Hello everyone,
I noticed that my HTC 10 (Europe Unlocked FW 1.80) has trouble charging on 1A chargers, the charging LED blink every 5-10 seconds.
It does work fine with a 1.5A charger and the bundled quick charger (2.5A). It did also work fine when attached to the laptop directly.
Did you also experience this behavior?
I have original HTC wall charger 5V-1A and HTC charges without problems on factory cable.
On non complaint, cheap usbA to usb type C cables the led is blinking and not charging.
I have charged my HTC10 on a 1A charger many times and everytime without problem.
Interesting, I am also using an original HTC charger with the bundled cable and I do get the issue.
Are you by any chance also running the 1.80 ROM?
Today I updated to .401, I have EU phone. No charge issues, my phone charges slowly from this 1A charger right now.
fun_key said:
Interesting, I am also using an original HTC charger with the bundled cable and I do get the issue.
Are you by any chance also running the 1.80 ROM?
Click to expand...
Click to collapse
How did you measure the actual current?
How did you establish that the actual output is 1A?
Sent from quite brutal hTc 10 ..
jauhien said:
How did you measure the actual current?
How did you establish that the actual output is 1A?
Sent from quite brutal hTc 10 ..
Click to expand...
Click to collapse
I did simply read what was written on the charger and assumed that it would be correct. I did carry on with my investigations, and the phone charges fine with a lot of charger (including Samsung & apple 1A). It just fail with 3 old HTC ones rated 1A.
Did you tried to move the usb plug in the charger to determine if it is connected properly? Do that and watch if the red led on the phone lights up.
Yes, I did move the charger it does not help.
The red LED is active for about 10 seconds, then it stops, and after 2 seconds it lights again.
But in the end I don't mind - I just use other chargers
@cavist: Out of curiosity, are you on 110W or 230W?
I am on 230V, I have eu spec, original HTC charger from my M7 bundle, I noticed that one of my cables ordered online has something wrong with the connector and I need to move it in the charger to get it working so I thought, maybe the HTC charger wear quite quickly and some connector can not fully connect with the paths.
All my other type C cables are fine with it. I use this charger to charge my M10 over night and the QC3.0 charger to quickly charge on the desktop.
I have been charging my 10 every night on a Samsung original 1A charger + original HTC USB A to C cable. No issues at all.
I recently bought some cheap USB A to C cables, and the phone won't charge unless I pull the USB A end slightly out from the Samsung 1A charger.
But the cheap cable works fine with my other chargers, so I presume it's a mechanical tolerance issue between the Samsung 1A USB A jack & the USB A end of my cheap cable.
chong81 said:
I have been charging my 10 every night on a Samsung original 1A charger + original HTC USB A to C cable. No issues at all.
I recently bought some cheap USB A to C cables, and the phone won't charge unless I pull the USB A end slightly out from the Samsung 1A charger.
But the cheap cable works fine with my other chargers, so I presume it's a mechanical tolerance issue between the Samsung 1A USB A jack & the USB A end of my cheap cable.
Click to expand...
Click to collapse
Same with my HTC charger and certain USBA connectors.
Related
Hello,
I'm trying to find a car charger that will work right with my One. So far I've tried two different 2-USB port car chargers and both 2.1A chargers and I've gotten an error of "Slow Charging" on my one. I've tried various chargers I had from before when I had an iPhone and they are giving me the same warning. Is there a charger that is known to work well with the One?
Thanks,
Tim
Try using a different USB cable as some of them have different pin configurations. I am using http://www.amazon.com/Anker%C2%AE-Output-Simul-Port-Charger-Built-/dp/B0080AWCTY/ref=sr_1_4?ie=UTF8&qid=1373316550&sr=8-4&keywords=anker+car+charger this Anker car charger and I have never got any messages. Although every charger does charge the One slowly. If you leave the screen on and use the phone (like ingress or navigation) the phone looses charge while charging.
Hi, i'm using this one for myself
Two USB ports and charges pretty fast
Also works at home
http://www.amazon.com/Sprint-Vehicle-Battery-Charger-Travel/dp/B0050FDFQQ/ref=pd_sim_sbs_cps_1
I just went through this as well and have solved it by buying the HTC vehicle charger. You can check your phone charging in the car by going into "Settings" and then to "Power". When the phone is plugged in it will indicate charging either by USB (slow) or AC which is faster.
I have several car chargers including 2.1 amp models and every single one would only go to USB charging mode. Another quick way to tell if you're in USB charge mode is that the screen will turn on when you plug in the charge cable. In AC charge mode the screen stays blank when you plug in.
I picked up the HTC single port USB charger online at Amazon for around $10 bucks. Plugged it in with my existing USB cable and boom, AC mode. Model of the charger I believe is C200 (pn 25531) and it comes with a coiled charger cord as well. They also have a dual port charger which is the C300 but I haven't tested that one.
I also feel a little more comfortable using the HTC charger as I know it's tested and sanctioned by HTC. Not that I haven't used a lot of really good in-car USB chargers by other manufacturers but in this case, the HTC charger is doing the job and was inexpensive. Cheers!
Thanks for the info, I'll check it out. I like having two USB ports, but it's pretty rare I charge both my Blackberry and One at the same time so I'll probably just get the single port. I see it on Amazon for less than $6, whereas the dual port is $25!
linedpaper said:
Thanks for the info, I'll check it out. I like having two USB ports, but it's pretty rare I charge both my Blackberry and One at the same time so I'll probably just get the single port. I see it on Amazon for less than $6, whereas the dual port is $25!
Click to expand...
Click to collapse
I'm using that one and i charge my one and an iphone without any issues
darkriff said:
I'm using that one and i charge my one and an iphone without any issues
Click to expand...
Click to collapse
You're using the two port one? I just didn't want to pay so much extra to have a two port charger when I can get the one port for so cheap. Also, I did just discover that while running ARHD GE I don't get the error, so it seems to only be the Sense related error, but either way I ordered the HTC charger from Amazon, thanks!
joudbren said:
I just went through this as well and have solved it by buying the HTC vehicle charger. You can check your phone charging in the car by going into "Settings" and then to "Power". When the phone is plugged in it will indicate charging either by USB (slow) or AC which is faster.
I have several car chargers including 2.1 amp models and every single one would only go to USB charging mode. Another quick way to tell if you're in USB charge mode is that the screen will turn on when you plug in the charge cable. In AC charge mode the screen stays blank when you plug in.
I picked up the HTC single port USB charger online at Amazon for around $10 bucks. Plugged it in with my existing USB cable and boom, AC mode. Model of the charger I believe is C200 (pn 25531) and it comes with a coiled charger cord as well. They also have a dual port charger which is the C300 but I haven't tested that one.
I also feel a little more comfortable using the HTC charger as I know it's tested and sanctioned by HTC. Not that I haven't used a lot of really good in-car USB chargers by other manufacturers but in this case, the HTC charger is doing the job and was inexpensive. Cheers!
Click to expand...
Click to collapse
The official htc one car charger in the htc website is only one works for me. 24.00but worth it.
Sent from my HTC One
these duel USb chargers from just wireless charge 1A per port in AC mode ... can pick them up at walmart or target
http://www.target.com/p/just-wirele...sku=14365620&gclid=CNq_yZzcrbgCFZBAMgodwnkAvw
I use Avantek. This little guy did an excellent job. With its combination of power ports and USB plugs it works perfectly for everything from iPads to radar detector. Charges my phone as fast as my home charger and always gives full charge to my One when I'm using the navigation app. FYI I found it on Amazon.
I buy from Amazon
Only have had my phone for 3 months but I have only used the HTC charger and cable one time. The charger got extremely hot when I charged my phone, since that first time I have used a samsung galaxy tab charger and samsung galaxy tab 6' usb cable. I have a 2.1 amp dual charger from pepboys in my truck. Phone charges quickly and does not overheat or any of the other issues i've heard of on here. I just chalk it up as samsung having good chargers and usb cables.
See my post regarding fast charging for specifics on the electrical damage in a car and the value of having a good charger:
http://forum.xda-developers.com/showthread.php?p=55802702
Is a fast USB car charger harmful?
On that note. Monoprice.com offers great chargers at a great price. Guaranteed to charge at stock speeds. Great internal parts and quality control at near eBay pricing. I've bought many many of their products over the years and never has it once failed in me.
Alternatively, and unpractically, buy stock chargers.
Sent from my One
The best car charger that I've found is from TechMatte. They have a black one and a white one, and I use the black one. It charges pretty quickly, and was only $8 to purchase, which was not bad at all for a high quality charger.
Hello
My htc one m8 charging fast when i use htc usb cable but if i pluged another usb cable it's charing so slow.
Currently i charging with Note 3 charger & original Samsung usb cable
Sorry for my English
-juanito- said:
Hello
My htc one m8 charging fast when i use htc usb cable but if i pluged another usb cable it's charing so slow.
Currently i charging with Note 3 charger & original Samsung usb cable
Sorry for my English
Click to expand...
Click to collapse
It may just be a higher quality USB cable. I bought a monoprice gold plated cable with a ferrite core and it works great!
It got higher ampere, but doesn't note 3 have usb 3.0 charger cable out of the box? anyway, i believe it's a 2.0 amp adapter.
BUT, do you mean just the cable or? because some cables are poor quality, and not delivering all the power to the phone, chinese cables for example does (some cheap ones).
I dont recommend to fast charge if possible, try to charge your phone as much slow as possible (with slow, i dont mean charging from pc, just dont use those fast-charge options and/or high ampere adapters, it could decrease battery capacity, and overheat the phone during charging. I did some experiment with my stock charger with 2.0 amp, and another stock samsung charger which is 1.5amp, and it charged slower, but guess what? my battery somewhat feels like it lasts longer. Maybe i feel.
I heard about wrong quality USB C cables which can damage the phone but what if I use original HTC 10 cable with old powerbank?
Is it safety?
You'll be fine.
Used it today for the first time and it worked just fine.
Should work fine wall/car charger and third party cables are the problem. Tested some of them and met heat issues. The only one working flawless and without any issue, since I received them, are from Aukey. Just in case you want to order some more cables.
Sent from my HTC 10 using XDA Labs
That's complete nonsense, don't listen to sites like Android Central/Phandroid. They clearly don't understand how things work in that regard, so don't worry. I've used many of my USB A-C cables that are compliant from my Nexus 6P via a power bank (4 different ones actually), QC 2.0/3.0 and type-c chargers with 0 issues. Just don't buy a cheap no name charger and cable just like with any phone.
Here's a brief list of the brands of cables/chargers that work fine based on what I've personally used:
Choetech C-C/A-C/QC2.0/3.0/powerbank
Tronsmart C-C/A-C/QC2.0/3.0
EasyACC Powerbank/QC2.0
Incipio Car charger QC 2.0
Samsung QC2.0 wall charger
Google Type-C wall charger
I-Orange A-C/C-C cable
Anker Wall charger
Cable Matters C-C cable
Aukey QC2.0 powerbank
I've used the Anker 10000 mAh QC 3.0 Power Bank with no issues. Charges very fast and reports "Charging Rapidly". I also use the Anker Power Line USB-C to USB 3.0 cable with it.
I have an Anker 13000mAh power bank and I've used both the Anker and HTC type C cables and it seems to charge only when the screen is on. One the screen goes off the charging light goes off, then the screen will turn back on and start charging like I just plugged the charger in. It will do this over and over. I've had no issues with my older Nokia and the stock HTC wall chargers
i have xiaomi power bank which is have different volts with original wall charger volts , does it effect on my phone battery ? its ok if i charge it with this power bank?
Jwtiyar said:
i have xiaomi power bank which is have different volts with original wall charger volts , does it effect on my phone battery ? its ok if i charge it with this power bank?
Click to expand...
Click to collapse
I also use a powerbank having different voltage :
2.1 v and 2.4 v
Both are working fine and the 2.4v port is quicker
So I've now purchased a wall charger and a car charger that both have QC 3.0 and claim to support the HTC 10, but neither of them show the "Charging rapidly" when charging my device. Only when I use the original charger or an external battery with QC 3.0 does it display that. Is it possible that it's still charging using QC 3.0 while charging if it doesn't display the "Charging rapidly" on the lock screen? I really just want a car charger and additional wall charger with multiple ports that will rapidly charge my HTC 10. I'm really sick of buying accessories that do not when they say they support the HTC 10.
These are the accessories I've tried and none of them will display "Charging rapidly":
http://www.amazon.com/Quick-Charge-...&redirect=true&ref_=oh_aui_detailpage_o00_s00
http://www.amazon.com/Charger-Trons...&redirect=true&ref_=oh_aui_detailpage_o03_s00
This battery does display "Charging rapidly":
http://www.amazon.com/Qualcomm-Cert...&redirect=true&ref_=oh_aui_detailpage_o04_s00
Any ideas?
THIS is a good multi port charger I have one and it quick charges and displays on the phone it is. I use this cable on it.
For a car charger I use THIS and it quick charges no problem with THIS cable
I am wondering the same thing... what does a cable or charger need to provide fast charging... I wonder if it's the cables because I got one from amazon and use it with the htc charger that came with the phone and it does not "quick charge," it only does it with the cable it came with. I bought this one:
http://www.amazon.com/Fusion4K-USB-...d=1464288411&sr=8-24&keywords=fusion+4k+cable
PaoloMix09 said:
I am wondering the same thing... what does a cable or charger need to provide fast charging... I wonder if it's the cables because I got one from amazon and use it with the htc charger that came with the phone and it does not "quick charge," it only does it with the cable it came with. I bought this one:
http://www.amazon.com/Fusion4K-USB-...d=1464288411&sr=8-24&keywords=fusion+4k+cable
Click to expand...
Click to collapse
I just made sure they were the latest cables, the ones you linked to are USB 2.0 and 480mbps. while I made sure to get USB 3.1 to USB 3.0 cables and have 5gbps. I know the speeds really don't have much to do with charging say, but I think the generation of cable has a lot to do with it
afuller42 said:
I just made sure they were the latest cables, the ones you linked to are USB 2.0 and 480mbps. while I made sure to get USB 3.1 to USB 3.0 cables and have 5gbps. I know the speeds really don't have much to do with charging say, but I think the generation of cable has a lot to do with it
Click to expand...
Click to collapse
Hmmm.... good point, if someone could confirm this maybe? Does make much more sense, I guess I should've read better. I will just get one of your cables because I just recently bought a QC 3.0 car charger and there's no point in it if it ain't fast charging.
So the Aukey multi-port charger came with a USB-C cable and it claims to support the HTC 10, so it's infuriating that it doesn't work.
I use this wall charger and it shows "charging rapidly" on the screen. I have an older cable with the micro usb connection, so I use this adapter to make the connection to the phone. Combined, they work like a charm.
m_kranzler11 said:
So I've now purchased a wall charger and a car charger that both have QC 3.0 and claim to support the HTC 10, but neither of them show the "Charging rapidly" when charging my device. Only when I use the original charger or an external battery with QC 3.0 does it display that. Is it possible that it's still charging using QC 3.0 while charging if it doesn't display the "Charging rapidly" on the lock screen? I really just want a car charger and additional wall charger with multiple ports that will rapidly charge my HTC 10. I'm really sick of buying accessories that do not when they say they support the HTC 10.
These are the accessories I've tried and none of them will display "Charging rapidly":
http://www.amazon.com/Quick-Charge-...&redirect=true&ref_=oh_aui_detailpage_o00_s00
http://www.amazon.com/Charger-Trons...&redirect=true&ref_=oh_aui_detailpage_o03_s00
This battery does display "Charging rapidly":
http://www.amazon.com/Qualcomm-Cert...&redirect=true&ref_=oh_aui_detailpage_o04_s00
Any ideas?
Click to expand...
Click to collapse
Are you using a USB-C to USB-C cable? those accessories only have quick charging on the USB-C port. If you buy new ones make sure to check what ports support the QC 3.0. Sometimes the only have one port that has the QC and the rest are normal 2 amp ports.
I've just ordered the Aukey 6 port USB Quick Charge 3.0 Wall Charging Station from Amazon UK (link below), so I'll test it once it comes in and post here with the results. One thing I noticed is that the Aukey hub only supports QC3.0 on the USB-C plugs, not the USB2 ports. I'll be using this to charge my HTC 10 and my Pixel C using the USB-C ports and USB-C cables for both devices so I can see if both QC3.0 AND USB-C Rapid Charging works at the same time. The remaining USB2 ports I'll use to plug my Qi charging pads into and my smartwatch charger. Looking forward to not having so many plugs lying around.
https://www.amazon.co.uk/Charger-Te...EFN8/ref=aag_m_pw_dp?ie=UTF8&m=A2UZUMHNJKCOJU
I'll let you all know once it all comes.
Okay, so I just got delivery for all my bits in my previous post. I've made sure both my HTC 10 and my Google Pixel C ran down the battery to 20% on each and plugged them both into the USB-C ports on the Aukey charging station using USB-C to USB-C 3.1 cables, both 3 foot long. I'm not using any of the cables that came with my tablet or phone or the USB-C 2.0 cable that comes with the Aukey charging station, I am using Belkin USB-C to USB-C 3.1 cables.
Using the Belkin USB-C 3.1 cables both my HTC 10 and Pixel C show Charging Rapidly after around 45 seconds on the lock screen with a time remaining counter.
Using the Aukey USB-C 2.0 cable that came with the Aukey charging station I do not get Charging Rapidly at all on my HTC 10, I only get "Charging" and a percentage.
However, I do get Charging Rapidly with time remaining counter on my Pixel C when using the Aukey USB-C 2.0 cable.
Based purely on my own testing, I would make sure you use high quality cables, preferably the 3.1 gen cables and then nothing will be slow. I have no idea why the USB-C 2.0 cable doesn't like to Quick Charge my HTC 10, and I don't have any other gen 2.0 USB-C cables to try out, so sorry about that.
I hope that helps some of you out.
svmpatel said:
Okay, so I just got delivery for all my bits in my previous post. I've made sure both my HTC 10 and my Google Pixel C ran down the battery to 20% on each and plugged them both into the USB-C ports on the Aukey charging station using USB-C to USB-C 3.1 cables, both 3 foot long. I'm not using any of the cables that came with my tablet or phone or the USB-C 2.0 cable that comes with the Aukey charging station, I am using Belkin USB-C to USB-C 3.1 cables.
Using the Belkin USB-C 3.1 cables both my HTC 10 and Pixel C show Charging Rapidly after around 45 seconds on the lock screen with a time remaining counter.
Using the Aukey USB-C 2.0 cable that came with the Aukey charging station I do not get Charging Rapidly at all on my HTC 10, I only get "Charging" and a percentage.
However, I do get Charging Rapidly with time remaining counter on my Pixel C when using the Aukey USB-C 2.0 cable.
Based purely on my own testing, I would make sure you use high quality cables, preferably the 3.1 gen cables and then nothing will be slow. I have no idea why the USB-C 2.0 cable doesn't like to Quick Charge my HTC 10, and I don't have any other gen 2.0 USB-C cables to try out, so sorry about that.
I hope that helps some of you out.
Click to expand...
Click to collapse
Mine does not show Charging Rapidly even though I use HTC supplied charger and cable! Do I need to activate it or what? I am using and EU plug converter to my US charger, might that be the problem, although I doubt it just passes on the same supply, its not a frequency/voltage converter.
Thank you for your help!
fidanhGPE said:
Mine does not show Charging Rapidly even though I use HTC supplied charger and cable! Do I need to activate it or what? I am using and EU plug converter to my US charger, might that be the problem, although I doubt it just passes on the same supply, its not a frequency/voltage converter.
Thank you for your help!
Click to expand...
Click to collapse
I'll check tonight and let you know later, but I'm pretty sure that the charger that comes the HTC 10 in the box is NOT a Quick Charge 3.0 Rapid Charger... Which would explain why you are not seeing "Charging Rapidly" with the original charger and USB cable. I may be wrong, but I will let you know either way in this thread as it is honestly something that I did not look at when I got my phone. Mine is a UK model bought in-store in the UK so what you get in the box may vary depending on the region you purchased from.
Cheers
fidanhGPE said:
Mine does not show Charging Rapidly even though I use HTC supplied charger and cable! Do I need to activate it or what? I am using and EU plug converter to my US charger, might that be the problem, although I doubt it just passes on the same supply, its not a frequency/voltage converter.
Thank you for your help!
Click to expand...
Click to collapse
The supplied HTC charger and cable are QC 3.0 compatible. They show "Charging rapidly" when I connect my phone.
The iClever 24w QC 3.0 charger works with the orange-e 3.1 usb c. It displays "chargin rapidly". This is probably unrelated, but the charger doesn't show it as chargin rapidly, but the phone does.
svmpatel said:
I'll check tonight and let you know later, but I'm pretty sure that the charger that comes the HTC 10 in the box is NOT a Quick Charge 3.0 Rapid Charger... Which would explain why you are not seeing "Charging Rapidly" with the original charger and USB cable. I may be wrong, but I will let you know either way in this thread as it is honestly something that I did not look at when I got my phone. Mine is a UK model bought in-store in the UK so what you get in the box may vary depending on the region you purchased from.
Cheers
Click to expand...
Click to collapse
The supplied charger is definitely a quick charge 3.0 charger, it even says it on the power brick. It doesn't matter what region you are in, all of them come with a quick charge 3.0 charger.
Sent from my HTC 10 using Tapatalk
Lancerz said:
The supplied charger is definitely a quick charge 3.0 charger, it even says it on the power brick. It doesn't matter what region you are in, all of them come with a quick charge 3.0 charger.
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Yup, you are correct. Just got home and plugged my charger in and it too shows "Charging Rapidly". COol, now I have a backup in case my Aukey stops working for whatever reason.
@fidanhGPE I'm not sure why yours doesn't show as Charging Rapidly when using your original charger, possibly something wrong with your handset maybe? Sorry I can't be of more help to you as all mine works fine with the original HTC supplied charger and HTC USB-A to USB-C charging cable, and also with the Aukey charging station and a USB-C to USB-C Gen 3.1 cable.
Cheers
Having a Nexus 6P, I was under the impression "rapid charging" only worked with a type-c to type-c charger..?
fidanhGPE said:
Mine does not show Charging Rapidly even though I use HTC supplied charger and cable! Do I need to activate it or what? I am using and EU plug converter to my US charger, might that be the problem, although I doubt it just passes on the same supply, its not a frequency/voltage converter.
Thank you for your help!
Click to expand...
Click to collapse
It might be the converter because you should get "Charging rapidly" when using the charger and cable that came with the phone (that is still weird though), and yes they are Quick Charge 3.0 compatible like the other person mentioned above.
PaoloMix09 said:
It might be the converter because you should get "Charging rapidly" when using the charger and cable that came with the phone (that is still weird though), and yes they are Quick Charge 3.0 compatible like the other person mentioned above.
Click to expand...
Click to collapse
I checked it, it QC 3.0 and it is charging rapidly, though I get it only on the power/battery settings only, no notification when I plug it in.
On another note, do you know if I can use old (normal) car chargers on HTC 10? Will it charge the phone, although I am not expecting a quick charge there? Will it harm the phone?
fidanhGPE said:
I checked it, it QC 3.0 and it is charging rapidly, though I get it only on the power/battery settings only, no notification when I plug it in.
On another note, do you know if I can use old (normal) car chargers on HTC 10? Will it charge the phone, although I am not expecting a quick charge there? Will it harm the phone?
Click to expand...
Click to collapse
Nah man just make sure you have a type a to type C usb cable that has that 56ohm resistor crap to make sure your phone will be fine. Phone will charge just fine. I actually just got a QC 3.0 car charger as well and it doesn't charge THAT much faster than an old car charger I had.
Hi there.
I recently purchased a Samsung A54 and noticed that it came with USB-c to USB-c charger. It did not come with the plug. I have been using a normal USB-USB c cable and original Samsung fast charger from an older device to charge the phone (as i do not yet have access to a USB C plug). I have noticed that the charger becomes extremely hot and makes a buzzing sound. The charger also cuts out and restarts again multiple times during the charging process. Is it safe to use the USB charger or do I need to buy a USB-C charger?
Thanks so much
nicz0906 said:
Hi there.
I recently purchased a Samsung A54 and noticed that it came with USB-c to USB-c charger. It did not come with the plug. I have been using a normal USB-USB c cable and original Samsung fast charger from an older device to charge the phone (as i do not yet have access to a USB C plug). I have noticed that the charger becomes extremely hot and makes a buzzing sound. The charger also cuts out and restarts again multiple times during the charging process. Is it safe to use the USB charger or do I need to buy a USB-C charger?
Thanks so much
Click to expand...
Click to collapse
Just replace the charger. It's a lot cheaper than the phone.
I've had good results with the Anker Nano series.
I'd expect this to be the charger anyway and not from the phone with it.
I use the A53 with my old Samsung 15 watt fast charger and the cable that charger came with just fine. There's no problem. The a54 should be no different.
So, I expect the charger to have a problem.
nicz0906 said:
Hi there.
I recently purchased a Samsung A54 and noticed that it came with USB-c to USB-c charger. It did not come with the plug. I have been using a normal USB-USB c cable and original Samsung fast charger from an older device to charge the phone (as i do not yet have access to a USB C plug). I have noticed that the charger becomes extremely hot and makes a buzzing sound. The charger also cuts out and restarts again multiple times during the charging process. Is it safe to use the USB charger or do I need to buy a USB-C charger?
Thanks so much
Click to expand...
Click to collapse
This must be an issue with the charging brick, get the Anker C-Type Charger. Its the best in the game!
slytherin_eeper said:
This must be an issue with the charging brick, get the Anker C-Type Charger. Its the best in the game!
Click to expand...
Click to collapse
I got the Samsung Charger brick with the phone but I use the Anker Charger anyways! Ive had this for more than a year and I use this as my primary charging brick. Never faced any issue so far.
I was using my old Oneplus Warp charger (65W) and was also getting heating, and phone would only charge for like 10 mins before stopping.
Bought a Belkin 25W USB-C brick and all my issues went away