Related
I tried toggling it on after the 4.1.2 update, but it won't let me the upgrade was done through OTA and carrier is Fido. Same thing with Bluetooth. It just toggles back to off on it's own.
Any help or suggestions? I'm thinking of restoring it to factory. I'm enquiring for my mom's boyfriend. He does have SuperSU installed but I don't think it's rooted because I'm pretty sure he won't know how to do that. Could this be causing the program?
He's thinking about going back to the iPhone which in my opinion would be a huge mistake after witnessing the note 2 for power myself haha.
Just tried doing a Factory Reset to no avail. Still toggling from on (for a brief second) back to off.
Re flash stock firmware.
Sent from my GT-N7100
UtkarshGupta said:
Re flash stock firmware.
Sent from my GT-N7100
Click to expand...
Click to collapse
Yeah that was going to be my next step, but then downloading the Firmware is going to take forever. I am thinking about flashing a Custom ROM so it will remove the bloatware with it. I'll update the thread when I get a chance.
EDIT: I was so smart yesterday that I flashed Stock Restore by accident and now I have to use someone's computer to flash CWM back into it or Unroot the phone...It was such a dumb mistake.........
Very well known to me issue...
1. Never attempt to undervolt Note 2, especially on low clocks. Don't play with RedPill kernel. Use stock, Adam or Perseus.
2. Flash stock 4.1.2
3. Shutdown, remove SIM, battery and SD card.
4. Press and hold the Power button for 30+ seconds (I used a full minute).
5. Insert the battery only, power on and try to enable BT and WiFi.
6. If succeeded - shutdown, insert SIM & SD, reassembly and power on. Verify again.
If not... you may try again or go to servicemen.
7. Later you can flash a custom ROM but beware of kernels and especially undervolt.
P.S. My old trusty Motorola Atrix doesn't like undervolt too. It looses BT...
Thanks man. It is super weird though because I don't think he had it rooted and I checked the Kernel that he had installed it showed it was the stock kernel. I will keep that in mine. I was also wondering and this maybe a newbie question. But n7100 can only flash stock n7100 4.1.2? I just find downloading the firmware will take forever.
Thanks for all your help guys. Will jeep you both updated.
Sent from my SGH-T889V using xda app-developers app
Any update?
My t889 have the exact same problem. Wifi and bluetooth won't switch on.
my galaxy note 2 does the same thing
I just purchased it and went to turn on wi fi to download apps quicker and it goes to on for a second....then just goes off. Same with bluetooth option.
wifi can't turn on as well as bluetooth
hello,
has anyone solved this problem? just came back form work today and try to turn on wifi but failed to do so. Please help...thanks in advance.
Thanks man
Thanks man
Same Problem with WIfi and Bluetooth
I experienced the Same issue sometimes when i removed my battery i can turn on my WiFi and Bluetooth but after a couple of days the Wifi and Bluetooth can't turn on again. Anyone already fixed this issue?
The back cover serves as the Wifi antenna. When you open the back lid, the two gold prongs on the upper right are the connections to the back cover (antenna). Make sure the contacts are clean and the back lid is attached completely. When insufficient contact is established, wifi will not turn on.
HTH
~Gary
zenmonster said:
The back cover serves as the Wifi antenna. When you open the back lid, the two gold prongs on the upper right are the connections to the back cover (antenna). Make sure the contacts are clean and the back lid is attached completely. When insufficient contact is established, wifi will not turn on.
HTH
~Gary
Click to expand...
Click to collapse
This is NFS antenna. Seems having nothing to do with GHz range internal antennas.
Anyway will do no harm to have it properly attached.
muz4 said:
Any update?
My t889 have the exact same problem. Wifi and bluetooth won't switch on.
Click to expand...
Click to collapse
Use a custom Rom like the jedi x 17 or jedi master 16.
Sent from my SGH-T889 using xda app-developers app
tenchu167 said:
Use a custom Rom like the jedi x 17 or jedi master 16.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Won't fix it as I've used both Jedi Master and Jedi X ROMs before reverting to rooted stock (which I'm still using) and the issue persists.I think this is a hardware issue.
jaekidd1012 said:
Won't fix it as I've used both Jedi Master and Jedi X ROMs before reverting to rooted stock (which I'm still using) and the issue persists.I think this is a hardware issue.
Click to expand...
Click to collapse
Verify with the Carbon ROM maby solve something
Sent from my SGH-T889 using XDA Premium 4 mobile app
Same problem over here
My problem has been on going since I bought thee damn thing
I bought it from someone for $500 back in April. The guy I bought it from must have been some sort of genius or something because every freaking repair place and computer places, in Tulsa, OK, have absolutely no idea what the guy that I bought it from did! I remember it had a custom ROM I think it was Jedix..sorry I am a noob and a girl at that :/
I have spent countless hours reading forum after forum to no avail.
So the guy that I bought it from asked me if I wanted regular 3g/4g speeds and wifi or fast internet speeds everywhere and no wifi. I, assuming that I could easily just turn wifi back on with the flip on the button, told him that I wanted fast internet and no wifi. I get home and try to flip wifi back on and nothing! Also no bluetooth. I was in contact with the guy that I bought it from and he did try to walk me through turning the wifi/bluetooth back on. He said it was simple..He had me wipe the cache, wipe the kernel, something to do with qual comm settings..blah blah I do not remember because it was months ago and so many things have been done to it since then. I shortly lost contact with him. If I am within 2 feet away from my router I can pick up great wifi but 3 feet away or further I am s.o.l. I can pick up a real weak connection in public places like my college or a hospital. I have paid every phone repair place and computer store here in Tulsa to try to fix it. They all do the same thing, just restore it with the exception of the last place that I took it to..they tried to but an older version on it thinking wifi/bluetooth had something to do with version it was on.
Please do not tell me that this is a hardware issue!- I have read countless forums and have read that I am not alone with this issue. It does however not look promising because I have never read of anyone fixing this issue. I have read things about it being the radio etc etc. I firmly believe that this is a software/programming issue however the people that I have seen this happen to never got it fixed..they eventually just gave up and bought new motherboards or new phones entirely. With that being said a motherboard could be a possibility..any ideas on how much a new motherboard cost? Sorry for being sooo long I am just so frustrated. This is such a beautiful phone and I have never gotten to fully take advantage of all of its capabilities because of this.
WIFI Bluetooth fix
Hello, I´ve also tried everything software related to no avail. So I finally disassembled the device as shown in videos found on youtube or elsewhere.
Google it!!
Reconnected the wifi chip. Turned the the device on and....wifi and bluetooth worked strongly!!! That fixed it for me!!
To be clear: I just took the screws and the plastic piece that covers the motherboard (Bee careful and patient and use the right tools!!). Then disconnected and reconnected the connector of the wifi chip, which is located right next to the lower volume button, on the board. It´s the only cable showing.
I´ve seen this problem on laptops, because of overheatin issues related to bad mainboard design, but I cannot be sure in this case without further testing.
I´ll see how long this fix lasts and I´ll keep posting.
wclub3 said:
Hello, I´ve also tried everything software related to no avail. So I finally disassembled the device as shown in videos found on youtube or elsewhere.
Google it!!
Reconnected the wifi chip. Turned the the device on and....wifi and bluetooth worked strongly!!! That fixed it for me!!
To be clear: I just took the screws and the plastic piece that covers the motherboard (Bee careful and patient and use the right tools!!). Then disconnected and reconnected the connector of the wifi chip, which is located right next to the lower volume button, on the board. It´s the only cable showing.
I´ve seen this problem on laptops, because of overheatin issues related to bad mainboard design, but I cannot be sure in this case without further testing.
I´ll see how long this fix lasts and I´ll keep posting.
Click to expand...
Click to collapse
joining the little troubled club :crying:
has it helped?
i loath to open the device otherwise...
gurila said:
joining the little troubled club :crying:
has it helped?
i loath to open the device otherwise...
Click to expand...
Click to collapse
It worked for a day and now it´s back to the same....To my understanding this is a hardware problem with the wifi/bluetooh chip.. I´m looking for the brand and model of the chip to see if I find it on Amazon so I can replace it.
wclub3 said:
It worked for a day and now it´s back to the same....To my understanding this is a hardware problem with the wifi/bluetooh chip.. I´m looking for the brand and model of the chip to see if I find it on Amazon so I can replace it.
Click to expand...
Click to collapse
any of these look like what ur looking for: (note 2 lte section)
http://stellatech.com/articles.php?lang=en&cid=10580
???
or maybe in the note 2 section?
http://stellatech.com/articles.php?cid=10552
BT antena
http://stellatech.com/samsung-gt-n7100-galaxy-note-2-bluetooth-antenna-(grey),a,en,813242.html
WIFI modul
http://stellatech.com/samsung-gt-n7100-galaxy-note-2-wifi-ic-module,a,en,813165.html
Hello and thanks for the help. I have an ATT Samsung Galaxy 3 i535. The phone got wet initially, I completely dried it out, turned it on and things seemed to be working great. Only problem was my mic fried, so no one could hear me talking on the phone. All other functions were flawless, camera, screen, etc...
So I ordered a new motherboard off Ebay with a clean IMEI for the i535 version of the Galaxy 3. The first mainboard I recieved was unlocked, and after installing, I noticed everything worked fine except I was recieving the "camera failed" message when I tried to open the camera app. I cleared the cache, downloaded a different camera app, same results. Camera would give me the failed message as soon as I opened it.
Thinking that the problem was possibly related to the unlocked replacement mainboard, I returned that item and ordered a second one. Installed fine, same results, "camera failed."
If I just put back in my original water damaged board, the camera works great. Could their be some incompatibility issues with my camera and the new boards? All boards are for a i535.
Phone Info:
SCH-1535
Android Version 4.1.2
Baseband Version I535VRBMF1
Kernel Version 3.0.31-1152558
[email protected] #1
Build Number JZ054K.1535VRBMF1
Hardware Version I535.10
Any help would be greatly appreciated!! Thanks!!!
Steve
Hey Steve, it's pretty cool to see that other people actually take their phones apart other than me
Anyways, I never came across a problem like that before. The worst I did to my phone after taking it apart so much was that I somehow broke the speaker. I got the whole phone replaced though, so that solved my problem. Are you under any warranty with your phone? If so, have you done anything too obvious that voided it? (other than taking your phone apart.)
When I returned my phone, I just said the speaker kept deteriorating until it was completely mute. If you can try to just say that your problem happened all of a sudden.
And have you considered trying a new camera module for the motherboard?
chistoefur said:
Hey Steve, it's pretty cool to see that other people actually take their phones apart other than me
Anyways, I never came across a problem like that before. The worst I did to my phone after taking it apart so much was that I somehow broke the speaker. I got the whole phone replaced though, so that solved my problem. Are you under any warranty with your phone? If so, have you done anything too obvious that voided it? (other than taking your phone apart.)
When I returned my phone, I just said the speaker kept deteriorating until it was completely mute. If you can try to just say that your problem happened all of a sudden.
And have you considered trying a new camera module for the motherboard?
Click to expand...
Click to collapse
Thanks for the reply. I'm a little worried as well that if I continue taking it apart I'll eventually screw something up!! I know the module itself is okay since it still works great with my original motherboard. The problem seems to be something relate to an incompatibility in the software. I'm thinking of following the instructions in the sticky to install a new ROM, and maybe that will do the trick. Im hoping someone posts a suggestion as to which I should start with since there seems to be a ton of options. Thanks for the advice though!!!
Well I've hammered through various posts and instructions, and eventually tried to root my phone and installed the Synergy ROM in hopes it would solve my problems.
Synergy install went great, but the camera is still failing when I open it. After more research, it looked like I needed to change my kernel to be compatible with Synergy Rom (r484) as well. I flashed the KT747 kernel in hopes that it would resolve the camera issue. Still no go.
Just to recap, the camera is working fine with my original stock motherboard, just not the replacement boards. To me, that would seem to rule out a hardware problem with the camera module itself... but I can't understand why I can't get it to work with either of the replacement boards.
Should I switch to a different ROM? Any ideas on which might be best? Thanks.
Any advice would be mucho appreciated! Thanks!!
during the replacement mainboard, you did plug the little connector from the camera back into the mainboard correct?
not1035 said:
Well I've hammered through various posts and instructions, and eventually tried to root my phone and installed the Synergy ROM in hopes it would solve my problems.
Synergy install went great, but the camera is still failing when I open it. After more research, it looked like I needed to change my kernel to be compatible with Synergy Rom (r484) as well. I flashed the KT747 kernel in hopes that it would resolve the camera issue. Still no go.
Just to recap, the camera is working fine with my original stock motherboard, just not the replacement boards. To me, that would seem to rule out a hardware problem with the camera module itself... but I can't understand why I can't get it to work with either of the replacement boards.
Should I switch to a different ROM? Any ideas on which might be best? Thanks.
Any advice would be mucho appreciated! Thanks!!
Click to expand...
Click to collapse
I just purchased the M9 International version 3 days ago. Since receiving it I can not get the universal remote app to work. I've verified that the IR blaster is not functioning by doing the camera trick. I also have a IR receiver for my PC that lights up anytime it senses an IR signal. It has never lit up.
I've run the RUU for the unlocked/developer version (3.35.617.12) from HTC's website twice now with no success. The first attempt was after I had heavily modified the OS. The second attempt was right after running the RUU.
So my question is are the some versions of the M9 that do not have an IR blaster, am I missing something with the RUU's that would cause the IR blaster not to function, or am I looking at a defective phone that should be sent back?
My bootloader is unlocked and the phone came S-off.
BrownEye02 said:
I just purchased the M9 International version 3 days ago. Since receiving it I can not get the universal remote app to work. I've verified that the IR blaster is not functioning by doing the camera trick. I also have a IR receiver for my PC that lights up anytime it senses an IR signal. It has never lit up.
I've run the RUU for the unlocked/developer version (3.35.617.12) from HTC's website twice now with no success. The first attempt was after I had heavily modified the OS. The second attempt was right after running the RUU.
So my question is are the some versions of the M9 that do not have an IR blaster, am I missing something with the RUU's that would cause the IR blaster not to function, or am I looking at a defective phone that should be sent back?
My bootloader is unlocked and the phone came S-off.
Click to expand...
Click to collapse
Verify in Antutu if the sensor is detected.
If not detected it could be a fake.
If detected, might be a hardware fault.
Fain11 said:
Verify in Antutu if the sensor is detected.
If not detected it could be a fake.
If detected, might be a hardware fault.
Click to expand...
Click to collapse
Where in Antutu would it reference the IR blaster? I looked in the info section but did not see a field where it would give details on the IR hardware.
Looking at what Antutu reports for all my other pieces of hardware it does not appear I have a fake. I also verified my phone was built in Taiwan Taoyuan B factory using this thread. I also unlocked the bootloader through HTC's dev website. But I know a common saying around here is China is getting better at faking phones. I would just hope there not this good.
BrownEye02 said:
Where in Antutu would it reference the IR blaster? I looked in the info section but did not see a field where it would give details on the IR hardware.
Looking at what Antutu reports for all my other pieces of hardware it does not appear I have a fake. I also verified my phone was built in Taiwan Taoyuan B factory using this thread. I also unlocked the bootloader through HTC's dev website. But I know a common saying around here is China is getting better at faking phones. I would just hope there not this good.
Click to expand...
Click to collapse
Yep, sorry, all sensors, no ir...
Now this one works:
Search in the market:
android hardware info
Download the one made by jfdp labs.
Open it, in the features section, u have Android hardware:
The 9th item should be Android hardware consumerir
Fain11 said:
Yep, sorry, all sensors, no ir...
Now this one works:
Search in the market:
android hardware info
Download the one made by jfdp labs.
Open it, in the features section, u have Android hardware:
The 9th item should be Android hardware consumerir
Click to expand...
Click to collapse
Ok, yes it is listed there. So I'm guessing the OS see's the IR blaster. Now it just comes down to if its a hardware issue or software issue.
BrownEye02 said:
Ok, yes it is listed there. So I'm guessing the OS see's the IR blaster. Now it just comes down to if its a hardware issue or software issue.
Click to expand...
Click to collapse
As u have already gone back to stock with RUU, it seems like a hardware fault.
Sorry!
You could try reflashing the firmware, but only after u get to know well the procedure.
A bad flash can brick your phone.
Fain11 said:
As u have already gone back to stock with RUU, it seems like a hardware fault.
Sorry!
You could try reflashing the firmware, but only after u get to know well the procedure.
A bad flash can brick your phone.
Click to expand...
Click to collapse
Ill look into the process of reflashing the firmware. I will need to relock the bootloader before I can send the phone back anyways and that will be a process.
I'm guessing it can be done but, does anyone know how to interact with the IR Blaster in ADB or terminal emulator? I'm thinking if I can at least force the IR blaster to do something that would tell me for sure if its working.
Fain11 said:
As u have already gone back to stock with RUU, it seems like a hardware fault.
Sorry!
You could try reflashing the firmware, but only after u get to know well the procedure.
A bad flash can brick your phone.
Click to expand...
Click to collapse
So after reading this thread on how to flash firmware. My understanding is flashing the RUU's from HTC's website flashes the firmware. Am I correct in thinking this?
Have you tried the peel remote app?
Sent from my HTC One M9 using Tapatalk
shivadow said:
Have you tried the peel remote app?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Yes since that's the remote app that comes preinstalled. I have also tried 2-3 other remote apps with no success.
BrownEye02 said:
So after reading this thread on how to flash firmware. My understanding is flashing the RUU's from HTC's website flashes the firmware. Am I correct in thinking this?
Click to expand...
Click to collapse
Yes!
OK. I will request a replacement unless anyone else has some suggestions.
Thanks for the help.
There's not a lot you CAN do.. It either works or doesnt. Must be faulty. Maybe a faulty diode?.
Shame really.
Sent from my HTC One M9 using Tapatalk
Hey man,
I had the same problem as you and tried couple of things to get the infrared work ,and finally I found the problem.
I don't know if you are in the same case but I bought a refurbished phone in aliexpress and they change some pieces with non genuine one. So I verified if the plastic cover at the top was TRANSPARENT enough to let the infrared light pass trough. The result was negative, so I decided to remove it (its very easy)
And did the cam test and SURPRISE it worked like a charm.
So the top rail plastic didn't let the light pass. I cut a little hole in the plastic where there is the infrared led.
I looked on internet for a genuine part but it cost 9$ with shipping to EU so if anyone know a place which provided this piece with a better price I will surely thank him !
Arto said:
Hey man,
I had the same problem as you and tried couple of things to get the infrared work ,and finally I found the problem.
I don't know if you are in the same case but I bought a refurbished phone in aliexpress and they change some pieces with non genuine one. So I verified if the plastic cover at the top was TRANSPARENT enough to let the infrared light pass trough. The result was negative, so I decided to remove it (its very easy)
And did the cam test and SURPRISE it worked like a charm.
So the top rail plastic didn't let the light pass. I cut a little hole in the plastic where there is the infrared led.
I looked on internet for a genuine part but it cost 9$ with shipping to EU so if anyone know a place which provided this piece with a better price I will surely thank him !
Click to expand...
Click to collapse
Thanks Arto!
I bought the phone on ebay and it has the same problem. The top black rail isn' t trasparent and it doesn' t allow the infrared light to pass, also there is more glue on the led. I removed it and now the ir blaster works!
try peel remote from play store. mine worked
I dicovered why my IR blaster is not working....the top cap is to thick to let the light go out, If I remove it I can change channels without any troubles, I even see the light using a camera.
Hey everybody.
I know it has been a long time since the post was created but just right now I found the solution for the IR not to work on HTC One M9.
The problem is that little black plastic cover piece that serves for beauty and covering.
I just removed it and the IR Remote worked perfectly.
At first I thought that the glue was covering it making it not work.
I cleaned the glue and placed the cover back and the IR stopped working, so the problem really is that plastic cover.
Now that leads us to another question, what to do with the cover?
Hope that helps!
Miclos said:
Hey everybody.
I know it has been a long time since the post was created but just right now I found the solution for the IR not to work on HTC One M9.
The problem is that little black plastic cover piece that serves for beauty and covering.
I just removed it and the IR Remote worked perfectly.
At first I thought that the glue was covering it making it not work.
I cleaned the glue and placed the cover back and the IR stopped working, so the problem really is that plastic cover.
Now that leads us to another question, what to do with the cover?
Hope that helps!
Click to expand...
Click to collapse
It would seem that your ir diode would be getting weak and can no longer shine past the dark plastic, or you have too much ambient light.
My IR diode is working fine so yours must be faulty.
Beamed in by telepathy.
I think my plastic is not "original" and thus thicker and darker than it should be.
I just made a very small cut with a hot needle in it and now is working fine.
I will research for this piece of plastic to see if there is anyone talking about it
Hi, maybe you can help me.
I used kdz to install 6.0 in my lg g3, everything is working fine except for the camera, i turn the phone off twice and now the only thing that is working is the front facing camera.
I tried factory reset and some camera apps but the problem is still there.
Can you guys help me?.
Thanks and im sorry for the bad english, im from argentina.
EDIT: I MAGANED TO SOLVE THE ISSUE, I HAD TO PUT A PIECE OF PAPER IN THE BACK OF THE PHONE. THANKS =)
I seem to have the same problem... both on Jasmine ROM and the latest and greatest RR rom. How did you fix the camera problem?
raghublr said:
I seem to have the same problem... both on Jasmine ROM and the latest and greatest RR rom. How did you fix the camera problem?
Click to expand...
Click to collapse
Hi man, at first i was able to solved it with a piece of paper in the back of the phone, but ultimately i had to buy a new camera, i install it and its working great, now im having issues with battery and restart loop but i left the phone at the sat.
lapocha5 said:
Hi man, at first i was able to solved it with a piece of paper in the back of the phone, but ultimately i had to buy a new camera, i install it and its working great, now im having issues with battery and restart loop but i left the phone at the sat.
Click to expand...
Click to collapse
Where exactly did you place the paper? Any photos would be appreciated! Thanks!
I've been experience the same problem, could you explain a little bit more how did you solve it with the piece of paper? It doesn't mind if it is in Spanish, the we can translate it. Thanks!
Please help us!!
lapocha5 said:
Hi, maybe you can help me.
I used kdz to install 6.0 in my lg g3, everything is working fine except for the camera, i turn the phone off twice and now the only thing that is working is the front facing camera.
I tried factory reset and some camera apps but the problem is still there.
Can you guys help me?.
Thanks and im sorry for the bad english, im from argentina.
EDIT: I MAGANED TO SOLVE THE ISSUE, I HAD TO PUT A PIECE OF PAPER IN THE BACK OF THE PHONE. THANKS =)
Click to expand...
Click to collapse
Please explain a little better what you mean for "put a piece of paper in the back of the phone", it could be a solution for a lot of people here on xda
Here is the link, the piece of paper work really really well.
Sorry for me being late.
http://forums.androidcentral.com/lg-g3/576181-how-can-i-stop-my-lg-g3-restarting-constantly-3.html
edoardotavecchio said:
Please explain a little better what you mean for "put a piece of paper in the back of the phone", it could be a solution for a lot of people here on xda
Click to expand...
Click to collapse
lapocha5 said:
Here is the link, the piece of paper work really really well.
Sorry for me being late.
http://forums.androidcentral.com/lg-g3/576181-how-can-i-stop-my-lg-g3-restarting-constantly-3.html
Click to expand...
Click to collapse
But that explains how to stop G3 from rebooting, not to repair rear camera, it's completely ot
edoardotavecchio said:
But that explains how to stop G3 from rebooting, not to repair rear camera, it's completely ot
Click to expand...
Click to collapse
I put that piece of paper and the camera started to work just fine, dunno if you could solve another issue, the piece of paper next to the camera not the one with the battery
lapocha5 said:
I put that piece of paper and the camera started to work just fine, dunno if you could solve another issue, the piece of paper next to the camera not the one with the battery
Click to expand...
Click to collapse
Could you please send me a photo? I didn't found the post where it's explained, in the thread you've linked
Oh, Yes, I've done it. No luck. Problem's still here.
Update: the problem got fixed for about 10 minutes, before appearing again.
edoardotavecchio said:
Could you please send me a photo? I didn't found the post where it's explained, in the thread you've linked
Oh, Yes, I've done it. No luck. Problem's still here.
Update: the problem got fixed for about 10 minutes, before appearing again.
Click to expand...
Click to collapse
Sorry man, not happy to heard that, i think you should buy another camera.
I've done just about everything. There's a log cat below. EVERY ROM, EVERY KERNEL STOCK OR CUSTOM, this issue is there after the first reboot. Im only going to answer every question that goes like "have you tried...." With a full rundown of what I did and results. I will remind I've tried every custom nougat rom, stock or custom and I've tried stock marshmallow rom to. Also some roms haven't even had sound on first boot. Some roms will work for a bit then they will do a soft reboot that takes 30-45 minutes to complete. Then have no sound. I'm open to taking my phone apart since my screen is fu*ked up. Im begging at this point I love this phone, I've had it for 2 months, I don't want to have to buy another one.
Tried unbrick tool yet? That may have a slightly different effect than just flashing stock ROM (as it completely nukes the device and installs everything again).
Anyways, you may have a hardware issue. In that case taking the phone apart won't do much ... You can only check the connections, that's about it.
Sent from my OnePlus 3 using Tapatalk
Explorer23 said:
Tried unbrick tool yet? That may have a slightly different effect than just flashing stock ROM (as it completely nukes the device and installs everything again).
Anyways, you may have a hardware issue. In that case taking the phone apart won't do much ... You can only check the connections, that's about it.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
I did actually brick it awhile back trying to solve that damn sound issue. I used the mega unbrick guide to fix it, I can try again. Cause hell who knows it might fix it. Thanks for the recommendations.
Found out it is hardware i narrowed it to the aux port board which is what the fingerprint sensor, microphone, speaker connect to. I'm ordering a new part tomorrow for it
Did you find any solution? Im having the same issue and trying to figure out how to fix tihs
Dlind said:
Found out it is hardware i narrowed it to the aux port board which is what the fingerprint sensor, microphone, speaker connect to. I'm ordering a new part tomorrow for it
Click to expand...
Click to collapse
Please give me the link to buy. Im having same issue too. And i think its hardware
xsetiadi said:
Please give me the link to buy. Im having same issue too. And i think its hardware
Click to expand...
Click to collapse
Well, when I bought the new part and replaced it, it didn't do anything. But I can still give you a link, I need up getting a htc 10 cause I was sick of the phones bs. https://m.ebay.com/itm/OEM-Earphone...%3Ac0cbdf2615e0ab10a81ff986ffd94c65%7Ciid%3A6
Dlind said:
Well, when I bought the new part and replaced it, it didn't do anything. But I can still give you a link, I need up getting a htc 10 cause I was sick of the phones bs. https://m.ebay.com/itm/OEM-Earphone...%3Ac0cbdf2615e0ab10a81ff986ffd94c65%7Ciid%3A6
Click to expand...
Click to collapse
You mean this not rix the problem?
I
xsetiadi said:
You mean this not rix the problem?
Click to expand...
Click to collapse
It could for you, but it didn't change a thing for me. Every phones diffrent.