Develop Bugs

[FIX/TOOL] Backup/Restore/Fix IMEI & Data Restore Tool v3.5 - Updated 03/22/2013!!!

[FIX/TOOL] Backup/Restore/Fix IMEI & Data Restore Tool v3.5 - Updated 03/22/2013!!!
USE THIS AT YOUR OWN RISK AS QPST WILL FLASH JUST ABOUT ANYTHING YOU TELL IT TO. I AM NOT RESPONSIBLE IF YOUR PHONE BECOMES MORE BRICKED THAN IT ALREADY IS, EXPLODES, OR TRANSFORMS INTO A SITH LORD AND ATTACKS YOU WITH A LIGHT SABER!
Verizon Users please refer to this thread HERE for IMEI and Roaming fix.
Click for Screenshots in Post #4
FILES YOU WILL BE NEEDING
DOWNLOAD QPST V2.7.378 from HERE
(if you have build version 2.7.385 please let me know)
Fix for Data Issues (Stuck on EDGE/2g) see Post # 3
(Sasktel users custom App has not been updated for you guys cause I am still in need of additional data)
How to get to DIAG Mode
**AOSP ROMs to get to DIAG Mode see Post #2
Option1:Stock ROM (Stock Dialer) dial *#7284#.
Option 2: Stock ROM (No Stock Dialer) flash this file HERE!
Install QuickShortcutMaker.
Open it and type IOT in the search box.
Click on the entry that says IOTHiddenMenu / IOTHiddenMenu / com.android.hiddenmenu/com.android.hiddenmenu.IOTHiddenMenu
Click OK
STOCK ROMS: In the hidden menu or PhoneUtil menu select USBSettingsMenu choose the correct mode and click ok.​
To get started put phone into RMNET + DM + MODEM mode (DIAG Mode)
Connect your phone to your computer using your USB cable (Stock cable will work best no guarantees with any other cable).
You might need these if your phone won't connect USB Drivers.
Look in device manager under ports and serials you should see your phone there.
Now open QPST Configuration click on ports tab and then on Add new port button type in COM## where ## is the port number your phone is connected to.
To make a backup:
Open Software Download from the Start Clients menu.
Click on the Backup tab.
Make sure your phone is listed under port.
Select a location to save your backup (recommended).
Click Start and wait for it to finish.
You should now have a QCN file of your NV Data.
Save the file in a safe place.
To restore:
Open Software Download from the Start Clients menu.
Click on the Restore tab.
Make sure your phone is listed under port.
Select the location you saved your backup to.
Click Start and wait for it to finish.
The phone will attempt to restart if it fails don't panic just manually reboot your phone it may take longer than usual but you should be fine.
IMEI Injection:
Please see Post #3 for IMEI Injection + Data Restore All in one App and Instructions
or
Inject IMEI with QPST
Open RF NV Item Manager from the bin folder found in Program Files folder/Qualcomm/QPST
(RF NV Manager is no longer accessible from the start menu or from inside QPST Configuration).
Click on Setting menu in RF NV Item Manager and select Comport.
Select your phone from the list of ports and click ok.
Go to File menu and select Read From Phone.
You will get a list of NV items and their values from your phone.
Look for item NV_UE_IMEI_I it will be item number 550 you can do a search for it using the search.
If you are unable to find it you will need to add it in
Go to Option => Customize NV Item List.
Then look for the item on the left and move it to the right.
Click OK now you should be able to find it.
NEVER ADD AN ITEM THAT YOU DO NOT KNOW THE CORRECT VALUE FOR YOU CAN DAMAGE YOUR PHONE IF YOU DO SO!​
On the right you will see a set of 9 text boxes this is where your IMEI should be.
Click the Hex Check Box.
The Hex values for your IMEI will consist of no more than 2 characters per a box and must match your IMEI or it will not take the values you enter. The IMEI is also listed in a special order so you must follow this guide to ensure your IMEI is correct. The first box will always be an 8.
Example if your IMEI was: 954091051099226 then the boxes would look like this:
8
9a
45
90
01
15
90
29
62​
Click on the button Write NV to write the values to your phone.
Once they have been written reboot your phone and check to see if your IMEI has been restored.
If IMEI is correct and you are stuck on EDGE/2g go to Post #3.
Remember to go back into the Hidden Menu and set your USB Settings back to MTP + ADB once you are done!!!!
________________________________________________________________________________________________
Thread Rules:
Do not ask how to spoof IMEI or how to clone IMEI you will be ignored!
Do not answer someone who asks for information on IMEI spoofing or cloning!
Please do not ask questions unless you have used the Search option!!
Please do not use this thread as a place to settle out any ill feelings towards each other or any other developments!!!
Please do not ask questions that have already been answered!!
Please do help each other when at all possible!!
Don't hesitate to have fun while we all try to figure this problem out!
If I do not answer you right away it's not because I don't like you it's because I have a family, a job, a life outside of development that needs tending to!!
Also thanks to jroyalty, zmore, drothenberger, David Dee, PureMotive, Bigbyte.me, GerardAnthony, Amoamare, <>, XDA, and everyone who donated their phone data for research =)
DX
I don't ask for donations (I do this cause I enjoy it) but a nice latte every now and then late at night is quite refreshing while developing...lol

________________________________________________________________________________________________
AOSP Roms
Added scripts as downloadable files for those who may want them that way.
Place phone in and out of DIAG Mode by running these scripts.
Script to enter DIAG Mode (RMNET + DM + MODEM Mode)
Code:
echo 0 > /sys/class/android_usb/android0/enable 0
echo smd,bam > /sys/class/android_usb/android0/f_rmnet/transports
echo diag > /sys/class/android_usb/android0/f_diag/clients
echo 1 > /sys/class/android_usb/android0/f_acm/instances
echo rmnet,acm,diag > /sys/class/android_usb/android0/functions
echo 1 > /sys/class/android_usb/android0/enable
Script to return to MTP(eject first)
Code:
echo "" > /sys/devices/virtual/android_usb/android0/f_mass_storage/lun_ex/file
echo 0 > /sys/devices/virtual/android_usb/android0/enable
echo "mtp,acm,adb" > /sys/class/android_usb/android0/functions
echo 1 > /sys/devices/virtual/android_usb/android0/enable
vold

Custom App updated current support is for AT&T, T-Mobile, Bell, Telus, and Rogers. I am in need of anyone with a working Sasktel phone in order to get this working for Sasktel.
Updated to version 3.5. Added IMEI Injection Checkbox.
Download - SGS3 Data Restorer App
This custom app will create a QCN file that can be restored to your phone after you inject your IMEI back into your phone and find yourself with data connection issues. This is only used if you had lost your IMEI and did not have a backup created!!
Instructions:
Create a QCN backup of your phone using QPST (see OP for instructions).
On a Windows Vista or higher computer download the app and install it.
Once installed, close the app.
Go to start menu, you will find app under DanX and run it.
(If there are any new updates the app will find it.)
Select your Carrier
If you need your IMEI injected then click the checkbox next to "Inject IMEI"
Upload your QCN backup into the app.
If you clicked the checkbox a window will pop up at this time asking for your IMEI.
**Enter it exactly how you see it on the back of your phone.
Select a save location and create a save name.
Verify that your IMEI is correct.
Click "IMEI Verified" button.
Wait and the QCN should be generated.
Go to the location where you saved the QCN.
Go to QPST and restore file into your phone (see OP for instructions).
Manually reboot your phone.
If you have a slow connection still but you're no longer on 2g reboot again.
If you still a have slow connection after that consider flashing stock again through Odin and then generate another backup using this app.
You can also try flashing a different modem and then generate another backup using this app.
If it still is not working respond to this thread.
I do not guarantee any success and results may vary on how badly you have screwed your phone!
I am not responsible if you screw your phone worst than it already is as QPST is a deadly phone weapon use it at your on risk.
DX
I cannot guarantee release times as I do this on my spare time but I promise I will try to keep this updated as long as I can. Though the coffee may keep me up I do sleep every now and then if you used the app and you liked it please donate it pays for coffee.

Screenshots
Great emergency resource.
Now everyone can start flashing again like it's going outta style.
--------------------------------------------------------------------------------------------------
EDIT: Added some screenshots of the process to reassure whomever it helps:
1_SAM_GS3_EXPLOITER_By_GeeK_finished.png
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1b_Hidden_menu_screenshot_montage.jpg
2_win7_drivers_after_changing_to_RMNET_DM_MODEM.png
3_QPST_InstallShield.png
4_Device_Manager_Phone_COM_Port.png
5_QPST_Add_New_Port.png
6_QPST_Port_Added.png
7_QPST_Software_Download_BackupNV.png
8_QPST_RF_NV_Manager_WRITE_IMEI_TO_NV.png
This last screenshot is for people who haven't already backed up their IMEI but want to try forcefully writing it back. The example 15-digit IMEI number I used (but didn't actually write) was: 123456789012345

Awesome.
If confirmed, please make an app that we can all donate too. This will be most beneficial to you and the community.
Thank you for the countless nights
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

I'm more interested in the IMEI injection. If someone has already lost their IMEI and can simply inject their original IMEI back into the phone then we're golden (not that you shouldn't have a backup just in case, but it's nice nevertheless).

Haha look whose got their own thread! great work man look forward to this being confirmed so we can all breathe a sigh of relief!
Sent from my SGH-I747 using Tapatalk 2

Thanks man! You are a life saver for many. Your work is much appreciated.

The only thing I'm confused is secured and unsecured kernel.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

As soon as this is confirmed working I think it will be time to fulfill our promise of donating to the one who solved this issue

We need links to insecure kernels for Canadian carries unfortunately

rgoyena said:
The only thing I'm confused is secured and unsecured kernel.
Click to expand...
Click to collapse
An "insecure" kernel is one in which adb automatically gets root access. This is required for GeeK's mod to work. If you are on UCALEM, you can flash the one from here. (There are others, too.)
If you're running the LG1 stock kernel, you can install the "adb insecure" app. Run it and click the box to make your kernel insecure, then use GeeK's mod. This is what I did and it worked perfectly.
EDIT: "adb insecure" should work for any kernel, including the Canadian ones.

rgoyena said:
The only thing I'm confused is secured and unsecured kernel.
Click to expand...
Click to collapse
Just to add to what drothenberger said: in secure mode, when you adb shell into your phone, you have to use 'su' post-login to become root:
Code:
$ adb shell
[email protected]:/ $ su
[email protected]:/ #
This is a pain, because you can't directly do stuff like "adb push foobar.apk /system/app/" without being root first, which is what the insecure mode fixes. Newer versions of CyanogenMod also now have a root settings menu that gives you even finer grained control of this.

It does work for Can carriers, I confirmed that in the other thread. Take a look at my mini guide there: http://forum.xda-developers.com/showthread.php?p=29462669
Sent from my SGH-I747M using XDA Premium HD app

I'm running faux kernel for att.
About adb. Now this is a problem for me. Never used it and always tried to avoid using it. Lol
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

rgoyena said:
I'm running faux kernel for att.
About adb. Now this is a problem for me. Never used it and always tried to avoid using it. Lol
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
kernel doesn't matter as long as it is stock. The app will make it insecure. Adb is something essential if you are flashing.
Sent from my SGH-I747M using XDA Premium HD app

Hey this is awesome! I hope it is confirmed working! I have one quick question. When you say that you have to be on a stock rom, do you mean "stock" stock as in, the stock rom the phone came out of the box in, or does it still work on a stock based rom (like a debloated/deodex rom, with mods etc?)

drothenberger said:
An "insecure" kernel is one in which adb automatically gets root access. This is required for GeeK's mod to work. If you are on UCALEM, you can flash the one from here. (There are others, too.)
If you're running the LG1 stock kernel, you can install the "adb insecure" app. Run it and click the box to make your kernel insecure, then use GeeK's mod. This is what I did and it worked perfectly.
EDIT: "adb insecure" should work for any kernel, including the Canadian ones.
Click to expand...
Click to collapse
I'm on LG1 and I used adb insecure, purchased from the Market (gotta support Chainfire, the man rocks!). It all worked flawlessly for backing up my IMEI.

ViralCipher said:
Hey this is awesome! I hope it is confirmed working! I have one quick question. When you say that you have to be on a stock rom, do you mean "stock" stock as in, the stock rom the phone came out of the box in, or does it still work on a stock based rom (like a debloated/deodex rom, with mods etc?)
Click to expand...
Click to collapse
stock based, not aosp. I am on k747 Sammy kernel and it worked
Sent from my SGH-I747M using XDA Premium HD app

SOOOO happy now I can start flashing away when i get my s3 on monday!

[ROOT / TWRP][D851 ONLY][OSX/Linux/Windows] Root/TWRP your TMO G3 with PurpleDrake!

Howdy all!
What's this? Read on, dear reader, to discover the magic that is PurpleDrake.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?
This is a utility to easily root your LG G3 (specific models only). It's a fairly foolproof script that includes all the dependencies you'll need for getting your phone rooted easily.
This is the FULL version. This means that it will automatically root, and ask you if you want TWRP installed and a custom boot that doesn't trip the root checker!
Click to expand...
Click to collapse
Who made this?
This root is a collaboration between myself (IOMonster), jcase, and autoprime.
Special thanks also to beaups for some initial guidance looking at the vulnerable application.
Thanks to @Shelnutt2 for the security-disabled boot.img
Thanks to @Dees-Troy for the TWRP image!
Click to expand...
Click to collapse
Is my phone compatible?
The new LG G3 models each are slightly different with regards to rooting and unlocking.
To see a matrix of which LG G3 phones are compatible with this root, please see this Google Docs spreadsheet that we've compiled.
When you run this program, your phone will reboot and run a test to see if it's compatible. If the application succeeds, it'll let you know that it's able to permaroot you. If not, it'll fail gracefully and reboot you back to normal Android without having changed anything.
Please note that this version is currently only compatible with the T-Mobile D851 version of the LG G3. For other phones, we suggest you look for the LITE version of PurpleDrake.
Click to expand...
Click to collapse
How do I use this?
WE NOW SUPPORT WINDOWS! YAY ME
To start, for either platform you'll need to scroll down to the download section and get the file.
Ensure that your phone is in ADB mode (PTP Mode for everyone but Verizon. Verizon users need to be in "Internet"/"Ethernet" mode)
Linux Instructions (in a terminal!)
Extract the file you downloaded...
tar xvf ~/Downloads/PurpleDrake-TMO_VERSION.tar.gz
Mark the application as executable, and run it!
cd PurpleDrake-TMO
chmod +x purpledrake_linux.sh
./purpledrake_linux.sh
OSX Instructions (just a bit easier)
Extract the file you downloaded
Double-click on "purpledrake_osx"
Windows Instructions
Extract the file you downloaded
Double-click on "purpledrake_windows"
The application will guide you through all the steps you need.
You will still need to install SuperSU from the market after installing PurpleDrake. This pack does not include one.
If you choose to install the custom boot.img, your phone's root checker will not be tripped and your phone will show as UNROOTED.
After, be sure to check @autoprime's post for how to disable OTA upgrades! here : http://forum.xda-developers.com/showpost.php?p=54254111&postcount=2
Click to expand...
Click to collapse
But, what if I don't want to run your script to root?
Well then, I'd be a little hurt, but you can still do everything the script does manually.
Download the package, and extract it. Open a terminal in the main folder of the archive and run these commands:
Code:
adb reboot --bnr_recovery
adb push ./assets/start_restore /temp/start_restore
adb push ./assets/permaroot.bin /temp/start_restore
adb reboot
That will perma-root you, however there's no protection from doing something stupid or the phone being incompatible. Please be careful!
Click to expand...
Click to collapse
Where do I get this?
WINDOWS/OSX/LINUX VERSION OUT NOW!
- Fixed Windows support
- Fixed OSX ADB issues not detecting phone first try
- Fixed race conditions leading to errors permarooting
- Added 64-bit Linux ADB
Code:
[url]http://downloads.codefi.re/thecubed/lg_g3/purpledrake/PurpleDrake-TMO_R03.tar.gz[/url]
Old version here... (OSX/Linux only)
Code:
[url]http://downloads.codefi.re/thecubed/lg_g3/purpledrake/PurpleDrake-TMO_R01.tar.gz[/url]
Please DO NOT mirror or re-upload the PurpleDrake software to your own site, or any other file host.
If you need drivers for Windows (thanks @autoprime for having these handy!):
Verizon Drivers: http://downloads.codefi.re/autoprime/LG/LG_G3/LG VZW_United_WHQL_v2.14.1.exe
Everyone Else: http://downloads.codefi.re/autoprim...leDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe
Click to expand...
Click to collapse
Help, it doesn't work!
Post here, let us know what happened and we'll try to help you. DO NOT private message us on XDA or on IRC asking for help. We will not assist privately.
Most questions if not answered here can be answered on #lg-g3 on IRC in Freenode.
Click to expand...
Click to collapse
Thanks so much! How can I show my appreciation?
Since this was a collaboration project, proceeds that are made from this root will be split between amongst us so we can purchase a Sprint test phone to root (as it's currently not rooted).
If you'd like to donate to us, click the "Donate to me" button on the left sidebar under my name, and be sure to enter a comment to let us know that you're donating towards the PurpleDrake project.
Thanks again!
Click to expand...
Click to collapse

FAQ:
Q: I'm running the Windows .bat as administrator and it's closing/not working.
A: There is no need to run the .bat as admin. Just double-click and run.
Q: I get the "Windows cannot find '.\assets\windows\bin\mintty.exe'." error.. watdo?
A: Try just double-clicking on the .bat instead of running as admin.
Also make sure the script is extracted properly first before running.
Q: I [used Flashify and] am stuck in fastboot.. how can I get out?
A: Be cautious using Flashify as it seems it's not working right.. or people are hitting the wrong buttons with it.
HERE are the stock TMO D851 partitions.
Use fastboot to flash recovery(TWRP or stock) and stock boot. This will install TWRP and fix booting into rom.
If on Windows you will need fastboot drivers. Use Google to find fastboot binaries and drivers.
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot reboot
The commands to flash TWRP manually instead of using flashify is below.
Place TWRP on the root of your internal /sdcard/ using MTP, downloading it directly to phone or using ADB push.
Code:
adb push name_of_file.img /sdcard/
adb shell
su
dd if=/sdcard/name_of_file.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Disable OTA:
Open LG Hidden Menu (3845#*851#) --> WLAN Test --> OTA Setting --> OFF
*Replace "851" with your devices model number, 850, 852, 855 etc...
The first D851 update has been released (10M). Bootloader remained unlocked. It would appear future OTAs will be safe to take AS LONG AS YOUR PHONE IS NOT MODIFIED! If you have flashed TWRP or installed xposed or modified /system then you need to restore any changes made or flash stock firmware (tot/kdz) before taking OTA.
If using a non-tmobile g3 I would be hesitant about taking OTA updates. An OTA may update the boot stack to block Bump!
EFS Backup:
Code:
[FONT="Arial Narrow"][B]Backup EFS after jailbreaking your G3. EFS is split into 2 partitions modemst1 and modemst2.
img files will be on root of internal sdcard. Save the .img files somewhere else besides the sdcard... email, cloud, etc..[/B]
DO NOT FLASH OTHER PEOPLES EFS OR FLASH YOUR OWN BACKUPS ONTO ANOTHER PHONE.
THIS WILL BREAK EFS ON THE PHONE YOU ARE FLASHING TO. EFS BACKUPS ARE FOR THE PHONE THEY CAME FROM ONLY.
I have made a new thread on EFS backup and restore which can be found [URL="http://forum.xda-developers.com/lg-g3/development/efs-lg-g3-efs-backup-restore-t2907329"]HERE[/URL].
[/HIDE]
[B][SIZE="5"]Restoring Stock / Remove root flag:[/SIZE][/B]
[HIDE]
Download the tmo .tot file and use lg flash to restore it to stock. itll format everything on internal sdcard so backup anything u may need off it.
T-Mobile firmware can be found [URL="http://downloads.codefi.re/wolfgart/LG_G3/D851"]here[/URL]. Thanks to [user=608699]@wolfgart[/user] for the files and [user=1157052]@thecubed[/user] for codefire hosting.
*Step by step picture guide - [url]http://imgur.com/W83hMPE[/url]
install the drivers.
put phone into Download Mode (power off. unplug USB. pull battery. put battery back in. press/hold Volume Up then plug in USB cable.)
In Windows Device Manager set the phones serial COM port to #41. (*see picture guide for help)
Install [URL="http://downloads.codefi.re/autoprime/LG/LG_G3/Setup_LGFlashTool_1.8.6.527.zip"][B]LG Flash[/B][/URL]. In "C:\LG\LG Flash" folder delete megalock dll. Replace with .dll below.
new megalock dll - [url]http://bit.ly/1cQADXm[/url] (this site includes a "download manager.. UNCHECK THE BOX before downloading dll file.)
Run LG Flash in the "C:\LG\LG Flash" folder. Select korean factory if asked.
When LG Flash opens you will see a box to select firmware and dll.
Select [URL="http://downloads.codefi.re/autoprime/LG/LG_G3/LGUP_8974.dll"][B]LG Flash .dll[/B][/URL]
Select (.tot)
Hit OK (*see picture guide for help)
Hit yellow start button. If you get Milkyway error click ok. LG Flash will then run a crc check on the tot file. Takes a bit.
After crc check finishes unplug the phone. plug phone back in. it should now be seen in LG Flash and start flashing.
Phone will reboot when finished. You may end up on a screen with s "2"... let it sit there for a minute or two.
If stuck on "2" try unplugging the usb cable from the phone.. wait 10 seconds.. then plug the usb cable back in. now wait 30 seconds and hopefully it changes to a "3"
Once the phone says "3" you can unplug the USB.. remove the battery and plug back in.. boot back up... you are now 100% stock.
[/HIDE]
[B][SIZE="5"]PurpleDrake YouTube Videos:[/SIZE][/B]
[HIDE]
[url]https://www.youtube.com/watch?v=wJtz51KgxjM[/url]
[/HIDE]

And where is the bootloader unlock talked about at the bounty thread or was it just a hoax?
Gesendet von meinem LG-D855

Tectas said:
And where is the bootloader unlock talked about at the bounty thread or was it just a hoax?
Gesendet von meinem LG-D855
Click to expand...
Click to collapse
Hoax? What?
This pack is ONLY for the T-Mobile G3 which has an unlocked bootloader out of the box.
D855 support is NOT included in here. There will be a separate thread when we have an unlock for the bootloaders of the rest of the G3 family.

Tectas said:
And where is the bootloader unlock talked about at the bounty thread or was it just a hoax?
Gesendet von meinem LG-D855
Click to expand...
Click to collapse
There is no boot loader unlock..where ever you read this is misinformed...the T-Mobile variant ships boot loader unlocked, it is the only one so far to be shipping unlocked.

Sweet

thecubed said:
Hoax? What?
This pack is ONLY for the T-Mobile G3 which has an unlocked bootloader out of the box.
D855 support is NOT included in here. There will be a separate thread when we have an unlock for the bootloaders of the rest of the G3 family.
Click to expand...
Click to collapse
I'm aware of that and sry it wasn't meant offensive or to put this one down, autoprime, did imply at the bounty thread, that you as well managed to unlock the bootloader, at least at the beginning, that's what I'm referring to, sry that i said it the wrong way, was a bit disappointed, which for sure isn't your fault or the one of this tool, it's still great progress you made.
Gesendet von meinem LG-D855

I wish the international G3 D855 will be unlocked too
Sent from my LG-D855 using XDA Premium 4 mobile app

Great glad to see this released thank to all that is involved
LGG3 and beyond

All my family is sleep in the room with my Mac will be running asap bright and early. Thank you for your hardwork

Thecubed, autoprime, shelnutt2, jcase, and whoever else....thanks for this. Truly appreciated! Can't wait for Windows support. :Cheers:
Sent from my LG-D851 using XDA Premium 4 mobile app

Plans to support recovery for D855 in the near future?
Need to know to sell or not the G3 ?

What the hell software compatible with a mac that's a 1st whoop whoop well done guys and thanks for the hard work

Yeah great time to be a Mac owner

I have a feeling this treads about to turn in to a "when will this version be supported" topic :/
LGG3 and beyond

Success!
1. THANK YOU!
2. It didn't work the first time around, temproot worked but permaroot did not. Maybe it had to do with the fact that I was reading this forum while it was waiting for my input... I can't see how that would have made a difference but whatever. [[ Edit: It worked the second time running, I just followed the instructions immediately - no problems. /Edit ]]
3. Just a reminder for Linux users ... you have to add udev rules as described here: http://developer.android.com/tools/device.html ... and when you are done with that, also run:
$ sudo service udev restart; sudo killall -9 adb
4. My G3 would only connect to my laptop (Ubuntu 14.04) when it was in PTP mode. MTP or Charge Only did _NOT_ work... Only PTP.
5. THANK YOU AGAIN! You devs rock!
Frank.

Same as the guy above didn't work the first time but worked perfect the second! OSX here.

@ OP
http://forum.xda-developers.com/lg-g3/general/s-carrier-specific-g3-threads-t2818549

I keep getting no such file or directory, going to re download drivers and see

@thecuba not telling you what to do but maybe put this on T-Mobile thread as well http://forum.xda-developers.com/tmobile-lg-g3/development
Hope you don't take it the wrong way

[TUT] [ROOT] Backup restore IMEI manually

Automatic Backup Restore IMEI TOOL by Sector1369 is HERE .
(Only Require Custom recovery)
Automatic backup restore CMD script added by "deadlyindian" at Post#5
(Require PC ,ADB drivers & Root permissions )
If you still want to do this manually, look below
IMEI backup of redmi 1s
Require ROOT permissions
We all known that EFS partition holds the imei,sn ,wifi mac & other important data.
In Snapdragon the EFS partition are modemst1 ,modemst2 & FSG partitions. so it's important to take backup of these partitions.
1.connect your phone to PC , adb debugging enabled & goto adb shell by,
Code:
adb shell su
OR
Open terminal emulator app in your phone & take super user permissions, by
Code:
su
2.type following commands to backup imei partitions.
Code:
dd if=/dev/block/mmcblk0p16 of=/sdcard/mmcblk0p16_modemst1
dd if=/dev/block/mmcblk0p17 of=/sdcard/mmcblk0p17_modemst2
dd if=/dev/block/mmcblk0p20 of=/sdcard/mmcblk0p20_fsg
also these are some important partition you should consider to backup.
modem, fsc, bk1, ddr.
Code:
dd if=/dev/block/mmcblk0p23 of=/sdcard/mmcblk0p23_modem
dd if=/dev/block/mmcblk0p9 of=/sdcard/mmcblk0p9_DDR
dd if=/dev/block/mmcblk0p12 of=/sdcard/mmcblk0p12_bk1
dd if=/dev/block/mmcblk0p18 of=/sdcard/mmcblk0p18_fsc
Now the backup is stored in you internal storage ,store these files in safe place.
in case u get invalid imei or unknown, restore these partitions.
To restore these partitions,
Code:
dd if=/sdcard/mmcblk0p16_modemst1 of=/dev/block/mmcblk0p16
dd if=/sdcard/mmcblk0p17_modemst2 of=/dev/block/mmcblk0p17
dd if=/sdcard/mmcblk0p20_fsg of=/dev/block/mmcblk0p20
dd if=/sdcard/mmcblk0p23_modem of=/dev/block/mmcblk0p23
dd if=/sdcard/mmcblk0p9_DDR of=/dev/block/mmcblk0p9
dd if=/sdcard/mmcblk0p12_bk1 of=/dev/block/mmcblk0p12
dd if=/sdcard/mmcblk0p18_fsc of=/dev/block/mmcblk0p18
Working on Aroma EFS backup restore tool..
NOTE:-
Don't use tools or commands from other device because different devices has different partition address, that will result in wrong backups.
To use this method to backup other phones EFS , u should find your partition info.
Redmi 1s Partition tables can be found HERE
ENJOY,

Thanks man...it would be alot helpful if i gone to any trouble [emoji7]

But the problem with lost imei is for Redmi with MediaTek processor. Redmi Qualcomm don't suffer from this problem.

pgreed said:
But the problem with lost imei is for Redmi with MediaTek processor. Redmi Qualcomm don't suffer from this problem.
Click to expand...
Click to collapse
i know but it's always better to take bakup,who knows what 'll happen...
there is no way to generate imei,wifi mac data for qualcomm (as far as i know) ...
so it will come handy...

Auto IMEI Backup & Restore Tool
Backup restore IMEI Automatically
FIRST INSTALL THE ADB DRIVERS FOR THE 1S ► GO HERE ◄
Requires Phone to be ROOTED & USB Debugging turned ON
This is for Xiaomi Redmi 1S Only
I've created a CMD script that will automatically backup the IMEI & Also Restore it back again if you want to...
Backed Up files are inside MYIMEI folder of your selected backup storage.
NOTE : Enable root access for adb if you're on Custom ROM based on CyanogenMod
to do that ► Open Settings ► Superuser ► Superuser Access ► Select Apps and ADB ► done
► Download it from attachment
► Extract it
► Run R1SBAR.exe & follow instructions.
While restoring make sure the backed up files are inside the MYIMEI folder of either Internal Memory or External or it wont work.
If you face any error do tell me!
AGAIN ITS ONLY FOR REDMI 1S

deadlyindian said:
Backup restore IMEI Automatically
Requires Phone to be ROOTED & USB Debugging turned ON
This is for Xiaomi Redmi 1S Only
I've created a CMD script that will automatically backup the IMEI & Also Restore it back again if you want to...
Backed Up files are inside MYIMEI folder of your selected backup storage.
► Download it from attachment
► Extract it
► Run R1SBAR.exe & follow instructions.
While restoring make sure the backed up files are inside the MYIMEI folder of either Internal Memory or External or it wont work.
If you face any error do tell me!
AGAIN ITS ONLY FOR REDMI 1S
Click to expand...
Click to collapse
It working perfectly.Thank you.

pgreed said:
It working perfectly.Thank you.
Click to expand...
Click to collapse
You're Welcome :good:

[Backup restore IMEI Automatically] works like charm. thanks :good:

lavizta said:
[Backup restore IMEI Automatically] works like charm. thanks :good:
Click to expand...
Click to collapse
im glad it help :good:

deadlyindian said:
Backup restore IMEI Automatically
Requires Phone to be ROOTED & USB Debugging turned ON
This is for Xiaomi Redmi 1S Only
I've created a CMD script that will automatically backup the IMEI & Also Restore it back again if you want to...
Backed Up files are inside MYIMEI folder of your selected backup storage.
► Download it from attachment
► Extract it
► Run R1SBAR.exe & follow instructions.
While restoring make sure the backed up files are inside the MYIMEI folder of either Internal Memory or External or it wont work.
If you face any error do tell me!
AGAIN ITS ONLY FOR REDMI 1S
Click to expand...
Click to collapse
Great work :good::good:

None of the usual ROM / kernel flashing result in loss of these partitions .
If someone is able to screw up partitions, chances are that he will remove the partition table too ..
and with that he will not be able to fastboot anymore , to use backups made here.
Don't get me wrong, but its of little use imo.
Sector1369 said:
Code:
dd if=/dev/block/mmcblk0p23 of=/sdcard/mmcblk0p23_modem
dd if=/dev/block/mmcblk0p9 of=/sdcard/mmcblk0p9_DDR
dd if=/dev/block/mmcblk0p12 of=/sdcard/mmcblk0p12_bk1
dd if=/dev/block/mmcblk0p18 of=/sdcard/mmcblk0p18_fsc
ENJOY,
Click to expand...
Click to collapse

kapil.git said:
None of the usual ROM / kernel flashing result in loss of these partitions .
If someone is able to screw up partitions, chances are that he will remove the partition table too ..
and with that he will not be able to fastboot anymore , to use backups made here.
Don't get me wrong, but its of little use imo.
Click to expand...
Click to collapse
U never know when sh*t happens there is no harm in taking the backup. Had personally lost imei on couple of Samsung phone while flashing roms and was able to restore it with the efs backup.

rkkaranrk said:
U never know when sh*t happens there is no harm in taking the backup. Had personally lost imei on couple of Samsung phone while flashing roms and was able to restore it with the efs backup.
Click to expand...
Click to collapse
I mean backing up DRM keys and TA partitions made sense since they are wiped in some bootloader unlocking..
You almost make it sound like, I can restore someone else's IMEI too :silly: ..
I still have my old nokia phones with me of which I can rob their identities ?
Some random Redmi dev can give surprise to actually make an app for this..
Chinese phones have already been a pain in a$$ for Indian Govt due to lack / duplicate of this IMEI modules.

kapil.git said:
I mean backing up DRM keys and TA partitions made sense since they are wiped in some bootloader unlocking..
You almost make it sound like, I can restore someone else's IMEI too :silly: ..
I still have my old nokia phones with me of which I can rob their identities ?
Some random Redmi dev can give surprise to actually make an app for this..
Chinese phones have already been a pain in a$$ for Indian Govt due to lack / duplicate of this IMEI modules.
Click to expand...
Click to collapse
I'm pretty sure u have been using a Sony phone and have limited knowledge so don't jump and compare the phones with the same thing.
As for the imei take help of google and search for z3x/cyclone/nspro/magma what are they used for:silly:

it might come in handy or it might not
nevertheless i'm putting it in safekeeping.
thanks for the work & effort.
:good:

rkkaranrk said:
I'm pretty sure u have been using a Sony phone and have limited knowledge so don't jump and compare the phones with the same thing.
Click to expand...
Click to collapse
Yes you are correct , been using Sony for a while
As for the imei take help of google and search for z3x/cyclone/nspro/magma what are they used for:silly:
Click to expand...
Click to collapse
mmmkaay..

@deadlyindian,
Thanks for providing the automated script to back up imie.
I did go through your post and did as per the instructions mentioned step by step. However, I am unable to proceed after getting the message "Please connect usb cable now" after running R1SBAR. I do have root access(checked from root checker app) and have also enabled USB Debugging. I also inserted cable after getting the message.
Does it take a lot of time(more than 5 mins) to backup imei cause I continued till 5 mins before closing the cmd prompt.
Hope you can help me here.
PS: I am using MIUI v45 global version "JHCCNBH45.0 （V5） " in case if you need.

ADB Drivers & instructions...
fanboy_android said:
@deadlyindian,
Thanks for providing the automated script to back up imie.
I did go through your post and did as per the instructions mentioned step by step. However, I am unable to proceed after getting the message "Please connect usb cable now" after running R1SBAR. I do have root access(checked from root checker app) and have also enabled USB Debugging. I also inserted cable after getting the message.
Does it take a lot of time(more than 5 mins) to backup imei cause I continued till 5 mins before closing the cmd prompt.
Hope you can help me here.
PS: I am using MIUI v45 global version "JHCCNBH45.0 （V5） " in case if you need.
Click to expand...
Click to collapse
Have you installed the ADB drivers for the 1S? ► ADB Drivers ◄
After installing Run R1SBAR.exe & follow the below screens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

deadlyindian said:
Have you installed the ADB drivers for the 1S? ► ADB Drivers ◄
After installing Run R1SBAR.exe & follow the below screens
Click to expand...
Click to collapse
Yes, it seems adb drivers were missing after which I was able to successfully backup my IMIE. Thanks for your help.
Perhaps you could add this link in your earlier post as a pre-requisite so that newcomers won't face this issue. Just a suggestion
Kudos and keep rocking.

fanboy_android said:
Yes, it seems adb drivers were missing after which I was able to successfully backup my IMIE. Thanks for your help.
Perhaps you could add this link in your earlier post as a pre-requisite so that newcomers won't face this issue. Just a suggestion
Kudos and keep rocking.
Click to expand...
Click to collapse
Done!!

Steps to recover IMEI using qcn

How does one change the IMEI?
I've tried this without success:
1. Root your device
2. Download and install QSPT and UltraEdit (HxD would also do).
3. Download an IMEI converter.
4. Get hold of a working qcn (I used my own which I know works in my other P2). Open the file by using Ultraedit/HxD and try to locate the IMEI. In my case it often starts with "08 8A...".
5. Use the IMEI converter and input your true IMEI. Memorize the output.
6. Return to the qcn file. Write it over with the IMEI output you got in step 5.
7. Save the file.
8. In a terminal enter:
su
setprop sys.usb.config rndis,diag,adb
9. Restore the qcn file from step 7 by using QSPT. You click on QPST configuration and go to "ports". If your port isn't already visible go to the device manager, look up the Qualcomm Diag port and add it. For me I believe it's COM9. Now you click on "start clients", then "software download". Tick the "Allow phone/file ESN mismatch", locate your saved qcn file and start restoring it.
10. All done. Reboot!
Apparently some XDA members managed to get their signal back once the modem was deleted so I guess somebody should know.
Other methods I've tried include flashing stock MM and installing OTA until you're on S251 as well as restoring an older full TWRP backup from when your signal used to work. Needless to say, they didn't work.

This procedure worked for me. Lenovo K6 Power with Qualcomm proc.
Successfully I found other users qcn file and wrote my IMEI in it.
Signal is back but diag port disappeared and I can't turn it on again.

WhatsApp me or call me 8436243173

WHERE CAN I GET THIS QNCN ? I'm confused

I had same problem, here are my steps with qcn backup file from working P2. My IMEIs stays right. Sorry for my english and here is my link and read next threads from that forum.
https://forum.xda-developers.com/showpost.php?p=73444145&postcount=70

mL-7 said:
This procedure worked for me. Lenovo K6 Power with Qualcomm proc.
Successfully I found other users qcn file and wrote my IMEI in it.
Signal is back but diag port disappeared and I can't turn it on again.
Click to expand...
Click to collapse
Have K6 power with IMEI turned 0 after fastboot erase modemst1 and 2. Could you please detail the steps to restore IMEI?

Question We need unbrick tool for Redmagic 6/6 pro

Hello everyone, I want to ask if there is any developer who can help us please, we need unbrick tool for Redmagic 6 and 6 pro ASAP because the RM support team doesn't answer our complaints or emails. Please help us

M5tha said:
Hello everyone, I want to ask if there is any developer who can help us please, we need unbrick tool for Redmagic 6 and 6 pro ASAP because the RM support team doesn't answer our complaints or emails. Please help us
Click to expand...
Click to collapse
i've been waiting for my paperweight turn into a phone for a month now, i don't think it will be here any soon....

Nocturne Seigneur said:
i've been waiting for my paperweight turn into a phone for a month now, i don't think it will be here any soon....
Click to expand...
Click to collapse
It’s like Cinderella turning into a pumpkin after midnight. Our devices went from being phones to paperweights overnight.
Someone get our fairy god mothers up in here to bipity bopity this crap back into a working state

Out of curiosity may I ask how did it get to this state? Also I was able to get myself out thru a combination of reflashing boot.img (i was on 4.12), unlocking and relocking bootloader, and factory resetting via recovery mode. Not in that order and each multiple times. Somehow it worked out. Possibly worth a try if you are just waiting anyways with not too much to lose?
I found that a locked bootloader is good at telling whether you didn't quite flash an img right. It kept telling me that things are corrupt and whatnot, and all of a sudden it booted.

So I'm pretty close to getting a working TWRP for this device. I have extracted a basic TWRP.img file and merged it with the boot image for the Red Magic 6. When I flashed it, the logo shows up but nothing happens.
When I have time this weekend, I'll mess around with it some more.
That way we can unbrick it with twrp and not have to worry about waiting for an unbrick tool.

Nocturne Seigneur said:
i've been waiting for my paperweight turn into a phone for a month now, i don't think it will be here any soon....
Click to expand...
Click to collapse
I didn't unlock my bootloader, so I can't do anything to unbric this **** device

M5tha said:
I didn't unlock my bootloader, so I can't do anything to unbric this **** device
Click to expand...
Click to collapse
I’m in the same boat but Nubia is having me send my phone back to them to check out.

Guys the unbrick tool is already in this forum: https://forum.xda-developers.com/t/unbrick-tool-edl-flash-switch-from-cn-to-eu.4284797/
Note if you are rooted before going to EDL mode (9008) you should backup EFS via QFIL QCOM tool as a few people lost their IMEIs - I think it's in EFS Explorer the tool is free just Google it. Then do an EFS backup and save where you can't lose it. Here's a guide just ignore the Lenovo part, but you must go into diag mode Qualcomm 901D which is (try dial code *#7678# first it worked on the Red Magic 5 series, probably puts you in diag mode still) otherwise: adb shell; su; setprop sys.usb.config diag,adb before QFIL will see it: https://forums.easy-firmware.com/showthread.php/29143-How-To-Restore-Backup-QCN-EFS-on-Qualcomm-devices-(Giuide)
You can also back up the partition if you are rooted via adb shell. From memory, enable dev options (click build # under system until it shows up), patch your boot.img with Magisk Manager (should be in the ROM zip file you downloaded, copy to phone), flash back to the phone with fastboot (it will be in Downloads/magisk_patched_xyz.img "xyz" changes names just depends on Magisk) command is just after reboot to fastboot: fastboot flash boot magisk_patched_xyz.img; reboot and you should be rooted. Then from ADB do an ADB shell (it will ask to trust the device connected) adb shell (on PC), su (will ask for root access, grant it), $ dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img and copy that to your PC. That's your persist partition in case it gets messed up you should be able to: $dd if=/sdcard/persist.img of=/dev/block/bootdevice/by-name/persist that assumes you copied persist.img back to your /sdcard/ in internal memory.
If I messed up a step feel free to correct it, this is all from memory no PC in front of me on vacation...

mslezak said:
Guys the unbrick tool is already in this forum: https://forum.xda-developers.com/t/unbrick-tool-edl-flash-switch-from-cn-to-eu.4284797/
Note if you are rooted before going to EDL mode (9008) you should backup EFS via QFIL QCOM tool as a few people lost their IMEIs - I think it's in EFS Explorer the tool is free just Google it. Then do an EFS backup and save where you can't lose it. Here's a guide just ignore the Lenovo part, but you must go into diag mode Qualcomm 901D which is (try dial code *#7678# first it worked on the Red Magic 5 series, probably puts you in diag mode still) otherwise: adb shell; su; setprop sys.usb.config diag,adb before QFIL will see it: https://forums.easy-firmware.com/showthread.php/29143-How-To-Restore-Backup-QCN-EFS-on-Qualcomm-devices-(Giuide)
You can also back up the partition if you are rooted via adb shell. From memory, enable dev options (click build # under system until it shows up), patch your boot.img with Magisk Manager (should be in the ROM zip file you downloaded, copy to phone), flash back to the phone with fastboot (it will be in Downloads/magisk_patched_xyz.img "xyz" changes names just depends on Magisk) command is just after reboot to fastboot: fastboot flash boot magisk_patched_xyz.img; reboot and you should be rooted. Then from ADB do an ADB shell (it will ask to trust the device connected) adb shell (on PC), su (will ask for root access, grant it), $ dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img and copy that to your PC. That's your persist partition in case it gets messed up you should be able to: $dd if=/sdcard/persist.img of=/dev/block/bootdevice/by-name/persist that assumes you copied persist.img back to your /sdcard/ in internal memory.
If I messed up a step feel free to correct it, this is all from memory no PC in front of me on vacation...
Click to expand...
Click to collapse
I locked the bootlooder the screen is black, the only way to connect to the device is on a PC "COM",
I tried this link but and the next steps but it doesn't work, I don't know what to do with the phone and still it doesn't work,
I think I need the firmware RED MAGIC 6 "NX669J_NON EU Common".
PLEASE HELP ME
https://mega.nz/file/ntBSxDKa#h9vUPGoWVyqtyDYWYmSgz8bE1_vNimBMAqTp9csvv-w
2) Make sure all the drivers are installed correctly (Qualcomm, EDL etc...)
3) Open the MiTool application
4) in MiTool, select the folder images
5) Put your phone in EDL mode
6) Once connected, Click flash - the brushing process will start automatically.

Good evening I found a guy who unlocked the phone for me at 150 dollars.
the phone quickly repaired without any problems so the problem is solved.

Marofyxx said:
I locked the bootlooder the screen is black, the only way to connect to the device is on a PC "COM",
I tried this link but and the next steps but it doesn't work, I don't know what to do with the phone and still it doesn't work,
I think I need the firmware RED MAGIC 6 "NX669J_NON EU Common".
PLEASE HELP ME
https://mega.nz/file/ntBSxDKa#h9vUPGoWVyqtyDYWYmSgz8bE1_vNimBMAqTp9csvv-w
2) Make sure all the drivers are installed correctly (Qualcomm, EDL etc...)
3) Open the MiTool application
4) in MiTool, select the folder images
5) Put your phone in EDL mode
6) Once connected, Click flash - the brushing process will start automatically.
Click to expand...
Click to collapse
i tried running it and now the phone is on but no display . who can help me ?
my device is :
Model: NX669J-P
Red magic OS :V4.5
Build number : NX669J_CNCommon_V7.14
Adroid version :11
Hardware version : NX669J_V1AM
I will pay for the software for you if I have to . Hope your help!

Hello,
I can give you the email of the person who repaired my phone but it's expensive 150dollar

manhdoan1601 said:
i tried running it and now the phone is on but no display . who can help me ?
my device is :
Model: NX669J-P
Red magic OS :V4.5
Build number : NX669J_CNCommon_V7.14
Adroid version :11
Hardware version : NX669J_V1AM
I will pay for the software for you if I have to . Hope your help!
Click to expand...
Click to collapse
Hello,
I can give you the email of the person who repaired my phone but it's expensive 150dollar

guide

Marofyxx said:
Hello,
I can give you the email of the person who repaired my phone but it's expensive 150dollar
Click to expand...
Click to collapse
i can pay it 150 usd . give me email

Ok

hey guys..
can u pls share qcn or especially xqcn for NX669J..?