Develop Bugs

[Q&A] [OTA] ENDEAVOR_U_JB_50_S_hTC_Asia_India_4.19.720.1-3.14.720.24 Revert to Stock

[Q&A] [OTA] ENDEAVOR_U_JB_50_S_hTC_Asia_India_4.19.720.1-3.14.720.24 Revert to Stock
Q&A for [OTA] ENDEAVOR_U_JB_50_S_hTC_Asia_India_4.19.720.1-3.14.720.24 Revert to Stock 4.2.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OTA] ENDEAVOR_U_JB_50_S_hTC_Asia_India_4.19.720.1-3.14.720.24 Revert to Stock 4.2.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Sisqo said:
via bootloader you flash the firmware.zip inside ota.zip
Click to expand...
Click to collapse
i have htc one x international with hboot 1.73 already and i tried to install ota update.zip but its giving error (status 6)
details
version: 0.5a
version-bootloader: 1.73.0000
version-baseband: 5.1204.167.3
version-cpld: None
version-microp: None
version-main: 4.19.720.2
serialno: SH29FW105091
imei: 353995055825339
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: HTC__038
battery-status: low
battery-voltage: 3604mV
devpower: 23
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
plzzz helppppppp

imstyler said:
i have htc one x international with hboot 1.73 already and i tried to install ota update.zip but its giving error (status 6)
details
version: 0.5a
version-bootloader: 1.73.0000
version-baseband: 5.1204.167.3
version-cpld: None
version-microp: None
version-main: 4.19.720.2
serialno: SH29FW105091
imei: 353995055825339
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: HTC__038
battery-status: low
battery-voltage: 3604mV
devpower: 23
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
plzzz helppppppp
Click to expand...
Click to collapse
Yes it will give error for the first time u have to do that again
Also u need to be completely stock with unrooted firmware and no modifications
Also relock the boatloader and show me the results
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the latest ota installed on my device with tons of bug fixes
They fixed battery issues previously which I've encountered a lot
Also they fixed security updates for
Sslv3 and heart bleed bug fixes
Hope u will find a way of doin the ota..
Regards

can you provide me nanroid backup of your rom (means 4.19.720.3 )

Yes I've also got that update
And hell yeah they fixed battery issues and includes latest security updates
I've the nandroid but it's crossing 1.5+ gb

Please can someone provide the nandroid backup of 4.19.720.3. My phone is softbricked.

[email protected] said:
Please can someone provide the nandroid backup of 4.19.720.3. My phone is softbricked.
Click to expand...
Click to collapse
it will be good to quote somebody like @kantry123 can you help on this guy

kantry123 said:
Yes I've also got that update
And hell yeah they fixed battery issues and includes latest security updates
I've the nandroid but it's crossing 1.5+ gb
Click to expand...
Click to collapse
Is it possible for you to upload the nandroid backup on your google drive?

htc 816 a5_dug stuck on fastboot mode

hi proffesionals...
i have one HTC 816 A5_dug...stuck on fastboot mode after ota update
here is the some bootloader info
***locked***
A5_dug pvt ship s-off
cid-11111111
hboot-3.18.0.0000
radio-invalid_ver_info
opnedsp-invalid_ver_info
os-1.10.1403.1
emmc-boot 1536mb
jul 7 2014 18:22:39.0
and here is fastboot getvar all info
INFOversion: 0.5
INFOversion-bootloader: 3.18.0.0000
INFOversion-baseband: INVALID_VER_INFO
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.10.1403.1
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: HC48FWW02779
INFOimei: 352246068814147
INFOimei2: 352246068814154
INFOmeid: 00000000000000
INFOproduct: a5_dug
INFOplatform: hTCBmsm8226
INFOmodelid: 0P9C70000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: f7b2c71e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
i want to alive this phone...cant able to unlock bootloader with htc dev....tokern.bin flashed but nothing happend on screen..recovery also cant flash..not going to recovery or factory reset.
i m trying to flash with sd card but i m getting os version error.. like this...
bootloader updating failed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so i need radio version 1.10.1403.1 version file...
i tried with many roms from ir file and download some all other varient file aswell but getting same errot..
i think above radio version radio version 1.10.1403.1 file can helpful...or any other trick or ideas...
many thanks in advance
or any trick to realvie this phone...

You're Super CID and S-off, so I wouldn't trust that OS version. what was your original ROM version and MID out of the box?
it seems only the right RUU can help you. and the wrong one may Hard Brick your device

seekfind said:
You're Super CID and S-off, so I wouldn't trust that OS version. what was your original ROM version and MID out of the box?
it seems only the right RUU can help you. and the wrong one may Hard Brick your device
Click to expand...
Click to collapse
thanks for quick reply..
no idea about original rom..its cusotmer phone...but i thinks its chinese varients..coz in back steaker there is something in chiines lagnguage...
can u plz share the ruu fille if you have any..i cant able to find any rom...
thanks

Bro you will find original RUU here its for A5-DUG ihave the same one middle east edition (Egypt)
http://mobilefileserver.com/category.aspx?get=38588
i can't download it
the name of the file
0P9CIMG_A5_DUG_K442_DESIRE_SENSE60_MR_HTCCN_CHS_CU_2.06.1402.2_Radio_1.13.3230.19.29_13.18.3230.00D_F_release_395406_combined_signed_2_4
hope it work with you

dont have any passord for this site..its paid site..do you have any other link for this ruu...plz share with me if any body have ruu for this model

check around in the forum and see if the Chinese variant is indeed A5-DUG. it's possible that it has originally been another variant and flashing the A5-dug has caused the soft brick
my guess is your original variant might be A5-DWG and this file is relevant. but ask around more and by all means, proceed at your own risk.

no its a5_dug...i tried with a5_dwg file...invalid devie id got errot...i thinks radio version invalid must be issue...but how to resolve this problem.please help experts...
many thanks in advance..

seekfind said:
check around in the forum and see if the Chinese variant is indeed A5-DUG. it's possible that it has originally been another variant and flashing the A5-dug has caused the soft brick
my guess is your original variant might be A5-DWG and this file is relevant. but ask around more and by all means, proceed at your own risk.
Click to expand...
Click to collapse
no its not a5_dwg...i have tried a5_dwg firmware aswell with sd card update...and i m getting error on bootloader updating failed...
i think a5 _dug RUU can fix this problem ..
if any body have plz share RUU link...
br ALI

Nexus 5X QFuse?

In light of the QFuse discovery in the 6P, anyone know if the 5X has it?
https://www.reddit.com/r/Android/comments/3phaw6/nexus_6p_has_a_hardware_fuse_that_blows/

RoninRyan said:
In light of the QFuse discovery in the 6P, anyone know if the 5X has it?
https://www.reddit.com/r/Android/comments/3phaw6/nexus_6p_has_a_hardware_fuse_that_blows/
Click to expand...
Click to collapse
They are both based on Qualcomm chip's it is very likely that both have QFuse in them.

I suppose so, but did the 805 in the Nexus 6 have it? What about the LG G4 since it has the came cpu as the 5x?

RoninRyan said:
I suppose so, but did the 805 in the Nexus 6 have it? What about the LG G4 since it has the came cpu as the 5x?
Click to expand...
Click to collapse
I can't verify about the 805 in the Nexus 6, but the LG G4 does based on what RC/RD autoprime mentioned about it here.

shimp208 said:
I can't verify about the 805 in the Nexus 6, but the LG G4 does based on what RC/RD autoprime mentioned about it here.
Click to expand...
Click to collapse
I see. Thank you for the info.
I guess this means we can't unlock the bootloader without possibly voiding warranty or lowering resell value.

I'd like to see them try voiding a warranty for a hardware issue due to unlocking a bootloader.

I see no mention of this qFuse stuff on the bootloader/fastboot screen on my 5x?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Doesn't matter to me. Unlocking the bootloader was the first thing I did when I got the phone. My bootloader shows the same thing as above except that DEVICE STATE is unlocked. And red. And there's a stupid security warning that Google built into it that displays on every boot to remind you that your phone is no longer secure. Damn it's annoying.

randman2011 said:
Doesn't matter to me. Unlocking the bootloader was the first thing I did when I got the phone. My bootloader shows the same thing as above except that DEVICE STATE is unlocked. And red. And there's a stupid security warning that Google built into it that displays on every boot to remind you that your phone is no longer secure. Damn it's annoying.
Click to expand...
Click to collapse
Maybe that's a boot image thing rather than the bootloader? (I hope so)
My N5X has arrived and I can not see the qfuse in the bootloader either, and without knowing what to type in fastboot, we won't know if it does have one unless someone finds evidence.
To be fair, I had a Nexus 5 that I RMA'd for a hardware fault with the "has been unlocked" flag still set, and they repaired it for free...
---------- Post added at 03:35 PM ---------- Previous post was at 03:34 PM ----------
Wait, getvar all shows this:
(bootloader) product: bullhead
(bootloader) off-mode-charge: 1
(bootloader) max-download-size: 0x20000000
(bootloader) battery-soc-ok: yes
(bootloader) battery-voltage: 4095mV
(bootloader) version-hardware: rev_1.0
(bootloader) version-baseband: M8994F-2.6.22.0.56
(bootloader) version-bootloader: BHZ10i
(bootloader) variant: bullhead LGH791 32GB
(bootloader) serialno: -snip-
(bootloader) kernel: lk
(bootloader) secure-boot: yes
(bootloader) partition-type:bootloader: emmc
(bootloader) partition-size:bootloader: 0xa80000
(bootloader) partition-type:boot: emmc
(bootloader) partition-size:boot: 0x2000000
(bootloader) partition-type:recovery: emmc
(bootloader) partition-size:recovery: 0x2000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:system: 0xc0000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:userdata: 0x65a3fb800
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:cache: 0x6000000
(bootloader) partition-type:vendor: ext4
(bootloader) partition-size:vendor: 0xf800000
(bootloader) unlocked: no
We need someone with a 6P to test if there's any flag for qfuse in their getvar all, see if there is actually one in the 5X

Is there like anything unsafe about this besides voiding the warranty?

HTC ONE M8 Hong Kong Marshmallow OTA fingerprint error

Hello all
So i want Marshmallow on my phone, I get the notification that the update is available.
My phone is as follows:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.708.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B63000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I flashed a stock recovery img to get the OTA updates like in the past but this time for some reason i get the red triangle during installation and the error message says:
Package expects build fingerprint of htc/htc_asia_hk.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
can anyone help??? Ive tried to factory reset, tried to go back to earlier backups but no luck.
Thanks

I think this error is usually due to wrong stock recovery.
What stock recovery did you flash?

redpoint73 said:
I think this error is usually due to wrong stock recovery.
What stock recovery did you flash?
Click to expand...
Click to collapse
Hi im using the one i used in the past which is stock-recovery-1.60.708.2-recovery.img. I followed guide where it said that my cid htc 622 accepted this recovery. Im going nuts!!!

dstyle75 said:
Hi im using the one i used in the past which is stock-recovery-1.60.708.2-recovery.img. I followed guide where it said that my cid htc 622 accepted this recovery. Im going nuts!!!
Click to expand...
Click to collapse
That recovery version is way too old. Look for stock recovery 4.18.708.12

redpoint73 said:
That recovery version is way too old. Look for stock recovery 4.18.708.12
Click to expand...
Click to collapse
ok im DL 4.18.708.12_ckpv5.zip BTW how do i flash this in mac? Through adb fastboot? Can i flash a .zip file? I always used the img
i found a 4.18.708.12_recovery.img let me try

redpoint73 said:
That recovery version is way too old. Look for stock recovery 4.18.708.12
Click to expand...
Click to collapse
ok it seems like it worked....however i get a "Unfortunately, the process android.process.acore has stopped” error.....

dstyle75 said:
ok it seems like it worked....however i get a "Unfortunately, the process android.process.acore has stopped” error.....
Click to expand...
Click to collapse
Had to reset it but now its on Android Version 6.0
thanks a lot!!!

Htc m8 hong kong
Am using HTC m8( Hong Kong) and on build 4.18.708.12 with stock recovery,locked bootloader and s-off. Could you please give me the link to the marshmallow Rom zip to flash my phone. Thank you.

Help going back to orginal HTC one m8 ROM

Greetings!,
I'm an iPhone user but I broke my phone recently now I'm using my other [Android Phone] HTC M8 One, which I have used for some time and I needed to root it once so I installed a different ROM and rooted the phone.
I dont have a backup.
Now I'm trying to go back to the original phone ROM as the battery is draining real quick with the current ROM.
I have TWRP installed.
my cidnum:htc_j15
CURRENT ROM : ANDROID REVOLOUTION HD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope that someone can guide me with steps as I'm not experienced with Android.

riskyswagger said:
Greetings!,
I'm an iPhone user but I broke my phone recently now I'm using my other [Android Phone] HTC M8 One, which I have used for some time and I needed to root it once so I installed a different ROM and rooted the phone.
I dont have a backup.
Now I'm trying to go back to the original phone ROM as the battery is draining real quick with the current ROM.
I have TWRP installed.
my cidnum:htc_j15
CURRENT ROM : ANDROID REVOLOUTION HD
I hope that someone can guide me with steps as I'm not experienced with Android.
Click to expand...
Click to collapse
more information needed
post the result of fastboot getvar all ( after removing serialno and imei )
or reboot to bootloader and post everything written there

ahmed.ismael said:
more information needed
post the result of fastboot getvar all ( after removing serialno and imei )
or reboot to bootloader and post everything written there
Click to expand...
Click to collapse
Thanks for your reply,
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxx
(bootloader) imei: xxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

riskyswagger said:
Thanks for your reply,
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxx
(bootloader) imei: xxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Follow this post instruction and you will be on full stock marshmallow
Follow all the post steps
Sent from my HTC M8 using XDA Labs

ahmed.ismael said:
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Follow this post instruction and you will be on full stock marshmallow
Follow all the post steps
Sent from my HTC M8 using XDA Labs
Click to expand...
Click to collapse
I tried the solution above ...Now I have loop reboot problem...

riskyswagger said:
I tried the solution above ...Now I have loop reboot problem...
Click to expand...
Click to collapse
what "loop reboot" ? can you be more detailed ?
Sent from my HTC M8 using XDA Labs

ahmed.ismael said:
what "loop reboot" ? can you be more detailed ?
Sent from my HTC M8 using XDA Labs
Click to expand...
Click to collapse
The phone would randomly reboot itself at some point without even installing any apps yet....
now I installed this ROM : https://forum.xda-developers.com/htc-one-m8/development/rom-resurrection-remix-v5-8-0-t3507210
still the same problem is happening...
I tried clearing cache and other stuff( Format )
Didn't help.

riskyswagger said:
The phone would randomly reboot itself at some point without even installing any apps yet....
now I installed this ROM : https://forum.xda-developers.com/htc-one-m8/development/rom-resurrection-remix-v5-8-0-t3507210
still the same problem is happening...
I tried clearing cache and other stuff( Format )
Didn't help.
Click to expand...
Click to collapse
After flashing the RUU you have this issue ?
It's not a good sign as it indicate to a hardware issue
My suggestion is to flash the RUU again and if it still looping then there is nothing we can do ( sorry about that )
Sent from my HTC M8 using XDA Labs