Hello guys!
I have a big problem with my MDA Pro. I was trying to upgrade rom to JASJAR_ME_13082_171_10900_wwe_ship and my device stuck on boot screen. I tried to hard reset but still I have that problem. Then I tried to upgrade again, but when I connect my device to PC with USB cable, it comes popup window that says USB device not recognized and upgrade software can't read ROM version from device. I tryed with mtty software, but I can't select USB under Ports because it's not listed.
I don't know what to do next, when somewhone can help me I would expreciate it. Thanks...
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Nipit said:
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Click to expand...
Click to collapse
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
No, I wasn't able to connect to kies. I got a USB cable from original xperia x10, still same issue... Can someone tell me what to do? I downloaded a lot of drivers, but maybe there is some special driver? :/
The problem usually goes away for me when flashing from a freshly booted pc, so try restarting one of your computers for flashing and try again.
Have done that too... Any advice? :/
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
---------------------------------------------
Just after this message, without quit Multiloader:
Phone on DOWNLOAD MODE try this:
Uncheck Boot, unplug USB Cable from Phone and Plug it again, You will see Download actived in Multiloader, Just clic on DOWNLOAD. And your Flashing will be continued....
----------------------------------------------
Sory For my english.
Still the same **** :{{{ Anymore advices guys?
Darkminus said:
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Click to expand...
Click to collapse
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Nipit said:
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
Click to expand...
Click to collapse
Same thing happened to me. After this, you shouldn't disconnect you wave, but to wait, and click search port again. If there is no port again, tru with different multiloader (mine was v5.65), and there is again same problem, try with another computer with preinstalled USB drivers.
The good thing is that your phone still enters boot mode. If it wasn't the case, then it would be a total brick.
Best regards
Nipit said:
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Click to expand...
Click to collapse
No, you didn't understand this flashing process. Most important thing here is to avoid interrupting of connection between computer and phone, even in serial port error. You need to search port again, or to change things that I mentioned above.
You hit download, then bootloader is loaded. It is absolutely normal in this algorithym to reset phone (wait reset). Then our error appears in port error. That is the time when you should click port search again, and when it finds it again (it will) click download button. Thats how it was in my case already 4 times.. Hope I helped.
Best regards
I have told that I reinstalled a lot of drivers and tried different PC's, nothing helps. I tried about 3 or 4 versions of multiloader still same result :/ I don't know what to do anymore... Please any advices? Maybe someone had the same issue?
I don't really know what happened. We switched our cables with my friend again, and I tried to flash with Nokia cable. And everything went okay for the 1 time. No errors, no nothing, no Unknown USB device problem. This is really strange. Thank you for you help friends :}
datta.ca said:
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
Click to expand...
Click to collapse
i have bricked my s5330 please help
no download mode or even recoverymode please help
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
[email protected] said:
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
Click to expand...
Click to collapse
Try to install driver manually from windows driver menu
Just installed "S8500-Driver-V5_02_0_0" now it's working since I wanted to flashback my friend's Wave from Bada2 to v1
hey guys,
im fairly new to this kind of topics, but i coulndt find anyone with my problem on the forums
here is the deal:
ive installed the abd drives onto my htc wildfire s, so i wanted to get it working with htcdev so i could put cwm on it.
but if i go into my bootscreen, and after that put in my usbcable in it, the red letters that should say "usb fastboot" according to instructions. but if i put in my cable it says "usb fastboot" then "fastboot", its a random thing, cause every time there is a different combination of times and durations it flickers. then after a random time of flickering it just changes to "fastboot" and stays that way until i replug the cable and the sceme start again. ive tried other cable but it still does the same.
ps: if im not in my bootscreen my device manger sees "andriod adb device" but when im in bootscreen my device manger calls it a "undetecteble usb device"
pc is running on 64x bit windows 8.1
pleas help if you know what to do with it,
greetz maarten
Fastboot is known not to work properly on Windows 8.1. But a solution has been posted, just follow the steps in the thread linked below.
http://forum.xda-developers.com/htc-wildfire-s/general/driver-finally-how-to-fastboot-to-t2857536
Click to expand...
Click to collapse
hi folks,
first time it happend to me with an adroid device, so i guess i ve missed something
i can t connect the watch to my computer on iwich i have no prob with all my other android device ans sony z2 & z3
in the device manage i keep having a yellow triangle warning, i ve re installed sony companion, changed nothing, and if i activate adb debut, it s not seing by the pc
i ve also tried different pc, and cables, so waving the white flag and asking for help!!!!!
thxx for your time
best regards
nocomp said:
hi folks,
first time it happend to me with an adroid device, so i guess i ve missed something
i can t connect the watch to my computer on iwich i have no prob with all my other android device ans sony z2 & z3
in the device manage i keep having a yellow triangle warning, i ve re installed sony companion, changed nothing, and if i activate adb debut, it s not seing by the pc
i ve also tried different pc, and cables, so waving the white flag and asking for help!!!!!
thxx for your time
best regards
Click to expand...
Click to collapse
Yep, I have the same issue. Its not being detected at all. I've troubleshooted this on linux. No udev events are emitted when the device is plugged in and on. A mass storage device is detected when I switch the device off though. I'm on 5.0.2.
Hi, I had this very problem and found that that you have to switch the watch off then attach the mini us to the watch only, then hold the power button of the watch (don't let go) and eventually the watch screen will come on with an attach usb picture, now plug the main usb end into the PC and it should be recognised by Sony PC companion. I forgot to mention that the PC companion program should be started before plugging it in. Good luck Grant.
hi grant, thxx a lot for your message
i tried that before and no luck :/
Hello guys!
Today i make a big mistake. I want to install CM 14 to my LG g3 . At first i can't go into TWRP . After 1 hour a somehow managed to boot in twrp but after formating the old os the phone is not responsing at all.
Things that i try:
I try to install a bootloader with ADB but the my pc cant recognise the device.
Things that the phone does:
There is no boot screen all it does is led and blue LED is blinking.
If i connect to the pc it recognise it as "Android " but i cant do nothing with it.
Please help me. Thank you
Did you try to connect in download mode and flash stock firmware with the official toolkit? I don't remember it's name though
Balino said:
Did you try to connect in download mode and flash stock firmware with the official toolkit? I don't remember it's name though
Click to expand...
Click to collapse
Yes of course but the pc diden't recognise the phone and it say its " not cot connected"
You need to install device drivers and ADB drivers before trying. Use USB 2.0 ports too, it's acting wired with 3.0 ones