Develop Bugs

Why is my 5x "Charging slowly"?

Just got my 5x today, and it does "rapid charging" when I connect with the charger in the box, but when I connect using other USB cables/plugs (one supports QC 2.0, the other is a regular charger but supports 2.1A charging), I get a message that the device is "Charging slowly."
Are there other certain specs that a cable or charger has to have to take advantage of rapid charging?

Fast charging on USB-C is apparently very picky when it comes to cables. I havent't tried charging from the USB-A cables that I bought, but the reviews for one that I was considering said that the cable limited the charging capability to 500mA. I know little about qcomm's Quick Charging but I do know that it requires feedback from an enabled device before it will allow full power. I wouldn't be surprised if the lack of that feedback from the N5X was limiting current from the charger, but it definitely looks like a quality cable is the first step to success. Notice how thick the factory LG cable is...
Most cables limit current by a significant amount. Even factory ones. That's why the OnePlus One charger was so popular. The wall dongle was nothing special (2.0A) but the cable was thick enough to actually let it output that current. The only difference now is that our phone will actually tell us if it's hooked up to a crappy charger/cable.

Thanks for the reply, I'll have to do some hunting on Amazon for another cable and see what happens.
Appreciate it if anyone else can chime in too.

the Nexus 5X does not support Qualcomm Quick Charge, at all.

Thanks, I know QC is not supported, I was just offering up that I tried one, and that I tried multiple charges that support 2.1A charging.

Interestingly enough, if I use either of the QC certified chargers that I got along with my S6 (which only output 2A) I get rapid charging. Using an Anker QC charger (also 2A) I don't, and using a different charger (can't remember the brand at the moment, but also 2A, but not QC), I also get slow charging.
Hmm...

HTC 10 having trouble to charge on 1A charger

Hello everyone,
I noticed that my HTC 10 (Europe Unlocked FW 1.80) has trouble charging on 1A chargers, the charging LED blink every 5-10 seconds.
It does work fine with a 1.5A charger and the bundled quick charger (2.5A). It did also work fine when attached to the laptop directly.
Did you also experience this behavior?

I have original HTC wall charger 5V-1A and HTC charges without problems on factory cable.
On non complaint, cheap usbA to usb type C cables the led is blinking and not charging.
I have charged my HTC10 on a 1A charger many times and everytime without problem.

Interesting, I am also using an original HTC charger with the bundled cable and I do get the issue.
Are you by any chance also running the 1.80 ROM?

Today I updated to .401, I have EU phone. No charge issues, my phone charges slowly from this 1A charger right now.

fun_key said:
Interesting, I am also using an original HTC charger with the bundled cable and I do get the issue.
Are you by any chance also running the 1.80 ROM?
Click to expand...
Click to collapse
How did you measure the actual current?
How did you establish that the actual output is 1A?
Sent from quite brutal hTc 10 ..

jauhien said:
How did you measure the actual current?
How did you establish that the actual output is 1A?
Sent from quite brutal hTc 10 ..
Click to expand...
Click to collapse
I did simply read what was written on the charger and assumed that it would be correct. I did carry on with my investigations, and the phone charges fine with a lot of charger (including Samsung & apple 1A). It just fail with 3 old HTC ones rated 1A.

Did you tried to move the usb plug in the charger to determine if it is connected properly? Do that and watch if the red led on the phone lights up.

Yes, I did move the charger it does not help.
The red LED is active for about 10 seconds, then it stops, and after 2 seconds it lights again.
But in the end I don't mind - I just use other chargers
@cavist: Out of curiosity, are you on 110W or 230W?

I am on 230V, I have eu spec, original HTC charger from my M7 bundle, I noticed that one of my cables ordered online has something wrong with the connector and I need to move it in the charger to get it working so I thought, maybe the HTC charger wear quite quickly and some connector can not fully connect with the paths.
All my other type C cables are fine with it. I use this charger to charge my M10 over night and the QC3.0 charger to quickly charge on the desktop.

I have been charging my 10 every night on a Samsung original 1A charger + original HTC USB A to C cable. No issues at all.
I recently bought some cheap USB A to C cables, and the phone won't charge unless I pull the USB A end slightly out from the Samsung 1A charger.
But the cheap cable works fine with my other chargers, so I presume it's a mechanical tolerance issue between the Samsung 1A USB A jack & the USB A end of my cheap cable.

chong81 said:
I have been charging my 10 every night on a Samsung original 1A charger + original HTC USB A to C cable. No issues at all.
I recently bought some cheap USB A to C cables, and the phone won't charge unless I pull the USB A end slightly out from the Samsung 1A charger.
But the cheap cable works fine with my other chargers, so I presume it's a mechanical tolerance issue between the Samsung 1A USB A jack & the USB A end of my cheap cable.
Click to expand...
Click to collapse
Same with my HTC charger and certain USBA connectors.

QC Chargers

I have a QC 2.0 charger that worked fine with my Note 4 (2A) and Note 3 (only 1A), but doesn't charge my axon. It seems to be a protocol negotiation issue. Right when you plug it in, it says 1.5A, 1A, etc.. then after 30 seconds or so, it goes to discharging.
Has anyone tried their phones with other QC chargers (not the stock one that comes with the phone)?

The Axon 7 is QC 3.0, so maybe that's the issue?
My old non-QC charger work just fine with my Axon 7 (though of course they're not as fast).

I also have a quick charge 2.0 charger that doesn't work with my USB type c cables. However when I use a micro USB cable with an adapter it works fine so maybe give that a try.

Anyone recommend any QC 3.0 chargers? I would like an extra one for travelling and maybe one for the car.

imp3r10 said:
Anyone recommend any QC 3.0 chargers? I would like an extra one for travelling and maybe one for the car.
Click to expand...
Click to collapse
i bought this car quickcharge 3.0 charger from amazon:
https://www.amazon.com/Aukey-CC-T7-Technology-Smartphones-Certified/dp/B019OSX8UC
works perfectly, comes also with standard charging port for other devices.

vizzze said:
i bought this car quickcharge 3.0 charger from amazon:
https://www.amazon.com/Aukey-CC-T7-Technology-Smartphones-Certified/dp/B019OSX8UC
works perfectly, comes also with standard charging port for other devices.
Click to expand...
Click to collapse
What cable do you use?

imp3r10 said:
What cable do you use?
Click to expand...
Click to collapse
tried with the ZTE cable coming with the phone, but just received a spare USB3->USB-C always from Aukey to use in the car.
ZTE cable working fine, i still have to try the Aukey cable though (https://www.amazon.it/gp/product/B0196GHUEM)

vizzze said:
i bought this car quickcharge 3.0 charger from amazon:
https://www.amazon.com/Aukey-CC-T7-Technology-Smartphones-Certified/dp/B019OSX8UC
works perfectly, comes also with standard charging port for other devices.
Click to expand...
Click to collapse
I have this car charger as well, along with this usb C cable, at least according to Amazon, but it looks nothing like this, maybe it got updated.
https://www.amazon.com/gp/product/B013RMG6SM

thjoca3 said:
I have this car charger as well, along with this usb C cable, at least according to Amazon, but it looks nothing like this, maybe it got updated.
https://www.amazon.com/gp/product/B013RMG6SM
Click to expand...
Click to collapse
This cable doesn't *advertise* using a 56k resistor. I'd stay away from it unless clarified.

Does this one seem OK?
https://amazon.com/gp/product/B0146FK3G0/ref=crt_ewc_title_srh_1?ie=UTF8&psc=1&smid=A19QP33IVZMM7A

emtownsend said:
Does this one seem OK?
https://amazon.com/gp/product/B0146FK3G0/ref=crt_ewc_title_srh_1?ie=UTF8&psc=1&smid=A19QP33IVZMM7A
Click to expand...
Click to collapse
It seems to be working just fine. However, the built-in cable might seem like a bonus but it's not such a good idea... It will be the first part to break (as always with attached cables) and you charger will loose its value.
I'D consider this instead. Same price but you need an USB type C cord (this pack is awesome). I own both these articles and i don't regret buying them one second .

Sorry, I can't post links since I'm a new XDA user...
I've bought on Aliexpress a Choetech wall charger (ASIN B01D9QZV28) and a Choetech car charger (ASIN B01582ELMC).
They work great with the supplied ZTE USB-C cable and a Choetech USB-C Cable.

djona12 said:
It seems to be working just fine. However, the built-in cable might seem like a bonus but it's not such a good idea... It will be the first part to break (as always with attached cables) and you charger will loose its value.
I'D consider this instead. Same price but you need an USB type C cord (this pack is awesome). I own both these articles and i don't regret buying them one second .
Click to expand...
Click to collapse
thib_dem said:
Sorry, I can't post links since I'm a new XDA user...
I've bought on Aliexpress a Choetech wall charger (ASIN B01D9QZV28) and a Choetech car charger (ASIN B01582ELMC).
They work great with the supplied ZTE USB-C cable and a Choetech USB-C Cable.
Click to expand...
Click to collapse
Thank you for the suggestions. You know, it just occurred to me that my car (2016 Mazda CX-5) lacks a 12v "cigarette" style outlet up front. I have two always on dedicated USB charging ports in my arm-rest. Those ports are not quick charge ports though. I have two other USB ports up front where the 12v socket is usually located and these are standard USB for the infotainment setup. Hum.... The phone will charge OK on a standard USB to C cord right that lacks QC 3? Bummer. Was thinking I could get QC in the car but not likely! I will need the suggested cables either way though.
I may have a 12v in the armrest too, but same deal - I'll need longer cords.

emtownsend said:
Thank you for the suggestions. You know, it just occurred to me that my car (2016 Mazda CX-5) lacks a 12v "cigarette" style outlet up front. I have two always on dedicated USB charging ports in my arm-rest. Those ports are not quick charge ports though. I have two other USB ports up front where the 12v socket is usually located and these are standard USB for the infotainment setup. Hum.... The phone will charge OK on a standard USB to C cord right that lacks QC 3? Bummer. Was thinking I could get QC in the car but not likely! I will need the suggested cables either way though.
I may have a 12v in the armrest too, but same deal - I'll need longer cords.
Click to expand...
Click to collapse
If it's standard USB A ports, the phone will charge at a normal rate, just not at QC rate.
That's what i like about those cables. 1 is really short (~30cm/1ft) one is very long (~2m/6ft) and the rest are a standart length (~1m/3ft). They all provide USB 3.0 and QC 3.0 support.

Ordered! Thanks again.
Sent from my VS990 using Tapatalk

At home, I use the quick charger and the USB cable that came with the phone as well as a Insignia 10 ft. USB-C to USB 2.0 cable with Insignia USB AC adapter.
In my car and on the go I use a Platinum QC 2.0 car adapter (http://www.bestbuy.com/site/platinum-quick-charge-car-charger-black/1638009.p) and AC adapter (http://www.bestbuy.com/site/platinum-quick-charge-wall-charger-black/1637019.p) with VCE cables (https://www.amazon.com/VCE-3-3FT-6-6FT-OnePlus-950-3PACK/dp/B01J0VVKEY). The cables are Benson-approved and USB 3.0 for a really good price.

I keep my old Samsung quick charge brick (from my Note 4) and a USB type-c cable from my OnePlus 2 in my bag for when I'm out and they work just fine for quick charging. Not as fast as the ZTE cable/brick combo, but pretty close.

fast charging pickyness

I've had a nexus 5x before and own a pixel table. Both come with USB C port to charge. So i bought a itian qc3.0 charger at that time. (http://www.gearbest.com/chargers-cables/pp_389793.html)
Now i changed to the lg g6, but it refused to do the 'fast charging ' when i use that chargers qc3.0 port and even says 'slow charging' when connecting to the usb c output.
Is it the combination that's just flakey or did they put something specific in the original charger that comes with the lg g6?
I'm bit lost on the topic of chargers currently, anyone care to enlighten me on what should could would work?

Lg g6 is picky I think
Sent from my SM-G955U using Tapatalk

I'm using the charger from my Nexus 6 and my G6 says that it's quick charging. Only QC 2.0 on that one though.

Obscure Reference said:
I'm using the charger from my Nexus 6 and my G6 says that it's quick charging. Only QC 2.0 on that one though.
Click to expand...
Click to collapse
wtf.. i hate your luckiness :angel:

Apb said:
wtf.. i hate your luckiness :angel:
Click to expand...
Click to collapse
Works fine with my wife's charger from her Galaxy Note 4 as well. ? (Pretty sure that's a QC 2.0 charger as well.)

Does LG not provide a qc 3.0 charger with their own phone ??

Mine came with a MCS-H06UR charger.
Rated @ 9.0V 1.8A / 5.0V 1.8A
After a quick Google search I've had no luck ascertaining if this is QC 2.0 or QC 3.0.

From what I can tell, my phone charges as fast if not faster using the 5V/3A charger that came with my 6P.
From what I've read online, the LG G6 also supports USB-PD.
Sent from my LG-H870 using Tapatalk

Off topic a bit. Thoughts on overnight wireless charging. I have a great charging cradle that I want to use but don't want phone to crack at night from hours of heat. Sony z2 and z4v had issues with that

lg3FTW said:
Off topic a bit. Thoughts on overnight wireless charging. I have a great charging cradle that I want to use but don't want phone to crack at night from hours of heat. Sony z2 and z4v had issues with that
Click to expand...
Click to collapse
Shouldn't really get hot once it's fully charged?

The charger that comes with it is a quick charge 3.0 charger and can completely charge your phone from zero in less than 2 hours easily. You have to use the cord that came with it though, or at least one that is compatible. If you look at the icons, you will see a different one than the usual charging icon. Pulling down the menu shows something about fast-charging when its active.
My experience comes from the Sprint version.

lg3FTW said:
Off topic a bit. Thoughts on overnight wireless charging. I have a great charging cradle that I want to use but don't want phone to crack at night from hours of heat. Sony z2 and z4v had issues with that
Click to expand...
Click to collapse
i use one from Tylt each night since im always on-call. havent had a problem once.

None of my QC 3.0 charger fast chagrge my G6. The QC 2.0 chargers do.

I've bought a Choetech wall usb charger, QuickCharge 3.0 with its usb type-c cable, and when I plug it on LG G6, it says that there's fast charging.
https://amzn.com/B019Q5WT6W

I do not believe the LG stock charger is qc qc 3.0 compatible because its fixed mat output at 9v is 1.8a
qc 3.0 defines the max amps at each voltage level from 5v to 9v to 12v
I ended up buying anker qc 3.0 chargers for my car and for ac wall outlet. also bought their nice braided usb c cable. every combination yields a fast charger notification in the drop down and the ampere app confirms this. also watching the real time output is impressive from all these chargers.
the benefit to using a certified qc 3.0 charger is that the phone will tell it exactly what amps to deliver based on charge & temp.
further, the G6 has a heat pipe to help cool the entire phone including the battery, to help prevent a galaxy note scenario.
wireless charging is slow Qi spec and is NOT fast like samsung. however, slow charging over wireless is great for overnight.
I use anker's qi charging puck and it works great except I have to remove my case. same with the samsung fast charger puck. my wife doesn't have to remove the case on her S7 to do regular or fast charging. LG's design is obviously inferior for the Qi to pickup and activate the coil.

Today Amazon delivered also this Anker dual usb car charger (QuickCharge 3.0):
http://amzn.com/B01K9MQ8WW
and when LG G6 is connected it shows that is in fast charging mode.

Those who bought QC 3.0 charger and those who trying different cables with LG G6 charger, Try Cable from Oneplus 3, I get an improved charging of 10-20 minutes less compared to stock LG cable

The issue might be the cable you're using. I've had no trouble fast charging using an old ASUS QC 2.0 charger, or a cheap car QC 3.0 charger. Even when using microUSB cables with USB-C adapter tips, but I'm using decent cables (mostly Monoprice and Anker).

I've confirmed that the charger that came with my G6 is QC3.0 (model MCS-H06UR, UK 3-pin). Using a USB power meter, the voltage will increase from 5V to 9V in small steps. If I use a QC 2.0 charger (stock charger from Note4/S7edge), it will jump from 5V to 9V immediately.

tulving said:
I've bought a Choetech wall usb charger, QuickCharge 3.0 with its usb type-c cable, and when I plug it on LG G6, it says that there's fast charging.
https://amzn.com/B019Q5WT6W
Click to expand...
Click to collapse
How much time does it take to charge fully? Did you record time ?

Which car charger

Do you have any recommendation for car charger (cigarette lighter plug)?
One with fast charger feature which is compatible with Google Pixel 2 (USB-C PD?).
For my old Nexus 6, I must use car charger with Qualcomm Quick Charge 2.0, because otherwise the Nexus 6 will still loosing power when using car navigation software. Standard car charger cannot keep up with the battery drain.
Thanks.

I came from a Nexus 6 too. I ended up buying micro USB to usb-c mini adapters which just go on the end of my old USB leads. I threw one on the car charger and it works fine. It's a stop Gap measure, and I mainly got it for an ihome Android charger/radio, but ended up wrapping duct tape around a usb-c charger cable and putting it in the radio dock.
https://smile.amazon.com/gp/aw/ya/r...reorder_params=B01J3GG82U,112-8020237-8121850
Sent from my Pixel 2 using Tapatalk

I use the Aukey QC 3.0 car charger with dual 3.0 USB ports. It does not register as rapid charging but it is very quick. I used it with Moto Z Droid and used Google navigation while charging and it charges quick and does not lose charge. I also use the Aukey 3.0 wall charger and that does register as rapid charging.

I just bought a Deltaco (a Scandinavian brand) 3A/5V 15W car charger for 6,5 USD. Can't feel much difference compared to the original home charger's 18W using a 2. Gen Goobay 60W USB C-C cable.
Phone registers the input as rapid charging.
Ampere registers 2.7A with the screen on. Same as the standard charger, so I didn't find any reason why it should be worse
Sendt fra min Pixel 2 med Tapatalk

I bought the Nekteck 5.4 amp charger https://www.amazon.com/gp/product/B01CH9NEM2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1. The curly cord is hard wired and side mounted with a USB C plug on the end, it charges my Pixel 2 fast (charging rapidly). I had issues with other chargers and cables that wouldn't charge my Pixel 2 at full speed, this one works great. Also, it has a USB A port on the top so you can rapidly charge two devices at the same time.

The Verizon branded one works really great. Charges very fast.

Any update on these?

I'm going to buy this USB-C with Power Delivery charger from Aukey:
https://www.aukey.com/products/usb-c-dual-port-car-charger-with-power-delivery
Will report back with results.

I use the tronsmart car charger.. It charges the phone rapidly.. Made a short video on it:

I have a Verizon USB C (purchased from Amazon for $17) and it works great. It fits very tight and shows up as fast charging.
https://www.amazon.com/dp/B0711FG2TB/ref=cm_sw_r_cp_apap_sLsxpduAP1r1H

PuffDaddy_d said:
I'm going to buy this USB-C with Power Delivery charger from Aukey:
https://www.aukey.com/products/usb-c-dual-port-car-charger-with-power-delivery
Will report back with results.
Click to expand...
Click to collapse
Well, I waited too long and it is out of stock, but it looks like I may have avoided a bad purchase according to this supposed Google Engineer's review:
https://www.amazon.com/gp/aw/review/B01LGO9LE4/R3J0UNYEXFSH0X/ref=cm_cr_dp_mb_rvw_1?ie=UTF8&cursor=1
Any other power delivery compatible options?

I think the hard wired C cabled chargers are the safest bet because of all the dicey 3rd party C cables out there.

I just got the $10 Monoprice USB C charger with PD (9v 3A) because it is rated to charge the at least as fast as the in-box wall charger. Not shilling for Monoprice, just seemed like a better deal than all the sketchy chargers on Amazon with fake reviews, none of which offered anything but 5v 3A or worse at under $25. I figure it's trustworthy because they say it's certified and Benson tested their cables and said they were OK. So far it has not tried to burn my car down or nuke my phone. I'm using it with the 0.5m Monoprice cable, it was about $17 with tax for the bundle. I can't post links, search 24424 on Monoprice.

So I've been googling around and trying to research this as much as I could but I'm still not sure of the answer so I was wondering if I could get some answers here. By the way, apologies if my terminology about the different connections are incorrect at any point in my post.
So I originally bought this Aukey car charger with Qualcomm 3.0 quickcharge (LINK) with 2 outlets for a USB Type-A connection to be plugged into it to charge 2 devices. I originally used it for my old phone that used a Micro-USB connection. After I got my Pixel 2, I needed new cables with its USB-C connection. I went and got these Anker USB-A to USB-C cables (LINK) so that I could charge with these cables or to connect my phone to my PC. Now, I've read that older Anker USB-C cables have had issues but from doing some more reading that these have been fixed I believe.
I am planning on using the Aukey charger mentioned above, and then plugging in one of the Anker USB-A to USB-C to charge my phone and was wondering if it'll be a safe combination? From some googling around and research, it seems it won't charge as fast as the wall charger (which is amazingly fast btw) or a USB-PD connection but that's perfectly fine as I don't need it to be as quick. I'm just cautious because I've read about the potential issues with using a bad charger with a not-up-to-standard cable (like something that isn't necessarily verified by Benson Leung or something). I don't care/need USB-PD charging (which I assume is where it uses a dedicated USB-C cable coming from the charger or a separate USB-C to USB-C cable connecting the cable to charger), as long as the combination I just mentioned works.

Toronadian said:
So I've been googling around and trying to research this as much as I could but I'm still not sure of the answer so I was wondering if I could get some answers here. By the way, apologies if my terminology about the different connections are incorrect at any point in my post.
So I originally bought this Aukey car charger with Qualcomm 3.0 quickcharge (LINK) with 2 outlets for a USB Type-A connection to be plugged into it to charge 2 devices. I originally used it for my old phone that used a Micro-USB connection. After I got my Pixel 2, I needed new cables with its USB-C connection. I went and got these Anker USB-A to USB-C cables (LINK) so that I could charge with these cables or to connect my phone to my PC. Now, I've read that older Anker USB-C cables have had issues but from doing some more reading that these have been fixed I believe.
I am planning on using the Aukey charger mentioned above, and then plugging in one of the Anker USB-A to USB-C to charge my phone and was wondering if it'll be a safe combination? From some googling around and research, it seems it won't charge as fast as the wall charger (which is amazingly fast btw) or a USB-PD connection but that's perfectly fine as I don't need it to be as quick. I'm just cautious because I've read about the potential issues with using a bad charger with a not-up-to-standard cable (like something that isn't necessarily verified by Benson Leung or something). I don't care/need USB-PD charging (which I assume is where it uses a dedicated USB-C cable coming from the charger or a separate USB-C to USB-C cable connecting the cable to charger), as long as the combination I just mentioned works.
Click to expand...
Click to collapse
It will charge your phone just fine, but as you said, it will not fast charge. I use a similar setup now as I continue to look for the right PD car charger.

Toronadian said:
So I've been googling around and trying to research this as much as I could but I'm still not sure of the answer so I was wondering if I could get some answers here. By the way, apologies if my terminology about the different connections are incorrect at any point in my post.
So I originally bought this Aukey car charger with Qualcomm 3.0 quickcharge (...)
I am planning on using the Aukey charger mentioned above, and then plugging in one of the Anker USB-A to USB-C to charge my phone and was wondering if it'll be a safe combination? From some googling around and research, it seems it won't charge as fast as the wall charger (which is amazingly fast btw) or a USB-PD connection but that's perfectly fine as I don't need it to be as quick. I'm just cautious because I've read about the potential issues with using a bad charger with a not-up-to-standard cable (like something that isn't necessarily verified by Benson Leung or something). I don't care/need USB-PD charging (which I assume is where it uses a dedicated USB-C cable coming from the charger or a separate USB-C to USB-C cable connecting the cable to charger), as long as the combination I just mentioned works.
Click to expand...
Click to collapse
PuffDaddy_d said:
It will charge your phone just fine, but as you said, it will not fast charge. I use a similar setup now as I continue to look for the right PD car charger.
Click to expand...
Click to collapse
You guys should both look at 24424 on Monoprice. That QC charger isn't going to fast charge no matter what, I used one with a Tronsmart branded USB C to Micro B adapter that Benson recommended no problems though. They have a cheaper non-PD charger too, but why bother?

fishlifters said:
You guys should both look at 24424 on Monoprice. That QC charger isn't going to fast charge no matter what, I used one with a Tronsmart branded USB C to Micro B adapter that Benson recommended no problems though. They have a cheaper non-PD charger too, but why bother?
Click to expand...
Click to collapse
I'm sorry, I don't understand. If we already have charger that aren't PD compliant then why do you recommend buying another?
I plan to get this one since it had strong reviews and tests:
GearMo 75W QC 3.0 & USB Type C Power Delivery (PD) Car Charger works with: MacPro,Chromebook,Galaxy s8 s7 Edge Plus,Note 8,LG G6 G5 V20 V30,HTC 10,a9,8,Pixel 2 XL,Nexus,iPhone 7,iPad. FCC Approved https://www.amazon.com/dp/B07115BLPP/ref=cm_sw_r_cp_apa_bSiBAb2H2P7W0

PuffDaddy_d said:
I'm sorry, I don't understand. If we already have charger that aren't PD compliant then why do you recommend buying another?
I plan to get this one since it had strong reviews and tests:
GearMo 75W QC 3.0 & USB Type C Power Delivery (PD) Car Charger works with: MacPro,Chromebook,Galaxy s8 s7 Edge Plus,Note 8,LG G6 G5 V20 V30,HTC 10,a9,8,Pixel 2 XL,Nexus,iPhone 7,iPad. FCC Approved
Click to expand...
Click to collapse
A USB C charger 5v 3W standard will still charge faster than a USB A QC charger, but it's only $3 less on Monoprice for the non-PD one. I don't see anything on usb DOT org listing GearMo on the certified power brick chart. I wouldn't risk it. There's no reason to put a USB 3.0 A-type port on a charger, seems fishy to me.

This one looks promising as well:
https://www.amazon.com/dp/B07234DKQ5/ref=cm_sw_r_cp_awdb_t1_D0lIAb2M0BDZG
Sent from my LG-H932 using Tapatalk

I'm using this Meagoes charger from Amazon. Works well.
https://www.amazon.com/gp/product/B076H7X8QN