Hi , today when using the camera app to record a video it got hanged and went off, restarted and put the code mobile went off again and never came on , just 3 months old mobile .
Stock android
when connected to windows PC, sounds comes , that device is connected and shows up in the device manger as qualcomm hs usb qdloader 9008 . ( no led , or screen on mobile )
power button long press or the volume and power does not work too .
whats the best option , show it to the service center/RMA ???
julesbgoes said:
Hi , today when using the camera app to record a video it got hanged and went off, restarted and put the code mobile went off again and never came on , just 3 months old mobile .
Stock android
when connected to windows PC, sounds comes , that device is connected and shows up in the device manger as qualcomm hs usb qdloader 9008 . ( no led , or screen on mobile )
power button long press or the volume and power does not work too .
whats the best option , show it to the service center/RMA ???
Click to expand...
Click to collapse
Try holding the power button for about 10 seconds waiting for a reboot. Once it reboots turn it off and use the "Option 2" from this guide, only when you get to step 6 of this "Option 2", DON'T do a "wipe data/factory reset" just yet, and do a wipe cache only and reboot. See if this will get your device behaving again.
https://support.google.com/nexus/answer/4596836?hl=en
And also do the above while you've removed your sim card.
Sent from my Nexus 5X using XDA-Developers mobile app
julesbgoes said:
Hi , today when using the camera app to record a video it got hanged and went off, restarted and put the code mobile went off again and never came on , just 3 months old mobile .
Stock android
when connected to windows PC, sounds comes , that device is connected and shows up in the device manger as qualcomm hs usb qdloader 9008 . ( no led , or screen on mobile )
power button long press or the volume and power does not work too .
whats the best option , show it to the service center/RMA ???
Click to expand...
Click to collapse
There's a reasonable chance your EMMC storage started dying.
If you have bootloader unlocked try flashing factory image.
If not, see if you can boot into recovery, then try flashing the full OTA (not the partial/differential OTA) using adb sideload.
If that doesn't work, there is a thread about recovering from qualcomm hs usb but that is from a bad flash, not a corrupt EMMC.
Most likely you'll need to RMA the unit, but those are some things you could try.
I removed the SIM card , now if i hold the buttons , i just get red light flashing nothing else
julesbgoes said:
I removed the SIM card , now if i hold the buttons , i just get red light flashing nothing else
Click to expand...
Click to collapse
RMA .
julesbgoes said:
I removed the SIM card , now if i hold the buttons , i just get red light flashing nothing else
Click to expand...
Click to collapse
Dead battery signal. It probably won't even charge anymore. Contact Google Nexus support and document all the troubleshooting steps you've done so they don't ask you repeat all this. They should ship you a new one and ask you to send the faulty one back.
Best of luck.
Sent from my Nexus 5X using XDA-Developers mobile app
Thanks for the replies , i got the mobile from amazon , so it has to be repaired by LG and they said the board is gone and all the data , i dont trust them because most Indians don't do software stuff.
The board is not in stock and will take more then 10-15 days .
Would have i avoid warranty if i had tried the qualcomm hs usb qdloader 9008 boot loader stuff ?
julesbgoes said:
Would have i avoid warranty if i had tried the qualcomm hs usb qdloader 9008 boot loader stuff ?
Click to expand...
Click to collapse
If you got the qualcomm loader via bad flash, I think the TOT file could have helped.
In your case, probably it wouldn't have helped, though given a 15 day wait, probably 3 week turnaround, it would have been worth a shot.
I wouldn't feel bad you didn't try it though, most likely would have been a waste of time as TOT file won't cure failing EMMC, which is the most likely explanation for what you described.
Related
Hey there,
I got this Desire Z from a friend as he was going to throw it away,
it does turn on, no notification light, screen doesnt turn on, no sounds but when i connect to my computer it shows up as Zeus Flash Device
Is the phone dead or is there any way to revive it?
im unsure what happened prior to it stopping working
any help appriciated
edit: found out its hard bricked, oh well lol
havokk said:
Hey there,
I got this Desire Z from a friend as he was going to throw it away,
it does turn on, no notification light, screen doesnt turn on, no sounds but when i connect to my computer it shows up as Zeus Flash Device
Is the phone dead or is there any way to revive it?
im unsure what happened prior to it stopping working
any help appriciated
edit: found out its hard bricked, oh well lol
Click to expand...
Click to collapse
Is this phone Rooted? well try this pull the battery out put it back in, and press and hold volume down button and press power and see if you are able to get into boot loader...
tricky !
two options
1- check bootloader (volume down + power) , if it gets a white screen with options , you can repair the device.
2- if it does not go into bootloader , then first download Htc sync for desire z , setup the android SDK , then plug ur phone inn, in command prompt , type *adb devices* .
If it shows a serial number below List Of Devices , then get back to this forum and report
And the last thing is the power Hardware button fine ?? Although quite impossible , but the hardware power button might be faulty !!
ahmedrzvi said:
Is this phone Rooted? well try this pull the battery out put it back in, and press and hold volume down button and press power and see if you are able to get into boot loader...
Click to expand...
Click to collapse
No response from anything lol
mohnish.killer said:
two options
1- check bootloader (volume down + power) , if it gets a white screen with options , you can repair the device.
2- if it does not go into bootloader , then first download Htc sync for desire z , setup the android SDK , then plug ur phone inn, in command prompt , type *adb devices* .
If it shows a serial number below List Of Devices , then get back to this forum and report
And the last thing is the power Hardware button fine ?? Although quite impossible , but the hardware power button might be faulty !!
Click to expand...
Click to collapse
Wasnt able to get into bootloader and nothing showing in abd lol
I unsinstalled and removed the driver that it was showing as when i plugged it in and now it lists itself as QHSUSB_DLOAD
After googling around it says this can be fixed with jtagging, and i know someone who does that so gonna let him take a look lol
And i know the power button is working as it doesnt show up in device manager untill i press it
!
as always JTAG FTW !!
hi. I encountered a problem on my phone that doesn't boot properly.
When i tried to switch on my phone it showed at first the welcome msg "Samsung S4 mini gt-i9192" then after that, a pitch black screen, could not properly boot. But i learn that it does not turns off after the screen turns all black, i have to press the power button first to turn off the phone.
This problem started when i installed an app with some compatibility problems.
I wanted to root my phone hoping that can solve the problem, but then again a problem occurred when i tried to connect my phone to my laptop. It fails to install MTP usb device to my computer. I tried connecting it again provided that samsung kies was installed but again failed to connect my phone. Therefore i cant root my phone because i cant copy the files needed to root to my phone sd card.
I tried reinstalling kies, installing mtp drivers but nothing happened. I tried also restoring the previous boot image, restoring factory settings using recovery mode. But then problem still exist.
And fyi my phone can't mount any external sd card using recovery mode. And i think it was not in a debugging mode.
Phone: samsung s4 mini gt-i9192
firmware: i dont know
So basically, the problem is:
my phone wont boot,
i cant connect it to my pc
and i cant root it.
How should i root or even flash my phone when i cant connect to my computer? Do you have any idea on how to solve this problem? Any solutions or suggestions would be much appreciated. tnx.
champagneerantja
emzgames said:
snipped.
Click to expand...
Click to collapse
Have you tried putting the phone in download mode (Volume Down + Home + Power) and then connecting it your p,c , if not give this a shot it should pick up the drivers , once done , take out the usb cable hold the power the button to shut down and boot up .
since you have not mentioned your OS am assuming it is windows , try taking out Kies via some software like revo uninstaller which will remove all directories plus all registry entires then reinstall it if you really need it.
dovakinn said:
Have you tried putting the phone in download mode (Volume Down + Home + Power) and then connecting it your p,c , if not give this a shot it should pick up the drivers , once done , take out the usb cable hold the power the button to shut down and boot up .
since you have not mentioned your OS am assuming it is windows , try taking out Kies via some software like revo uninstaller which will remove all directories plus all registry entires then reinstall it if you really need it.
Click to expand...
Click to collapse
tried both yet still unable to connect.
emzgames said:
tried both yet still unable to connect.
Click to expand...
Click to collapse
dial *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
dovakinn said:
dial *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
Click to expand...
Click to collapse
im afraid i cant do this coz i cant boot my phone properly, up to welcome msg only then screen black out, but not power off.
emzgames said:
im afraid i cant do this coz i cant boot my phone properly, up to welcome msg only then screen black out, but not power off.
Click to expand...
Click to collapse
ohhh best take your cell to your nearest service center then . if you can't flash anything and usb is not getting detected i don't see any other option , maybe someone more experienced here can help.
dovakinn said:
ohhh best take your cell to your nearest service center then . if you can't flash anything and usb is not getting detected i don't see any other option , maybe someone more experienced here can help.
Click to expand...
Click to collapse
yah, thats what im thinking. i just brought this here hoping to solve this problem without going to a shop. thanks anyway.
aac. To me put your phone in download mode then use moborobo(a windows software) . Just open it and it will install the driver. If it dies not work then use adb installer . Remember you should have only any one of the software at one tim means either moborobo or kies or adb installer
Sent from my GT-I9001 using xda app-developers app
btw have you tried to boot the phone in safe mode ?? if it boots in safe mode it is still fixable without going to service center. power down , power up+ tap the menu button 3 or 4 times at THE same time to boot into safe mode if it boots into safe mode that means the hardware and OS is fine if it does not well then your out of luck.
dovakinn said:
btw have you tried to boot the phone in safe mode ?? if it boots in safe mode it is still fixable without going to service center. power down , power up+ tap the menu button 3 or 4 times at THE same time to boot into safe mode if it boots into safe mode that means the hardware and OS is fine if it does not well then your out of luck.
Click to expand...
Click to collapse
tnx man, but no luck..
Tried flashing a custom rom?
So I bought a used G3 knowing about the issue it had; it didn't boot. I thought I could find a workaround to this but the phone doesn't boot, doesn't enter recovery or download mode. All the info I have is that when I take off the battery the pc sees it as an unknown device, while it's connected I press the power button for several seconds and it disconnects from the pc, reconnects after several more seconds of pressing the power button. Screen remains dead. Seller told me he had a perfectly working phone before he tried to root it and it never turned on again. One more indication is that the LED notification only flashed red a few times when I connected it to the wall charger and that was it. No LED working after that. I'm open to any suggestions though I guess I'm here for someone to tell me there's no hope reviving the device. Thanks in advance!
Same proble with mine but i bricked mines when update to lollipop and never turn on again . still waiting to some one help to revive my LG
If I come across any solution I'll post it here. In the meantime I've tried the following method on a freshly formatted laptop and I still get "Unknown Device" in Device Manager..
http://forum.xda-developers.com/showthread.php?t=2785089
same here
same problem, someone told me that if was the board or something like that and that it only can be fixed with a complete replacement of this, also, that it could be fixed with linux using comands to install .APK or .TOT.
linux sometimes sees it as Qualcomm CDMA Technologies MSM QHSUSB_BULK, using a virtual machine of linux ubuntu, windows 8.1 sees it as unknow device
LG dead since 3 months ago.................. i wasnt using the phone at all when this happended so........... :crying:
jc.delgado11 said:
same problem, someone told me that if was the board or something like that and that it only can be fixed with a complete replacement of this, also, that it could be fixed with linux using comands to install .APK or .TOT.
linux sometimes sees it as Qualcomm CDMA Technologies MSM QHSUSB_BULK, using a virtual machine of linux ubuntu, windows 8.1 sees it as unknow device
LG dead since 3 months ago.................. i wasnt using the phone at all when this happended so........... :crying:
Click to expand...
Click to collapse
I tried using a boot usb drive to see if ubuntu saw the device but it didn't. Maybe there's some things needed that I didn't do. The thing I don't understand the most is why do windows see it as an unknown device only with the battery out while if I connect the G3 with the battery on, it doesn't show anything on device manager..
Nubrig said:
So I bought a used G3 knowing about the issue it had; it didn't boot. I thought I could find a workaround to this but the phone doesn't boot, doesn't enter recovery or download mode. All the info I have is that when I take off the battery the pc sees it as an unknown device, while it's connected I press the power button for several seconds and it disconnects from the pc, reconnects after several more seconds of pressing the power button. Screen remains dead. Seller told me he had a perfectly working phone before he tried to root it and it never turned on again. One more indication is that the LED notification only flashed red a few times when I connected it to the wall charger and that was it. No LED working after that. I'm open to any suggestions though I guess I'm here for someone to tell me there's no hope reviving the device. Thanks in advance!
Click to expand...
Click to collapse
Hi there.
Please check these 2 threads out and see if any of it will help you. The one for the G2 can also be used for G3.
Here are the links:
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091 With this technique you would have to find the software online somewhere but this method does revive dead G3 with these symptoms.
http://forum.xda-developers.com/showthread.php?t=2475045
If I helped somehow, hit the THANKS button.
Good luck!
The thing is I can only get the device to be recognized as an Unknown Device in Device Manager and only with its battery out. If I keep 'volume up' pressed nothing happens, it's only shown after I simply connect the USB cable and it pops up after 10 seconds or so. It's very consistent in the way it behaves..
A small update, sometimes when I pull and put the battery again, I connect the phone to a pc while holding down vol- and the pc makes the connected usb sound while the phone led is blinking red for a couple of minutes, then it stops. That's about all there is concerning the phone giving signs of life..
Hey!
I just got a bricked N5X from my friend. It doesn't show any sighs of life (download mode, recovery, etc.) except lovely Qualcomm HS-USB QDLoader 9008 when I connect phone to the PC.
I searched a lot of post across the Internet and there are couple of ways to (at least try to) fix ix, but I miss files to do that. BoardDiag doesn't support this chip and even if I want to try I cannot find .tot files for 5x.
So is there any way to fix it? To get img files needed or something else?
Thanks in advance!
Unfortunately, my Nexus 5X just got bricked as well. It was working fine until all of a sudden, it rebooted while using Google Maps & Bluetooth to stream the navigation and music. Then it got stuck on the Google boot screen and since then, it would not boot. I was able to get it to start in bootloader mode and recovery mode a few times. I was even able to clear cache once but that was it. Now, I can only get it to start in bootloader after pressing and holding the power + vol.down button for at least 20 secs.
I tried plugging into my computer and it shows the Qualcomm HS- USB QDLoader 9008 (COM5) under Ports (COM & LPT).
What can I do to recover from this?
If you are able to go to the download mode, then maybe you can try LGUP to flash original image. You can more info on other xda forums
konker said:
Unfortunately, my Nexus 5X just got bricked as well. It was working fine until all of a sudden, it rebooted while using Google Maps & Bluetooth to stream the navigation and music. Then it got stuck on the Google boot screen and since then, it would not boot. I was able to get it to start in bootloader mode and recovery mode a few times. I was even able to clear cache once but that was it. Now, I can only get it to start in bootloader after pressing and holding the power + vol.down button for at least 20 secs.
I tried plugging into my computer and it shows the Qualcomm HS- USB QDLoader 9008 (COM5) under Ports (COM & LPT).
What can I do to recover from this?
Click to expand...
Click to collapse
hardware issue, google and LG are apparently aware of this. Mine just crapped out and Im one month out of warrunty so I was able to get google to do a one time replacement. Thought who knows how long that one will last.
My Nexus 5X just crapped out about 5 minutes ago. I was using Chrome and it froze, so I held the power key. It is stuck in a boot loop. If I VolDn+Power I get the menu to go to go into recovery, but it doesn't succeed. Tonight when I get home if there's anything to try via ADB I'd appreciate a link, but I figure it's the hardware problem. Bootloader Version BHZ11h. I'm out of warranty but have an extended one from my credit card company.
Same here...I am really frustrated about that!Another bricked nexus out of nowhere..!!Don't know what to do!
Since i still have warranty is it better to go to the place i bought to ''fix'' it as they said or send an email to google if they can replace it..?
what do you think? is there any way to save our data?
My Nexus 5x froze up without warning earlier this week while listening to spotify and playing ingress.
I managed to reboot it but the same thing happened again so I booted it up in recovery mode and did a factory reset. Now the phone is dead other then the LED flashing red while connected to the charger.
I contacted the reseller and i'm gonna ship it of today to be repaired i hope.. unless the repairshop claim it's been water damaged or some other "#ยค"#%.
Here's another Nexus 5X bricked: it frozes playing War wings.
Sent in warranty to LG repair center they changed the mobo and sent me back in 4 weeks: how many time could work now?
link: https://pan.baidu.com/s/1TmQ9jmdAym2NYt_YGyt2Cg pin : g5cg
this rom test at my phone nexus 5 use firehose 8974 , no firehose 8994 ,your must find 8994
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
tron1 said:
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
Click to expand...
Click to collapse
I tried not working
If i press&hold VOL+ while inserting the USB cable still my phone come with Qualcomm HS-USB Mode
thanks for your reply
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
tron1 said:
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
Click to expand...
Click to collapse
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
I don't know where to ask so I'm gonna try here. My G820N is stuck on Android 10 beta. Whenever I flash an official kdz, it only allows for emergency calls. Can't do anything. Any help would be appreciated
Following, in right here with ya.
atsuisofu said:
Following, in right here with ya.
Click to expand...
Click to collapse
Try entering download mode with phone disconnected from USB cable.
Also try to see if it gets recognized by LG-UP or by LG Bridge. These 2 softwares don't need download mode to be able to flash, just the phone to be recognized on some PORT.
Try also factory reset hard menu. Also try switching between Slot A and Slot B. There is also this backup method. Phone is not dead on one of those slots.
If nothing works (but slot a slot b should 100% work) , wait for the firehose, it's just around the corner. That will restore the phone back 100%.
For more info search v50thinq on telegram app. :good:
I can t get to download as it freezes and without the USB cable it doesn't even try and enter. I appreciate the recommendations. I was thinking of the a/b seit hbut without the use of fastboot I am at a loss of how to switch between the two as I thought the system chose and the switch happened upon rebooting once a system had been selected ie as in turning the unit off after loading the os set a flag to go to the opposite system upon completing the inftframs and boot sequence.
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
Hi, i'm facing the same problem today, my QM will not go into any mode other than the Qualcomm mode. Were you able to recover your phone finally ?
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
did you ever get it fixed. im having the same problem.
johnnycm77 said:
did you ever get it fixed. im having the same problem.
Click to expand...
Click to collapse
me too, do you fix it?
vikramanananda said:
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Click to expand...
Click to collapse
So, if the device, as you say, lost power during an update like that, then almost assuredly you have at least one, if not numerous corrupted partitions.
And, it's specific partitions on the device that allow it to enter download mode. One of these most know about or have heard of is the laf partition. But other have to be there also for it to work, I don't remember exactly what the others off the top of my head, but that info is easily found.
The key thing you need (or any others commenting same prob), is to be able to enter EDL mode and have qfil installed and recognizing the device. If you can get that far, it would be easy to find the correct partitions you could flash with qfil and then immediately go from qfil to download mode.
Many many people have done this. Just get qfil set up (see guides section) and get the device recognized. that takes some effort but it's def doable.