Related
Okay so after a boot loop because of some mistake when my device was still on 4.1, I installed a new 4.4 room from sammobile. I rooted my device, flashed a custom recovery and when I tried to install bliss rom, it failed. I tried to install vaniraosp but I'm still getting the same results. Logcat fails to generate and an error always shows up. It also says that my device is n511 when in fact it is n5120.
It looks like you flashed a 5110 ROM after going to kitkak.
You may have to repartition and start a clean firmware load again.
gooberdude said:
It looks like you flashed a 5110 ROM after going to kitkak.
You may have to repartition and start a clean firmware load again.
Click to expand...
Click to collapse
Im pretty sure I flashed a 5120 rom. I'm able to use mobile data and in the "about device" it shows 5120
Or he use a wrong recovery.
User_99 said:
Or he use a wrong recovery.
Click to expand...
Click to collapse
Im using cwm. Im having some trouble with philz recovery
Hi, I am in need of assistance. I have a Tab S 10.5 SM-T805 with rom XXU1ANF8
I am struggling to flash firmware for my sm-t805 using odin and stock roms downloaded from sammobile. I have tried various version of the stock roms as well as different versions of odin, but they all have the same result.
The result is either "NAND Write Start! FAIL!!" or "Setup connection.. Can't open the serial(COM) port." The order in which I do things might impact which error I receive, such as attaching the tablet first or selecting the ROM file first in PDA box.
Here is why I am desperate. Since this result was pretty consistent, I flashed TWRP successfully and wiped all the partitions, including the system partition. Now, there is no OS installed. Using TWRP I have attempted the 'Install' method of flashing ROMS, but now my error is exclusively the first type.
I read some of the other threads and attempted any advice relevant posted there. This is sort of relevant to what I am trying to do, but my system partition has been wiped. (http://forum.xda-developers.com/galaxy-tab-s/help/odin-flashes-fail-t3028264), so there is no relevance to enabling USB debugging for disabling reactivation lock. This is a guy who can do what I am trying to do. (http://forum.xda-developers.com/galaxy-tab-s/help/roms-flashing-advice-t805-t3031963)
Please help!
eeekw0 said:
Hi, I am in need of assistance. I have a Tab S 10.5 SM-T805 with rom XXU1ANF8
I am struggling to flash firmware for my sm-t805 using odin and stock roms downloaded from sammobile. I have tried various version of the stock roms as well as different versions of odin, but they all have the same result.
The result is either "NAND Write Start! FAIL!!" or "Setup connection.. Can't open the serial(COM) port." The order in which I do things might impact which error I receive, such as attaching the tablet first or selecting the ROM file first in PDA box.
Here is why I am desperate. Since this result was pretty consistent, I flashed TWRP successfully and wiped all the partitions, including the system partition. Now, there is no OS installed. Using TWRP I have attempted the 'Install' method of flashing ROMS, but now my error is exclusively the first type.
I read some of the other threads and attempted any advice relevant posted there. This is sort of relevant to what I am trying to do, but my system partition has been wiped. (http://forum.xda-developers.com/galaxy-tab-s/help/odin-flashes-fail-t3028264), so there is no relevance to enabling USB debugging for disabling reactivation lock. This is a guy who can do what I am trying to do. (http://forum.xda-developers.com/galaxy-tab-s/help/roms-flashing-advice-t805-t3031963)
Please help!
Click to expand...
Click to collapse
Is activation lock off? That what causes it not to flash. The only thing I can suggest is transferring a custom zip rom and flash it with twrp. Or try another firmware from a different country.
Thanks for your response.
DUHAsianSKILLZ said:
Is activation lock off? That what causes it not to flash. The only thing I can suggest is transferring a custom zip rom and flash it with twrp.
Click to expand...
Click to collapse
It was my observation that this activation lock is off by default on the stock rom. In order to turn this on, you have to register with a Samsung account.
DUHAsianSKILLZ said:
Or try another firmware from a different country.
Click to expand...
Click to collapse
The versions I hav already tried are from different countries as well as from different update dates.
Please help!
Here's lollipop for T805, someone took out a few files which should fix NAND Write. http://forum.xda-developers.com/showthread.php?p=59828324
Have you got the Samsung USB drivers installed? If you don't get the 'added' message when connecting the tab you wont be able to flash anything.
Sent from my SM-T805 using XDA Free mobile app
I am having a very similar problem, except my device is working properly. The only thing is that I can't flash the new Lollipop firmware because of this error.
Does anyone know how to solve it?
Thanks!
vrgimael said:
I am having a very similar problem, except my device is working properly. The only thing is that I can't flash the new Lollipop firmware because of this error.
Does anyone know how to solve it?
Thanks!
Click to expand...
Click to collapse
Try flashing this? http://forum.xda-developers.com/showthread.php?p=59828324 Someone took out the hidden.img and cache imgs and tar it back together. You can take a look at the thread for more info
DUHAsianSKILLZ said:
Try flashing this? http://forum.xda-developers.com/showthread.php?p=59828324 Someone took out the hidden.img and cache imgs and tar it back together. You can take a look at the thread for more info
Click to expand...
Click to collapse
Just tried it. Odin doesn't recognize it as a firmware for some reason. Is there anyway to fix this? Also, what is knox warranty void?
Hi, i have also this problem, Original and the cleared .tar (swisscom) comes with this "fail" information in Odin ...... no plan what that for a problem. I am from Germany and i use a 805 LTE. Wich Odin version is the best for flash 5.0.2 i use 3.10.6 eventuelle is that an problem
meexx said:
Hi, i have also this problem, Original and the cleared .tar (swisscom) comes with this "fail" information in Odin ...... no plan what that for a problem. I am from Germany and i use a 805 LTE. Wich Odin version is the best for flash 5.0.2 i use 3.10.6 eventuelle is that an problem
Click to expand...
Click to collapse
Is reactivation lock off as shown here
This is my odin screen ..... no entris with reactivation. 4.4.2 runs with cf-autoroot and twrp recovery
meexx said:
This is my odin screen ..... no entris with reactivation. 4.4.2 runs with cf-autoroot and twrp recovery
Click to expand...
Click to collapse
Idk then, I guess you got to wait for another firmware that comes to your country
Just flash the Swiss Rom then after it fails, boot into download mode again then Install and boot into twrp.
Twrp will wipe the cache and auto reboot. The device should then boot normally.
Is TWRP 2.8.6.0 chagallwifi ok for this procedur ? and can i flash the original swisscom ? or the cleared .tar without the two files ..... and when i in download mode ... wich kombo can i use for reboot in download mode again
meexx said:
Is TWRP 2.8.6.0 chagallwifi ok for this procedur ? and can i flash the original swisscom ? or the cleared .tar without the two files ..... and when i in download mode ... wich kombo can i use for reboot in download mode again
Click to expand...
Click to collapse
Twrp for chagallwifi should do it. Flash swisscom odin firmware then flash twrp and wipe. Reboot into Download by holding power+volume down+ Home buttons
I have tested this procedure and it dont work for my tab .... i must wait for a no branding rom. It dont boot .... hangs on system.img in odin. Twrp is ok now i cant boot after flash twrp, it stay at samsung logo and no boot .... i have 30 minutes wait. Ok i will wait for a other lolipop rom
meexx said:
I have tested this procedure and it dont work for my tab .... i must wait for a no branding rom. It dont boot .... hangs on system.img in odin. Twrp is ok now i cant boot after flash twrp, it stay at samsung logo and no boot .... i have 30 minutes wait. Ok i will wait for a other lolipop rom
Click to expand...
Click to collapse
There is no branding in the system image. I don't see why it won't flash. Can you post a screenshot of Odin. Also what is your official firmware build number?
German Vodafone firmware is up: http://samsung-updates.com/details/43138/Galaxy_Tab_S_10.5_LTE/SM-T805/VD2/T805XXU1BOCC.html
ashyx said:
Just flash the Swiss Rom then after it fails, boot into download mode again then Install and boot into twrp.
Twrp will wipe the cache and auto reboot. The device should then boot normally.
Click to expand...
Click to collapse
I had the same issue today, when using the UK 5.0.2 ROM. These steps helped and it worked afterwards, thanks!
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Did you follow the instructions to flash TWRP using Odin?
olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear
bump
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?
N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.
N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post
aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.
Not my work but it works now.
How to
Reboot in recovery
Wipe device
Flash Rom and kernel:
Download for rom:
Flash this after:
Reboot
Recommend using twrp 3.0.0.1
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
FingerBlastJ said:
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
Click to expand...
Click to collapse
Kernel fixes hardware issues
and if I'm on note 5 moar rom with patch.... no issue flashing right?
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Blzfrost said:
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Click to expand...
Click to collapse
Just flash Rom and kernel everything will work.
MonkeyAround said:
Just flash Rom and kernel everything will work.
Click to expand...
Click to collapse
Oh I'm setting everything up right now for the flash! I'm so excited. Once I realized you linked to a note 5 Rom most of my questions got answered. My favorite part, the kernel was posted on my bday.
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
FingerBlastJ said:
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
Click to expand...
Click to collapse
Update your TWRP.
https://dl.twrp.me/zenltespr/
yea I tried doing that with Odin and it would freeze mid way. I also tried flashing a twrp update zip file on twrp and that didn't work either.
you think I should flash with flash fire?
bricked my phone by trying to flash newer version of twrp with twrp manager
been trying to flash unbrick tar and pit file to get back up and running but its not working.
any help is much appreciated
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
FingerBlastJ said:
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
Click to expand...
Click to collapse
Have you checked for root with root checker? I have lost root access a few times in the past?
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
FingerBlastJ said:
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
Click to expand...
Click to collapse
Last thing I can think of is when opening TWRP the first time. It asks if you want to make the system 'read only'. Did you select No?
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
FingerBlastJ said:
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
Click to expand...
Click to collapse
Not sure. You can click mount and see what is mounted. I am not sure that will work. I am not sure exactly what you are trying to wipe, but mount the items you are attempting to wipe and make sure the read-only is unchecked.
Try this:
Check to see if oem is checked
Re-root via root tar/odin
twrp 3.0.0.1 from edge files post in general
Backup stock
Wipe
Flash Moar
Don't reboot
Flash skyhigh kernel
Flash xposed(don't have to)
Reboot
Allow it to boot loop a couple time (from sky kernel)
Give 5-10 minutes to boot
I just did it with no issues and I've personally had more luck with 3.0.0.1 than any of the others.
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
FingerBlastJ said:
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
Click to expand...
Click to collapse
Your on Lp bootloader that's your issue.
Download Marshmallow tar from the general post I made for rooting Bpg1.
Flash tar and follow post.
twrp. 3.0.x.x is more for marshmallow. You need to be on 6.0.1 not 5.1.1.
Don't use fireflash on this device.
Fireflash is more for phones with locked bootloaders like Verizon s4 on the of1 update.
Fireflash isn't really up to date with our phone and could easily brick your device.
Stuck at "Patching System Image Unconditionally" when flashing CM12.1 via TWRP
Just got a Note 4, proceeding with the usual root and installation CyanogenMod ASAP
Everything was going smoothly until the actual flashing of CyanogenMod, whenever I try to flash it, it just gets stuck on "patching system image unconditionally" and doesn't progress beyond that point
Steps I've taken so far:
1) unboxed phone, was running Android 6.0 (I think, maybe 6.0.1)
2) Rooted with Chainfire's Auto Root
3) Flashed TWRP 3.0.2-0 via Odin 3.09 as per TWRP's instructions
4) Ensured that I could boot both to the stock ROM and TWRP
5) Copied cm12.1 and gapps to Note 4's internal storage (sd card hasn't come in yet, normally I put it onto sd card)
6) Did default factory wipe from TWRP
7) Attempted to flash cm12.1, ran into issue
I didn't make a backup of the stock ROM so now the phone has a recovery but no actual OS, as I had to pull the battery out to get it to do anything beyond being stuck at the patching system image step
I'm redownloading cm12.1 in case maybe there was a problem with the .zip itself, I know it's bad practice but I never check md5 sums
I've found other threads that suggested flashing the stock ROM for some reason, but they were for other phones and I'm not sure if it's related to the Note 4.
I've seen some mention of the bootloader being locked, but I don't know how to tell if the bootloader is locked or not. I see the same exact boot screen that I saw with my Note 3, S4, S3, etc. Could the issue be the bootloader?
I've also found this thread, but I can't get TWRP to mount in Windows, it keeps saying the driver failed to install. MTP transfers worked fine with the stock ROM was still there, but for some reason it doesn't work with the Mount option in TWRP. I'm downloading the Android SDK so I can try using adb
If anyone else has run into this, can you advise me on what to do from here?
EDIT: Nevermind, fixed it. Changed system partition's filesystem to F2FS via TWRP, and this allowed CM and gapps to flash with no issue. Now booted into CM But hopefully this will be helpful if anyone else has this issue
EDIT2: Buuuuut now the WiFi's not working. It just gets stuck at "turn on WiFi" but nothing actually turns on, and the on/off button for WiFi in settings is grayed out. IT NEVER ENDS
CyanogenMod Thread
Reddit Thread
EDIT3:
WiFi and Settings Issue seems to be resolved
I think the problem had something to do with the baseband version
As per Trex's post (http://forum.xda-developers.com/showpost.php?p=69520362&postcount=2), I had to revert back to the OK1 baseband
Now everything seems to work fine
As for TWRP not working and just going to a black screen, I redownloaded it from the TWRP website and it worked fine
So now both TWRP and CM are installed and working, WiFi works, and Settings don't crash.
Now I've encountered an issue where the camera doesn't focus, and I'm wondering if there's still some plastic film on the camera lens, but I've been picking at it and nothing is coming off and I'm afraid of damaging the plastic if I keep trying...
AbuFiraas said:
Just got a Note 4, proceeding with the usual root and installation CyanogenMod ASAP
Everything was going smoothly until the actual flashing of CyanogenMod, whenever I try to flash it, it just gets stuck on "patching system image unconditionally" and doesn't progress beyond that point
Steps I've taken so far:
1) unboxed phone, was running Android 6.0 (I think, maybe 6.0.1)
2) Rooted with Chainfire's Auto Root
3) Flashed TWRP 3.0.2-0 via Odin 3.09 as per TWRP's instructions
4) Ensured that I could boot both to the stock ROM and TWRP
5) Copied cm12.1 and gapps to Note 4's internal storage (sd card hasn't come in yet, normally I put it onto sd card)
6) Did default factory wipe from TWRP
7) Attempted to flash cm12.1, ran into issue
I didn't make a backup of the stock ROM so now the phone has a recovery but no actual OS, as I had to pull the battery out to get it to do anything beyond being stuck at the patching system image step
I'm redownloading cm12.1 in case maybe there was a problem with the .zip itself, I know it's bad practice but I never check md5 sums
I've found other threads that suggested flashing the stock ROM for some reason, but they were for other phones and I'm not sure if it's related to the Note 4.
I've seen some mention of the bootloader being locked, but I don't know how to tell if the bootloader is locked or not. I see the same exact boot screen that I saw with my Note 3, S4, S3, etc. Could the issue be the bootloader?
I've also found this thread, but I can't get TWRP to mount in Windows, it keeps saying the driver failed to install. MTP transfers worked fine with the stock ROM was still there, but for some reason it doesn't work with the Mount option in TWRP. I'm downloading the Android SDK so I can try using adb
If anyone else has run into this, can you advise me on what to do from here?
EDIT: Nevermind, fixed it. Changed system partition's filesystem to F2FS via TWRP, and this allowed CM and gapps to flash with no issue. Now booted into CM But hopefully this will be helpful if anyone else has this issue
EDIT2: Buuuuut now the WiFi's not working. It just gets stuck at "turn on WiFi" but nothing actually turns on, and the on/off button for WiFi in settings is grayed out. IT NEVER ENDS
Click to expand...
Click to collapse
You must flash 5.1.1 ok1 bootloader to get wifi work
I suggest you first flash 5.1.1 firmware in odin
Then flash twrp. Tar file in odin.
Then make full wipe
Flash cm rom + gapps
You will get clean rom install without any errors
Hope this will help
Trex888 said:
You must flash 5.1.1 ok1 bootloader to get wifi work
I suggest you first flash 5.1.1 firmware in odin
Then flash twrp. Tar file in odin.
Then make full wipe
Flash cm rom + gapps
You will get clean rom install without any errors
Hope this will help
Click to expand...
Click to collapse
Okay I'll give that a shot. Are "5.11 ok1 bootloader" and "5.1.1 firmware" the same thing? And do you know where I can find it/them?
Just flashed OK1 via Odin via this thread, but it's just boot looping over and over
EDIT: Did a simple factory wipe and it's working fine now. Currently running unrooted Stock 5.1.1, Baseband N910PVPS4COK1. So I'm basically starting from the beginning, whereas before it was on 6.0 but now it's 5.1.1
Am now rooted but I can't get TWRP installed, I flash it and try to boot to recovery but it just boots to a black screen
Issue seems to be resolved, edited original post
AbuFiraas said:
Okay I'll give that a shot. Are "5.11 ok1 bootloader" and "5.1.1 firmware" the same thing? And do you know where I can find it/them?
Click to expand...
Click to collapse
Go to download mode and check exact model number
Tell me model number and i give you links for bootloader and firmware
Trex888 said:
Go to download mode and check exact model number
Tell me model number and i give you links for bootloader and firmware
Click to expand...
Click to collapse
It's working now, I found another post that had all the various stock firmwares on there. Now the issue I'm having is that my camera doesn't focus at all, but I don't know if it's a hardware or software issue. I never checked the camera before rooting the first time. Gonna try going back to unrooted stock again but if that doesn't change anything, I might have to take it to a Sprint store and get a replacement. Hopefully they don't notice the KNOX trip... lol