It's downloading now... 1,390.16MB.
ryandinan said:
It's downloading now... 1,390.16MB.
Click to expand...
Click to collapse
Please let us know about the Build number, kernel version and security patch level. I sideloaded MM earlier and want to confirm if this is a new one! (probably it'll be)
apurva.giri said:
Please let us know about the Build number, kernel version and security patch level. I sideloaded MM earlier and want to confirm if this is a new one! (probably it'll be)
Click to expand...
Click to collapse
See attached image.
Theres any place like sammobile where I can download the mm firmware to flash with odin because I don't receive the OTA update, and if I check it manually my phone says is updated
saintx20 said:
Theres any place like sammobile where I can download the mm firmware to flash with odin because I don't receive the OTA update, and if I check it manually my phone says is updated
Click to expand...
Click to collapse
Here you go.
http://forum.xda-developers.com/att-galaxy-s6-edge-plus/general/mm-update-ota-version-g928aucu2bpd5-t3373689
G928A Update File Links
(5.1.1) S2APE3 -> (6.0.1) 2BPE6 Credit to: meek2100
https://xdmd.sl.attcompute.com/agent...3-to-U2BPE6-UP
----------------------------------------
Thank you very much i will try it....
I discovered last night, after my phone had installed the Marshmallow update and I was trying to get into the recovered to clear the cache, that when I accidentally hit power+home+volume DOWN - It loaded an Odin-based recovery that said "Warning. If you want to download a custom OS, press the volume up key, otherwise press the volume down key to cancel". Pressing volume up, it began downloading... something, with the message "No not turn off power to target device". Well, I did. Then quickly decided I didn't want whatever was downloading to finish! I held the home button down which finally turned the phone off (power did nothing).
The phone rebooted, and acted normally... But what the hell was that all about???
I did learn that the key sequence I was supposed to press to get to the option to clear the cache was power+home+volume UP.
ryandinan said:
I discovered last night, after my phone had installed the Marshmallow update and I was trying to get into the recovered to clear the cache, that when I accidentally hit power+home+volume DOWN - It loaded an Odin-based recovery that said "Warning. If you want to download a custom OS, press the volume up key, otherwise press the volume down key to cancel". Pressing volume up, it began downloading... something, with the message "No not turn off power to target device". Well, I did. Then quickly decided I didn't want whatever was downloading to finish! I held the home button down which finally turned the phone off (power did nothing).
The phone rebooted, and acted normally... But what the hell was that all about???
I did learn that the key sequence I was supposed to press to get to the option to clear the cache was power+home+volume UP.
Click to expand...
Click to collapse
It says that even if you are not plugged in and actually downloading something. That's the mode for using Odin.
Sent from my SAMSUNG-SM-G928A using XDA-Developers mobile app
Atomic Virus said:
Here you go.
http://forum.xda-developers.com/att.../mm-update-ota-version-g928aucu2bpd5-t3373689
G928A Update File Links
(5.1.1) S2APE3 -> (6.0.1) 2BPE6 Credit to: meek2100
https://xdmd.sl.attcompute.com/agent...3-to-U2BPE6-UP
----------------------------------------
Click to expand...
Click to collapse
Your second link requires a login and password. How are we supposed to use that link
Sent from my Nexus 6P using XDA-Developers mobile app
---------- Post added at 03:40 PM ---------- Previous post was at 03:36 PM ----------
joshua14 said:
It says that even if you are not plugged in and actually downloading something. That's the mode for using Odin.
Sent from my SAMSUNG-SM-G928A using XDA-Developers mobile app
Click to expand...
Click to collapse
Never mind someone else posted it and it worked. Thanks.
mattwheat said:
Your second link requires a login and password. How are we supposed to use that link
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
Sent from my Nexus 6P using XDA-Developers mobile app
Related
Hello guys !
I have done something terrible and phone is not booting up part recovery now.
I had rooted the phone with one-click universal method without any hasstles and then try to reboot into bootloader by pressing VolDown+Power button.
Eventually ended up rebooting in original android recovery. I tried rebooting with option in that but it was not responding.
While trying it out, I mistakenly wiped cache partition.
Now NO MATTER WHAT COMBINATION I TRY, phone doesn't boot up past the recovery.
Please help me sort out this mess. I need to sell the phone.
dev997 said:
Hello guys !
I have done something terrible and phone is not booting up part recovery now.
I had rooted the phone with one-click universal method without any hasstles and then try to reboot into bootloader by pressing VolDown+Power button.
Eventually ended up rebooting in original android recovery. I tried rebooting with option in that but it was not responding.
While trying it out, I mistakenly wiped cache partition.
Now NO MATTER WHAT COMBINATION I TRY, phone doesn't boot up past the recovery.
Please help me sort out this mess. I need to sell the phone.
Click to expand...
Click to collapse
If you don't mind maybe loosing data, LGNPST back to stock, and try again.
Sent from my LG-LS970 using xda app-developers app
I posted this in the other thread you asked about this in, but here it is:
I wipe my cache partition all the time. I am rooted but still locked (I don't think that will last much longer). Anyways, in the android recovery with jelly bean, I found that you no longer use the power button for selecting or confirming. It's now done using the menu button below your screen (on the right) . At least that's how it works for my phone.
I hope this works for you.
Sent from my LG-LS970
BadFish79 said:
I posted this in the other thread you asked about this in, but here it is:
I wipe my cache partition all the time. I am rooted but still locked (I don't think that will last much longer). Anyways, in the android recovery with jelly bean, I found that you no longer use the power button for selecting or confirming. It's now done using the menu button below your screen (on the right) . At least that's how it works for my phone.
I hope this works for you.
Sent from my LG-LS970
Click to expand...
Click to collapse
Thanks a million mate ! I was afraid I'd have to do a factory reset or some long process.
No problem. That's why we are here. To learn and ask questions.
Sent from my LG-LS970
BadFish79 said:
No problem. That's why we are here. To learn and ask questions.
Sent from my LG-LS970
Click to expand...
Click to collapse
Mate.. after getting the phone booted up I installed FreeGee app from Play store to get bootloader unlocked and flash recovery , but downloading recovery stopped due to an error. So I rebooted the phone and since then Wifi is not detecting my home wifi network.
I then tried to do erase cache partition and even factory reset but nothing helped.
Do u know what else I can do to get it right ?
Cheers !
I haven't fully unlocked my phone yet. Only rooted it. However it sounds like you might have to LGNPST to set things right. Maybe someone else that is more knowledgeable with this issue could chime in and correct me if I'm wrong, but I think that might be your only option.
Sorry I'm not of much help for you on this one.
Sent from my LG-LS970
dev997 said:
Mate.. after getting the phone booted up I installed FreeGee app from Play store to get bootloader unlocked and flash recovery , but downloading recovery stopped due to an error. So I rebooted the phone and since then Wifi is not detecting my home wifi network.
I then tried to do erase cache partition and even factory reset but nothing helped.
Do u know what else I can do to get it right ?
Cheers !
Click to expand...
Click to collapse
what phone u r ..try to flash back stock rom .. samsung use odin or moto use rsd ..
mb865 jb 4.2.2 paranoidAndroid
dev997 said:
Mate.. after getting the phone booted up I installed FreeGee app from Play store to get bootloader unlocked and flash recovery , but downloading recovery stopped due to an error. So I rebooted the phone and since then Wifi is not detecting my home wifi network.
I then tried to do erase cache partition and even factory reset but nothing helped.
Do u know what else I can do to get it right ?
Cheers !
Click to expand...
Click to collapse
If you're on zvb, try reinstalling the radio from here. http://forum.xda-developers.com/showthread.php?p=38750462
Sent from my LG-LS970 using xda premium
engine95 said:
If you're on zvb, try reinstalling the radio from here. http://forum.xda-developers.com/showthread.php?p=38750462
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
I don't have my bootloader unlocked , so no twrp installed. So can't flash anything.
BadFish79 said:
I haven't fully unlocked my phone yet. Only rooted it. However it sounds like you might have to LGNPST to set things right. Maybe someone else that is more knowledgeable with this issue could chime in and correct me if I'm wrong, but I think that might be your only option.
Sorry I'm not of much help for you on this one.
Sent from my LG-LS970
Click to expand...
Click to collapse
I want to try this option , but I'm not able to boot into download mode. I tried the Volup+down and then power button combo but phone just boots up , don't go to download/bootloader.
dev997 said:
I don't have my bootloader unlocked , so no twrp installed. So can't flash anything.
I want to try this option , but I'm not able to boot into download mode. I tried the Volup+down and then power button combo but phone just boots up , don't go to download/bootloader.
Click to expand...
Click to collapse
hold the vol up+down while plugging the phone into the comp instead of pressing the power button. that should work
dev997 said:
I want to try this option , but I'm not able to boot into download mode. I tried the Volup+down and then power button combo but phone just boots up , don't go to download/bootloader.
Click to expand...
Click to collapse
Make sure the phone is plugged into the computer before trying to get into download mode. :beer:
Sent from my LG-LS970
javskies said:
hold the vol up+down while plugging the phone into the comp instead of pressing the power button. that should work
Click to expand...
Click to collapse
Thanks alot mate.. Now I can get into download mode with your trick.
Cheers
Need one last help .. Can u guy please provide links to reliable download site for LGNPST and stock rom.
I tried downloading them from here: http://www.lg-phones.org/how-to-return-sprint-lg-optimus-g-back-to-stock.html
But as its on Dropbox/Box there is no multisources nor resume capability and download always stops abruplty.
Any good mirrors/links will be highly appreciated.
Cheers
Dev
Go to this post. http://forum.xda-developers.com/showthread.php?p=40169203
Scroll down to "Additional info", click the"Show" button. It'll get you going with LGNPST and how to use it.
Sent from my LG-LS970 using xda premium
engine95 said:
Go to this post. http://forum.xda-developers.com/showthread.php?p=40169203
Scroll down to "Additional info", click the"Show" button. It'll get you going with LGNPST and how to use it.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Thanks mate.. will try this
OK.. mate I tried the LGNPST method. Downloaded LGNPST and stock v9 bin file. Used it to flash the stock rom back to stock.
howvere even after full completion of the process without any errors , the phone stucks at LG logo forever. I have tried the process twice.
Is there something I might have missed. I followed the instruction to the line from the pastebin link. Do we have a different Dll for the stock rom then whats there in the LGNPST repository named LS970_LGNPST.dll or something ?
Hopefully this will get you going.
If you downgraded from ZVB to ZV9 heres some needed info:
If you're stuck at the 4glte screen: To get to stock recovery - Power off phone. You need to hold power button for about 20 sec to get it to turn off. Then press and hold vol down+power - The LG logo will come on, then the capacitive lights. Immediatly let go when the capacitive lights turn on.
It takes a few seconds to work. Data wipe/Factory reset. Reboot.
And if you happen to reboot into recovery after this upgrade? Use the "menu" button on the led lights (far right when holding it) to get it to accept your commands. power button won't work.
---------- Post added at 09:14 AM ---------- Previous post was at 09:08 AM ----------
If that doesn't work try this.
Get into DL mode and run "teeny bin" from the post I sent you to, to get LGNPST. Try the main one first, then the optional one if it still doesn't get you into TWRP. You just might have one of those "haunted phones" that seem to be poping up.
engine95 said:
Hopefully this will get you going.
If you downgraded from ZVB to ZV9 heres some needed info:
If you're stuck at the 4glte screen: To get to stock recovery - Power off phone. You need to hold power button for about 20 sec to get it to turn off. Then press and hold vol down+power - The LG logo will come on, then the capacitive lights. Immediatly let go when the capacitive lights turn on.
It takes a few seconds to work. Data wipe/Factory reset. Reboot.
And if you happen to reboot into recovery after this upgrade? Use the "menu" button on the led lights (far right when holding it) to get it to accept your commands. power button won't work.
---------- Post added at 09:14 AM ---------- Previous post was at 09:08 AM ----------
If that doesn't work try this.
Get into DL mode and run "teeny bin" from the post I sent you to, to get LGNPST. Try the main one first, then the optional one if it still doesn't get you into TWRP. You just might have one of those "haunted phones" that seem to be poping up.
Click to expand...
Click to collapse
Thanks again mate.. I was able to install Teeny bin and then flashed a AOSP rom. Now I have my wifi working again without any issues.
Do u have a link of any stock based rooted deodexed rom for this ? I don't want to flash bin images via LGNPST but want the stock look and feel
Imperium and Lifeless are our only 2 stock ROMs so far. In the Development section. Both are very nice.
Sent from my LG-LS970 using xda premium
Hey there guys- pretty sure this isn't already posted, but apologies if it is.
Anyway, I bought a used NoteII recently, and there seems to be some weird stuff going on. I recently tried accessing download mode, but each time I do I get kicked into the stock recovery. (There's a little android on it's back with a red triangle with an exclamation mark on it if that helps)
I've also tried using Kies to restore, but after using Firmware Upgrade and Initialization, it says that my device doesn't support that.
Any help is appreciated!
BG64 said:
Hey there guys- pretty sure this isn't already posted, but apologies if it is.
Anyway, I bought a used NoteII recently, and there seems to be some weird stuff going on. I recently tried accessing download mode, but each time I do I get kicked into the stock recovery. (There's a little android on it's back with a red triangle with an exclamation mark on it if that helps)
I've also tried using Kies to restore, but after using Firmware Upgrade and Initialization, it says that my device doesn't support that.
Any help is appreciated!
Click to expand...
Click to collapse
Pull the battery and wait maybe 5min before reinserting it then hold volume down + power + home keys at the same time til it takes you into download mode
Sent from my SGH-T999 using xda premium
LuigiBull23 said:
Pull the battery and wait maybe 5min before reinserting it then hold volume down + power + home keys at the same time til it takes you into download mode
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Nope. Nothing. Still get the Stock Recovery menu.
All I want to do it revert back to stock.
From the stock recovery menu, I can apply an update.zip; could I just flash a stock zip?
If you have an external sd card, yes.
Sent from my SGH-T999 using xda premium
You might also try the tool found in this thread. It will get you back to stock and can help you move ahead with rooting etc when you decide to again.
Hello, I just got my note 3 the other day and I just love it. I just want to be able to get the most out of it that I can. I decided I wanted to root it and put a custom rom on it. I wanted to put the rom wicked because it just looks amazing. Anyways I tried following this tutorial /watch?v=A6qt8sSTKYI (cant post full link) The last step where I had to hold the home, power, and volume up I messed up a bit. I am not sure if it is because I didn't hold them down long enough or what but it didn't work. So when I got back to my phones setting I wanted to factory reset it to start from scratch. When I tried this the phones powers off and then when it powers back on I am stuck in odin mode. The ONLY way I was able to get out of it was taking out the battery for a few secs. Put the battery back in, held down the down volume, home, and power button. Then when that menu came up it said press up to continue or down to cancel or reset. If I pressed up I would be stuck in the odin mode again. When I pressed down the phone then booted fine which was a big relief.
I am just wondering what I did wrong. I really would like to factory restore it before attempting the root again. Maybe this time I can have someone help me on skype? If you are willing to help me that would be wonderful. I will PM you my skype and it will be just through text no voice.
Thank you in advance
I'm just guessing but perhaps you need to just go ahead and flash stock firmware through Odin. Your files or partitions may have got messed up somehow. Its pretty simple. Goto dev section and read up on it. Gonahead and download the files and research while downloading so less wait time.
sent from my sm-9005.
@rbiter said:
I'm just guessing but perhaps you need to just go ahead and flash stock firmware through Odin. Your files or partitions may have got messed up somehow. Its pretty simple. Goto dev section and read up on it. Gonahead and download the files and research while downloading so less wait time.
sent from my sm-9005.
Click to expand...
Click to collapse
Thank you, I will try this now. Hopefully this will work for me and not leave me stuck on odin mode again. I just tried to boot into recovery and I still get stuck in odin (cant boot normal). By the way does 0x1 mean I void my warranty? Just curious
FlutterPie said:
Thank you, I will try this now. Hopefully this will work for me and not leave me stuck on odin mode again. I just tried to boot into recovery and I still get stuck in odin. By the way does 0x1 mean I void my warranty? Just curious
Click to expand...
Click to collapse
Yes, flashing anything will get the ticker to 0x1.(although I heard from some people, you CAN reset it, but it's not solid yet)
Now as far as getting to RECOVERY, it's volume UP, home and power, not down. down is download mode, up is recovery. Hope it helps.
---------- Post added at 08:56 PM ---------- Previous post was at 08:52 PM ----------
also, in order to start anything on a brand new device that not rooted yet, you have to install the root BY going through odin, at that point you should google root note 3 and go to the website(which i cant access im at work) is rootgalaxynote3.com. he has the files you need and tutorials to root, AT THAT POINT install goo manager and install recovery, which you need root access to do. when thats done, you can get into TWRP recovery by holding down in this sequence: volume UP,home,power(always hold down power last to make sure it recognizes you holding down the other two buttons) at that point youre all set to flash!
@rbiter said:
I'm just guessing but perhaps you need to just go ahead and flash stock firmware through Odin. Your files or partitions may have got messed up somehow. Its pretty simple. Goto dev section and read up on it. Gonahead and download the files and research while downloading so less wait time.
sent from my sm-9005.
Click to expand...
Click to collapse
Inxed said:
Yes, flashing anything will get the ticker to 0x1.(although I heard from some people, you CAN reset it, but it's not solid yet)
Now as far as getting to RECOVERY, it's volume UP, home and power, not down. down is download mode, up is recovery. Hope it helps.
---------- Post added at 08:56 PM ---------- Previous post was at 08:52 PM ----------
also, in order to start anything on a brand new device that not rooted yet, you have to install the root BY going through odin, at that point you should google root note 3 and go to the website(which i cant access im at work) is rootgalaxynote3.com. he has the files you need and tutorials to root, AT THAT POINT install goo manager and install recovery, which you need root access to do. when thats done, you can get into TWRP recovery by holding down in this sequence: volume UP,home,power(always hold down power last to make sure it recognizes you holding down the other two buttons) at that point youre all set to flash!
Click to expand...
Click to collapse
I tried both volume down and up.
Or goto dev section and download files needed for sm-900t then move on to goo.manager.
Sent from my SM-9005.
@rbiter said:
Or goto dev section and download files needed for sm-900t then move on to goo.manager.
Sent from my SM-9005.
Click to expand...
Click to collapse
I currently am downloading the stock rom. Cant I just follow these instructions?
"1.. Download .tar and Odin to pc (move to desktop)
2.. Extract .zip N900TUVUBMI7_N900TTMBBMI7_TMB-1.zip
3..Run odin as administrator (left click on odin.exe)
4. Put phone into download mode..With phone off press Volume down + home and power (press power button last) ..now press..volume up to enter dl mode..
5.. Connect phone to pc... Wait till drivers install. when completed youll see a yellow ID:COM box light up...
6.. Click on pda and open N900TUVUBMI7_N900TTMBBMI7_N900TUVUBMI7_HOME.tar.md 5. ( If you did like i said it will be on you desktop. )
7 Patience......... "
If someone wanted to help me on skype that would be wonderful ahah. I just want to make sure I dont screw up again or even worse brick it.
FlutterPie said:
I currently am downloading the stock rom. Cant I just follow these instructions?
"1.. Download .tar and Odin to pc (move to desktop)
2.. Extract .zip N900TUVUBMI7_N900TTMBBMI7_TMB-1.zip
3..Run odin as administrator (left click on odin.exe)
4. Put phone into download mode..With phone off press Volume down + home and power (press power button last) ..now press..volume up to enter dl mode..
5.. Connect phone to pc... Wait till drivers install. when completed youll see a yellow ID:COM box light up...
6.. Click on pda and open N900TUVUBMI7_N900TTMBBMI7_N900TUVUBMI7_HOME.tar.md 5. ( If you did like i said it will be on you desktop. )
7 Patience......... "
Click to expand...
Click to collapse
Yeah that's good. Let us know what happens. That will stock your phone to out of the box. THEN Odin install the root.
Well, That seems to have worked very nicely
After I did what I said above I was able to factory reset without a problem. NOW, before I go ahead and screw up again what procedures should I take exactly? I was having problems when in the videos they where saying clockworkmod. I had the rom manager and then it wanted me to pick a recovery or something and I was confused. Any tips?
Goto the twrp thread and DL 2.6.3.7. Flash that and start flashing.
Sent from my SM-9005.
@rbiter said:
Goto the twrp thread and DL 2.6.3.7. Flash that and start flashing.
Sent from my SM-9005.
Click to expand...
Click to collapse
where is this twrp thread? What section?
Also I wanted to thank everyone for their help. Very much appreciated.
FlutterPie said:
where is this twrp thread? What section?
Also I wanted to thank everyone for their help. Very much appreciated.
Click to expand...
Click to collapse
No problem. Hit the thanks if we helped lol. if you gogle team win project, their website will be the first one there. just select your device and download ad install.
Inxed said:
No problem. Hit the thanks if we helped lol. if you gogle team win project, their website will be the first one there. just select your device and download ad install.
Click to expand...
Click to collapse
I am in GooManager and when I click install openrecoveryscript it says "No recoveries were found for your device"
I really have no idea what to do now. Does this mean I am stuck until a recovery is found for my device?
Did you download and install twrp from the team win project website?
Inxed said:
Did you download and install twrp from the team win project website?
Click to expand...
Click to collapse
If you are talking about goomanager yes
So in goomanager there are no recoveries found and in rom manager there is no clockworkmod recovery for the note 3. Im going crazy here.
Theres gotta be a recovery for your phone. That is crazy that there s not. Hold on
Inxed said:
Wait nevermijd sorry. What device are you trying this on...
Click to expand...
Click to collapse
I get android system recovery but its no goomaster or rom manager recovery. My recovery screen has a dead android guy and a few option above him.
Inxed said:
Did you download and install twrp from the team win project website?
Click to expand...
Click to collapse
What note 3 is this is it T-Mobile?
after I tried unsuccesfull to Install a custom rom I got this msg and my lg pad wont start anymore...
can any1 help me pls? see Image at attachments.
No attachment. Do you get LG logo and bootloop? If so, don't worry mate.
CuraeL said:
No attachment. Do you get LG logo and bootloop? If so, don't worry mate.
Click to expand...
Click to collapse
there Is now. pls help me mate
Aha, did you use the wrong recovery? I'm gonna take a blind-shot and think that you did. ;/ So maybe you cannot flash CM on it. It is common mistake. - What you are seeing right now is the stock LG charging pre-system. I think you have wiped the image from the system, so it shows you the RAW data instead.
Well, let it charge to 20-25%
Then do this:
1. Unplug the tablet from charger and let it turn fully off.
2. Press and HOLD Volume Down + Power Button.
3. On LG Logo appear, ONLY release Power key, still holding Volume Down. Then quickly press and hold Power and Volume UP also. So now you hold all three buttons. So you need three fingers.
This should take you to "Factory Reset", but when you have custom recovery, you can press Power and you will come to custom recovery. I think you can mount the external SD card and then flash a new recovery. Go find PhilZ recovery in the Original Android Development sub-forum here. You just flash the Zip inside of TWRP. When that is done, reboot and repeat the steps on the top of this post, then flash CM.
Keep on trying the key combo, it is a bit tricky, but it works. While you try and get to recovery, download PhilZ CWM touch and prepare the SD card on your computer, if you have the option.
Good luck.
CuraeL said:
Aha, did you use the wrong recovery? I'm gonna take a blind-shot and think that you did. ;/ So maybe you cannot flash CM on it. It is common mistake. - What you are seeing right now is the stock LG charging pre-system. I think you have wiped the image from the system, so it shows you the RAW data instead.
Well, let it charge to 20-25%
Then do this:
1. Unplug the tablet from charger and let it turn fully off.
2. Press and HOLD Volume Down + Power Button.
3. On LG Logo appear, ONLY release Power key, still holding Volume Down. Then quickly press and hold Power and Volume UP also. So now you hold all three buttons. So you need three fingers.
This should take you to "Factory Reset", but when you have custom recovery, you can press Power and you will come to custom recovery. I think you can mount the external SD card and then flash a new recovery. Go find PhilZ recovery in the Original Android Development sub-forum here. You just flash the Zip inside of TWRP. When that is done, reboot and repeat the steps on the top of this post, then flash CM.
Keep on trying the key combo, it is a bit tricky, but it works. While you try and get to recovery, download PhilZ CWM touch and prepare the SD card on your computer, if you have the option.
Good luck.
Click to expand...
Click to collapse
thanks for your reply.
yes I did use the wrong recovery, as a matter of fact I didnt know which one to use so I choose one randomly
the bad thing I did what u said. and nothing happened .. still stuck at the lg logo and Is not charging anymore...
Keep on trying the key combo. Hold power + volume down, when logo comes, release power, still hold volume down, then also hold power and volume up, so you hold all 3 buttons. But never release volume down.
CuraeL said:
Keep on trying the key combo. Hold power + volume down, when logo comes, release power, still hold volume down, then also hold power and volume up, so you hold all 3 buttons. But never release volume down.
Click to expand...
Click to collapse
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
ANTRIK said:
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
Click to expand...
Click to collapse
No custom recovery. Hn, we must do another thing then, wait a second. I must find a text and copy it to you from another post, brb. We must go to download mode instead when no recovery.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and THEN A TEAM RECOVERY STARTS AGAIN AND LG LOGO STUCK AGAIN
ANTRIK said:
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
Click to expand...
Click to collapse
Here is quote from someone else I found in another place but shutdown the thread without thinking.
I use the download mode to install the original official rom.
1. Download the LG MOBILE SUPPORT TOOL by this link:http://www.lg.com/us/support-mobile/lg-V500-White
2. install the software in computer, Plug in USB cable with computer, Open the software LG MOBILE SUPPORT TOOL.
3. Turn off Pad and unplug.
4. press hold both volume up and volume down, Then plug in usb cable, And then pad is in downlaod mode
5. USB driver will be insatlled automatically
6. In LG MOBILE SUPPORT TOOL, click option---.country and language-OK, then click option--upgrade recovery
7. It will installe original official rom automatically.
8. After about 1.5 hours, The pad will be installed the last official room.
^ This is a quote and now I shut down the thread, sorry, don't know who said it, just got stoked when I saw it.
---------- Post added at 03:17 PM ---------- Previous post was at 03:13 PM ----------
ANTRIK said:
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and THEN A TEAM RECOVERY STARTS AGAIN AND LG LOGO STUCK AGAIN
Click to expand...
Click to collapse
What? You got recovery booted but it restarted itself again to LG screen? If you can, just stay in recovery.
CuraeL said:
No custom recovery. Hn, we must do another thing then, wait a second. I must find a text and copy it to you from another post, brb. We must go to download mode instead when no recovery.
Click to expand...
Click to collapse
lol I was there
download mode please do not uplug...
but I turned It off
dont know how do I get there ;p
ANTRIK said:
lol I was there
download mode please do not uplug...
but I turned It off
dont know how do I get there ;p
Click to expand...
Click to collapse
Click on PC SYNC and download the only file, PC Suite, it has program in it. Then follow guide.
http://imgur.com/kzHc2sa
CuraeL said:
Click on PC SYNC and download the only file, PC Suite, it has program in it. Then follow guide.
http://imgur.com/kzHc2sa
Click to expand...
Click to collapse
thank you so much man you saved my life
I did everything u said and Its working again .
In order to Install cm11 which recovery should I use? I used this one before twrp 2.6.3.0.img awifi
ANTRIK said:
thank you so much man you saved my life
I did everything u said and Its working again .
In order to Install cm11 which recovery should I use? I used this one before twrp 2.6.3.0.img awifi
Click to expand...
Click to collapse
Go into http://forum.xda-developers.com/showthread.php?t=2551499 and scroll down to downloads.
You are on stock ROM, meaning you wanna go and check in your system settings - about tablet for the software information. Choose one of the three: V50010a, V50010c or V500e. Download the right one for your device. Then a few lines lower, download "Loki" from the link.
Enable developer settings in your Tablet and follow the adb instructions in the thread. This is the TWRP you need to flash a KitKat rom. The older versions will fck up your device. - Remember to root before you begin!
CuraeL said:
Go into http://forum.xda-developers.com/showthread.php?t=2551499 and scroll down to downloads.
You are on stock ROM, meaning you wanna go and check in your system settings - about tablet for the software information. Choose one of the three: V50010a, V50010c or V500e. Download the right one for your device. Then a few lines lower, download "Loki" from the link.
Enable developer settings in your Tablet and follow the adb instructions in the thread. This is the TWRP you need to flash a KitKat rom. The older versions will fck up your device. - Remember to root before you begin!
Click to expand...
Click to collapse
hey man thanks for ur reply.
so far we are In the same page
I downloaded v50010a which Is my devIce then loki zip
but I have no Idea what Is cdm and adb I tried to open cmd and run thoose commands but I getting eroor adb not support something like that.
although I download adb.exe and fastbook and Installed It.
Is It any way to flash recovery though my tablet like goo apps or rom manager ?
thanks.
Go here, http://forum.xda-developers.com/showthread.php?t=2553192
Read first post, donwload and enable developer options on Tablet.
Then download and run the .bat file. Then you get root.
Then you go download the V50010a.lok file and you rename the file to V50010a.img instead.
Then you go to market on phone and search for "Flashify", and you flash the .img in there. (I don't use it, but many people does.)
I recommend you study a bit on adb and fastboot for another time, since if anything crashes, adb is the way to go. Not Flashify. But for now Flashify GUI should be fine. Just remember the root first.
This is the last question I will help you with since all of your questions has been in other threads and you should be able to find them in the forums.
CuraeL said:
Go here, http://forum.xda-developers.com/showthread.php?t=2553192
Read first post, donwload and enable developer options on Tablet.
Then download and run the .bat file. Then you get root.
Then you go download the V50010a.lok file and you rename the file to V50010a.img instead.
Then you go to market on phone and search for "Flashify", and you flash the .img in there. (I don't use it, but many people does.)
I recommend you study a bit on adb and fastboot for another time, since if anything crashes, adb is the way to go. Not Flashify. But for now Flashify GUI should be fine. Just remember the root first.
This is the last question I will help you with since all of your questions has been in other threads and you should be able to find them in the forums.
Click to expand...
Click to collapse
YES! YES! YES!
I did It Installed cm11
thanks man for your time!
u know good things happen to good people. and u re a good guy
god will reward you!
thanks.
ANTRIK said:
YES! YES! YES!
I did It Installed cm11
thanks man for your time!
u know good things happen to good people. and u re a good guy
god will reward you!
thanks.
Click to expand...
Click to collapse
Happy to help, see you on the forums.
So yea, I'm an idiot, was trying to do a factory reset because I was having trouble with my root and was going to start over and accidentally deleted everything including the internal storage, now it just boots into the google screen and doesn't go any further. Is there anyway to fix it or am I out of luck? I can't turn the phone off either, it is just stuck on the loading screen.
What brand is your device??
Sent from my SM-J110H using XDA Forums
anongzr said:
What brand is your device??
Sent from my SM-J110H using XDA Forums
Click to expand...
Click to collapse
LG
Edit: the model is the LG-H790
Re-install your rom using pc i dont know much about lg but hey its an android so its got to work
Sent from my SM-J110H using XDA Forums
anongzr said:
Re-install your rom using pc i dont know much about lg but hey its an android so its got to work
Sent from my SM-J110H using XDA Forums
Click to expand...
Click to collapse
You mean do something like this?
Sorry for my ignorance I am just beginning to learn about the rooting process.
SeymourOmnis said:
You mean do something like this?
Sorry for my ignorance I am just beginning to learn about the rooting process.
Click to expand...
Click to collapse
Yep but do not use any other models rom it will only add more problems p.s everyones a learner i mean look at me you managed to root your device but im still stuck googling on how to root mine
Sent from my SM-J110H
---------- Post added at 12:06 AM ---------- Previous post was at 12:01 AM ----------
Happy flash ? away
Sent from my SM-J110H
SeymourOmnis said:
So yea, I'm an idiot, was trying to do a factory reset because I was having trouble with my root and was going to start over and accidentally deleted everything including the internal storage, now it just boots into the google screen and doesn't go any further. Is there anyway to fix it or am I out of luck? I can't turn the phone off either, it is just stuck on the loading screen.
Click to expand...
Click to collapse
Just for ease and simplicity (to ease your mind) use this tool and go back to complete stock and start over.
Once you've done that read this and thank everyone especially @Heisenberg
1. Download platform-tools, it's in android sdk. You don't have to download the whole sdk pack.
2. unzip platform-tools , and unzip the official img file on your pc.
3. connect phone and pc, flash the official img
sadly , you may lost your data.
Hold the power button for a long time. It should stop the phone (and start it in a second), stuck in Google screen again; that's okay. While the screen is off, hold the Power + Volume Down buttons. Don't release them until you get in the bootloader. You will see a green android lying down with a bunch of options. From there you can flash factory images, continue root or do anything you wish.
if you can reboot into recovery, you can flash everything from there. Press and hold power + vol down for 10 sec to go into bootloader and select recovery from there.
If you somehow ALSO wiped recovery, use ADB following the Nexus 5X how to root etc thread
PS, your data is all gone if you wiped sys and internal storage,