Related
HI,
I have been flashing roms one after another first it was stock, it started to loop at bootscreen after flashing recovery and s-off.
I flashed Cyanogen Mod 7. It worked for a week and again looped on bootscreen.
then I flashed leedriod, which was working fine till last night. At morning when i woke up. my cell was off. when i started it it was stuck at bootscreen.
To avoid all this i flashed orginal RUU directly on MILDWILD. right now my HTC desire is unroot, and is without any rom and has no recovery installed on it.
I am unable to understand what should i do. How to install a recovery without a rom ? or how to install a rom without recovery? any suggestions?
Are you s-on?
If yes, flash the RUU in my sig using the PB99img method, then s-off with revolutionary.
If not, then install a recovery through fastboot.
How?
abaaaabbbb63 said:
Are you s-on?
If yes, flash the RUU in my sig using the PB99img method, then s-off with revolutionary.
If not, then install a recovery through fastboot.
Click to expand...
Click to collapse
How to do that?
I have no rom, a twrp recovery, S-Off, BUT, my recovery haves a flashing problem, so my phone is bricked for my feelings
EDIT:
Fixed It!
:crying:
TheHunterNL said:
How to do that?
I have no rom, a twrp recovery, S-Off, BUT, my recovery haves a flashing problem, so my phone is bricked for my feelings
EDIT:
Fixed It!
:crying:
Click to expand...
Click to collapse
you can try flash recovery by USB using fastboot
Fixed It
bl0ndynek said:
you can try flash recovery by USB using fastboot
Click to expand...
Click to collapse
I fixed it with a random PB99IMG CWM. But if i tried to flash a recovery using adb and fastboot it would have worked too
i have htc one m8 verizon soff (unlock bootloader ) and all.
i install rom in recovery twrp.
after the install i reboot device and this my error:
unfortunately the process com.android.systemui has stopped...
thanks.
i need to change cid to install this rom?
Check the md5 of the rom to see if its corrupt.
5600
x714x said:
Check the md5 of the rom to see if its corrupt.
Click to expand...
Click to collapse
what is md5? how i check this?
the phone no turn on. i should go to viper rom..
i need to change my cid to supercid? (i want to delete all of verzion)
Honestly if you don't know the basics then why mess with the device? Google is your friend.
x714x said:
Honestly if you don't know the basics then why mess with the device? Google is your friend.
Click to expand...
Click to collapse
I did everything to the device, but I never checked MD5.
The first time learners.
EDIT: i checked and the codes match.
what now?
Is a verizon device can run this rom without changing CID?
I do not believe .....!
I deleted everything in RECOVERY what can I do now ...
I have no system on the device and the device does not connect to my computer!
You need to sideload a rom to the phone via adb. Or get the RUU for you device and revert to stock. There is also a thread with stock backups that you can throw on a sdcard and restore via recovery.
feemed akiesja
x714x said:
You need to sideload a rom to the phone via adb. Or get the RUU for you device and revert to stock. There is also a thread with stock backups that you can throw on a sdcard and restore via recovery.
Click to expand...
Click to collapse
thank you!!!
its work. the phone is work.
i flash in external sd card the arhd rom.
thanks!
I originally had a stock sense M8 (bought it first day) but since October, I changed my phone to GPE (GPE Firmware and everything) and have been using 5.0 eversince using SkyDragon rom. Ran into issues a few weeks ago, and i've been waiting hard to go back to sense and use the newer 5.0 sense version.
However, today I ran into multiple issues, I thought installing the latest Sense Lollipop firmware and installing the latest ARHD 5.0 rom would do the trick, sadly that did not work.
I flashed the latest sense firmware and the ROM only for it to boot saying my Data is corrupt and i have to reset my phone, i say okay(was going to do that anyway) but then I access my recovery (TWRP) and my Internal storage/Cache/Data will not mount. I tried going back to GPE (atleast so my phone would work) but I cant do that either because even with the GPE firmware, the data partition wont mount and my internal storage shows 0 MB in TWRP, now im just stick in a bootloop/bricked device for hours. Any help would really be appreciated...thanks a lot.
Dev Edition RUU is what I would recommend. Partitioning is different on GPE versus Sense. So I'm guessing running the firmware only, since its not a complete image, did not change the partitioning back to the Sense partition scheme.
Converting from GPE back to Sense is not trivial, and not to be taken lightly. It seems like you tried to make up your own process instead of following any definitive guide or advice, which I do not recommend.
redpoint73 said:
Dev Edition RUU is what I would recommend. Partitioning is different on GPE versus Sense. So I'm guessing running the firmware only, since its not a complete image, did not change the partitioning back to the Sense partition scheme.
Converting from GPE back to Sense is not trivial, and not to be taken lightly. It seems like you tried to make up your own process instead of following any definitive guide or advice, which I do not recommend.
Click to expand...
Click to collapse
Thanks for your reply, to get this clear:
I should flash the Dev Edition RUU from (http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777) (3.28.1540.5) and then update the firmware to 4.16.1540.8 by just flashing that separate zip. However, if I flash the RUU wouldn't it relock my bootloader and put me on S-On and lose root and the custom recovery(Im terribly sorry if this sounds dumb, but my phone is soft bricked and I really need to get everything right this time), Is that the case if I flash the dev edition RUU? Thanks again.
Austin3161337 said:
However, if I flash the RUU wouldn't it relock my bootloader and put me on S-On and lose root and the custom recovery
Click to expand...
Click to collapse
No, RUU will not relock the bootloader. The only way the bootloader gets locked/unlocked is if you do so yourself.
Same with s-off, there is nothing that can change that aside from you making it s-on yourself.
Yes, you will lose custom recovery, as RUU will install stock recovery. So just flash stock recovery by fastboot after RUU. Then flash the ROM you want, which should already be rooted (so losing root is a moot point).
Official firmware.zip will also write stock recovery. So doing so would have caused the loss of TWRP anyway (unless it was a user modified firmware zip).
redpoint73 said:
No, RUU will not relock the bootloader. The only way the bootloader gets locked/unlocked is if you do so yourself.
Same with s-off, there is nothing that can change that aside from you making it s-on yourself.
Yes, you will lose custom recovery, as RUU will install stock recovery. So just flash stock recovery by fastboot after RUU. Then flash the ROM you want, which should already be rooted (so losing root is a moot point).
Official firmware.zip will also write stock recovery. So doing so would have caused the loss of TWRP anyway (unless it was a user modified firmware zip).
Click to expand...
Click to collapse
So I downloaded the RUU from (http://www.htc.com/us/support/htc-one-m8/news/) but its an .exe which requires me to plug my phone in which my computer cannot recognize because the phone won't boot at all, is there anyway I can install the RUU by not really needing to connect the phone to the computer? (Put the file in the external SD and install it via the bootloader maybe?) Any tips on that? Thanks
Austin3161337 said:
So I downloaded the RUU from (http://www.htc.com/us/support/htc-one-m8/news/) but its an .exe which requires me to plug my phone in which my computer cannot recognize because the phone won't boot at all
Click to expand...
Click to collapse
The phone doesn't need to boot into OS to run the RUU. It just needs to be able to get into bootloader/fastboot mode, which it can if the screen comes on.
If the device doesn't show on your PC, its a different issue. USB connectivity issue is almost always a driver issue. Install HTC Sync and HTC drivers, if you haven't already. Or uninstall and install them again.
I have a similiar issue. I had a tombile ruu.zip that a flashed as a 0P6Bimg.zip a kitkiat sense version for tmobile. Everything is cool and it runs fine. When I change cid and mid then flashed the sense lollipop firmware I lost my internal memory and twrp read storage as 0mb.
So idk
I flashed the Dev RUU as recommended by redpoint73, booted up and now it says that its updating to the latest firmware android 5.0 (OTA Update) However, I am going to install a custom recovery (TWRP) and put on ARHD instead, thanks for the help, and pretty much unbricking my device, lol.
Austin3161337 said:
I flashed the Dev RUU as recommended by redpoint73, booted up and now it says that its updating to the latest firmware android 5.0 (OTA Update) However, I am going to install a custom recovery (TWRP) and put on ARHD instead, thanks for the help, and pretty much unbricking my device, lol.
Click to expand...
Click to collapse
You're very welcome. Happy to help.
Did you have to do anything to get the RUU to run (like install drivers), or did you just end up running the RUU exe, and it worked?
redpoint73 said:
You're very welcome. Happy to help.
Did you have to do anything to get the RUU to run (like install drivers), or did you just end up running the RUU exe, and it worked?
Click to expand...
Click to collapse
I already had HTC Sync installed, had to boot into Fastboot USB for the thing to get recognized.
Hey there.
Got my M9.
Unlocked.
Flashed TWRP.
Installed SU.
Obtained root.
Flashing ROMs and it says 'successful' but when exiting TWRP, the device says 'No OS installed!'. I don't see a RUU in the forums. What I see is S-Off required and I don't have that. What can I do?
Don't use the latest TWRP.
http://forum.xda-developers.com/one-m9/general/guide-root-install-twrp-htc-one-m9-t3061133
sausje85 said:
Don't use the latest TWRP.
http://forum.xda-developers.com/one-m9/general/guide-root-install-twrp-htc-one-m9-t3061133
Click to expand...
Click to collapse
Thank you. I will do this now.
sausje85 said:
Don't use the latest TWRP.
http://forum.xda-developers.com/one-m9/general/guide-root-install-twrp-htc-one-m9-t3061133
Click to expand...
Click to collapse
It seems I can't get my pc to find the device (adb devices). I can't find what to rename TWRP.img to let the bootloader update the recovery itself with it on the sd card... do you know?
typhoonikan said:
It seems I can't get my pc to find the device (adb devices). I can't find what to rename TWRP.img to let the bootloader update the recovery itself with it on the sd card... do you know?
Click to expand...
Click to collapse
Disregard. I didn't realize you could flash recovery from within recovery >_>
Unlocked at htc dev and downloaded magisk and patched patched_boot.img(by using magisk) and flashed twrp recovery, twrp.img.
My htc 10 got infinite boot.
How to solve this problem?? I want to go to stock rom.
My status : Unlocked, s-on, twrp recovery, boot.img changed.
Help this company said:
Unlocked at htc dev and downloaded magisk and patched patched_boot.img(by using magisk) and flashed twrp recovery, twrp.img.
My htc 10 got infinite boot.
How to solve this problem?? I want to go to stock rom.
My status : Unlocked, s-on, twrp recovery, boot.img changed.
Click to expand...
Click to collapse
Run ruu for your software version from download mode
Tarima said:
Run ruu for your software version from download mode
Click to expand...
Click to collapse
I flased custom rom, twrp recovery. (unlocked, s-on)
I tried to flash stock rom with twrp recovery but failed.
I think s-off is first what I have to do.
Sunshine said " Flash the stock rom or near stock rom."
How to solve this??
S-off is not what you must do. I think you need to understand first what certain things do.
A stock HTC rom is not offered to be flashed with TWRP so that can't be done anyway, a stock HTC backup can be restored via TWRP but that's totally different from flashing it.
Custom roms are designed to flash with TWRP. Stock HTC images come as RUU files which are flashed via the download mode.
My 2 cents :
Flash leedroid and select magisk as root option. The installer does all the work and you are free from bloatware at the same time. Stock oreo rom is nice but won't be updated by HTC anyway so why not profit the things a custom rom offers you
Mr Hofs said:
S-off is not what you must do. I think you need to understand first what certain things do.
A stock HTC rom is not offered to be flashed with TWRP so that can't be done anyway, a stock HTC backup can be restored via TWRP but that's totally different from flashing it.
Custom roms are designed to flash with TWRP. Stock HTC images come as RUU files which are flashed via the download mode.
My 2 cents :
Flash leedroid and select magisk as root option. The installer does all the work and you are free from bloatware at the same time. Stock oreo rom is nice but won't be updated by HTC anyway so why not profit the things a custom rom offers you
Click to expand...
Click to collapse
I just want to go back to stock rom(Lock,s-on), But When I flash the sunshine to s-off, sunshine saying you need to stock rom or near stock rom.
My stastus : custom rom + unlocked + s-on
Help this company said:
I just want to go back to stock rom(Lock,s-on), But When I flash the sunshine to s-off, sunshine saying you need to stock rom or near stock rom.
My stastus : custom rom + unlocked + s-on
Click to expand...
Click to collapse
You don't need s-off to go back to your stock OS so i have no idea why you want to spend 25$ on it.
Mr Hofs said:
You don't need s-off to go back to your stock OS so i have no idea why you want to spend 25$ on it.
Click to expand...
Click to collapse
How to go back to stock rom? I downloaded stock rom and flashed stock recovery. But Failed...
Help this company said:
How to go back to stock rom? I downloaded stock rom and flashed stock recovery. But Failed...
Click to expand...
Click to collapse
Check download mode OS line, download corresponding RUU, rename the file, copy to sdcard and boot to download mode to flash it.
Simple as that
Mr Hofs said:
Check download mode OS line, download corresponding RUU, rename the file, copy to sdcard and boot to download mode to flash it.
Simple as that
Click to expand...
Click to collapse
1. volume down + power button
2. htc download mode. stock rom(2PS6IMG.zip)
There's some error. "22RU_HEADER_ERROR, FAIL22 RU_HEADER_ERROR".
I checked CID but..
Help this company said:
1. volume down + power button
2. htc download mode. stock rom(2PS6IMG.zip)
There's some error. "22RU_HEADER_ERROR, FAIL22 RU_HEADER_ERROR".
I checked CID but..
Click to expand...
Click to collapse
I didn't mention CID i mentioned OS LINE.
Mr Hofs said:
I didn't mention CID i mentioned OS LINE.
Click to expand...
Click to collapse
What's the OS LINE?? sorry, I'm nub..
Help this company said:
What's the OS LINE?? sorry, I'm nub..
Click to expand...
Click to collapse
Download mode - OS
The number there is the ruu you need.
Mr Hofs said:
Download mode - OS
The number there is the ruu you need.
Click to expand...
Click to collapse
Is this the number ?? OS 3.16.401.2
Help this company said:
Is this the number ?? OS 3.16.401.2
Click to expand...
Click to collapse
As been mentioned 3 times now......now get that RUU and flash it.
https://androidfilehost.com/?fid=673956719939830809
Cheers