Hi all, just wanted to know is there a way to convert twrp-3.0.2-0-t0ltetmo.img to a tar or is there way to install this version all i know is using odin but only reads tar and no img. I'm using rooted sgh-t889.
You can flash an earlier version of the TWRP tar in Odin and them install the TWRP img file from TWRP.
You could also use Cygwin (https://www.cygwin.com/) to accomplish the task of converting img to tar.
besusanameeva said:
Hi all, just wanted to know is there a way to convert twrp-3.0.2-0-t0ltetmo.img to a tar or is there way to install this version all i know is using odin but only reads tar and no img. I'm using rooted sgh-t889.
Click to expand...
Click to collapse
https://dl.twrp.me/t0ltetmo/twrp-3.0.0-1-t0ltetmo.img.tar.html
Related
I want to flash a modem with mobile odin since I am not using a repack kernel. I didn't find a tar file but I found a zip file. Can I extract the modem.bin and then in mobile odin lite select modem and browse to where the modem.bin is and select it and then flash? Or does it have to be a tar file? I am new to mobile odin but I really like it.
Well normally you would pull the modem.bin file out of the ZIP and flash it, but it won't work on our phone. I haven't been able to get a single modem.bin file or any of Calk's modem TAR files to flash in Mobile Odin. It just goes through the motions. Supposedly it will flash the modem from a full TAR image though.
Sent from my SPH-D710 using Tapatalk
Thanks for the info. I guess I will Odin the repack with recovery and flash the modem and flash the stock kernel back then.
ElAguila said:
Thanks for the info. I guess I will Odin the repack with recovery and flash the modem and flash the stock kernel back then.
Click to expand...
Click to collapse
If for some reason you don't like the repacks, you can also install the stock FB27 zImage and it should flash the modems (they ignore signature failures in FB27 stock recovery) Same number of steps as installing a CWM repack except you will always be running pure stock software (I figure there must be a reason you haven't installed a CWM repack already)
How to ? Mobile Odin cannot recognize the modem.bin file, it's only recognize the .tar file
supercjlee said:
How to ? Mobile Odin cannot recognize the modem.bin file, it's only recognize the .tar file
Click to expand...
Click to collapse
Though I don't use it, I believe Mobile ODIN recognizes modem.bin and tar. It just doesn't flash modem.bin on CDMA systems.
Flashing the modem with the actual odin does not raise any flash counters or cause any yellow triangles. Why not just do it thru odin?
im0rtalz said:
Flashing the modem with the actual odin does not raise any flash counters or cause any yellow triangles. Why not just do it thru odin?
Click to expand...
Click to collapse
Convenience mainly.
Sent from my SPH-D710 using Tapatalk 2
Noob here, hi xda. I downloaded a rom in a multizip file. Is there any possible i can flash ot to odin by making or by building a tar file on a windows pc? Please guide me how. Just want to flash it on my rooted shv-e110s because i accidentally unistall its stock app. Im on ics 4.0.4.
In order to save my phone, I need the modem flash for file t889 that can be used with Odin and not CWM. Please advise.
Unzip CWM version , you will have Zimage ( Odin file). If I'm not wrong.
simplelife said:
Unzip CWM version , you will have Zimage ( Odin file). If I'm not wrong.
Click to expand...
Click to collapse
thanks for the suggestion. However, in the zip file there's the modem.bin, and the flash_image file and a folder with other stuff. I am uncertain which one to extract. (yes, I am googling this as I ask.)
the modem.bin file is the one you need. would you mind posting a link to the CWM zip you have of the modem? been looking for it..
My experience with Odin and modem cross-flashing is that is fails before writing anything. (T889-LJ1 on T889, T889V-LJ4 on T889V and so on should work. Other partitions made with this method work flawlessly, so I'm guessing there's an additional check in the bootloader for modem images.)
Anyway, here goes. Those files were made by extracting from their respective Odin images, from Sammobile and tarring with the Cygwin tar binary.
SGH-T889V T889VVLALJ4 Odin-flashable modem image: http://www.mediafire.com/?1ielxoreoyc4nbm
Goodbye,
Darkshado
Can dis modem work with t889UVUCMK7 ? I need it badly anybody tell ? Thanks
damabib said:
Can dis modem work with t889UVUCMK7 ? I need it badly anybody tell ? Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2564430
mk7 modem
want to go back to rooted stock and all the files i find searching are .tar
i need a zip i can flash in recovery mode.
Galaxy S3 AT&T i747
[email protected] said:
want to go back to rooted stock and all the files i find searching are .tar
i need a zip i can flash in recovery mode.
Galaxy S3 AT&T i747
Click to expand...
Click to collapse
Have you seen this one: http://forum.xda-developers.com/showthread.php?t=2034844
[email protected] said:
want to go back to rooted stock and all the files i find searching are .tar
i need a zip i can flash in recovery mode.
Click to expand...
Click to collapse
You can use the TAR file to flash a stock ROM on your phone using ODIN on your PC, with your phone in Download mode. For example, mrRobinson's pre-rooted stock ROMs are to be flashed using ODIN.
(But yes, if you flash a mrRobinson's stock ROM using ODIN [or an original stock ROM], it will overwrite your custom recovery with the stock one, so you would have to reinstall a custom recovery once the rooted stock ROM is flashed.)
I have the latest full stock base for the Galaxy Tab Pro 12.2 Wifi (SM-T900) and want to make a bootloader package that can be flashed in ODIN.
Inside of the full stock tar file is:
boot.img
recovery. img
system. img
cache.img
hidden.img
sboot.bin
Which is the bootloader, and what do I need to do to the file, if anything, so that it can be flashed individually in ODIN? Also, should there be a modem file? Alternatively, is it possible to create a zip of these things (bootloader, modem) that's flashable in TWRP?
Thanks in advance for any help.
trav06 said:
I have the latest full stock base for the Galaxy Tab Pro 12.2 Wifi (SM-T900) and want to make a bootloader package that can be flashed in ODIN.
Inside of the full stock tar file is:
boot.img
recovery. img
system. img
cache.img
hidden.img
sboot.bin
Which is the bootloader, and what do I need to do to the file, if anything, so that it can be flashed individually in ODIN? Also, should there be a modem file? Alternatively, is it possible to create a zip of these things (bootloader, modem) that's flashable in TWRP?
Thanks in advance for any help.
Click to expand...
Click to collapse
I'm not quite sure which one is bootloader. Sometimes you can't flash each one individual ly with odin(ex like creating an odin tar that just has system). Modem files are only on lte devices. Most times you don't need them for custom roms. Anyway, you can extract each IMG and create and tar the IMG up. There are a few commands and guides to tar something and add md5 to them.
As for a flash able zip yes and no. Bootloader can't be flashed in twrp most times since I have never seen anything like that. You usually have to flash bootloader with odin. Modems don't need to be flashed since twrp doesn't mess with it most times. But you can create an flash able zip of kernel, recovery and I'm unsure of system.img(may need to extract or adjust updater scipt. Though I dont fully know).
Usually the twrp flashable in ArchiKitchen so it can help with the updater scipt stuffs. Just don't add any options such as root and busybox to it. I've never seen a flashable bootloader in twrp so it's highly unlikely of it being possible.
Hope this helps!
trav06 said:
I have the latest full stock base for the Galaxy Tab Pro 12.2 Wifi (SM-T900) and want to make a bootloader package that can be flashed in ODIN.
Inside of the full stock tar file is:
boot.img
recovery. img
system. img
cache.img
hidden.img
sboot.bin
Which is the bootloader, and what do I need to do to the file, if anything, so that it can be flashed individually in ODIN? Also, should there be a modem file? Alternatively, is it possible to create a zip of these things (bootloader, modem) that's flashable in TWRP?
Thanks in advance for any help.
Click to expand...
Click to collapse
Hi
The bootloader tar package for flashing in ODIN:
1) boot.img
2) sboot.bin
Use 'Total Commander' (google it) to make tar package (bootloader).
Any luck with the port?
shayind4