Related
Hi to alll
firstly i want to thx all the admin,mod ,and members for this great forum
iam a new member here,and new with the xda
i got one xda which is always in Test mode
it show 4 colored bars and writtin on it" WALLABY BootLoader V5.17" "GSM OK"
i am reading in this forum but not find anything that can help me
so,can anyone tell how to fix it
best regards
almoudamer
It is in bootloader mode at the moment. Have you tried removing the battery, waiting 30 seconds and then putting the battery back on?
Was the XDA working OK before it went into bootloader mode? Have you tried to flash the ROM recently? If nothing is working have you tried a hard reset?
If none of these work perhaps flashing the ROM might be the only solution.
this is XDA device ... so you can't remove the battery (easily at least ) ... try the hard reset ... if doesn't work then flash your ROM with any WM2003 ROM from the kitchen but I think you will have to apply the patch for bootloader 5.17 first
hi
ths for ur quick reply
i received thre phone in this status
i didn't do anything yet
iam only trying to read at this forum
can u help me how and from where to get the files to flash or patch my device
thx in advance
best regards
hi again
i went to
http://lumpistefan.dyndns.org/
and cooked a rom there and downloaded it as exe installer
now iam trying to open it with windows Xp it open black window and disappear
and with windows Me it said that it is not a valid win32 application
so,any help?
I think you are going to have to use the boot loader and an sd card to do this.
down load an .nb1 file and transfer onto an SD card using an SD card reader.
put it in you xda and reboot while holdong down the power button.
That will load a new rom for you.
hi to all
thx for ur replies and help
i think the best is to write the nb1 file to sd card and boot the xda with this sdcard
Now iam trying to write this file with XDArit version1.2 .but i get error
Failed to open device\\.\PhysicalDrive5
and i read in this theard
http://forum.xda-developers.com/viewtopic.php?t=3274
that if XDArit version 1.2 not work,then i should use version 1
and iam searching for version one and cann't find it
anyone can help me to find it or how to write the file to the sd card
Byway,ActiveSync not able to detect the Xda
best regards
go to
www.yorch.net
for version one
Hi to all
finally i success to updade using my sd card
but
my problem still the same
the xda still in Bootloader Mode
so any help plz
best regards
hi to allll
finally i solved my problem
it was hardware problem
thx to alll who helped me
best regards
What was the problem? A button stuck down?
hehehe
someone solder the power bottom ,so he made short between the pins of the switch
so i noticed that this switch no use ,i pres bot nothing happen ,do i checked it ,and it was th problem
thx for all who helped me in flashing this device
iam now have good idea how to flash ti
best regards
I tried to flash WM 6.1
and then Give me Error and now i have a black screen
any one can help me please!!!!
this would help
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
best of luck..
i tried all of that but not working
What error is it ?
i treid to upgrade to windows 6.1 , while i'm updating gives me error and i tried to restart my mobile but nothing at all even i can not access the bootloader
Is your computer recognizin' your PDA. What happens when you connect it to the USB port ? Also, try after removin' SIM and the SD.
P.S: And you still need to tell me, what error msgs do ya get ?
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
I presume that you are tryin' to install the ROM designed for Universal
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
try this, or search xda-developers usin' google, you may find the solution.
Error code 101 is actually connection error.
hey, are you usin' Windows Vista
no XP SP2 , but as i told you i think i installed rom not for universal
also my screen is dead nothing at all only black no serial or usb on the screen
aahmed12 said:
no XP SP2 , but as i told you i think i installed rom not for universal
Click to expand...
Click to collapse
Oh man,
you have screwed up your phone big time. Post a thread in General Discussion> Upgrading, Modifying and Unlocking. Someone there might b able to help you out on this.
All the best.
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Isaygarcia said:
i have a similar problem, but it just stucks on 7% of flash and then gives me an Error 112, i think it is the rom, and maybe it can be fixed with an eeprom flash or not? if it can be, can anyone give a how to do it?
Click to expand...
Click to collapse
hey bro, error 112 actually denotes ROM update error.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
follow Method 2 , if it doesn't work, then follow Method 1, mtty may prove useful in this situation.
Good Luck..
thanks !
i havent tried the method 2.. but method 1 doesnt seem to work..
many thanx..
ok that methods doesnt work.. im stucked not in bootloader... i can exit bootloader but the system doesnt start... when i press the reset button it just keeps white screen (w/o backlit) and nothing happens.. if i connect the phone in that state just unrecognizes it and if i press the light and power buttons (without resset) it starts the bootloader.. its not reading the rom
every time that i try to flash a rom on it just fails, and it gets the error 112, on every 7%... how can i fix it?
Oops! I omitted the quote
aahmed12 said:
my computer does not recognize my jasjar
I am so sorry what i remeber it was error code 101 , do you know i think the version that i tried to upgrade was not to universal
that's why this probelme happend.
Click to expand...
Click to collapse
I have the same problem. I mistakenly flashed the wm6.1 rom meant for BA. I dont think there is any remedy for this problem because the unit is not coming on and so cannot enter bootloader. The only sign of life is the red led which means the unit is not seeing the power supply ie it does not recognise that a battery is instaaled. No one has ever come up with a solution. The unit is bricked fullstop. I am already bidding on another unit on ebay.
i did chat with imate support and they advice me to go to any service center and they will fix it.
i tried many kind of solutions but it does not work so my last choise is to send it to imate service center.
I had rooted this my galaxy note 2 N7100 and was using CWM recovery and had tried many roms, the last working rom was Hawkish rom with Perseus Kernel from XDA developers
It was working perfect since first week of June then it started some lagging ang I had to restart it everytime it stops responding
so i decided to try another rom and flashed it with some (I dont remember it right now but i will update this in evening) ROM through sideload
everything went well but device went into bootlop
so i tried to wipe cache as well as user data still it didnt help
so desperately I formatted ext sdcard from the recovery (I did not had ext sdcard in the device)
and then it just went off without any message or anything
it doenst go to recovery or download mode ?? :crying::crying:
also I had replaced the display in January but i dont think its a problem of display since i tried start it up and then connected to PC and when i say adb devices it doesnt show up but I am not sure ?
ok this seems to be an SDS problem suggest you to go trough SDS Threads in this forum see if you could get some info on this ,.
aukhan said:
ok this seems to be an SDS problem suggest you to go trough SDS Threads in this forum see if you could get some info on this ,.
Click to expand...
Click to collapse
:good:Thank you very much for your reply and I have gone throught the SDS post but i dont think it is SDS problem
I think its something to do with formatting the ext sdcard from recovery as untill then it was working fine
hopefully i can repair it with fixing bootloader but I am not sure how to do that if phone does not start
unfortunately since i have replaced a lacd digitizer i dont have warranty from samsung so for my device i hope its not SDS :fingers-crossed:
kanchan.n.mahajan said:
:good:Thank you very much for your reply and I have gone throught the SDS post but i dont think it is SDS problem
I think its something to do with formatting the ext sdcard from recovery as untill then it was working fine
hopefully i can repair it with fixing bootloader but I am not sure how to do that if phone does not start
unfortunately since i have replaced a lacd digitizer i dont have warranty from samsung so for my device i hope its not SDS :fingers-crossed:
Click to expand...
Click to collapse
Suggest you to go trough this thread which is by Ketan
Go Trough this Service manual thread. .. . . . . . . . . . . http://forum.xda-developers.com/showpost.php?p=31987567&postcount=7
aukhan said:
Suggest you to go trough this thread which is by Ketan
Go Trough this Service manual thread. .. . . . . . . . . . . http://forum.xda-developers.com/showpost.php?p=31987567&postcount=7
Click to expand...
Click to collapse
thanks :good:
I have gone through that manual and I did all I could but still it didn't start up
expect the ANYWAY JIG thing since i didnt find the JIG anywhere online and was not sure how to connect all those cables shown in the picture
so desperately i had given it to repair shop and to my bad luck they dont know what is wrong with it
the only thing they told me is that the board (mother board) doesn't get power and they dont know the reason for that
now coming to repair the partition :
can it be because of partition or because of SDS ?
if its because of partition then at least i have some hopes
otherwise its a dead end
does anyone has any idea what can be the problem?
kanchan.n.mahajan said:
thanks :good:
I have gone through that manual and I did all I could but still it didn't start up
expect the ANYWAY JIG thing since i didnt find the JIG anywhere online and was not sure how to connect all those cables shown in the picture
so desperately i had given it to repair shop and to my bad luck they dont know what is wrong with it
the only thing they told me is that the board (mother board) doesn't get power and they dont know the reason for that
now coming to repair the partition :
can it be because of partition or because of SDS ?
if its because of partition then at least i have some hopes
otherwise its a dead end
does anyone has any idea what can be the problem?
Click to expand...
Click to collapse
Did you try re flashing your stock recovery and then flashing the Stock ROM through ODIN pc ?
tutorial : http://www.youtube.com/watch?v=2VVyQRdsnaA
SAJdroid said:
Did you try re flashing your stock recovery and then flashing the Stock ROM through ODIN pc ?
tutorial : http://www.youtube.com/watch?v=2VVyQRdsnaA
Click to expand...
Click to collapse
FYI
I cannot get into the download or recovery mode using key combinations:crying:
so if you have any other way to boot Note 2 in download mode other that Vol.Down+power+OK
please let me know
Thanks
kanchan.n.mahajan said:
FYI
I cannot get into the download or recovery mode using key combinations:crying:
so if you have any other way to boot Note 2 in download mode other that Vol.Down+power+OK
please let me know
Thanks
Click to expand...
Click to collapse
time for you to take it Service Center
extSDCard as emmc
is there any possibility that I can use this method to revive my note if i have SDS
https://leemn.wordpress.com/2012/10/25/galaxy-note-2-swapping-external-sd-card-as-internal-memory/
Dear XDA.
hi ,
i got note 2 international its almost 3 years on my property. and within this years i flash so many roms and also rooted several times , flash kernels several times , unbrick back to stock several times , downgrading it not much maybe 5x i think, no sd card problem, no sim problem ,
internal storage is good , hard buttons is good , cant flash to recovery only downaload mode , PC doesnt recognize the device , i got SDS-- ya SDS first i encounter this SDS i lost half the life of my note 2 but luckily i revive her ,i thought i trash the cancer but its still there. it turns out i got BUG -- its like forever in there. and i think i read and try so many solution that may see on google , but my faith is losing , i love her i dont want her to be trash in a trashcan ( gets me). i dont know if this a soft brick or hard or insane or hall of fame . i dont know what to do now . and one thing warranty is void if i go to a service and repair it do you think it cost me HARD?.
i tried different USB CABLE. clean the USB FORT .
change the battery.
i tried also different type of PC, LAPTOPS , DESKSTOP. ... windows and linux .
the thing is i just want the YELLOW .COM thing on ODIN to light up but i failed..
PLEASE HELP!. i dont know what to do ,,
and sorry for my grammar.
THANKS A LOT guys, maybe something came up and please that will be a fix for my note 2,
afte install marshmallow on my sony s phone by twrp adb method... that I was succeeded... bt have a rom problem when I reinstall marshmallow rom by adb and twrp I fonund only 1 -14 partition bt not found 15 no partition... and unfortunately I deleted all partition... so what method I can use for back my phone....please help me..
Hridoy Kanon said:
afte install marshmallow on my sony s phone by twrp adb method... that I was succeeded... bt have a rom problem when I reinstall marshmallow rom by adb and twrp I fonund only 1 -14 partition bt not found 15 no partition... and unfortunately I deleted all partition... so what method I can use for back my phone....please help me..
Click to expand...
Click to collapse
Flash the stock FTF using flashtool.
can you brother give the link of stoke rom/ftf file.. actually I use Sony sl t26i phone
Hridoy Kanon said:
can you brother give the link of stoke rom/ftf file.. actually I use Sony sl t26i phone
Click to expand...
Click to collapse
You can find the link for FTF here. Xperia SL is Xperia S hardware wise, just that it is slightly overclocked. So what ever works with Xperia S will work with Xperia SL and vice versa.
Hey bro if i switch off my phone when I am lost all partition on my phone. .can my phone will start when I switch on my phone ???? Please help me...Have a good day...
Hridoy Kanon said:
Hey bro if i switch off my phone when I am lost all partition on my phone. .can my phone will start when I switch on my phone ???? Please help me...Have a good day...
Click to expand...
Click to collapse
Can't say. But if it doesn't have any code related to boot, then it won't boot.
After deleted all partition by mistake. ..I have no idea what can I do that time ....then I switch off my phone....few minutes later when I press the switch on button but my phone didn't switch on...so my phone is now permanently dead or hardware problem ???? Please help me....I have not enough to money to buy another new one....
Hridoy Kanon said:
After deleted all partition by mistake. ..I have no idea what can I do that time ....then I switch off my phone....few minutes later when I press the switch on button but my phone didn't switch on...so my phone is now permanently dead or hardware problem ???? Please help me....I have not enough to money to buy another new one....
Click to expand...
Click to collapse
****... thats nasty buddy. Why did u do that man?? I Don't see any way to fix this (I'm not expert either). Just let us know if you find a way to fix it. This will help us a lot. You know it can happen to us also. And I mean no harm. Just curious. God help u.
Any Xda developers help me out...Please give any solution to recover my phone from this problem. ..Please and please
Hridoy Kanon said:
Any Xda developers help me out...Please give any solution to recover my phone from this problem. ..Please and please
Click to expand...
Click to collapse
Try rubber band trick once. Google "Xperia S rubber band trick" for it. Else Your last option would be taking it to a mobile shop, there they flash firmware via a different method.
Sorry too late for my post but if someone else have the issue....
If you have delete or do something wrong with your partitions table, you need to know that it is not a problem IF you don't restart the device and IF you have not formatted anything.
So for you it will not work but for other, if you are in the same situation just do that :
- plug device on Wall charger (you need to be sure that the device will never reboot before the end of the procedure)
- delete wrong partitions (wrong start/end cylinders) or any wrong ordered partitions (p1 can't now be p2 for example)
- recreate every partitions with the good start/end cylinders and respect order (I hope that you have at least do a fdisk -l before your changes to have the old partition table values. But if not you can ask on forum and I think (need verification) that every Xperia S have the same partition tables - except for p14, p15 but it is not important)
Once done you will be able to restart the device without issue.
Why ?
Because when you change the partition table, when you delete a partition or create a partition etc... this action just change the MBR of the device (some bytes at the beginning of the sdcard). So NO data are lost (of course if you format a partition after you will lost some data).
So by recreating the partition table before rebooting, you recreate "pointer" to real and still available partitions/contents (again if you have not do any format after your mistake)
---------- Post added at 03:54 AM ---------- Previous post was at 03:50 AM ----------
Please contact @nageswarswain . It can maybe explain to you what can be done because his device was bricked and now alive (motherboard change if I well remember. No idea about the cost)
If all the partitions are gone then there is no way that we can recover the device..I have tried in many ways like JTAG, dead boot repair but all things failed.then I was the only way I.e. to replace the motherboard.But I suggest all those who bricked by formatting all partitions should try to recover by JTAG. If that fails go for a new motherboard.I bought an old device really cheaply from a boy whose camera was damaged and replaced the motherboard with mine.
But my phone didn't getting on when I press the on button. ..
I deleted all partition on my phone I have no idea what happened. ..then I switch off my phone. ..restart my phone but phone didn't on when I press the on button....and also not connected usb
Brother can u give me link of "jtag" and how to use it. .
Hridoy Kanon said:
Brother can u give me link of "jtag" and how to use it. .
Click to expand...
Click to collapse
You can't do it on home.go to repair shop and ask him to repair.its better first goto Sony care and give them the phone and don't say them anything.just say its not turning on from last night.
Ok brother. .. Thanks for all the information you provide me....
After 1 month later I connect my dead xperia sl..and i saw the led is on..it was red color..up to 10 min the led is on.. I connect my phone with charger every time i saw red led on.. So my phone now can be recover or repair ??
Or what can I do now for back my phone ..plz help me..
I have downloaded twrp app but it cant locate recovery partition please I really nead help ( sony xperia s lt26i phone)