Installed on 3 different Roms (Dark Unicorn (unofficial), Bliss Rom and Paranoid. All 3 Roms boot fine, but when I install Gapps I get the " Unfortunately Setup Wizard has stopped" or with the Paranoid install I got the "com.google.process.gapps has stopped" error.
This the 6-30 and 6-29 versions.
Has anyone run into this issue and if so, were you able to fix it? If so, how?!?!
You must flash the Gapps and the ROM at THE SAME TIME to make it work
it worked, thank you
Related
Hi,
i just have a question. I flashed the PA oppo find 7 rom on phone. all is working fine.
the only small error is when ever i restart the phone i get the attached error. any idea what is causing it?
Got this on the Find 7a with 4.45. Error also occurs after clean flash with latest gapps. I think it started with 4.45 didn't remember this happening on 4.44
.
Flash a different gapps?
#stayparanoid
Always used micro modular gapps as recommended for the find7a. Which gapps should we try in your opinion?
gapps
i tried other gapps as well, but still having the same problem.
maybe i will try to flash rom from other source.
Hi everyone,
Today I installed the new CM12 nightlies, after rebooting my HTC one m8 it showed me a popup message that google play services stopped working. I also couldnt launch particular apps. So after looking for a solution I tried reinstalling Gapps hoping this would solve the problem.
I downloaded the minimal Gapps ZIP file and flashed it using TWRP recovery, after I wiped the cache and dalvik cache. Once rebooted I started to get the anoying pop up notifications '' Gmail stopped working'' and ''youtube stopped working''. These two messages won't go away and makes my phone unusable. I think the reason why these messages keep popping up is because i flashed the minimal version of Gapps so I downloaded the normal version of Gapps on my computer since my phone isnt accesable because of the pop-up notifications that won't go away. What I did next was plug in my phone to my computer and moved Gapps L-3-14-15.zip to my SD card and installed it again. I also wiped the cache and dalvik cache. after I did a reboot and everything seemed fine for the first 20 seconds... It didnt last long. Im still having the same problem as before Gmail and youtube has stopped working. Do any of you know how to fix this without doing a system recovery?
Thanks in advance
HTC one m8
Cyanagonmod 12.1
Rooted
TWRP
S-on (don't know if this is relevant)
Copy important files to computer. Factory reset. Set it up as new device.
ikeny said:
Copy important files to computer. Factory reset. Set it up as new device.
Click to expand...
Click to collapse
To me it sounds like you installed a gapps 5.0 package not a 5.1 package. With the CM Nightly you need to make sure you're using an updated gapps package designed for android 5.1+.
I always use a minimal gapps package but usually CM has a link available on their page. Double check that you're installing a gapps 5.1 package. I am currently running the 5.1 nightlies and they're great thus far... 4/20 and 4/19 are both confirmable as working on my end. Good luck.
To correct Wipe /data /system /cache and dalvik reinstall the nightly and flash a 5.1 gapps package.
jcole20 said:
To me it sounds like you installed a gapps 5.0 package not a 5.1 package. With the CM Nightly you need to make sure you're using an updated gapps package designed for android 5.1+.
I always use a minimal gapps package but usually CM has a link available on their page. Double check that you're installing a gapps 5.1 package. I am currently running the 5.1 nightlies and they're great thus far... 4/20 and 4/19 are both confirmable as working on my end. Good luck.
To correct Wipe /data /system /cache and dalvik reinstall the nightly and flash a 5.1 gapps package.
Click to expand...
Click to collapse
I guess the minimal Gapps package that I first installed wasnt for 5.1
In order to get rid of the pop up notifications I started my phone in safe mode. This worked and I saw there was a new update for cm12.1 after the update finished and I booted up my phone the pop up notification werent there anymore but google play services was also uninstalled. What I did next was installing the newest google play services pack. After it was done I installed the 5.1 Gapps version on my phone and now everything seems working fine again. I did get some notifications that an app such as chrome stopped working but a simple reinstal of the app fixed the problem. Somehow the apps that I moved to my external SD card arent here anymore but im glad I didnt have to do a factory reset.
Thanks for your help
jcole20 said:
To me it sounds like you installed a gapps 5.0 package not a 5.1 package. With the CM Nightly you need to make sure you're using an updated gapps package designed for android 5.1+.
I always use a minimal gapps package but usually CM has a link available on their page. Double check that you're installing a gapps 5.1 package. I am currently running the 5.1 nightlies and they're great thus far... 4/20 and 4/19 are both confirmable as working on my end. Good luck.
To correct Wipe /data /system /cache and dalvik reinstall the nightly and flash a 5.1 gapps package.
Click to expand...
Click to collapse
every time i update my cm12 nightlies it has its own recovery (cyanogen recovery) but my zip files are not working with that recovery. (ex. cmzip.gapps, and kernels). for my device it works on PhilZ touch recovery. so the tendency is i have to flash fastboot boot.img(philz touch)again and again.
using Thunderzap kernel 4.15 im stock on bootloop.
running cm12.1 nightlies (4/20/15)
also gapps not compatible.
decoction said:
every time i update my cm12 nightlies it has its own recovery (cyanogen recovery) but my zip files are not working with that recovery. (ex. cmzip.gapps, and kernels). for my device it works on PhilZ touch recovery. so the tendency is i have to flash fastboot boot.img(philz touch)again and again.
using Thunderzap kernel 4.15 im stock on bootloop.
running cm12.1 nightlies (4/20/15)
also gapps not compatible.
Click to expand...
Click to collapse
I use twrp and I've not had any issues with a cm recovery replacing twrp. On the 420 nightly I don't even see a recovery.img in the cm zip so I'm assuming you're updating via cm itself. I think there's a setting in there to choose to update cm recovery or not.
To flash Phillz recovery you're syntax would be "fastboot flash recovery recoveryimgname.img" the boot.img is your kernel. I'm not sure how many aosp 5.1 kernels the m8 has but I've not really been able to find any so I just use the cm one.
To correct your issues I would flash twrp 2.8.6 via fastboot flash recovery. Wipe everything from recovery (cache data dalvik system) and reinstall. If it was me I'd update cm via zip from now on if it was causing me these issues. Good luck
HTC One (M8) ViperOne + Hypernova
Everything seemed working fine again until 30 min. ago...
I got the notification chrome has stopped working. (Haven't had this message all the morning and chrome worked just fine.)
I restarted my phone and the first thing I noticed was that some of my apps have disapeared from my home screen, they are still in the app tray tho. Also my keyboard input mode has been set back to AOSP while normaly I use Swiftkey keyboard as my standard input. Chrome was still pushing me not working notification so I reinstalled chrome and now it works fine again. Not sure for how many time...
Its kinda anoying but maybe tonights nightlies will solve the problem somehow. If not, do you have any sugestions how to fix this?
jcole20 said:
I use twrp and I've not had any issues with a cm recovery replacing twrp. On the 420 nightly I don't even see a recovery.img in the cm zip so I'm assuming you're updating via cm itself. I think there's a setting in there to choose to update cm recovery or not.
To flash Phillz recovery you're syntax would be "fastboot flash recovery recoveryimgname.img" the boot.img is your kernel. I'm not sure how many aosp 5.1 kernels the m8 has but I've not really been able to find any so I just use the cm one.
To correct your issues I would flash twrp 2.8.6 via fastboot flash recovery. Wipe everything from recovery (cache data dalvik system) and reinstall. If it was me I'd update cm via zip from now on if it was causing me these issues. Good luck
HTC One (M8) ViperOne + Hypernova
Click to expand...
Click to collapse
Thank you for that info. it really helps. by the way i got problems when i updated it to the cm12 4/21/15 update. got this message "trebuchet has stop working" so i decided to use cm resurrection remix.
decoction said:
Thank you for that info. it really helps. by the way i got problems when i updated it to the cm12 4/21/15 update. got this message "trebuchet has stop working" so i decided to use cm resurrection remix.
Click to expand...
Click to collapse
Yeah I mean nightlys merge with code that it's being worked on and may break or fix certain things. Nightly builds may be perfect or they may not even boot. You kind of have to just flash them and see. Cm is very generic coding and depending on your carrier may not have the non open source vendor blobs necessary to make, say, your speakers work properly. It really depends. I don't believe Verizon had released their kernel source for lollipop so sometimes downgrading firmware to known source (ie 4.4.4) may help alleviate connectivity issues with Wi-Fi and things of that sort. Team UBs build and lollipop dream 5.0.2 have been my go tos as of late. The lollipop dream build is the smoothest running cm build I've ever used even on nexus devices. Very well made.
HTC One (M8) ViperOne + Hypernova
After I installed PA & gapps on my phone, and reboot it, it would crash.
Popup messages appears and the most common one is
"Unfortunately, Setup Wizard has stopped"
What can I do to install PA properly? Am I missing something? Please, help.
Also, when I don't install Gapps, no error would appear. Am I just installing the wrong gapps package?
Addtional info that might help:
ROM used: Paranoid Android 5.1 2015-08-22 STABLE
Recovery: TWRP 2.5.0.0
Gapps tried: tk_gapps_modular_nano_5.1.1_20150927, pa_n5120-5.1-20150822, open_gapps-arm-5.1-nano-20151028
Pretty sure PA builds are 5.1 not 5.1.1
Yes, but I already sought to install 5.1 gapps (pico and nano) but still to no avail.. I will still try to find other ways but please if you have any more inputs it would be much appreciated. Thanks
Wipe data.
Install ROM
Install gapps for Android version.
Boot.
I made a thread on reddit but nobody is answering so I'll try my luck here.
Everything is working except gapps when I flash them in dual boot patcher. It flash ROM successfully but then I flash gapps nano version but I get error 70 even though I have plenty of space so I move the ROM and gapps on Data partition and there was no error. So I reboot to Crdroid ROM but there's always this sing that :,, Google play stop working,, and It close everytime I try to open it. I also tried Pico version but with the same result. I installed 6.0 arm version of gapps.
I rooted my phone yesterday fine and made a backup of my oxygen OS (original rom).
I am definitely successfully unlocked and rooted, and TWRP newest version is running.
I have tried so much to get a new rom running correctly I have tried both resurrection remix official and unofficial:
https://forum.xda-developers.com/on...evelopment/op3-3t-resurrection-remix-t3754941
I have also tried official paranoid android, but every time it starts up I get two issues the first is the error saying "android.media has stopped" the more serious being the fact that no matter which rom I flash it always begins force restarting over and over again, I get into the OS fine, have a scroll around and around every 2 mins or so it just force reboots, then it comes back and is fine for 2 mins then same again.
It has happened with the official and unofficial versions of resurrection remix and also happens exactly the same with paranoid android. I have no idea what else to try at this point.
The process I have been using for flashing is this:
1. Boot into TWRP recovery
2. Wipe everything but internal storage.
3. Install my rom.
4. Reboot.
5. Starts up successfully and then falls back into the standard boot loop and the android.media error.
I have also tried it with GAPPS which was throwing some setup wizard has stopped error, so for now I am just attempting to get an actual rom running without constantly restarting.
Any help is massively appreciated, I am tech savvy, hence why this is annoying me even more.
Thanks,
Kieran
Have you tried going back to the latest official Oxygen OS (Stable or OB)?
jeffrey268 said:
Have you tried going back to the latest official Oxygen OS (Stable or OB)?
Click to expand...
Click to collapse
My backup is the original oxygen and this restores fine and works fine just as soon as I try to flash a new rom it just keeps restarting every few minutes, I dont really know what else to try.
Also to add I sometimes see this issue when I attempt to flash certain roms..... 'assert failed: op3.verify_modem("2017-11-16") == 1'
Use the recommended firmware by the rom. Also you can't flash most roms without Gapps.
1. Flash proper firmware
2. Flash the rom
3. Flash Gapps or something similar.
4. Flash any additional kernel (optional).
5. Flash SuperSU or Magisk.
The assert failed littery tells you that you use using the wrong modem // firmware.
my first question which custom Rom you installed every Rom developer say it is stable but only few has been stable as rock . i tried everything but settled with AICP Rom. and then try to use GAPP as ARM64 android 8.1
u have first install Rom and then GAPP then magisk or Superuser anything which u refer
https://forum.xda-developers.com/on...e-development/wip-official-aicp-13-0-t3713637
this is the Rom which i use it . .they are stable and also update it weekly thrice ..
if u like it you can install this ROM