im quite new at this. But have flush a few phones in my time. 1st time to do a LG. I got a LG G4 H815tr. Want to change it to H815p. Reason is that most apps is in Turkey language. May i ask for afvise on this and how to change it. Many thanks guys
Click to expand...
Click to collapse
there's no way of "changing your H815tr into a H815p
' , what you can do it manually flash an unbranded H815

SN4K13 said:
Hi guys
Im quite new at this. But have flush a few phones in my time. 1st time to do a LG. I got a LG G4 H815tr. Want to change it to H815p. Reason is that most apps is in Turkey language. May i ask for afvise on this and how to change it. Many thanks guys
Click to expand...
Click to collapse
there's no way of "changing your H815tr into a H815p, what you can do it manually flash an unbranded H815 on your device using like the newly released 20h uk firmware here http://forum.xda-developers.com/g4/general/kdz-firmware-v20h-united-kingdom-2016-t3396480

help !
Region code that I can change for Global-ESA ? thank !

i have the same model Lg g4 H815p
h81510P_00 installed on it but when i upgrade it to MM
it shows the error even i can use my touch so i reset it and now i am stuck on the device setup after reset with the warning.
This is my current version installed on it H81520G_00
plese help me

Worked flawlessly on v29a H815, Applied NT code through hidden menu and "NT Code Write OK" Restated and voila..
Thanks.

I changed following in hidden menu NT Code, changed as below NT Codes with respect to firmware region... Rebooted after confirmation "NT Code Write OK" message.
V29a Firmware NT Code:
"1","FFF,FFF,FFFFFFFF,FFFFFFFF,11"
V20h Firmware NT Code:
"1","FFF,FFF,FFFFFFFF,FFFFFFFF,51"
Checked in both above firmwares..Worked flawlessly on my h818p...No more annoying message on every boot.
Software Version in about/ settings also changed to region exp. 20h-DS2-XX to 20h-ESA-XX upon reboot.
Is DS2 appears when cust mismatch...?

shahper1 said:
I changed following in hidden menu NT Code, changed as below NT Codes with respect to firmware region... Rebooted after confirmation "NT Code Write OK" message.
V29a Firmware NT Code:
"1","FFF,FFF,FFFFFFFF,FFFFFFFF,11"
V20h Firmware NT Code:
"1","FFF,FFF,FFFFFFFF,FFFFFFFF,51"
Checked in both above firmwares..Worked flawlessly on my h818p...No more annoying message on every boot.
Software Version in about/ settings also changed to region exp. 20h-DS2-XX to 20h-ESA-XX upon reboot.
Is DS2 appears when cust mismatch...?
Click to expand...
Click to collapse
How you could did it?
When I try to change NTCODE in Service Menu, I always get "NTCODE WRITE ERROR" message. Is your bootloader unlocked?

Whats the firmware ver. you are trying this on..?

[Request] ZS570KL recovery.img dump

Hello,
I bought a Zenfone 3 Deluxe ZS570KL Gold with the Snapdragon 821 and 64 GB of ROM.
In my country this device is exclusive of a carrier, but it works with every other carrier. The problem is that the dual SIM feature is disabled.
I can't flash the official Worldwide firmware because the recovery has a different SKU, specific to the carrier in question.
I would like to flash the original recovery, in order to install the official worldwide firmware, but I can't find it on internet.
Can someone help me?
Thanks in advance.

I don't think we can dump recovery.img without unlocking bootloader....
which is impossible as far as I know (at the moment)

I managed to flash the original firmware using fastboot. I converted system.new.dat to system.img by using this tool.
Now the device's SKU is WW, which is right. The problem is that the second SIM doesn't work anyway.

I flashed everything from the archive with fastboot, but the dual SIM settings menu doesn't appear.
By the way, the phone model is Z016S, while the "normal" one is Z016D. Perhaps the "S" stands for "single" and the "D" for "double"?

You could go to zentalk forums and report your problem over there, sadly with no bootloader for 5.7, we can't do much here until then. 5.5 is the only lucky for one for now to have unlock bootloader.

An ASUS Live Chat operator said that my specific model doesn't have hardware support for the second SIM, the problem isn't just software.
I guess I'll have to replace the phone with the right model...

Dany_81 said:
I flashed everything from the archive with fastboot
Click to expand...
Click to collapse
Hello !
I'm also looking to change SKU on my ZS570KL Z016S.
From SKU_TIM to SKU_WW.
I already converted system.new.dat to system.img.
1) What are all the files list to flash ?
system.img ; boot.img ?
2) Does the recovery partition need SKU matching with system.img ?
If yes, where to find recovery.img with SKU_WW ?
3) How to dump all my partitions images before flash ?
I want to backup my img with SKU_TIM if possible.
Thank you very much !

Why not just download the system image from Asus support?

Blues-n-Blazin said:
Why not just download the system image from Asus support?
Click to expand...
Click to collapse
Asus provide only zip image for SKU_WW and I have SKU_TIM.
I think the phone does not allow officially to flash a different SKU.
I don't know the good procedure to switch from SKU_TIM_4.11.40.1070 to SKU_WW_4.12.40.1698
Asus bootloader unlock tool is finaly out but require FW version 4.12.40.1698 and above.
Can you help me ? Thank you very much !

After preliminary investigation, I see that the SKU is defined in firmware emmc_appsboot.mbn & translated to the android prop via init in boot.img.

Dany_81 said:
Hello,
I bought a Zenfone 3 Deluxe ZS570KL Gold with the Snapdragon 821 and 64 GB of ROM.
In my country this device is exclusive of a carrier, but it works with every other carrier. The problem is that the dual SIM feature is disabled.
I can't flash the official Worldwide firmware because the recovery has a different SKU, specific to the carrier in question.
I would like to flash the original recovery, in order to install the official worldwide firmware, but I can't find it on internet.
Can someone help me?
Thanks in advance.
Click to expand...
Click to collapse
Here you go (SD820 variant): https://drive.google.com/file/d/0B8rpJsF4EG0YZ1FQSkUxRW9TdWs/view?usp=sharing

adwinp said:
After preliminary investigation, I see that the SKU is defined in firmware emmc_appsboot.mbn & translated to the android prop via init in boot.img.
Click to expand...
Click to collapse
I'm a very beginner with Android.
I installed ADB and Fastboot and everything works.
I can read properties with ADB :
[ro.build.asus.sku]: [TIM]
[ro.config.CID]: [TIM]
[ro.product.carrier]: [IT-ASUS_Z016S-TIM_Z016]
[ro.build.csc.version]: [TIM_ZS570KL_4.11.40.1070_20160922]
I'm looking to switch SKU from TIM to WW
I can't unlock bootloader because tool require FW version 4.12.40.1698 and above.
No one provides updates for the SKU TIM.
Now I downloaded your bootstock.img and recovery.img for SD820.
I converted system.img from official Asus system.new.dat (WW_4.12.40.1698).
What is the best way to change SKU ? (ZS570KL SD820 64GB)
Thank you very much !

Dany_81 said:
I managed to flash the original firmware using fastboot. I converted system.new.dat to system.img by using this tool.
Now the device's SKU is WW, which is right. The problem is that the second SIM doesn't work anyway.
Click to expand...
Click to collapse
You could make a guide of how did you change the sku? Thanks so much. I'm not able

Dany_81 said:
I managed to flash the original firmware using fastboot. I converted system.new.dat to system.img by using this tool.
Now the device's SKU is WW, which is right. The problem is that the second SIM doesn't work anyway.
Click to expand...
Click to collapse
Did you just flashed the system.img? Or any other partition?

kitnoos2002 said:
I'm a very beginner with Android.
I installed ADB and Fastboot and everything works.
I can read properties with ADB :
[ro.build.asus.sku]: [TIM]
[ro.config.CID]: [TIM]
[ro.product.carrier]: [IT-ASUS_Z016S-TIM_Z016]
[ro.build.csc.version]: [TIM_ZS570KL_4.11.40.1070_20160922]
I'm looking to switch SKU from TIM to WW
I can't unlock bootloader because tool require FW version 4.12.40.1698 and above.
No one provides updates for the SKU TIM.
Now I downloaded your bootstock.img and recovery.img for SD820.
I converted system.img from official Asus system.new.dat (WW_4.12.40.1698).
What is the best way to change SKU ? (ZS570KL SD820 64GB)
Thank you very much !
Click to expand...
Click to collapse
Hallo Kitnoos,
finally I have de-brand the zf3d w/o unlock the bootloader, w/o any data loss, just hold the breath for 5 minutes :laugh:
I've used sdat2img.py for convert the asus system.dat to system.img, looking for some guide here on xda... the required files are system.transfer.list and system.new.dat...
Now the phone tell me "WW.4.12.40.1698.20161228"... bye bye sku TIM :laugh::laugh:

macsax said:
Hallo Kitnoos,
finally I have de-brand the zf3d w/o unlock the bootloader, w/o any data loss, just hold the breath for 5 minutes :laugh:
I've used sdat2img.py for convert the asus system.dat to system.img, looking for some guide here on xda... the required files are system.transfer.list and system.new.dat...
Now the phone tell me "WW.4.12.40.1698.20161228"... bye bye sku TIM :laugh::laugh:
Click to expand...
Click to collapse
Hello !
Have you just converted system.dat to system.img(Raw EXT4) with sdat2img.py ?
Or after that you have converted system.img(Raw EXT4) to system.img with img2simg.exe ?
What is the size of the final system file you have flashed ?
Thank you very much !

kitnoos2002 said:
Hello !
Have you just converted system.dat to system.img(Raw EXT4) with sdat2img.py ?
Or after that you have converted system.img(Raw EXT4) to system.img with img2simg.exe ?
What is the size of the final system file you have flashed ?
Thank you very much !
Click to expand...
Click to collapse
i've used only sdat2img.py, because img2simg.exe won't work on my win10 virtualized...
then I've flashed system.new.img in fastboot mode, just "fastboot flash system system.new.img"
system.new.img is 4.026.286.080 byte (4,03 GB on disk)
enjoy your WW sku
:laugh::laugh:

macsax said:
i've used only sdat2img.py, because img2simg.exe won't work on my win10 virtualized...
then I've flashed system.new.img in fastboot mode, just "fastboot flash system system.new.img"
system.new.img is 4.026.286.080 byte (4,03 GB on disk)
enjoy your WW sku
:laugh::laugh:
Click to expand...
Click to collapse
Thank you I will try this week end !
Bye bye TIM and bye bye bugs

Dany_81 said:
I flashed everything from the archive with fastboot, but the dual SIM settings menu doesn't appear.
By the way, the phone model is Z016S, while the "normal" one is Z016D. Perhaps the "S" stands for "single" and the "D" for "double"?
Click to expand...
Click to collapse
Yes in Z016S, "S" is for Single :
Maybe it's not in the hardware and we can activate dual sim in the boot after unlock, like frequency band ?

Kitnoos gli aggiornamenti funzionano in automatico?
Update work?

Redmi Note 5 AI baseband /imei problem - Need help

Hi,
I have a redmi note 5 AI/Global which I've had problems with - it's unable to get a signal with the sim card. It lost the imei numbers (and I'm assuming Baseband) with a TWRP restore where the user tried restoring the efs/modem partitions. The phone does pick up the network, but it doesn't show any reception. The sim card works fine in another phone.
I have:
1. flashed the baseband using the model's qcn using QPST
2. Changed the imei back to default using the imei change tool
It's currently on the latest dev rom. I'd really appreciate some help with it

try to search for qcn for the same model and restore it on your phone, it will work for sure

I've been looking for it, unfortunately I haven't been able to find it - it's M1803E7SG

because your modem file corrupt ,try this method may be can help you... i try this at other phone is work !!
https://www.theandroidsoul.com/fix-...d-wifibluetooth-issues-restoring-twrp-backup/
try last method fastboot erase modemst1 , modemst2 than use miflash flash again your firmware

Download the same fastboot Rom version and flash it via mi flasher, don't forget to choose flash all

qcn
Hello keljian, I want to know if you found the qcn for RN5 M1803E7SG, if so, please share it with me, thanks

IMEI - LOST - Sim1 "0" Sim2 "0" plz HELP

Hello i have Global Device 6/128 GB unlocked.
i Successfull flashed xiaomi.eu_multi_MIMAX3_9.7.4_v10-9 Weekly and then i make full BACKUP with TWRP.
All just run fine.
Then i Updated via TWRP c...
Theni testet Ressurection Kernel 6.
After that i cannot use Fingerprint anymore.And cannot delet the Fingerprints that i learned with Phone.
Wiping Cache and Dalvik also didnt Help.
So i thoght its because the Kernel.
So i Dirty flashed again xiaomi.eu_multi_MIMAX3_9.8.1_v10-9 .
After tha the password of my phone didnt match.So i Make full WIPE of my Device "YES" in TWRP. FORMAT DATA.
Then i tryed to Restoere my Backup wich was make with TWRP.But it always Hangs on "SYSTEM Image" and FAILS.
So i tryed to make a new Install with xiaomi.eu_multi_MIMAX3_9.8.1_v10-9.
It boots and i can Use it but my IMEIs from SLOT1 and SLOT2 are "0" ...No imei.
Also it shows no Baseband and no Bluetooth Address.
MAc Adress is Present.
So i searched Internet that i have to restore the EFS Partition.
I done zthis but Imei is again not showing.
Is my Phone now bricked or is there a chance to get my imei back ?

Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.

mierlo420 said:
Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.
Click to expand...
Click to collapse
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...

majo3000 said:
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...
Click to expand...
Click to collapse
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319

eliaztheone said:
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319
Click to expand...
Click to collapse
this doesnt HELP.
I tryed it in TWRP
But again no EMEI Present after reboot =(

NEED QCN FIle.
After a long search i think i have to do this tutorial.But i need help !
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
I need a ".qcn" Backup File from another MiMax3 and the "imei" wich belongs to that backup and Phone from another Person.
if have this i can search the "Imei" in backup File and can Add my "IMEI" wich is present on my Phonepacking.
If someone can help me that would be very wonderfull. But better help me on "PN" ....
Tryed really all things.... i think that would help.
Things i tryed : Flash Modem , Flash Firmware , MIflash (fllashall),flash Persist ....and so on.....
Hope someone can help me

Mismo problema
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.

kacike69 said:
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Click to expand...
Click to collapse
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?

majo3000 said:
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?
Click to expand...
Click to collapse
I am in the same boat! exact same situation, did you manage to ever solve this?

[Moto Z2 | XT1789-x] Paritionning, modem and A/B general questions

Hi everyone,
I’m used to ROM flashing, programming and hacking some stuff using linux and other, but I currently stuck on a serious issue:
I am totally unable to fix modem issue on the Moto Z2 Force - “Nash” - XT-1789-06 FR/intenational.
I have another brand new stock XT-1789-04 “retail” on label but ATT software ready to be flashed !
I hope this post will help to anderstand both modem firmware and seemless A/B devices.
------------------
Here is my story as an example:
- I get a XT1789-06, factory reset it. All worked perfectly.
- I unlocked the bootloader with the motorola well know method. No trouble.
- I boot Lineage-recovery.img then install Lineage 16.0 from zip with adb-sideload
- It boot and works perfectly, I can call, use wifi etc... but when I restart, it goes into Bootloop…
- After few attempt to re reflash, may be I miss something, so i decided to return into stock-rom until I’ll find a way to fix this bootloop issue.
- As I don’t have any back-up, I start to find the stockrom zip.
- I find the great rom reprository for ‘nash’ :
- I’m questionning about de difference bettween RETAIL and RET.EU and other ? So I finaly flash the XT1789-06-RETAIL-OPSX
- The phone boot well but no sim Card detected and no wifi, no baseband, no IMEI, strange MAC wifi adress.
-This looks like a classical issue so I tried ALL the classic methode to fix it:
--- Fastboot erase modemst1/st2 erease carrier ..
--- Root it using Magisk (no problem) and tried the chmod something way.
Still same issue...
So I started to flash several different NON-HLOS.bin and FSG.bin (this two file only), and I find the XT1789-05 T-mobile file is working on my XT1789-06! (strange because my is XT1789-06 and the carrier is not TMO) Wifi is working, Sim card detected asking for PIN ok IMEI OK ….
But no network (Gsm,LTE,2G,3G,4G…) at all. The Baseband is shown as ‘xxxTMO”
It is the only NON-HLOS.bin wich detect my SIM card and turn on wifi.
All the other give me baseband not found, no IMEI, no wifi.
Could it be an issue with android 8.0 and 9.0 ? (I may have flash 8.0/9.0)
Now, I’m no more able to boot into lineage recovery, only TWRP is possible.
When I triy to install lineage Zip using TWRP it tell me “ERROR:X” (7 ?)
So here is some general question to clarify all modem question:
- What the file NON-HLOS.bin stand for ? What does it mean, from which source it come from and for what purpose ?
- What the file fsg.bin stand for ? What does it mean, from which source it come from and for what purpose ?
- Is is possible to flash only NON-HLOS and/or fsg.bin ? Does it need to be according to gpt.bin for partitionning ?
- Do yo know the exact file is needed for the XT1789-06 French/Europ
- How to know if a baseband is “locked” for a specific carrier ? Is the RETAIL sotck ROM totaly unlocked ?
- Do you think I can use T-Mobile baseband to access the French ‘orange’ networks ? The TMO modem dont ask me any “SIM-LOCK code” so it not appear to be locked, but no still no networks.
- Is it possible to change the networks/frequency/zone/technology by software methode ? (like by dialing *#*#4636#*#* we could select GSM only CMDA LTE ….. ) could someone to explain exactly for wich country is it applicable ?)
- What OPXS / OPX / PPX exactly mean ?
- Could Some one Clarify the “slot a / slot b” reason, usage, method of flashing boot … I suspect the underliying reason of the issue is about the two slots.
- When we flash NON-HLOS to modem partion, why we usaly erase modemst1/2 after that ? When we choose ‘modem” partition, is it slot_a, slot_b or both ?
- What is the carrier and OEM partition ?
- Is it possible to make a backup of a fully working machine, then applying only the “modem” or “persist” partition to another same exact model phone ? (I’m about to buy a brand new one to dump the exact modem file)
- Is there a way to get the full (even unofficial) source code for hardware part of the motorola nash ?
- What about a blank flash ? Do you think it could be a way to recover the modem ?
- Could the Qualcom serial debug be a way of un-bricking it ? Then, how to boot EDL ?
- Please clarify the what we exactly have to flash on A/B slot to avoid boot loop ?
I am very commited to deleted all the Google bloat stuff from motorola mobile so I bought a brand new 17896-04 and I will try a new round :fingers-crossed:
I hope this post will defenitely clarify the handeling of modem issue be cause lot of us seems to have serious trouble.
Thank in advance,
Best regards,
R-A-F

The problem are the updates, screw the modem data, and we are so much people who have this issue, we trying to solve this, pls stay tune