Related
Hi guys. Big problem here. I tried several times to install that xposed module. Everytime it ended in a bootloop. I tried v78 and v79 both sdk23-arm64. Neither of them worked. Can somebody tell me what I'm doing wrong?(aslo, ask if you need any file, I'll provide them). Thanks in advance!
Have you got any modules installed?
F1Fanatic27 said:
Have you got any modules installed?
Click to expand...
Click to collapse
Nope, fresh install. Need to roll back to Lollipop.
Xposed only works on deodexed roms.
If you try to install on stock MM rom it doesn't work giving you bootloop.
There's a file on app and theme sub forum with deodexed apps that you can flash or just flash Genisys rom.
So i can flash the new Xposed v79 on my Genisys 3.4 Lg w/o problems? Thought only the in rom v78 is working?
v79 was just released.
But it should work on Genisys rom as v78.
Just make a backup or simply if something goes wrong flash the Uninstaller provided on xposed thread.
Ok guys. I will try later today. I'll tell you then the results.
azZA_09 said:
Ok guys. I will try later today. I'll tell you then the results.
Click to expand...
Click to collapse
u got Lollipop? = sdk22... 78/79 arm64
u got MM? =sdk23... 78/79 arm64
BFruchtfliege said:
u got Lollipop? = sdk22... 78/79 arm64
u got MM? =sdk23... 78/79 arm64
Click to expand...
Click to collapse
Yeah mate, I know. I have bootloop only on MM. LL works fine.
anyone tried already v79 on Genisys 3.4? working or bootlooping?
paratox said:
anyone tried already v79 on Genisys 3.4? working or bootlooping?
Click to expand...
Click to collapse
I just upgraded Genisys 3.4 from xPosed 78 to 79. Since 3.4 came with 78 baked in, I did not expect this to work, but atm the phone has booted and is in the Optimizing app stage. I should be good to go.
BTW, I did do an xPosed Uninstall from twrp before installing 79.
Confirmed. This worked for me.
paratox said:
anyone tried already v79 on Genisys 3.4? working or bootlooping?
Click to expand...
Click to collapse
I tested V79 no problem... but first Flash uninstaller xposed, after flash xposed v79. and wipe dalvik-cache reboot...
Sooo, guys, the only solution to my problem is to deodex the rom? There is no other way? OK, I'm trying this right now. I'll post the results.
update: Finally, it booted up. Now the problem is that deodexed rom has A LOT OF PROBLEMS (bluetooth,keyboard etc etc don't work). I'm wating another suggestions.
patalao said:
Xposed only works on deodexed roms.
If you try to install on stock MM rom it doesn't work giving you bootloop.
There's a file on app and theme sub forum with deodexed apps that you can flash or just flash Genisys rom.
Click to expand...
Click to collapse
Hi,
are you sure about that? Xposed worked for me with the Lollipop stock rom but not with the Marshmallow (20A 25.11.2015) one on my H815. Can you point me to another source that states xposed won't work on LG stock roms. I can't find anything about that.
thx.
Yes i´m shure.
If that wasn`t true someone already should give you an answer.
See the post above yours that states that after flashing deodexed apps it started to work but have some problems.
Lollipop is not Marshmallow.
If it works on one it doesn`t mean it`s going to work on the other.
Same thing as root,on Lollipop you can get it without unlocking bootloader,on Marshmallow that`s just not possible for now.
I`m not pointing to any source because there`s no need for it.
Try iit for your self and you will have your answer since you seem not to believe the post mentioned here and what i told you.
Okay, calm down, everything is fine. I am well aware of the fact that Lollipop is not Marshmallow, but you stated xposed doesn't work on non deodexed roms which is a false statement since it works with stock LG Lollipop rom. Whatever, will have to wait till the custom roms get less buggy.
greets
I told it only works on deodexed rom because this thread as the title says "Xposed for Marshmallow" it's self explanatory.
I didn't thought I needed to be more specific.
I'm sorry for that, I'm not being rude.
Genisys rom is not buggy, it's very stable.
Other than that you have to wait for another xposed release to see if it works with non deodexed stock Marshmallow rom.
Cheers and happy holidays
Yeah, I see now how you meant it. Do you recommend Genisys rom?
happy holidays to you to
Yes.
Not because it's the only stock rom based still being manteined but because it's stable enough.
Hello.
After many many tinkering and a small hint from @rovo89, finally i can present you the first stable version of the grorkmod.
Added v1.7 LineageOS-Version
Fix for bluetooth
Updated Audio_policy.conf will be copied. Result is a working audio.
Click to expand...
Click to collapse
Added v1.0 LineageOS-Version
Until the fix is integrated in the Rom, you can use the LOS-Version for a working fm-radio.
The Fix will add the following rights to selinux:
system_app fm_device:chr_file {write, read, open, ioctl}
This is a quick'n'dirty way.
Click to expand...
Click to collapse
Added v1.1 lite
In this version the fix is the same, but the script dont need an installed superuser. Also it will leave the system untouched.
Ive tested this version with Eragon v4.0 (With Gravitybox as testmodule, guess what... its working. Ive NOT tested if magisks will work properly with banking apps. please do it for me.
Click to expand...
Click to collapse
Review betaversions
In the past versions i have tried to workaround the problem.
At projectstart i have seen many audit denies. I tried to eliminate them with injecting allows to the sepolicy.
This was a part of the little success i had with the first versions. The other part was to set the classes internally to permissive.
These two components and the "bootprocesshack", in which i changed the sepolicy-binary in root, made the beta versions working.
The problem in the beta version was always, that in some cases the workaround didn't worked.
Click to expand...
Click to collapse
Stable
After an hint that @rovo89 gave me, i saw the problem in seconds, and.... *FACEPALM*
I've saw the problem and didn't saw it anyway.....
For a reason i don't know (maybe it's just a fault from Elephone or mediathek?) they "forget" to setup the contexts files not correctly.
With this mod i fix the entries in the seapp_contexts and file_contexts.
This is the whole magic.
Click to expand...
Click to collapse
Installation
Wipe Dalvik/Cache
Install ROM
Install SuperSU
Install grorkmod
Install xposed
then boot to system
Click to expand...
Click to collapse
Have fun with a fully working ROM!
greetings
vsrookie
CREDIT / INSPIRATION
@Chainfire - for his overwhelming work. @rovo89 - for making apps bend like metal
@skeleton1911 - for making his rom and his work
@Mikos - for his setools for android
@Deepflex - for all the work done to our device
Click to expand...
Click to collapse
Download mod LOS-Version v1.7
Download mod v1.1 lite
Download mod v1.0
Alternative Download
alternative Download mod v1.0
older Versions:
Download mod LOS-Version v1.5
Download mod LOS-Version v1.0
Download mod v0.94
Mirror v0.94
Download mod v0.8
Download mod v0.7
Download mod v0.6
Download mod v0.5
old Projectdescription:
About
This is a solution to get the xposed framework running in enforcing mode AND keep it running after a reboot, dalvik cache wipe and installation of any app.
The main goal is for sure the working xposed framework in enforcing mode, but as we all noticed there are several issues that come with a script that only set the selinuxmode to permissive. That's the second part of this project, trying to not change the behaviour of apps like on stockrom.
Click to expand...
Click to collapse
Background
As i get the p9000 and installed eragon the first time, i installed the xposed framework as fast as i can and.... everything works? Installed modules and... nothing worked!? I tried some things to get it working, but with everything i tried, i had to take a smear.
Pretty annoying, isn't it?
I took a deeper look into selinux and tinkered.... and tinkered ... and tinkered!
Now i think it's time to share my stuff with this great community and i hope that i will help with my mod.
Click to expand...
Click to collapse
BEWARE/Disclaimer
If you don't know what selinux is, then i think you have to read a "little bit" about it. (pure linux stuff; non Android)
If you google it, then you find everything you need, to learn more about it. If you don't know what rooting is, then play Angrybirds instead.
Understand this:
SELinux is a abbreviation for Security Enhanced Linux. That isn't just a name, it's the programm.
With this mod you will loose the S in the name.
Please be sure you have made a backup from everything that's important for you.
I've done this mod in all conscience, but I'm not responsable for bricked devices. Realize it!
You have been warned! :good:
Click to expand...
Click to collapse
The idea behind
This mod installs setools binaries to /su/bin, so you use them on terminal with this mod. We need them to inject permissions to the sepolicy binary. The next problem is, that the original sepolicy is compiled into the kernel (rootfs). Thats why it will be overwritten on boot. If you inject permissions manually, they are gone with every reboot. So i wrote a script that injects permissions on boot to a patched (with superkernel) sepolicy binary and copy it to root.
Click to expand...
Click to collapse
Installing
Now the funny part! :highfive:
What you need
I tested this mod on Eragon v2.8 and Aerom V3.
So you need one of these Roms (i think it will also work on rooted stockrom and Darksense, cause the two three other based on stockrom)
superSu 2.74
xposed framework v85
and of course my mod (see the attachement).
How to
Download everything to your SDCard.
Make sure you have wiped your device, so you can start fresh. (I don't have tried, only to flash this mod.)
Dont reboot. If you reboot, then reboot into recovery again!
Install the rom of your choice. (If you install Eragon v2.8, then be sure to delete the script inside /system/etc/init.d)
Install SuperSu 2.74
Install XposedFramework v85
Install Grorkmod
After this step just reboot. And check if everything is fine.
If not then let me know!
Click to expand...
Click to collapse
XDA:DevDB Information
Grorkmod, Tool/Utility for the Elephone P9000
Contributors
vsrookie
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2016-09-17
Current Beta Version: 0.94
Beta Release Date: 2016-06-09
Created 2016-06-09
Last Updated 2017-02-17
Reserved
LineageOS-Versions
v1.7
- FIX for not working audio over Bluetooth.
LineageOS-Versions
v1.0
- FIX for not working FM-Radio
Stockrom-Versions
v1.1 (lite version; systemless)
- reworked the script, so it will run systemless
- init.d support don't implemented in this version
- old grorkmods wil NOT be removed. So you have to install this one from scratch.
v1.0 (STABLE RELEASE!)
- live patching seapp_contexts and file_contexts
- live patching sepolicy binary at flashing time, add some allows were missing
- add init.d support as supposed to be
- disabling old grorkmod versions at flashin time.
v0.94
- live patching sepolicy binary at flashing time.
- works on all stockbased Roms
- Add init.d support, if it is not implemented already (For Stockrom; busybox EXCLUDED; it has to be installed afterwards to /system/xbin).
Minor changes are:
- cleared out Installer
Current issues:
- sometimes it's lost on reboot. Workaround: just reboot another time, or shutdown phone and reboot again.
v0.8
tidied up scripts
changed hook for injecting sepolicy
v0.7
simplified script
fixed an issue if phone shutdown
v0.6
fixed logcat support in scripts.
v0.5
Beta release
What exactly does your mod do then?
Sent from my P9000 using Tapatalk
mrbubba999 said:
What exactly does your mod do then?
Sent from my P9000 using Tapatalk
Click to expand...
Click to collapse
Hi.
Thank you. Didn't noticed!
I've added "the idea behind" to the first post.
greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app
do you need the xposed app?
Hi.
What do you mean?
You have to install it for installing xposed modules. Just install it after boot.
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers mobile app
ok, thanks. did a quick test with AeromV3. At first gravitybox, app settings, flat color keyboard* worked after a soft reboot. Ebay app also worked.
Then on next soft reboot there was 2 loops of optimizing apps and only gravity worked.
Shut off the phone and restarted, none worked. After what I have read that was expected.
Did a soft reboot in xposed,then loops of android is starting- optimizing app . after third loop i shutdown the phone and restarted. Then xposed did not work. Tried another soft reboot, this time no loop and xposed modules are working and ebay app works.
mangoman said:
ok, thanks. did a quick test with AeromV3. At first gravitybox, app settings, flat color keyboard* worked after a soft reboot. Ebay app also worked.
Then on next soft reboot there was 2 loops of optimizing apps and only gravity worked.
Shut off the phone and restarted, none worked. After what I have read that was expected.
Did a soft reboot in xposed,then loops of android is starting- optimizing app . after third loop i shutdown the phone and restarted. Then xposed did not work. Tried another soft reboot, this time no loop and xposed modules are working and ebay app works.
Click to expand...
Click to collapse
Hi.
Never tried to softreboot the phone. I will try and report back as fast as i can.
Did you made a clean install? Or dirty flashed the mod?
greetings
vsrookie
clean AeromV3 install. normal reboots do not work
Good I have 3 sim cards on same number the way I mess with my phones.
Hi.
Tried to softreboot the phone from xposed installer. That don't work, that's sure.
On Eragon normal reboots work. I will test with Aerom soon.
greeting
vsrookie
Sent from my P9000 using XDA-Developers mobile app
ok, will test eragon. It stopped working altogether now on AeromV3 after several soft reboots, shutdowns and normal reboots.
gravitybox seemed to work, but other modules seemed to stop. Disabled gravity but that did not seem to work.
Also the android starting, optimizing app message loops seems random.
Seems better on eragon. Works after normal reboot, and from powered off. Ebay also works.
edit2..
so after installing same apps and some reboots, xposed modules will not function sometimes. A few reboots and this time they came back working.
one app that does not work is amplify, maybe just coincidence but that one seems to brake the other when selected.
mangoman said:
ok, will test eragon. It stopped working altogether now on AeromV3 after several soft reboots, shutdowns and normal reboots.
gravitybox seemed to work, but other modules seemed to stop. Disabled gravity but that did not seem to work.
Also the android starting, optimizing app message loops seems random.
Seems better on eragon. Works after normal reboot, and from powered off. Ebay also works.
edit2..
so after installing same apps and some reboots, xposed modules will not function sometimes. A few reboots and this time they came back working.
one app that does not work is amplify, maybe just coincidence but that one seems to brake the other when selected.
Click to expand...
Click to collapse
Is your edit 2 referring to eragon 2.8?
yes.
3-4 reboots, and not working. 1 soft reboot and they came back.
so seems a luck of the draw when it works after a reboot.
mangoman said:
yes.
3-4 reboots, and not working. 1 soft reboot and they came back.
so seems a luck of the draw when it works after a reboot.
Click to expand...
Click to collapse
Thanks, I'll leave it for now.
I made a backup of my eragon before I did any xsposed stuff, I can install that for eBay etc ...
PS - so I can't install this with xposed already running?
mangoman said:
yes.
3-4 reboots, and not working. 1 soft reboot and they came back.
so seems a luck of the draw when it works after a reboot.
Click to expand...
Click to collapse
That s not true.... sorry.
I am on aeromv3 right now rebooted around 5 times (normal, not over xposedinstaller).
Everything works as expected. Even with amplify.
Do you use backuped Apps?
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers mobile app
arlrb said:
Thanks, I'll leave it for now.
I made a backup of my eragon before I did any xsposed stuff, I can install that for eBay etc ...
PS - so I can't install this with xposed already running?
Click to expand...
Click to collapse
Hi.
You have to do a clean install of the Rom of your choice. Install newest supersu and xposed, install this mod.
Everything should work fine.
If it is not so, there is another Problem. Maybe backuped Apps?
Greetings
Vsrookie
PS: if you install Eragon, don't forget ti delete the initd Script.
Sent from my P9000 using XDA-Developers mobile app
yes, strange. At first on eragon it worked with reboots, but after a few of them not so much. Then soft reboots seemed to do the trick.
Right now got amplify working. This time did not enable it in xposed first, but rather ran the app then enabled it in xposed when it asked.
vsrookie said:
Hi.
You have to do a clean install of the Rom of your choice. Install newest supersu and xposed, install this mod.
Everything should work fine.
If it is not so, there is another Problem. Maybe backuped Apps?
Greetings
Vsrookie
PS: if you install Eragon, don't forget ti delete the initd Script.
Sent from my P9000 using XDA-Developers mobile app
Click to expand...
Click to collapse
They say you should flash the framework before installing the installer & modules.
So should I install this after framework but before installer, or after framework & installer?
mangoman said:
yes, strange. At first on eragon it worked with reboots, but after a few of them not so much. Then soft reboots seemed to do the trick.
Right now got amplify working. This time did not enable it in xposed first, but rather ran the app then enabled it in xposed when it asked.
Click to expand...
Click to collapse
Hi.
Can you give the new version 0.7 a shot?
I had issues if the phone shut down completely. At this point i had also no running xposed anymore.
Fixed this.
Now i can reboot also out of xposed installer.
Greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app
arlrb said:
They say you should flash the framework before installing the installer & modules.
So should I install this after framework but before installer, or after framework & installer?
Click to expand...
Click to collapse
Hi.
This order:
wipe
install rom
install supersu
install xposed franework
install mod
boot
install xposed installer
install modules
activate them
restart phone
greetings
vsrookie
Sent from my P9000 using XDA-Developers mobile app
Hey guys,
I'm having some trouble trying to install some audio mods on my OP3 which is currently running RR with Blu_Spark as Kernel, but I had tried pretty much all the audio mod I'm going to mention on stocks ROM and Kernel
So, the only one that I can make work is V4A, whenever I try to install either XTREMEMusic, DivineBeats or BioHazard I get nothing, like I flash the mod and no files are added or If they are (only in stock ROM) they won't work at all
I don't get any error on TWRP, bootloop, sound error ... just it won't work
What is strange is that FreedomOS actually have DivineBeats preinstalled
Can you guys tell If I'm doing something wrong, it's a bug or I'll have to stick to V4A?
im using A.R.I.S.E. audio mod. its working perfect with freedom os
It´s because of the systemless root method for oxygen os. At the other threads there are all described with a system root. This is not possible for oxygen os atm and thats the reason why no sound mod will work with it. You have to switch to a custom rom to get it working.
I´ll wait for cm13 or cm13.1 for our OP3 to get it working. Hopefully
Edit:
Hmm i have to correct me. This shouldn´t be the reason. I´ve seen that the FreedomOS has systemless root too. So ill get along with you and your question why doesn´t any sound mod work with OxygenOS lately?
Crazy_Oni said:
It´s because of the systemless root method for oxygen os. At the other threads there are all described with a system root. This is not possible for oxygen os atm and thats the reason why no sound mod will work with it. You have to switch to a custom rom to get it working.
I´ll wait for cm13 or cm13.1 for our OP3 to get it working. Hopefully
Edit:
Hmm i have to correct me. This shouldn´t be the reason. I´ve seen that the FreedomOS has systemless root too. So ill get along with you and your question why doesn´t any sound mod work with OxygenOS lately?
Click to expand...
Click to collapse
audio mods dont work because of a file (dont know the exact name) which is present in our phone in OOS. special mods which are made specificaly for our device like ARISE OP3 edition works perfectly. other audio mods which deletes or modifies this file will not work.
mkr2511 said:
audio mods dont work because of a file (dont know the exact name) which is present in our phone in OOS. special mods which are made specificaly for our device like ARISE OP3 edition works perfectly. other audio mods which deletes or modifies this file will not work.
Click to expand...
Click to collapse
The thing is, I'm currently using Ressurection Remix which is based on CM13, Why I cannot install them?
Does it actually have something to do with Systemless Root?
So, I'm going to try A.R.I.S.E. and see how it goes, Thanks for the reply guys
Asiier said:
The thing is, I'm currently using Ressurection Remix which is based on CM13, Why I cannot install them?
Does it actually have something to do with Systemless Root?
So, I'm going to try A.R.I.S.E. and see how it goes, Thanks for the reply guys
Click to expand...
Click to collapse
in RR rom even latest special edition Leviticus™ Maxx™ Ice™(ARISE) is confirmed working
mkr2511 said:
in RR rom even latest special edition Leviticus™ Maxx™ Ice™(ARISE) is confirmed working
Click to expand...
Click to collapse
Have you a link please?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Schrotty35 said:
Have you a link please?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
ARISE Leviticus™ Maxx™ Ice™ https://www.androidfilehost.com/?fid=24591023225178731
mkr2511 said:
ARISE Leviticus™ Maxx™ Ice™ https://www.androidfilehost.com/?fid=24591023225178731
Click to expand...
Click to collapse
Working thank you.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
I got divine beats working really well (it's viper + atmos) http://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
I couldn't get stock viper4A working even with permissive at first, but divine made it work.
I can confirm that A.R.I.S.E. works perfectly with my current setup
I didn't hear about it but is a really good audio mod
Asiier said:
Hey guys,
I'm having some trouble trying to install some audio mods on my OP3 which is currently running RR with Blu_Spark as Kernel, but I had tried pretty much all the audio mod I'm going to mention on stocks ROM and Kernel
So, the only one that I can make work is V4A, whenever I try to install either XTREMEMusic,DivineBeats or BioHazard I get nothing, like I flash the mod and no files are added or If they are (only in stock ROM) they won't work at all
I don't get any error on TWRP, bootloop, sound error ... just it won't work
What is strange is that FreedomOS actually have DivineBeats preinstalled
Can you guys tell If I'm doing something wrong, it's a bug or I'll have to stick to V4A?
Click to expand...
Click to collapse
??*????system??????
I flashed the purenexus rom with elemental X kernel and a modified version of magisk 11.6 that was made for roms on the pixel. I was wondering if there was an update to this so I can upgrade to 12.0
I flashed v12 which I downloaded from this post
https://forum.xda-developers.com/pixel/how-to/magisk-pixel-t3573845/post72045390#post72045390
Everything's working just fine (May PN + Elemental 1.11).
yeah me too. works great, very good combo
Here's the direct link to Magisk-v12.0-Pixel.zip: https://drive.google.com/file/d/0B1xZ4VKT4JKZUFhVUlk0enhBVFk/view
JimSmith94 said:
Here's the direct link to Magisk-v12.0-Pixel.zip: https://drive.google.com/file/d/0B1xZ4VKT4JKZUFhVUlk0enhBVFk/view
Click to expand...
Click to collapse
Has anyone been able to install this successfully? 11.6 works great, 12.0 after multiple attempts results in no root.
IlyaKol said:
Has anyone been able to install this successfully? 11.6 works great, 12.0 after multiple attempts results in no root.
Click to expand...
Click to collapse
I'm not sure it works, I'm getting a message saying functionality greatly limited
Bogega said:
I flashed v12 which I downloaded from this post
https://forum.xda-developers.com/pixel/how-to/magisk-pixel-t3573845/post72045390#post72045390
Everything's working just fine (May PN + Elemental 1.11).
Click to expand...
Click to collapse
This didn't work for me for some reason, getting this https://imgur.com/a/rN4zi
tryfont said:
This didn't work for me for some reason, getting this https://imgur.com/a/rN4zi
Click to expand...
Click to collapse
Try going to apk mirror and installing the latest magisk manager. Also make sure NOT to enable BusyBox in it.
pcriz said:
Try going to apk mirror and installing the latest magisk manager. Also make sure NOT to enable BusyBox in it.
Click to expand...
Click to collapse
I had the latest (4.3.3) and still no dice. Magisk-12.0-Pixel doesn't work on my Pixel.
11.6 + Magisk Manager 4.3.3 works beautifully.
IlyaKol said:
I had the latest (4.3.3) and still no dice. Magisk-12.0-Pixel doesn't work on my Pixel.
11.6 + Magisk Manager 4.3.3 works beautifully.
Click to expand...
Click to collapse
I didn't quote you because your issue sounds like you need to wipe out the 11.6 folders and and reinstall 12. It's a different issue. I don't have a link but c_goodwin details how to do it in the RR thread.
do you have to run purenexus or can it run on stock?
pcriz said:
I didn't quote you because your issue sounds like you need to wipe out the 11.6 folders and and reinstall 12. It's a different issue. I don't have a link but c_goodwin details how to do it in the RR thread.
Click to expand...
Click to collapse
Fair enough; that was it. I ran the uninstaller as part of my May OTA/April BL flash and it updated to 12.0 successfully and am rooted. Thanks!
I'm running the May update of PureNexus with Magisk 12.0. Have root via MagisSU with root hide and busy box enabled and all is working well. Even pass safety net check.
how
mostyle said:
I'm running the May update of PureNexus with Magisk 12.0. Have root via MagisSU with root hide and busy box enabled and all is working well. Even pass safety net check.
Click to expand...
Click to collapse
I cant get 12.0 to work on my Pixel XL but i have 11.6+4.33 manager installed and works great. i tried many times to get 12.0 to work i even did a full restore to factory and then flased my Custom ROM (Pure Nexus) and then did the full install of 12.0 following the directions and still says no root limited access. but gone back to 11.6+4.33 no problems at all
how did you do the install of 12.0 and the 4.33 manager if you could give the steps please.
A modified xposed installer and framework for nougat is now available thanks to the Purify os team and rovo
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
Follow the link above.
1. Make backups, twrp/titanium
2. Install the modified xposed installer first, must be done first!
https://forum.xda-developers.com/devdb/project/?id=13191#downloads
Use the top one on the list it may get updated
3. Next download the modified xposed framework from Purify here
http://fastkit.org/xposed/
Follow the links.... SDK24 for nougat 7.0..... Then download the xposed version 87 model... Flash from twrp
Again make sure you fully back up, it all went fine for me, but sometimes these things don't go right.
Plenty of posts in the linked forum but a bit of a jumble as usual, all with varied results, but the above will work for us.
Not sure how many modules are usable yet, I have one working so I know it does work.
Which are you using, and what would you like to use?
undrwater said:
Which are you using, and what would you like to use?
Click to expand...
Click to collapse
Status bar sleep.. Working
Status bar download progress.... Working (mostly)
Status bar cpu temp.. Not working
Status bar cpu frequency.. Not working
Any of the status bar theming such as wanams xtouchwiz would be good
Also xinternalsd was useful but not working
Can you change aspect ratio yet?
blaze82 said:
Can you change aspect ratio yet?
Click to expand...
Click to collapse
Not something I would normally do, is there a particular module you use for that?
It's been such a long time since I came across this, being able to adjust screen ratio and dpi on a per app basis. No real reason to now but with the 4:3 ratio on this tab, it'll be nice.
Also, been a while since I've used xbosed
does not work for me.. i get a recovery-boot loop and it does not start the system
Ch3ck3rM0n said:
does not work for me.. i get a recovery-boot loop and it does not start the system
Click to expand...
Click to collapse
I have been using it without problem for a while, but the versions used are crucial to success, I couldn't get the magisk systemless to work. Try going back to the beginning and make sure each download is correct, the method in the first post will work.
hmm.. but i need magisk :-/
Ch3ck3rM0n said:
hmm.. but i need magisk :-/
Click to expand...
Click to collapse
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
rorymc928 said:
Ok, it may be possible for it to work, I didn't persist with it, what is the benefit with magisk for you?
Click to expand...
Click to collapse
Get it work with super su but installed OBBonSD does not work (with GTA, KotoR,...). Do you have any idea?
EDIT: Found a solution with http://repo.xposed.info/module/com.pyler.xinternalsd
I have followed the directions exactly and I tried twice to install xposed on my t825 rooted with magisk 14. No luck unfortunately. Has anybody been successful in installing it ??
If yes, could he share the methodology ?
xpil said:
... with magisk 14
Click to expand...
Click to collapse
had the same problem.. remove magisk and install superSU.. xposed do not work with magisk -.-' on this tablet..
Question, how do I remove xposed again?
Can I do it with the installer app, or do I need a special skript? Never used Xposed on Samsung before and I know everything works differently.
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Yam_y said:
Hello,
Your experience : Do you have a "" Tab S3 SM-T825, Nougat 7.0, Root SuperSU "" on which you have installed Xposed.
1- Does Xposed work normally with different modules?
(No Bootloop or tablet block?)
2 - Which version xposed * .zip ?
3 - Which Version XposedInstaller _ *. Apk ?
Thank you
Cordially
Yam_y
Click to expand...
Click to collapse
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
rorymc928 said:
Fairly old thread this, I have a T820, however I've made roms for both variants, the t825 thread is here,
https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t825-tweaked-t3769742
the earlier versions are nougat the latest 3.0 on are oreo both work fine, you'll find instructions in the thread, if changing to oreo you need to flash the oreo bootloader, through odin, if returning to nougat you need to flash the older nougat bootloader as they're not cross compatible.
Xposed works fine on both, xposed installer included after booting, start the xposed installer app and select install it picks the correct version.
Root is by magisk.
Click to expand...
Click to collapse
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Yam_y said:
Hello Rorymc
Thanks for the answer and for the link SM-T825 TWEAKED, but I'm already Root with SuperSU + Dm-Verity with Rom ARA2 Nougat 7.0 and I just have to flash Xposed with TWRP.
So, I think I have to take Xposed.zip and Xposedinstaller APK from rovo89 in pure version without add and unmodified ?
I hope I'm not mistaken .....
Cordially
Yam
Click to expand...
Click to collapse
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
rorymc928 said:
Yes that's correct, just make sure you get the correct versions, if anything goes wrong just restore your backup.
Click to expand...
Click to collapse
Hello,
Thank you. Well understood. I like your precise answers
Cordially
Yam