This is my SuperSlim Rom it is based on Stock Rom but I have reduced the System to its basics (near to AOSP) without loosing Camera function.
Base: Stock 32.2.A.0.253 (E6553) Kernel: AndroPlusKernel v31
Features:
-Removed over 300 Apps, only 109 Apps installed
-Full working Camera
-Removed Bootanimation and Charging Sound
-deodexed System
-Layers Compatible
-AdAway and Kernel Adiutor integrated
Additional Infos:
Removed the Bootanimation: Its just the white Sony screen, thats no bootloop.
Layers: Install Layers Manager and minimum one Layer from Playstore.
If you need the Sim-Toolkit, flash this zip
For Calendar Synch you need to flash this file
Bugs: Dialer FC when open numpad. Download Fix for this.
Your bootloader must be unlocked and TWRP recovery must be installed.
I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
Installation:
-Unpack the downloaded ZIP and place the Folder in your Devices TWRP Backup Folder (sdcard/TWRP/Backups/<your-device-id>/)
-reboot your device into TWRP and make a Backup of your current System
-clear data cache/dalvik (factory reset)
-restore the SuperSlim Backup
-restart your device and setup (first start take a few minutes)
Update:
-Unpack the downloaded ZIP and place the Folder in your Devices TWRP Backup Folder (sdcard/TWRP/Backups/<your-device-id>/)
-reboot your device into TWRP and make a Backup of your current System
-restore the System Partition of SuperSlim Backup
-restart your device
Download: SuperSlimRom v1.3 on G-Drive
SuperSlimRom v1.3 on AFH
Kernels for Single SIM:
Stock with DM-Verity, Sony RIC, TWRP and DRM Fix
Zach's Kernel Playground for Z4/Z3+
AndroPlusKernel v31
OM5Z Kernel
Changing/Update the Kernel on a System with Systemless root/xposed requires an immediately flash of betaSU/systemless xposed framework after flashing the new kernel. Otherwise you will get a bootloop.
Dual Sim patch
Kernels for Dual-SIM:
Stock with DM-Verity, Sony RIC, TWRP and DRM Fix(DSDS)
Zach's Kernel Playground for Z4/Z3+(DSDS)
OM5Z Kernel (DSDS)
Changing/Update the Kernel on a System with Systemless root/xposed requires an immediately flash of betaSU/systemless xposed framework after flashing the new kernel. Otherwise you will get a bootloop.
Pictures: SuperSlimRom-v1.2 Layer "Drop UI"
Changelog:
08.07.16 Version 1.0:
-Initial Release
Download v1.0
11.07.16 Version 1.1:
-deodexed System
-Layers Compatible
-Clean up: reduced System size from 2,7GB to 1,5GB
Download v1.1
12.07.16 Version 1.2:
-Rom Base Update to 32.2.A.0.253
-Stock Softkeys Layout
Download v1.2
15.07.16 Version 1.3:
-final clean up of the Rom
-Reintegration of Kernel Adiutor
-Fixed Sony Stock issue with data roaming
-last release until base gets an update
Removed "stock" from OP, Thread Title and Rom name, some User seem to think that this is full Stock Rom
Download v1.3 on G-Drive
Download v1.3 on AFH
Trilliard said:
This is my SuperSlim-Stock Rom which i made because i dont think Sony will fix the AOSP Camera Driver Bug in the near future. The plan was to make the Stock Rom as near as possible to AOSP. This Rom is as Slim as possible without loosing main Camera function. Everything else which is not really necessary for using the Device or Android is removed, its probably the hardest debloading what is possible. I removed over 300 Apps, this took me more than two Weeks for testing. Now after addition of one Week using the Final Rom without issues i give it to you.
I also removed the Bootanimation, its now just the white Sony screen so dont wonder thats no bootloop. I forgot that i changed the Softkeys layout too and my layout is in this Backup. If you want to change it just use one of the Apps from playstore or one of the xposed modules.
I AM NOT RESPONSIBLE FOR ANY DAMAGES THAT MAY CAUSE YOUR DEVICE
Base:
Rom: Stock 32.2.A.0.224
Kernel: AndroPlusKernel v31 (please help keeping this kernel alive)
Bugs: No known Bugs
Your bootloader must be unlocked and TWRP recovery must be installed.
Installation:
-Unpack the downloaded ZIP and place the Folder in your Devices TWRP Backup Folder (sdcard/TWRP/Backups/<your-device-id>/)
-reboot your device into TWRP and make a Backup of your current System
-clear data cache/dalvik (factory reset)
-restore the superslim Backup
-restart your device and setup
Download: SuperSlim-Stock224-v1.0
You can use every Kernel you want, if it´s for the Stock Rom.
I hope you have fun using the Rom.
Regards
Click to expand...
Click to collapse
Mod edit: Please don;t quote the whole OP. If you feel the need to then please wrap it in hide tags like I have done.
Does it work with dual sim version???
njaya95 said:
Does it work with dual sim version???
Click to expand...
Click to collapse
v31 kernel have sd issues with e6533
death_note7 said:
v31 kernel have sd issues with e6533
Click to expand...
Click to collapse
Yeah I know, I flashed it and checked.
njaya95 said:
Does it work with dual sim version???
Click to expand...
Click to collapse
You could try this Convert Single Sim Rom to Dual Sim for Z5
Many thanks for your work on this. I'll be flashing either later today or tomorrow.
The AOSP ROM you posted is good but I'm already missing having a camera that works.
Excuse me, this rom is compatible with the E6533 version?
lilloscar said:
Excuse me, this rom is compatible with the E6533 version?
Click to expand...
Click to collapse
Please read the post which is two posts over your question. http://forum.xda-developers.com/showpost.php?p=67654167&postcount=6
Can you provide list of what is removed ? I already debloted mine but i want to check with you.
Thanks
is this rom easier to run than the stock one? stupid question, but i may want to try it, but do want to use it as a daily driver, so is this rom daily driver compatible ? And could you provide some screenshots?
GryTEcHoG said:
Can you provide list of what is removed ? I already debloted mine but i want to check with you.
Thanks
Click to expand...
Click to collapse
Not really, this list would be a whole page long and i didnt made one xD If you used the debload script, you have just deleted half of what you could.
Stock System has nearly 500 Apps, the debload script removes about 180 of them, my System has only 128 Apps installed.
Trilliard said:
Not really, this list would be a whole page long and i didnt made one xD If you used the debload script, you have just deleted half of what you could.
Stock System has nearly 500 Apps, the debload script removes about 180 of them, my System has only 150 Apps installed.
Click to expand...
Click to collapse
ok, i'll download yours and see myself. Are you sure there wont be any Force close with any of Sony or google apps if we intend to use from play store ?
xswish said:
is this rom easier to run than the stock one? stupid question, but i may want to try it, but do want to use it as a daily driver, so is this rom daily driver compatible ? And could you provide some screenshots?
Click to expand...
Click to collapse
What do you mean with "easier to run"? I use it as a daily driver. Screenshoots are not really necessary i think because its stock Rom and only thing which would be different with Stock Screenshoots is that i removed the stock sony launcher, the sony mini launcher is now the default one. But you can use every Launcher you want even reinstall the stock launcher from playstore. If i would make some screenshoots you would only see my Novalauncher
GryTEcHoG said:
ok, i'll download yours and see myself. Are you sure there wont be any Force close with any of Sony or google apps if we intend to use from play store ?
Click to expand...
Click to collapse
How can i be sure? The Rom is made for having a System without Sony Apps. The Stock Launcher and such things should work, but the special Sony Apps like Navigon for Xperia could have problems detecting that this is a Xperia device.
Trilliard said:
How can i be sure? The Rom is made for having a System without Sony Apps. The Stock Launcher and such things should work, but the special Sony Apps like Navigon for Xperia could have problems detecting that this is a Xperia device.
Click to expand...
Click to collapse
Ok then as I use some sony apps so trying your rom could be an issue. Will manually check files from your zip and see if there is anything I can get rid of. Thanks anyway
Trilliard said:
What do you mean with "easier to run"? I use it as a daily driver. Screenshoots are not really necessary i think because its stock Rom and only thing which would be different with Stock Screenshoots is that i removed the stock sony launcher, the sony mini launcher is now the default one. But you can use every Launcher you want even reinstall the stock launcher from playstore. If i would make some screenshoots you would only see my Novalauncher
Click to expand...
Click to collapse
hmm ok i ca, thanks for information would you say the rom is stable as a daily driver? and do you think the Zhach playground kernel will work? http://forum.xda-developers.com/xpe...el-zachs-kernel-playground-z4-z3-wip-t3404587
xswish said:
hmm ok i ca, thanks for information would you say the rom is stable as a daily driver? and do you think the Zhach playground kernel will work? http://forum.xda-developers.com/xpe...el-zachs-kernel-playground-z4-z3-wip-t3404587
Click to expand...
Click to collapse
Yes and Yes.
super great work with the rom! Best debloating ive seen! works like a charm as well (Y)
Trilliard said:
11.07.16-- testing phase started v1.1 (deodexed, layers compatible, 20% smaller system)
Click to expand...
Click to collapse
Wow.. That's great to know and waiting for V1.1. Thanks for the work and sharing. :good:
Related
Hi, latest Sony 14.4.A.0.108 rom for you!
Features is inside screenshoots. Rom is rooted, have superuser, su, busybox...etc, just simple install propertly and enjoy rom! Bye!
Download old stable rom (update 5 is required after installing this rom!):
- https://mega.co.nz/#!dconlALD!EmOWK0lASSlyuTEkyFQBP8jRGpD3tbKWutD4JdHoJfs
Download new stable rom - final rom (03.jul.2015) (do not install any update with this rom!!!):
- https://mega.co.nz/#!AcxllSZa!dO-qrrgWuXeDrU4p_jmpkawZwz5fI83lWiHfD-KrjWQ MD5: 6a5e5de79ad7120db63fc9eb57974450
This final rom is one which I am runing daily, I have removed some boatwares but not all, removed only some which iritating me. So if you need some apks which is missing, just download from here -> https://github.com/munjeni/D5503_14.4.A.0.108/tree/master/system and add to the zip byself! This rom have some optimisations and fixes, dual recovery, cwm munjeni and twrp, to enter cwm hold volume down when blue light start blinking, or hold volume up for twrp when blu start blinking. I recomend linheart+row and my favorite theme aka black theme munjeni which is included only in final rom aka this one. This rom contain kernel from 157 with kernel modules and firmwares from 157... etc, in short my favorite rom dumped directly from my phone using romgen tool, so its tested and definitely stable, just install it right and carefully and enjoy!
* If you have root problems or problems remounting system rw, install this http://forum.xda-developers.com/showpost.php?p=61696951&postcount=531
* If your choice was "debloat rom" trought aroma installer, I have marked google contact & calendar sync in removal list as bloatware, but if you realy want to debloat your rom but kiping google contact & calendar sync you must install folowing zip package -> http://forum.xda-developers.com/showpost.php?p=61894795&postcount=573
How to install:
- first of all you must have your phone updated oficialy to the bootloader, baseband... etc and it must be from 108 rom (your choice how you can do it, but thats needed!) before you gona install our rom! You no need to be rooted since rom is for booth locked and unlocked bootloader!
- wipe data factory reset
- format system partition
- install rom
- install update.1 -> (this fix portrait retouch and give you China Photo editor) NOT REQUIRED ANYMORE !
- install update.2 -> https://mega.co.nz/#!NI4UkAgD!XPGU4WhDsfRXquzaL1wmQDaees-PrtF8SBpIOZgdn_Y (this revert dialog and toast style to stock one ;; fix for timeshift video) NOT REQUIRED ANYMORE !
- install update.3 -> https://mega.co.nz/#!lAZSUISa!09ca_GvuDHh8r9-5M3aAhc3TiDOePj26n79aa7VkTds (unhiden daydream option in settings menu) NOT REQUIRED ANYMORE
- install update.4 -> https://mega.co.nz/#!4JJFTYjZ!IjQsoCdJhSFBZFs_hyQrEHudBkaCZZfiyhG4-wHm7sc (usb serial support and ftdi sio ; new task killer) NOT REQUIRED ANYMORE
- install update.5 -> https://mega.co.nz/#!1FoUkLZB!SEpBPmiV7GC6D0CeXdej-neqwOsfMelrFTxY5teKFp8 (ntfs support) INSTALL ONLY IF YOU HAVE old stable rom, do not use with final rom!!!
- do not replace default busybox which comming with this rom since you will broke root!
For best experience I have compiled Lionheart cpu governor, you can use them in combination with row iosched to get very smooth ui and very good baterery life for daily usage! I have runing rom 13 hours + 1 hour with phone usage and have almost 88 percent batery power remain
4k is not working and allso I not going to get them working!(I have removed 4k from camera widget). I sugest you to not use any external camera mod since our one is totaly stock based and I have not replaced anything related to stock camera, every camera part is carefully patched, so if you want any camera mod than do not go here to report something which probably will not work after your replace or you get battery drain fast after replace! Allso if you have installed something which not comming from our rom than allso please do not report anything! Everything is tested and everything working very good!
If somebody have problems installing rom (error 7 during installation):
- Remove first 2 lines (ASERT) from updater-script than try again
Hoorraaayy, you are back.
Thanks for the update man, will download and try ASAP,
Also I was looking for an update for multiboot, that would be amazing.
Thanks for your great work, and looking forward to seeing more of you
Probably not since my microphone is broken and probably I must get new model soon (z3 mini)...soon. In any way I am sharing the best rom to all :laugh:
Thanks for sharing this ROM, looks very promising!! Is it based on the brand new Sony firmware 14.4.A.0.108 from August, or on the one that is available since June?
With best regards, maris
Yes, D5503_14.4.A.0.108_latest one from august
Nice to have you back, keep cool
Hello, welcome back! Have you made a new kernel? Or do you just add the new Governor?)
John.D.. said:
Hello, welcome back! Have you made a new kernel? Or do you just add the new Governor?)
Click to expand...
Click to collapse
Just created Lionheart governor module which is insmoded on boot time trought install-recovery.sh!
munjeni said:
Just created Lionheart governor module which is insmoded on boot time trought install-recovery.sh!
Click to expand...
Click to collapse
Brilliant!. Is there support init.d ?
I'm still using your older rom, because I didn't want to loose the Led and Privacy Guard functionality. Now I'm finally able to update! :victory:
Thank you very much Munjeni!
what are the differences with the old .108?
John.D.. said:
Brilliant!. Is there support init.d ?
Click to expand...
Click to collapse
Yes, its allready there!
phantomEVO said:
what are the differences with the old .108?
Click to expand...
Click to collapse
You can see notification trought Sony PC Companion software about 108 update, inside notification window you can see changelog about new update (just open SPCC before you install latest rom)!
Maybe silly question but anyway, twrp recovery is ok right? Or flash through cwm only?
You can try
I followed all steps for installation and every time it fails.
vriz27 said:
Maybe silly question but anyway, twrp recovery is ok right? Or flash through cwm only?
Click to expand...
Click to collapse
Flashed via twrp and worked flawlessly.
@munjeni
Is it possible to change the loading animation to stock? I noticed that in this rom it looks like this.
any kernel tweaks in this rom?
einfachgaer said:
Is it possible to change the loading animation to stock? I noticed that in this rom it looks like this.
Click to expand...
Click to collapse
Yes, simple open rom zip and replace framework-res.apk with this one https://raw.githubusercontent.com/m...f725b2b6f0/system/framework/framework-res.apk than reflash rom without wiping anything
OyyO said:
any kernel tweaks in this rom?
Click to expand...
Click to collapse
No need since stock rom is performing very fast and I think thats not need
**************************************************
[ROM] 6045Y-DCZ
current version 2.2 (2016-08-09)
STOCK, STABLE, FAST, ROOT
**************************************************
FOR NOW IT IS ONLY FOR SINGLE SIM DEVICES!! DUAL SIM NOT WORKING
-it is not exactly a build. Its more a mod.
-based on latest Alcatel IDO 3 5.5 6045Y MMB29M EUROPE UPDATE
-including ROOT (latest supersu 2.76)
-removed all unnecessary apps from Alcatel. there is only the necessary basic to run the phone. All other things you can download by yourself.
-Due to source is the avaliable set of languages shrinken to English, German, Slovak and Czech. But More Locale 2 app (included) will do the trick for you on most apps.
GUIDE:
-Its always better to flash this upon a stock firmware. You can try to flash it upon custm roms like CM AOKP etc, but since i havent tested it, i dont know if it will 100% work
-download firmware and also the MD5 checksum and copy both files to your phone.
-go to TWRP recovery (please make sure you use the @Unjustified Dev version from here
-make backup of your current ROM
-here you can grab a bat file to make backup of your curent MODEM, or download your MODEM in a zip file. Don´t forget to thank @famewolf for the time he spends to gather the modems.
-If you hav ebackup of oyur curent modem, just open my ROM zip in a ZIP app (i use 7zip). Replace the non-hlos.bin with your non-hlos.bin (modem) file.
-copy the ROM (and if you choose the modem zip file from @famewolf )
-wipe chache/dalvik/system/data
-format data (just to be sure. Format data is something diferent than wipe data)
-install ROM (make sure you have MD5 check enabled and it gives no error)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk
ISSUES:
-on my 6045Y i have no issues so please report
changelog in 2.2 build (2016-08-09)
-parallax background on stock launcher (looks great)
-translucent appdrawer background
-cleared updater-script of useless lines
changelog in 2.1 build (2016-08-08)
-build from latest 6045Y 010 06 update (6045Y MMB29M EUROPE UPDATE)
-no need to do some silly unmount and mount crap, because i know how to write the updater-script
-Root (systemless) included, GAPPS included (as this is just a moded stock ROM)
-Debloated 6.0.1 version..lockscreen is working well for my on 6045Y
-Background wallpaper from Vikas Kanwal (no stealing from web)
-Included 6045Y modem, so if you are on non 6045Y version see above to get your corespondent modem zip fle or image file before you start flashing.
-Security patch for 6.0.1 (from 2016-1-7)
-Double tap on lock screen to sleep
-Launcher 5x6 and dock 5x grid (instead of 4x5)
-lcd density set to 430
-USB debuging enabled from first boot
-Color temperature setting
-Technicolor enhanced colors
-Call recorder - when you are in a call you can tap on the three dots on the right and record the call
-Multi window enabled (under sttings/developer option)
-Glove mode (higher sensitivity of touchscreen)
-Three fingers swipe to make screenshot
CREDITS:
@Unjustified Dev , @famewolf , @The Marionette, without them there will be no IDOL 3 5.5 develpment, so pelase give them a thnax!
And of course i am not responsible for any damage you do by flashing this on your device!
DallasCZ said:
**************************************************
[ROM] 6045-i806-DCZ
current version 1.0
STOCK, STABLE, FAST, ROOT
**************************************************
-it is not exactly a build. Its more a mod.
-based on latest TCL i806 (IDOL3) firmware (JSU_I806-2[ABC]LCCN7_7TMBRCB3)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).
-Antutu player will love the 37K ratings (all cores set to performance Governors)
-including ROOT (latest supersu 2.52)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL. there is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is only 600 MB on size.
-Due to source is the avaliable set of languages shrinken to English and Chineese. But More Locale 2 app (you can download form google play) will do the trick for you on most apps.
GUIDE:
-go to TWRP recovery
-wipe chache/dalvik/system/data
-install ROM
-install GAPPS (i use open gapps 5.0 nano)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk (size aprox 600 MB)
ISSUES:
I dont know of any, you tell me.
FUTURE PLANS:
-merge another languages from framework res, settings, systemUI apks . As i am not a DEV i will repack the apks adding these languages it should work with more locale 2 then. I cannot add the language support to the rom itself.
-replace the i806 launcher with one from 6045Y (will do need more tests because of lags of the 6045Y launcher).
-add some minor build.prop tweaks
CREDITS:
BIG thnax to @franq36 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Click to expand...
Click to collapse
Nice work! Does your version allow wifi to be enabled while in airplane mode? Are you changing the model to something unique like x806 to prevent updates from trying to be downloaded/installed that could affect partitions beyond system/boot? Did you remove the system update checker? Have you modified or eliminated the default updater-script in the stock i806 rom which clobbers several partitions beyond system and boot?
famewolf said:
Nice work! Does your version allow wifi to be enabled while in airplane mode? Are you changing the model to something unique like x806 to prevent updates from trying to be downloaded/installed that could affect partitions beyond system/boot? Did you remove the system update checker? Have you modified or eliminated the default updater-script in the stock i806 rom which clobbers several partitions beyond system and boot?
Click to expand...
Click to collapse
-yes wifi can be turned on while in airplane mode
-i deleted update checker app, so there are no updates
-yes i deleted all entries that were messing around with radio etc.. So now this script only format and copy system, busybox, root, kernel thats all. So it should be also suitable for 6045I version. I can enable the double sim stuff in build.prop so this should work also for 6045K version.
DallasCZ said:
-yes wifi can be turned on while in airplane mode
-i deleted update checker app, so there are no updates
-yes i deleted all entries that were messing around with radio etc.. So now this script only format and copy system, busybox, root, kernel thats all. So it should be also suitable for 6045I version. I can enable the double sim stuff in build.prop so this should work also for 6045K version.
Click to expand...
Click to collapse
Sounds like you have all the bases covered! What a shame we can't get multirom to work on our device YET....it would allow us to use our external sd to swap between multiple roms and I could have cm12.1, yours and whatever new one I'm testing all going at the same time. Multirom also has it's own custom build of twrp that supports the roms.
i know i have used MULTIROM on my older devices...
DallasCZ said:
i know i have used MULTIROM on my older devices...
Click to expand...
Click to collapse
You may want to look back to your source and see if they do an unmount of /persist at the end. You have left in the code which format's it and extracts the wifi drivers then symlinks them but I didn't see an unmount so it may have gotten accidentally deleted. It may be unnecessary but normally for every mount you have an unmount as it can leave partitions mounted in twrp that could cause issues if the user installs packages after the current one.
Hmm I guess I should also confirm for the 6045i users that you are using the "group 2" kernel? If not, 6045i users will need to flash the group 2 kernel right after flashing the rom before they reboot..not a big deal but if necessary a link to it in post #1 might help. Looking forward to trying this one since the i806 rom had such better performance for the idol3 than the default roms.
famewolf said:
You may want to look back to your source and see if they do an unmount of /persist at the end. You have left in the code which format's it and extracts the wifi drivers then symlinks them but I didn't see an unmount so it may have gotten accidentally deleted. It may be unnecessary but normally for every mount you have an unmount as it can leave partitions mounted in twrp that could cause issues if the user installs packages after the current one.
Click to expand...
Click to collapse
My fault i wrote twice unmount system.... hmm thats when you make such things at 2:00 AM
thanx bro.
DallasCZ said:
**************************************************
[ROM] 6045-i806-DCZ
current version 1.0
STOCK, STABLE, FAST, ROOT
**************************************************
-it is not exactly a build. Its more a mod.
-based on latest TCL i806 (IDOL3) firmware (JSU_I806-2[ABC]LCCN7_7TMBRCB3)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).
-Antutu player will love the 37K ratings (all cores set to performance Governors)
-including ROOT (latest supersu 2.52)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL. there is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is only 600 MB on size.
-Due to source is the avaliable set of languages shrinken to English and Chineese. But More Locale 2 app (you can download form google play) will do the trick for you on most apps.
GUIDE:
-go to TWRP recovery
-wipe chache/dalvik/system/data
-install ROM
-install GAPPS (i use open gapps 5.0 nano)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk (size aprox 600 MB)
ISSUES:
I dont know of any, you tell me.
FUTURE PLANS:
-merge another languages from framework res, settings, systemUI apks . As i am not a DEV i will repack the apks adding these languages it should work with more locale 2 then. I cannot add the language support to the rom itself.
-replace the i806 launcher with one from 6045Y (will do need more tests because of lags of the 6045Y launcher).
-add some minor build.prop tweaks
CREDITS:
BIG thnax to @franq36 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Click to expand...
Click to collapse
I participate in the development but the creator of the kernel is @acura2201 should also include in the credits, also a link to the original kernel thread in HTCMania
thx,good job
Does this ROM support all the variants?
Sent from my 6045X using XDA Forums Pro.
The Marionette said:
Does this ROM support all the variants?
Sent from my 6045X using XDA Forums Pro.
Click to expand...
Click to collapse
As it does not rewrites original recovery neither radio files it should be good to all variants, but I have not tested (only on my 6045Y).
the second thing is the OC kernel from HTCMANIA.com if it will be working on 6045I,6045O nad 6045K variants.
If someone with dual sim (K version) would try it and has no dual sim options there have to be a slightly build.prop modification. Just change line "persist.radio.multisim.config=single" to "persist.radio.multisim.config=dsds".
someone should try...If he made a full TWRP backup, there is nothing to worry about (i think)
famewolf said:
Hmm I guess I should also confirm for the 6045i users that you are using the "group 2" kernel? If not, 6045i users will need to flash the group 2 kernel right after flashing the rom before they reboot..not a big deal but if necessary a link to it in post #1 might help. Looking forward to trying this one since the i806 rom had such better performance for the idol3 than the default roms.
Click to expand...
Click to collapse
You re right as always i mentioned it on 1st post.
DallasCZ said:
Suprisingly no. I used the group1 OC kernel and i am running on it since yesterday and no hicups,lags or reboots.
Click to expand...
Click to collapse
*removed half asleep post since you had already added link to post #1*
I'm surprised the chinese rom had higher antutu scores than cyanogenmod but I'm looking forward to having a rom that flips "upside down" properly.
Edit: Disregard what I said below, I just looked at the page again without it being translated and found the link, I think. Wow, translators really make a mess of a page. Is this the correct file/img...."Nuevoboot_Alcatel_V1.img"?
I'd like to try this but the link to HTC Mania translates horribly, it's a absolute mess. I cannot find the download link for the Group 2 OC Kernel (6045i) anywhere on that page. Can direct links be posted?
Hmm, so I have cm12.1 11/23 running, and its rebooting alot more than it was yesterday Lol. I am running the group 1 oc. Is that the right one? I think it is, so hmm. Is it worth switching back to stock?
anyone with other model than 6045Y should download the Nuevoboot_Alcatel_V1.img as I understood.
Odesláno z mého 6045Y pomocí Tapatalk
DallasCZ said:
anyone with other model than 6045Y should download the Nuevoboot_Alcatel_V1.img as I understood.
Odesláno z mého 6045Y pomoc�* Tapatalk
Click to expand...
Click to collapse
Well, I have tried that one as well, and it doesn't boot. So I guess its for stock ROM? Haha.
Disregard previous information, apparently the kernel in the thread changed somewhat since the last time I downloaded it. Testing again, boots up with the group 2, will report back.
capeorigins said:
Hmm, so I have cm12.1 11/23 running, and its rebooting alot more than it was yesterday Lol. I am running the group 1 oc. Is that the right one? I think it is, so hmm. Is it worth switching back to stock?
Click to expand...
Click to collapse
You should talk about cm in the cm thread..thats what it's for. Group 1 and group 2 is only for "stock" roms. the i806 falls under "stock rom". Roms like cyanogenmod should be running the CM kernel on that page. It's part of the name and not either of the groups.
---------- Post added at 09:39 PM ---------- Previous post was at 09:34 PM ----------
@DallasCZ
What min/max/governor are you choosing for big & little in KA?
Ok... so:
6045i
- Full Wipe
- Installed without kernel, then hit reboot
- Rebooted straight to TWRP, said OS not installed. Installed over it, rebooted.
- Booted up, went through settings, then froze when Supersu free dialog box popped up
- Installed Nuevoboot_Alcatel_V1, and open_gapps-arm64-5.0-micro-20151124
- Booted up fine, no play service issues of any kind
- Ran AnTuTu 64-bit with big/little on performance (1651 and 1113), score 33,625
Can't fathom why the 6045Y would score almost 3,500 more on AnTuTu. Made sure there was no thermal throttling by placing phone in front of air conditioner.
Edit: Seems the 6045Y can throttle the little up to 1601, whereas my 6045i maxes at 1113? I'd assume that is where the extra 3,500 in AnTuTu is coming from. Odd, in the CM OC kernel I was able to 1601 on the little..
Edit 2: Set the GPU to max clocks and performance governor, score 35,868. If little clocks would hit 1601 instead of 1113, I'm betting it would pass 37,000.
Final Thoughts: I've had zero issues with performance in any capacity, and the MOTO Camera for v2 Lollipop works great. I think we've got a winner here. Not a big fan of the news thing when you swipe to the left though, hopefully an easy way to get rid of that... and apparently its pretty easy, just press and hold on homescreen, then hit the toggle on the mini version of the news screen, gone!
xStealth said:
Ok... so:
6045i
- Full Wipe
- Installed without kernel, then hit reboot
- Rebooted straight to TWRP, said OS not installed. Installed over it, rebooted.
- Booted up, went through settings, then froze when Supersu free dialog box popped up
- Installed Nuevoboot_Alcatel_V1, and open_gapps-arm64-5.0-micro-20151124
- Booted up fine, no play service issues of any kind
- Ran AnTuTu 64-bit with big/little on performance (1651 and 1113), score 33,625
Can't fathom why the 6045Y would score almost 3,500 more on AnTuTu. Made sure there was no thermal throttling by placing phone in front of air conditioner.
Edit: Seems the 6045Y can throttle the little up to 1601, whereas my 6045i maxes at 1113? I'd assume that is where the extra 3,500 in AnTuTu is coming from. Odd, in the CM OC kernel I was able to 1601 on the little..
Edit 2: Set the GPU to max clocks and performance governor, score 35,868. If little clocks would hit 1601 instead of 1113, I'm betting it would pass 37,000.
Final Thoughts: I've had zero issues with performance in any capacity, and the MOTO Camera for v2 Lollipop works great. I think we've got a winner here. Not a big fan of the news thing when you swipe to the left though, hopefully an easy way to get rid of that... and apparently its pretty easy, just press and hold on homescreen, then hit the toggle on the mini version of the news screen, gone!
Click to expand...
Click to collapse
Most folks could choose 1601 but their phone was rarely actually at that speed...people experiencing reboots should check their cpu temp in KA...in every case I encountered a reboot checking it right after boot showed it was still quite high and more than likely the cause of the reboot. You should however be able to set it to 1300 without issues.
I wouldn't use performance or interactive as they had all 4 cores going way to much of the time allowing temps to rise.....try "wheatley".
SuperTouchWiz
Android Lollipop 5.0.1
Fast | Light | Stable
- Changelog
- Downloads :
ROM : AndroidFileHost - GoogleDrive
QK1 Bootloader : Bootloader
QK1 Modem : Modem
Samsung Apps and Cloud : SuperSamsungApps
- Root :
SuperTouchWiz has no root include to let you flash what root method you want. So flash SuperSU, Magisk or.. nothing. I recommend Magisk.
- How to flash bootloader and modem :
SuperTouchWiz has a stock kernel, you need to flash the correct bootloader and modem or you will don't have WiFi and Mobile data.
Download Odin here
XXUHQK1_BOOTLOADER.tar in BL
XXUHQK1_COMBINED.tar in CP
If you don't wan't to do this, flash a custom kernel.
- Flashable UI : Black | Stock
- Instructions :
Flash TWRP
Boot to recovery (Power+Vol.Up+Home)
Wipe > Advanced Wipe > Dalvik/ART Cache, System, Data and Cache.
Now choose SuperTouchWiz-vX.zip.
Wait until it install the Rom.
Reboot
i9515 users :
- Updated the baseband and bootloader to PK4 DOWNLOAD
- Flash the rom
- Flash this kernel : DOWNLOAD
i9515L Kernel
DOWNLOAD
i337m users :
Instructions here
Others apps
Smart Manager + Widgets | Black Smart Manager | S Memo | S Note
Add Flashlight, UPSM, Toolbox and Sidekey toggles
Flash SuperToggleMod : DOWNLOAD
Important : Flash this AFTER the first boot.
Flashable Adblock host
For users who want to block ads but don't want root : DOWNLOAD
This rom will automatically install hpa1 modem??
H3M3L said:
This rom will automatically install hpa1 modem??
Click to expand...
Click to collapse
No, you'll need to flash the modem but the modem is optional
Hi lenny ! I am very interesting in the way you proceed to achieve your custom rom, because i have the same project : what did you use ?
Envoyé de mon GT-I9505 en utilisant Tapatalk
good job, Xposed framework works in this rom ?
darksanders said:
good job, Xposed framework works in this rom ?
Click to expand...
Click to collapse
Yes, use this one : xposed-v75-sdk21-arm-arter97-snapdragon.zip
not exactly "untouched"
S7 MM System UI
For who prefer Marshmallow I made a reproduction of S7 MM UI
I also remove the QuickConnect button, noboby want it.
DOWNLOAD
Instructions :
Just flash it with recovery.
the next time creat SystemUI.apk In Dark like Settings menu, toogles,messages and keyboard ,thanks bro for your work
Why isn't my GPS working in this ROM ?
Amendra24 said:
Why isn't my GPS working in this ROM ?
Click to expand...
Click to collapse
I also made my own Deodexed Stock rom. . . and GPS is also not working, it's a firmware issue with deodexing maybe, when i used odexed it worked fine.
oscar80silva said:
the next time creat SystemUI.apk In Dark like Settings menu, toogles,messages and keyboard ,thanks bro for your work
Click to expand...
Click to collapse
Agreed my perfect version of TW would be dark, all bloatware removed and odexed.
I've moved away from MM and back to LL but i do miss the darkness lol.
I don't know how hard it would be to create such a ROM, I'm a user, a tinkerer and definitely not a ROM developer ?
A question if i may...
What about "build.prop"? Has it been modified?
I'd need original build.prop file to be able install and run specific apps, which won't work on custom ROMS.
Thanks!
.A.
Corduroysack said:
Agreed my perfect version of TW would be dark, all bloatware removed and odexed.
I've moved away from MM and back to LL but i do miss the darkness lol.
I don't know how hard it would be to create such a ROM, I'm a user, a tinkerer and definitely not a ROM developer
Click to expand...
Click to collapse
If you're interested, I've made a stock odexed, rooted, debloat (562Mb) with custom kernel and S7 UI.
For the full dark ui I don't know how to make it for now, I develop these rom alone so don't be in a hurry
ablabla said:
A question if i may...
What about "build.prop"? Has it been modified?
I'd need original build.prop file to be able install and run specific apps, which won't work on custom ROMS.
Thanks!
.A.
Click to expand...
Click to collapse
Yes I've slightly modified it..
Lenny Bard said:
If you're interested, I've made a stock odexed, rooted, debloat (562Mb) with custom kernel and S7 UI.
For the full dark ui I don't know how to make it for now, I develop these rom alone so don't be in a hurry
Yes I've slightly modified it..
Click to expand...
Click to collapse
yes very interested @Lenny Bard
562mb ohhh boy. Let me have it. Rom back up before i go in other country.
Sent from my SM-A710F using Tapatalk
Lenny Bard said:
If you're interested, I've made a stock odexed, rooted, debloat (562Mb) with custom kernel and S7 UI.
For the full dark ui I don't know how to make it for now, I develop these rom alone so don't be in a hurry
Yes I've slightly modified it..
Click to expand...
Click to collapse
What are you waiting for dude?
Enviado desde mi GT-I9505G mediante Tapatalk
Since coming lollipop I'm waiting
Pleeeeeeseeeee
I have a slow internet connection so I upload the rom now, it will be ready tomorrow.
I see there is a new firmware available, I'll work on it.. tomorrow too.
HybridRom Concept EditioN
New Z1:
I decided to buy a secondhand Z1, so now I can continue developing. As school is starting again soon I will not be able to do a lot. I will do what I can.
Description:
We all got used to the idea that most stable ROM is a Stock one.
This ROM will prove you otherwise.
This ROM was previously only available for the Xperia ZU, but thanks to @Doom Slayer's new development group it will start spreading to other Xperia devices. Some apps might not be the newest, but they are very stable. Our main priority is making the ROM compatible with other Xperia devices before updating every app. Today we have decided to release the first open beta for the Xperia Z1. There is only one problem we know of so far, which is an issue regarding the rear-facing camera. Sometimes the camera saves corrupt photo's. Video recording, front-facing camera, Snapchat, taking WhatsApp photo's etc. work just fine.
Feel free report bugs and help us squatting them .
Main Futures:
Very fast and responsive ROM based on Z3 aosp concept and GPE libs with amazing battery life and memory management.
Perfect combination of Sony and Google apps.
No bloatware, no adds.
Only 400 megabytes.
Optional modifications.
Installation options:
Feel free to install the rom the way you want to:
Are you an advanced user who'd like to experiment with their phone?
Feel free to install our mod for theme support and kernel for advanced futures.
Change log:
Kernel 24-aug
128kHz and 24bit audio
Fixed fauxsound
V2.0.1:
Fixed zip file
V2:
Updated Sony and Google apps
Removed:Browser,Google Now,Gmail,Viper,Video(support implemented in Album) and some other bloatware.
Fixed Sony Sound Enhancements
Fixed Write To SD Card (I hope so)
Added new weather widget
Bugs:
Flashlight (probably camera related)
Autorotation
Some people might have 5ghz wifi connection problem
Wifi may disconnect during screen off no matter the settings. (This is android problem, not my rom)
The rear-facing camera sometimes saves corrupt photo's
Installation Instruction:
Make sure that your Bootloader is Unlocked.
Boot in TWRP.
Wipe system,data,and both caches.
Flash the ROM.
Reboot device.
Prepare to be amazed.
Mods and fixes, but don't install these kernels on your Z1!
Credits:
@Jozinek for Z3 AOSP Concept
@ATMOSF3AR Z Ultra PSD
XDA:DevDB Information
HybridRom Concept EditioN, ROM for the Sony Xperia Z1
Contributors
aquaboy11, Doom Slayer
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: Z3 AOSP Concept, Stock and GPE
Version Information
Status: Beta
Current Beta Version: 2.0.1
Beta Release Date: 2016-07-26
Created 2016-07-26
Last Updated 2016-08-24
Reserved
This post can be removed as I jus figured out how to reserve posts using DevDB .
Since ZU and Z1 have similar hardware, I can provide some support as well. @aquaboy11, thank for opening a thread, let's make a cabdy out of that ROM.
A person who will find a way to fix camera will become a member of out dev team.
Also, if you have experience with kernels, then you can try to make a defconfig for my own kernel, which will allow me to bring a kernel as well, kernel with fauxsound, dt2w and etc.
I don't have Z1 on my own unfortunately.
Doom Slayer said:
Since ZU and Z1 have similar hardware, I can provide some support as well. @aquaboy11, thank for opening a thread, let's make a cabdy out of that ROM.
A person who will find a way to fix camera will become a member of out dev team.
Also, if you have experience with kernels, then you can try to make a defconfig for my own kernel, which will allow me to bring a kernel as well, kernel with fauxsound, dt2w and etc.
I don't have Z1 on my own unfortunately.
Click to expand...
Click to collapse
Glad to see that new devs are arriving to our device. But for the dt2w feature on kernel, it's not possible for z1 because of a deepsleep's bug.(i don't think it's possible to correct it).
Nice. I hope it comes to our Z1 Compact
FotoMichi said:
Nice. I hope it comes to our Z1 Compact
Click to expand...
Click to collapse
It's a next device in the to-do list
FotoMichi said:
Nice. I hope it comes to our Z1 Compact
Click to expand...
Click to collapse
I might give it a shot , I'll see what I can do!
Hello, this ROM for which the Xperia version is compatible?
For all codename "honami": Xperia Z1 C6902, C6903, C6906, C6943 ??
Thank you
pickmod said:
Hello, this ROM for which the Xperia version is compatible?
For all codename "honami": Xperia Z1 C6902, C6903, C6906, C6943 ??
Thank you
Click to expand...
Click to collapse
C6903 for now, I don't have testers for the others, but I do think I could build it. Send me a pm if you are wanting to test it.
Error while trying to flash the ROM. Error 6 in TWRP.
Also can't fastboot the files inside the zip.
Downloaded this file 3 times already. Am I doing something wrong?
aquaboy11 said:
C6903 for now, I don't have testers for the others, but I do think I could build it. Send me a pm if you are wanting to test it.
Click to expand...
Click to collapse
Count me in as your tester..
Impossible to install for me too. I have E : Error executing updater binary in zip ' /external_sd/hybrid_concept....
nemesisexsp said:
Error while trying to flash the ROM. Error 6 in TWRP.
Also can't fastboot the files inside the zip.
Downloaded this file 3 times already. Am I doing something wrong?
Click to expand...
Click to collapse
benplay said:
Impossible to install for me too. I have E : Error executing updater binary in zip ' /external_sd/hybrid_concept....
Click to expand...
Click to collapse
This should be fixed now.
aquaboy11 said:
This should be fixed now.
Click to expand...
Click to collapse
Nice non it's fixed and aller works smoothly, but how can we change dpi? Can we flash universal path? I don't underground the système ui thing you said on Xperia zu post#2
benplay64 said:
Nice non it's fixed and aller works smoothly, but how can we change dpi? Can we flash universal path? I don't underground the système ui thing you said on Xperia zu post#2
Click to expand...
Click to collapse
To change the doing you need to edit the build.prop. Open it up with any build.prop editing app and look for ro.sf.lcd_density, just typing lcd in search should be enough. Adjust the dpi to your liking, save and reboot.
For the universal path, I think you should be able to just flash it. If it doesn't work, then just reflash the rom and you'll be good to go. Be sure to tell us if it doesn't work.
aquaboy11 said:
To change the doing you need to edit the build.prop. Open it up with any build.prop editing app and look for ro.sf.lcd_density, just typing lcd in search should be enough. Adjust the dpi to your liking, save and reboot.
For the universal path, I think you should be able to just flash it. If it doesn't work, then just reflash the rom and you'll be good to go. Be sure to tell us if it doesn't work.
Click to expand...
Click to collapse
Downloading and will flash on a moment. Will let you know how it goes...
Edit:all is working like a charm! Applied a whole layers theme (prime), no bootloops or any other issues... PexoCam is not working though, will try some more cam mods and report wonderful job guys! Thank you so much!
Okay so I don't think I will try advanced path because inside there is a zu system ui.apk so it will probably not work. But I saw that substratum have just been put to Google play store. Can we use it or it needs to add pluggins in the rom?
benplay64 said:
Okay so I don't think I will try advanced path because inside there is a zu system ui.apk so it will probably not work. But I saw that substratum have just been put to Google play store. Can we use it or it needs to add pluggins in the rom?
Click to expand...
Click to collapse
I tried it a while ago and it does not seem to work. The app FCs when trying to open a theme.
benplay64 said:
Okay so I don't think I will try advanced path because inside there is a zu system ui.apk so it will probably not work. But I saw that substratum have just been put to Google play store. Can we use it or it needs to add pluggins in the rom?
Click to expand...
Click to collapse
It will work.
UI is actually from Z3 and it's working on Ultra.
Why it won't work with on Z1?
Only thing is changed is dpi, which can be done in build.prop.
Btw if u applying themes, apply framework for Android M!
After some hard work i like to share you the first working optimized stock rom from version 11M with stock kernel (for now).
This rom is a minimal rom, as i like it. No Google services or Framework inside.
I will provide extra packs for google stuff.
Main features:
- full deodexed
- De-bloated (Removed Google & some LG Apps)
- Kernel is free from dm-verity and root check
Tweaks:
- Jpeg and Video optimization
- remove some debug
- high Impedance Mode All The time (big thanks @Whiskeyomega)
- build.prop optimization
Installation:
You need an open Bootloader!
This rom is ONLY FOR H930!
You can flash the rom inside twrp.
After flashing the rom please install the neweset magisk root.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Then wipe Dalvik/ART and Cache.
Feedback:
If you find some bugs or something is not working correct, please contact me.
Future Release:
- include magisk installer
- include new modem
- you tell me
Download:
Version without Google:
https://drive.google.com/open?id=11Zy0Sac9LXZDqHODosPDBmsGtdedI8ob
Version with all Apps:
https://drive.google.com/open?id=18xDw6X5SYF9FBwZTyGWmEKthICWf5h08
XDAevDB Information
Debloated Stock ROM Open EU 11m
Contributors
djsven
Source Code: http://opensource.lge.com
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2018-01-25
Created 2018-01-25
Last Updated 2018-01-25
Downloading and testing right now! MANY MANY THANKS!!
You are the first one..
Thanks me after you test it
Dumb question now that i read it ... Google service and Framework free ... can i flash Gapps?
Not realy i guess..the gapps are for aosp roms ?
If, you do not flash this..
I will provide tomorrow an update packet for it.
Have you flashed the rom?
Dirty flashed from 10f for now. Google FC's as thought. Tried flash gapps but the same. Ok then i will restore twrp backup. Cannot test more after i am in montenegro the whole weekend where i have no time to test/flash more. Need a working system for the weeken. ....
Sent from my LG-H930 using XDA-Developers Legacy app
Oh wow....Yea i havent the time to fix my rom really. had problem after problem IRL so im glad someone else got there.
@ Whiskeyomega
Thanks
@ Mr. Schnabel
I will upload a new ZIP with Google Inside.
Flashing right now...
Edit1: No way... It tells me The encription did not succeed ! And i have to reboot the phone...
Thanks for your anwer.
So you did encrypt your phones data partition?
Realy strange.
Is this the only message?
My phone is not enctypted.
I will have a look on it.
djsven said:
Thanks for your anwer.
So you did encrypt your phones data partition?
Realy strange.
Is this the only message?
My phone is not enctypted.
I will have a look on it.
Click to expand...
Click to collapse
I followed the step from another user. I paste all steps.
"The order i flashed everything and how i set up everything was:
1) flash twrp and make sure it sticks
2) boot twrp
3) completly wipe /data, so twrp is able to mount it (you have to format the data partition.)
3.5) DONT reboot
4) flash no-verity-opt-encrypt-6.0.zip, root disabler and magisk
5) boot stock rom and setup everything (initial setup and so on)"
I wiped all data, system, internal, etc... also I formatted /data ....
I'll do some checks and I'll post the results.
Thx in advance
---------- Post added at 09:14 AM ---------- Previous post was at 08:58 AM ----------
It seems I partially solved. It boots but it stuck at "Checking for updates... This may take a minute or two"
Of course, as i saw, this rom does not include gapps so i'm unable to setup the google account, and that's why I select "set up as new".
Edit: I think i'm going to wait for the google framework included version How is it going?
Stock ROM with google is uploading now..
New Version with all google inside is up...
Would it be possible to flash micro gapps from opengapps onto the ROM with gapps removed?
Might try it out in a couple of hours and I'll report back.
djsven said:
New Version with all google inside is up...
Click to expand...
Click to collapse
It would be perfect if the gapps package incuded in the full version comes with some bloat
I mean movies, music, powerpoints, documents from google... For me this is bloat too
5 hours with the full version flashed and at the moment zero problems.
This is an idea..
Iam going to create a tool for deleting the bloatware which you want.
But my focus i on the kernel now.
Thanks for positiv feedback .-)
I need the phone working for the weekend but gonna definitely try this on Monday. Good work!
djsven said:
This is an idea..
Iam going to create a tool for deleting the bloatware which you want.
But my focus i on the kernel now.
Thanks for positiv feedback .-)
Click to expand...
Click to collapse
I'm trying again with the version without google and there is no way to enter the wifi key to continue. and it stops searching for updates. But it promises
Good job
fliky said:
Would it be possible to flash micro gapps from opengapps onto the ROM with gapps removed?
Might try it out in a couple of hours and I'll report back.
Click to expand...
Click to collapse
Just finished installing it with the no Google ROM and pico gapps it works great, just one hitch when installing I couldn't get the keyboard to come up on the screen.
Solved the keyboard issue by connecting an external keyboard and installing gboard from the play store.
Realy interesting.
@ fliky
Which keyboard you like to use?? Stock one or from google?
@all
This rom is the beginning!! The first one.
Now we have the base to do more.