Related
Hello,
I have a strange problem with my HTC Artemis (O2 XDA branded, bought in Germany, no lock)
It behaves unstable and indeterministic.
Unstable means that it crashes/stucks or turns off.
Indeterministic means that it happens when i plugg it to charger, when i'm syncing, when a phone rings, when using applications/tomtom or just i arrive to work and i find the device off.
When it crashes or i find it off, the biggest problem is to boot the device. It takes me typically 10mins, when i'm always trying to press the power button, push the reset button or unplugg the battery for a while in random order until i bring it to work.
After first crach, the device also often crashes or stucks again during the boot process.
Once, the device was so dead, that it took me two days to bring it into bootloader mode and then i could at least flash the ROM.
All these was happening with ARTEMIS TOUCH 4.01 WWE - LITE NO CUBE.
Yesterday, i switched to ARTEMIS TOUCH 4.02 WWE - LITE NO CUBE (burned FW twice) without installing any other applications and the problems are still here
My personal feeling is that it is getting every week worser.
When i bought the device (eBay), there was original FW with Win Mobile 5 on it, i immediately flashed to ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device. So i flashed to 4.01 and this issue was away, but approx 2months ago, the above described behaviour has started and nowdays i'm fighting with it 2-3x a day.
so, can anybody help?
GiZMo
Similar here
I have a similar problem, what's really strange to me is, that as far as i can recall it started happening 2 months ago or so also!! weird huh...
my device simply reboots from time to time! even while i'm making a call.
the weird thing about these reboots is that when it comes back to live i do not have to enter my pin to enable the phone! everytime i perform a manual reboot (by software, using the pin or remove battery) i have to insert my pin to able to make a call...
i have upgraded from 3.01 full touch to 4.02 full touch about the time it started, i have now 4.02 vanilla touch but problem still occurs from time to time.
any ideas?
Im another one to join this boat!
Bought an MDA C 3, two days ago, bought of someone from gumtree.com.
Worked fine for the first hour, and then locked up - nothing on the screen, no LED. Only way to get it going was to remove battery and then press power button.
I upgraded the ROM from the original t-mob UK WM5 to mechles fine release: http://forum.xda-developers.com/showthread.php?t=371182
The lock-ups / crashes have now become rarer, on average every 4 hours (before was every 1 hour).
There is no pattern to them either, although I have saw the screen trun all corrupted just before it happens. The last one was caused when I pressed the 'start' button.
I'm on a T-Mob contract, and lost my Kaiser, got ripped of when I tryed to replace it by a tosser on here for $375 Thief on the loose thread, and was hoping my luck had changed when I bought this one!!
It is T-mob branded and I wonder if there isn't a fix on here, would T-Mob repair it under warranty??
same "issue" with no entering of PIN after reboot. But not always
GiZMoSK said:
ARTEMIS TOUCH 3.01(?) WWE - FULL WITH CUBE, i can only remember that that time I had a problem with gsm radio - from time to time i found it stucked/off - to bring it to work i had to reset the device.
Click to expand...
Click to collapse
here i found a good description of that issue:
"
Originally Posted by lasertony
I've got the same problem as !Novy, but nobody seems to have noticed his question. Are there any other guys out there with this strange problem ? I have been using this rom for a while and sometimes, without any visual warning the phone freezes up. This is particularly ennoying because there is no way to check wether it is working or not. Every other function or software keeps working ! The phone is just not receiving any calls or sms. So you can miss an entire day of calls and sms without knowing... Only when trying to call somebody the dialer says 'Dialing...' and nothing happens. No connection.
A soft reset is needed to get the phone working again.
"
btw, now i'm again trying to turn the device on, it's again stuck. grrr
Hello,
i had a few weeks ago a similar strange behaviour.
After changing the sd-card I had problems to turn the device on. After a hard reset it began to boot but hang.
The I flashed back to original O2 ROM. Then I had a unpredictable behaviour. Somtimes no sound. Sometimes I cound not be called. Sometimes Error message "no sim card". After every reset i had an other error.
Hard reset and flashing was no solution. Removing battery for less than 4 hours has no effect.
Then I wanted to send it back for repair. I took of the battery. The next day I wanted to try a last time and surprise: The device works fine without an error. Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
regards
Andre
It is Happening to my device too!!
It stucks every 2-3 hours!Tried many of the cooked ROMs but nothing.Also tried all the radio roms for 1-2 days.still the same!
It stucks with no particular reason.SOmetimes in s2u2 sometimes when am receiving a call.... etc.
Had the pin problem too for 3-4 times!
I will try your sugestion ANDRE and we will see!
Also i will try flashing the original rom,cid unlock and then flash the cood rom twice!
Fingers crosed....
Andre1210 said:
Its hard to believe, but the removal of the battery for more than 8 hours was the solution.
Now I use it for 5 weeks without a problem.
Click to expand...
Click to collapse
didn't help
happy u
now, i will try to flash back original german o2 rom
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
bricked or not?
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Vinnie1 said:
I think mine is sorted now, thanks to a new battery.
Installed it on Wednesday and hasn't died/crashed once since then.
I did notice before that the battery was getting warm, and I stuck the handset on the vent of my AC in the car, and this seemed to make the phone more stable.
Got one from Deal Extreme or try the XDA shop.
It worked for me!!
Click to expand...
Click to collapse
I thought it was a battery problem too, but I've 2 batteries and both are died in the same time? I think it's too strange...
My P3300 have this problem from when it is returned from assistence and with original firmware (without other applications).
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
GiZMoSK said:
did my device get bricked?
last friday i wanted to change firmware and during step1-cid unlocking (device should never been cid locked) pda got stucked. So i unplugged it and since then i cannot turn it on or get it into bootloader mode.
the only proof of life is when I take away battery and plugg it to power supply, then the red diod turns on and off for 1/2sec.
any idea what to do?
Click to expand...
Click to collapse
jahrami said:
dude i think u bricked ur device i am sorry to convey such a message!
now its time for CPR go to xda wiki and try the SD flashing get ur device back to life man
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Click to expand...
Click to collapse
but i cannot get into bootloader mode so no flashing from SD card or PC
bricked device
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
GiZMoSK said:
so my device ist still dead
is there any possibility to hard flash bootloader (when corrupt)? or the only way is to change the mainboard?
Click to expand...
Click to collapse
the good sign are the leds that means you have a very good chance...the guy made the piont...check the wiki
random crashes are often caused by hardware malfunction...sometimes the connection on the motherboard stuck,get broken or make a short-circuit...so check the hardware
i Download the HTC Fuze ROM Update- Version 5.11.502.2 WWE
after i flashed it and booted it, initial setup was taking place... it said it was setting up touchFLO. everything looked good.
until...
it just rebooted!
and it keeps cycling that way. it never gets to load windows.
i have read that other people have been having trouble with touchflo after the update... but now i cant even get windows to load.
ive been trying to find solution all day. about 15 hours. i cant even flash another rom into it. i cannot hard spl. anyone?
try hold volume down + softreset, connect usb, then install stock rom (original rom)
Do u have a Fuze or a Diamond??
Fuze roms are for Fuze devices, Diamond roms are for Diamond devices only.
And you´re in the Diamond section.
You should check that.
i cannot find the original stock rom. htc.com does not have it. i also tried searching. there was a post in which a guy had the same problem. he was directed to a S.E.A. WWE ROM. i also downloaded it and gave it a try but i got an "invalid vendor id" error. i think that means i must hard spl. but i CANT. it hangs at 0%. and i cant sspl manual. cuz i cnt even boot into an OS.
yea, i have a FUZE. i am aware that fuze roms are for fuze devices and diamond roms are for diamond devices. since i have not been successful in flashing my fuze with stock OR updated rom from htc (mainly since i cannot find the stock rom,) i am trying to flash it with ANY compatible rom.. i just need this phone working at LEAST so i can boot to an Operating system.
i am stil searching and searching for a stock rom for this fuze.... because that seems like it is my only sure bet. if anyone already knows or can point me in another direction, that would be great. i will be contacting htc rightnow.
I do not know if this was your problem, but I realized that whenever I try to flash a new rom with usb devices connected on pc, the process stops. my luck that I did before hardspl
try this link
and this
try:
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
http://rapidshare.com/files/157242627/RUU_Raphael_Cingular_US_.exe
http://forum.xda-developers.com/showthread.php?t=439346
do not forget to do the next time hardspl
hi
hi did you check the wiki? http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs has all the stock roms for xdas, this link is for the touch pro, fuze raphael whichever >.>.
yes, i did check the wiki.. for each of the att roms, it says i need spl 1.90. i have the stock spl 5.10. i dont think i can flash those roms. i have been running thru so many threads, i am just about overwhelmed
marcolero, thanks for those links. it looks like that is what im looking for (http://rapidshare.com/files/157242627/RUU_Raphael_Cingular_US_.exe)
sounds like thats it. thanks. i will try that now.
good luck, hope it works!
it worked. thanks alot
but it did not solve my initial problem... the reason why i flashed it in the first place.
my htc fuze did NOT resume from standby. this problem started suddenly one day. after the backlight dims after 30 sec, and then the lcd turns off after 1 min, pressing the power button did not wake my phone up. i was, however, able to turn the volume up and down, and heard the notification sounds.
since i could not manually hard reset my phone (the reset button did not work when pressed with my stylus) i decided to update my phone with the rom provided by htc website.
flashing was successful, but my phone kept rebooting before it loaded windows.
so now i had another problem. i couldnt even hard spl, or load any other rom. but thankfully, after much confusion and help from you guys, i found the stock fuze rom
after i flashed my phone with the rom you guys provided, i still had the problem in which my phone would not wake up after standby.
it turned out that getting a new sim card fixed my problem.
kinda makes sense... well, somehow... because i read that another guy in this forum solved HIS problem by messing with the phone settings. (choosing gsm or 3g instead of auto)
i wonder if i should make another thread for this problem and its solution. bah....
i wonder how many people have sent in their phone for repair when the solution was as simple as this. i myself, thought my lcd was damaged. becuase my phone got wet couple months ago and smudged the screen. on top of that, this phone was bought refurbished. heh... what a dilema.
thanks all
Hi that was me that solved my Standby of Death problem by changing phone band option from AUTO to 3G only (also works if set 2G only from auto)...
Its good to hear that you also solved your Standby of Death problem but by changing SIM, this doesn't surprise me, did you also change provider or was it just a faulty sim?
I don't think a change of SIM would benefit me as I had the problem with my old SIM (I don't think my SIM is faulty per se not if they are all like that) besides changing the band setting from auto to either 3G only or 2G only works for me and I'm happy with that. If I didn't have a working solution I would def try changing SIM however and I don't want to discourage doing that.
Also I would only get the Standby of Death 2-3 times a week which coinceded with being in a weak 3G area (where the phone might auto switch bands) it didn't happen as often as you had it. The problem is def connected to the SIM card.
Obviously everything I've written above only applies to those who have the Standby of Death because of the SIM or settings which impact the SIM, to rule out a software cause are best to start with a hard reset.
nlel said:
Hi that was me that solved my Standby of Death problem by changing phone band option from AUTO to 3G only (also works if set 2G only from auto)...
Its good to hear that you also solved your Standby of Death problem but by changing SIM, this doesn't surprise me, did you also change provider or was it just a faulty sim?
I don't think a change of SIM would benefit me as I had the problem with my old SIM (I don't think my SIM is faulty per se not if they are all like that) besides changing the band setting from auto to either 3G only or 2G only works for me and I'm happy with that. If I didn't have a working solution I would def try changing SIM however and I don't want to discourage doing that.
Also I would only get the Standby of Death 2-3 times a week which coinceded with being in a weak 3G area (where the phone might auto switch bands) it didn't happen as often as you had it. The problem is def connected to the SIM card.
Obviously everything I've written above only applies to those who have the Standby of Death because of the SIM or settings which impact the SIM, to rule out a software cause are best to start with a hard reset.
Click to expand...
Click to collapse
i had sufferd from the same problem as u.
but my problem was,i downloaded a radio rom patch which was going to make my jamin from 2g to 4g.i tried to install it and it makes my cell dead.becus of low battery.once ur cell phone becomes failure during rom flashing it will not accept even charging.now condition was same when i turn my cell phone it comes just for may be few seconds and becomes down but red light turns on some times.there is a way.charge ur mobile battery using desktop charger and make it charge just for 45 minuts or ur baterry will blown up.after this connect ur phone with usb cable and starts upgrading again.it will prove helpful.thank u...
Hi,
I have a Vietnam made Galaxy Note N7100 which is almost not usable, unit does not comes with any warranty as it is an export set. It runs on the default ROM and is not rooted. Initially the unit works well for a few hours after installing some apps and did some customisation, after I locked the phone, the phone seems to go into deep sleep. I'm not even able to shut off the phone. Worse still, taking out the battery and put in back after mins do not work. To turn the set on again, I got to take out the battery for a few hours or so, then I can start the unit again.
I initially thought it might be some software conflict, I did a factory reset and leave the phone there for a while, the issue persisted.
It is also not the battery issue as I have use the same battery on another N7100 and it works well.
Is there any advice on what can I do to remedy this issue?
Thanks
sgpoorguy said:
Hi,
I have a Vietnam made Galaxy Note N7100 which is almost not usable, unit does not comes with any warranty as it is an export set. It runs on the default ROM and is not rooted. Initially the unit works well for a few hours after installing some apps and did some customisation, after I locked the phone, the phone seems to go into deep sleep. I'm not even able to shut off the phone. Worse still, taking out the battery and put in back after mins do not work. To turn the set on again, I got to take out the battery for a few hours or so, then I can start the unit again.
I initially thought it might be some software conflict, I did a factory reset and leave the phone there for a while, the issue persisted.
It is also not the battery issue as I have use the same battery on another N7100 and it works well.
Is there any advice on what can I do to remedy this issue?
Thanks
Click to expand...
Click to collapse
It seems like a software issue, I would install 4.1.2 jelly bean stock rom. Using Odin. As you cam see its out already Here is the link you can go to and follow the instructions. Good luck man.
http://forum.xda-developers.com/showthread.php?t=1896696
Sent from my GT-N7100 using xda premium
Blaster1984 said:
It seems like a software issue, I would install 4.1.2 jelly bean stock rom. Using Odin. As you cam see its out already Here is the link you can go to and follow the instructions. Good luck man.
http://forum.xda-developers.com/showthread.php?t=1896696
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
This came to me as well, but the set auto shut off before I can even root the unit.
Have a fix for you guys
I had the same problem after some messed up rom flash. If my Note 2's screen goes off for more than 10 seconds, I wouldn't be able to wake it back up without reboot... It was basically in an unusable state. Luckily after 2 whole days of digging I've found the solution.
1. Go to this thread http://forum.xda-developers.com/showthread.php?t=1915386
2. Scroll about 1/3rd of the way down and look for the attachment "BOOTLOADER_N7100.zip"
3. Flash the BOOTLOADER_N7100.zip with Odin using the Bootloader field
That's it!
Good luck guys. I created an account specifically to answer this question. It was a major pain in the ass finding a fix for this problem so I wanted to make sure I spread the fix on this issue so others don't need to suffer through the same thing.
SOS please
i now have the same issue where i tried the liquid rom on my n7100...as soon as it installed my phone started switching itself off within 5 secs and show a red battery light..and no love nor money can I get it on without rebooting..
i tried the bootloader in Odin after re installing the stock rom..but as soon as i select start..it fails??
Anything else?
I am also experiencing shutdowns with my Vietnam unit. I have 4.1.2 original ROM and I tried many possibilities to solve it. No success. The phone shuts off if I start an online radio (or tunein radio) and after max 2 min it shuts off. Doesn't matter if is on data plan or through router.
Had a problem of the phone freezing and had to restart the phone. Then again it would freeze after some time. Flashed stock rom with bootloader and pit but it still persisted. Sent it to the service centre and got my phone back yesterday after mb change. The new mb is with the newer firmware.
Sent from my GT-N7100 using xda app-developers app
I also sent mine to service, let's see what comes back.
My vietnam unit has ben running fine for the last 4 months. Updated to stock 4.1.2 and rooted.
Sent from my GT-N7100 using Tapatalk 2
sgpoorguy said:
Hi,
I have a Vietnam made Galaxy Note N7100 which is almost not usable, unit does not comes with any warranty as it is an export set. It runs on the default ROM and is not rooted. Initially the unit works well for a few hours after installing some apps and did some customisation, after I locked the phone, the phone seems to go into deep sleep. I'm not even able to shut off the phone. Worse still, taking out the battery and put in back after mins do not work. To turn the set on again, I got to take out the battery for a few hours or so, then I can start the unit again.
I initially thought it might be some software conflict, I did a factory reset and leave the phone there for a while, the issue persisted.
It is also not the battery issue as I have use the same battery on another N7100 and it works well.
Is there any advice on what can I do to remedy this issue?
Thanks
Click to expand...
Click to collapse
This is a real problem with the Galaxy Note 2. I built a quick site to showcase the problem and to post a video that shows exactly what is happening. I am unable to post external links, so just copy and paste the following domain in to a new browser, making sure to remove and replace the DOTs: wwwDOTgalaxynote2shutsoffDOTcom
note 2 switching off by its self
Had same problem, I switched of data, wi-fi bleutooth, gps, switched them on again 1 at a time.
Phone worked ok untill bluetooth was on again, then it shut down. I think the problem is with Bt.
I emailed samsung support who suggested i connect to kies to check i had latest firmware but i
knew i had, they also suggested a factory data restset, (settings- back up and reset- factory data reset).
Did this last week phone has been working fine since.
Hope this helps.
HORRIBLE
battlenut said:
Had same problem, I switched of data, wi-fi bleutooth, gps, switched them on again 1 at a time.
Phone worked ok untill bluetooth was on again, then it shut down. I think the problem is with Bt.
I emailed samsung support who suggested i connect to kies to check i had latest firmware but i
knew i had, they also suggested a factory data restset, (settings- back up and reset- factory data reset).
Did this last week phone has been working fine since.
Hope this helps.
Click to expand...
Click to collapse
This is mad i have a vidnam made and myproblem looks like yours just thaht when it rresetsd it keeps reseting maibie 100-200...n times by itself and when it wants it starts and i can use it but recently it started toi do this more than 1 time / day like 3-4 times it is realy distuyrbing mine doers not lights the red led nothing just autorests milin tmes...and i factory rest and the problem persists .....when i put the batery in it stat automatic no button prs neded and it resets again until it does not i am so upset.... i had s3 i drop in water the screen broke i had s32 and it was shuting it self down it is stranger i love the phone bujt i need him 2 work...as my nexus 4 disapoinhts me very much it heats 2 much and batery lifew is so poor ((((((((((
Shutting down
Guys Im having the same issue
using N7000DDLS6
Dont see the file here
Can someone pls help?:crying:
As I said before, I have a Vietnam made n7100 and have had no problems with resets or shutting down. Have rooted, updated roms, etc etc. Its not country specific!
Sent from my GT-N7100 using Tapatalk 4 Beta
Same problem here, BT not working and my Note hangs every time the screen shuts off. I can wake it up immediately but after 8-10 seconds I am unable to turn it on again, must hard reset or take off the battery... No solution found so far. Flashing stock fails on sboot.bin also...
Hi everybody! I open this thread because I have a problem that I can't resolve: months ago I switched to CM 10.1 from stock ROM and I had that since 2 days ago (when arco68 told that soon he wouldn't develop this ROM for this phone anymore). So I had CM 10.1 alpha1 to alpha6, but my problem started from alpha3: in fact when I installed this release my camera starts shutting down the phone when taking pictures with flash (no matter at what resolution pictures where taken or if the flash was automatic or permanent), but only with battery under about 80% and it didn't appened when the phone it was in charge. So I read a lot of posts where people said it was a battery problem: since mine was one year old and it was rounded I replaced it with a new original one. Unfortunately the problem persisted, so I posted this problem in the thread relative to CM 10.1 ROM and I realized that other people had this problem, except that a lot of them resolve it buying a new battery (LIKE I DID!). So I waited for other releases with the hope it was a ROM problem...since Alpha6, when I realise that it wasn't resolved. So I decided to change ROM to see if it was a ROM problem and I installed a GB-based ROM: Mission ROM. But when I went to camera to take a picture with flash it appened again. So I wanted to know if it was a custom-ROM problem and I reinstalled STOCK ROM from the NANDROID BACKUP I made before installing CM 10.1. Unfortunately the problem continues to persist and it's strange, because It didn't happen before in my stock ROM. The only thing I think It could be it's that the flashlight installed on CM 10.1 broke the LED circuit because I try the full power option (or something like this, I can't remember) and there was a warning. But the strange thing is that I tried with all the 3 ROMs to keep LED on with a widget and the phone never shut down, no matter what was the battery percentage. So I wrote this post to ask someone if there is a reason for this strange behaviour and if it is a solution.
Thank you all
yesterday, i faced this problem, but my rom isnt cm10 by arco, my rom is simplified GB with s3 looks v2
at first i was shocked, and then i try to flash back into stock rom, and the LED works fine
my advice is you must flash your w into another cusrom or even stock rom and wait for the dev's solve this problem
Sent from my GT-I8150 using xda app-developers app
Unfortunately I have already tried 2 custom ROM, and now I have recovered my stock ROM and the problem isn't gone...
me too sometime face same problem !! in more roms not one or too !
There are new develops! Today I noticed that the phone shuts down when taking pictures with flash only if the brightness of the display is over 50%: under this value taking pictures with flash don’t cause the phone to shut down. So my question is: how is it possible? It’s an hardware problem or maybe a firmware one?
Trying to answer this questions I have decided to make an hard reset of my phone, but I read that when the phone reboots after the hard reset it asks an unlock code. I have no idea of what code is this, so I want to know if this is true or not, and if it’s true how can I have this code before making an hard reset?
elettrotanzboy said:
There are new develops! Today I noticed that the phone shuts down when taking pictures with flash only if the brightness of the display is over 50%: under this value taking pictures with flash don’t cause the phone to shut down. So my question is: how is it possible? It’s an hardware problem or maybe a firmware one?
Trying to answer this questions I have decided to make an hard reset of my phone, but I read that when the phone reboots after the hard reset it asks an unlock code. I have no idea of what code is this, so I want to know if this is true or not, and if it’s true how can I have this code before making an hard reset?
Click to expand...
Click to collapse
using CM 10.1 Alpha 6 , i found ur right about taking pictures with flash will turn shut the phone down if the brightness is high , u shall report that problem at the cm10.1 troubleshooting thread to get more testers for it
If you already changed the battery, maybe it's the jack that link battery to the phone...I think so cause you said that when under charge the problemdoesn't happen (because the phone take energy from the charge and not from the phone)...take a look over there...surely it's a mechanicalissue, not roms issue...
jam90 said:
If you already changed the battery, maybe it's the jack that link battery to the phone...I think so cause you said that when under charge the problemdoesn't happen (because the phone take energy from the charge and not from the phone)...take a look over there...surely it's a mechanicalissue, not roms issue...
Click to expand...
Click to collapse
ok, but I don't know how to resolve this issue...I will try an hard reset...I think cyanogenmod wrote something in the firmware of the camera that is still present...with an hard reset maybe the firmware will be reset to stock...
mosta_9741 said:
using CM 10.1 Alpha 6 , i found ur right about taking pictures with flash will turn shut the phone down if the brightness is high , u shall report that problem at the cm10.1 troubleshooting thread to get more testers for it
Click to expand...
Click to collapse
I reported this issue in the tread, but many people answer to me that it may be a problem of mine only...
Ok, I think I'll do an hard reset. Is there something to know before doing it (like codes to reactivate the phone, etc.)?
i think is battery....because when the phone is fully charged (or with anoter battery) when shutting photo with flash it stay on
why?
while taking the picture (camera+cpu+ flash (more power than torch) +screen ecc..) the battery voltage drops suddenly if it is damaged and this drop can swich off the phone
darix96 said:
i think is battery....because when the phone is fully charged (or with anoter battery) when shutting photo with flash it stay on
why?
while taking the picture (camera+cpu+ flash (more power than torch) +screen ecc..) the battery voltage drops suddenly if it is damaged and this drop can swich off the phone
Click to expand...
Click to collapse
yes, but my battery is new and original...I can't explain this!
Hello All,
I was one of the first to get my hands on the LG G3 when it came out last year. The phone has been excellent so far, with no issues whatsoever. Lately, the phone crashes very frequently and there is a sort of reboot loop (without evening powering up to the main screen) that goes on until I manually pull the battery out. At first, it used to happen once in a while, but now it seems to happen every time i use the phone for more than 5 min.
Do you know what may be at fault over here?
I have the same issues on my G3-d855.. I did a hard reset but I had no luck.. I also installed the v21A stock ROM but nothing.. I have noticed, though, that there is a pattern in the reboots: they mostly happen when I am receiving an incoming call ( It happens before I answer the phone) or there is a switch from Mobile Data to WiFi and vice versa.. I came back to xda to find a new radio/modem to flash.. I will tell you how that goes..