Hi,i have MTCB KGL unit since 1 month ago i did the mic mod and every thing work will and mic sound become great . After upgraded to the last May firmware . Mic not work any more . No one can hear me . I tried to install another firmware but the same problem . I checked the mic mod may be the wire dissconnect but i found no problem . Tried another mic but still the problem . So please advice what is the problem ?
Did you check in settings in expert/factory settings something changed with the upgrade? If wiring hasn't been affected it should be software and not hardware issue
Sent from my SM-G935F using Tapatalk
the factory setting is default values. i checked it . the mic mod i did is connect new jack with shilded cable positive and ground connected to the new jack and the other side of the shilded cable connected to pin 4 in bluetooth card and Not connected the ground to pin 5 . As the mic will take the earth from the jack the connected to the dvd body.
Smart man said:
the factory setting is default values. i checked it . the mic mod i did is connect new jack with shilded cable positive and ground connected to the new jack and the other side of the shilded cable connected to pin 4 in bluetooth card and Not connected the ground to pin 5 . As the mic will take the earth from the jack the connected to the dvd body.
Click to expand...
Click to collapse
Which default value, since there's whole bunch of them.
Smart man said:
the factory setting is default values. i checked it . the mic mod i did is connect new jack with shilded cable positive and ground connected to the new jack and the other side of the shilded cable connected to pin 4 in bluetooth card and Not connected the ground to pin 5 . As the mic will take the earth from the jack the connected to the dvd body.
Click to expand...
Click to collapse
Did the same mod but connected ground to grd on the BT module. However don't think makes any difference to your connection. Did you cut the pin4 or removed the c32 smd?
Sent from my SM-G935F using Tapatalk
margaldi said:
Did the same mod but connected ground to grd on the BT module. However don't think makes any difference to your connection. Did you cut the pin4 or removed the c32 smd?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I removed c102 that connected to pin 4 . I have kgl rk318 . Do you think that something happend makes the mic dont take the ground from dvd body ? Any way i will connect the ground to pin 5 of the bluetooth card and check .
Smart man said:
I removed c102 that connected to pin 4 . I have kgl rk318 . Do you think that something happend makes the mic dont take the ground from dvd body ? Any way i will connect the ground to pin 5 of the bluetooth card and check .
Click to expand...
Click to collapse
Hope you solve the problem
Sent from my SM-G935F using Tapatalk
Problem solved . Finally i found the problem was in factory setting bluetooth device changed i dont know why . But i changed it mic work again . Thanks for every one helped me
mic mod
Smart man said:
the factory setting is default values. i checked it . the mic mod i did is connect new jack with shilded cable positive and ground connected to the new jack and the other side of the shilded cable connected to pin 4 in bluetooth card and Not connected the ground to pin 5 . As the mic will take the earth from the jack the connected to the dvd body.
Click to expand...
Click to collapse
hi is there a detailed description of the mic mod hopefully with pictures> Does it work with supplied mic? Thanks
Smart man said:
Problem solved . Finally i found the problem was in factory setting bluetooth device changed i dont know why . But i changed it mic work again . Thanks for every one helped me
Click to expand...
Click to collapse
What BT device do you have set now in the Factory settings (working well)?
Related
When I plug in my earphones my phone starts to call the last person I spoke to. This happens a couple of times in a row and then it stops and I can watch video or play music without interruption. Does anyone have an idea what this is and how I can fix it?
Had the same problem here ....Can not figure it out either. I have the HTC headset that connects directly into the usb jack'. Sometimes it will happen constantly and other times never happen. I noticed though when it starts to happen and I soft reset the phone it seems to stop the issue for a while. I have two different headsets and the same thing happens to both. But it definitely only happens when there is a headset in use.
I've had this happen a few times (just a couple times over the course of a year), while plugging in the HTC adapter that came with the Tilt 2, that looked like this:
http://www.amazon.com/Mini-USB-Headset-Adapter-2-5mm-3-5mm/dp/B002HNTHKM
I use this adapter in the car, to charge the phone and connect the audio to my car stereo via the 3.5mm jack.
With this same setup, I've also randomly (just a few times also) received a message on the phone's screen to pick the output type (NTSC or PAL) for the video out adapter (when obviously, there is no video out adapter connected).
It APPEARS (not certain) that the times that my phone dialed itself, the adapter was not quite properly seated in the phone's ext-USB jack. Since the HTC headphones have the ability to place calls, I'm thinking there is something going on with the ext-USB jack and plug (short circuit, fouled connection, etc.), where it thinks you are pressing the call button on the HTC headset.
I've seen similar posts on these forums, where the video-out message was possibly traced back to bent pins on the ext-USB jack. Maybe you have a similar issue. Its possible you have bent/damaged pins on the ext-USB jack on your phone, of on the headset plug. Try examining the headset plug, and the ext-USB jack on the phone for broken, missing pins, etc. If possible, try a different HTC headset, and see if the issue persists.
I am currently having this issue and it also only happens when the adapter is plugged into my phone. So does that mean the connection on the adapter could be defective? Is there a way to disable automatic calling from the earphones?
pho_shizzle said:
I am currently having this issue and it also only happens when the adapter is plugged into my phone. So does that mean the connection on the adapter could be defective? Is there a way to disable automatic calling from the earphones?
Click to expand...
Click to collapse
your issued as same as my phone. firt time I think that it 's from Rom . when I tried flash other rom it happened again . until now I still can't find to disable automatic calling when earphone connect to the phone
I had also this problem and after flashing another rom, the problem is over.
Dragonner said:
I had also this problem and after flashing another rom, the problem is over.
Click to expand...
Click to collapse
you can try click many time button on earphone where container micro & received signal on the wire? if you clicj this button whether it dial call or not?
Have you ever try other earphone connect to your phone? whether this problem still happen?
please let me know your result.
Dragonner said:
I had also this problem and after flashing another rom, the problem is over.
Click to expand...
Click to collapse
you can try click many time button on earphone where container micro & received signal on the wire? if you clicj this button whether it dial call or not?
Have you ever try other earphone connect to your phone? whether this problem still happen?
please let's me know your result.
pho_shizzle said:
I am currently having this issue and it also only happens when the adapter is plugged into my phone. So does that mean the connection on the adapter could be defective? Is there a way to disable automatic calling from the earphones?
Click to expand...
Click to collapse
This is often an issue with the adapter or headset you are using. Try another one. Its possible the pins in the phone's ExtUSB socket are bent/damaged. There was a similar thread about this a little while ago. The OP tried a different headset, and it solved his issue.
For a few days now the external audio isn't working anymore and if I set the System Settings->Accessory->Use External Speakers when docked all audio players start behaving weird.
Sometime I get the message that the audio format of the file isn't supported or the file starts playing with abnormal his speed (perhaps 3 times as fast) but in any case no sound is heard.
Sometimes I have to reboot the phone to get it straight again.
With the internal speaker or anything plugged directly into the phone headset output all audio plays perfectly.
Any ideas?
Hikanio
What kernel are you using. . Did you change the kernel recently. . If so try the stweaks audio settings
Sent from my GT-N7100 using Tapatalk 2
pakure said:
What kernel are you using. . Did you change the kernel recently. . If so try the stweaks audio settings
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
I am still on the unrooted Standard Kernel 3.0.31-1071214, so I wonder if there are others experiencing the same issue.
Problem solved: related to USB cable from charger to docking station
I just found the cause for the problem:
The USB cable between the original Samsung charger and the docking station was changed.
Although charging in the docking station obviously worked fine, it seems the the resistance of the cable caused a voltage drop in the docking station that lead to the malfunction.
Beware of the charging cable and the high current our smarphone draws from it.
Cheers
Hikanio
Further to this, I just discovered that the dock audio will not work for me when connected to a USB port for charging: I had to connect the mains charger and then the audio worked! It does seem to be a current issue.
Cheers - Andrew
My roommate and I are having the same issue where our auxiliary ports. We tested 3 different cables on 2 Toyotas and a VW. It looks like there is a issue with how the ports are grounded in the Toyotas, is this a software or hardware issue? In Toyotas the phone could not recognize if it was connected to headphones, auxilary or not connect at all. It would constantly switch between the 3. And end up often choosing to play sound through the phone speakers. The VW had no issues.
Any fixes or suggestions?
Same problem here. If I put in the cable the icon shows up for a second and than disappears. When I touch the other end of the cable while it is plugged in, the icon shows up permanently
[email protected] said:
Same problem here. If I put in the cable the icon shows up for a second and than disappears. When I touch the other end of the cable while it is plugged in, the icon shows up permanently
Click to expand...
Click to collapse
What kind of car are you driving?
inc0gn3gr0 said:
What kind of car are you driving?
Click to expand...
Click to collapse
On my car (Honda Civic Eg with Jvc Radio) everything is ok, on the car of my chief with an fm transmitter the aux icon disappears within a second. On my old Moto Razr I everything worked as expected. I dont know if its a software issue or hardware issue. Maybe I give this phone back, I'm not sure, I like it but this aux issue really annoys me.
[email protected] said:
On my car (Honda Civic Eg with Jvc Radio) everything is ok, on the car of my chief with an fm transmitter the aux icon disappears within a second. On my old Moto Razr I everything worked as expected. I dont know if its a software issue or hardware issue. Maybe I give this phone back, I'm not sure, I like it but this aux issue really annoys me.
Click to expand...
Click to collapse
2011 Camry 2010 Corolla the icon for aux might show, the icon for headphone might show or nothing. It is random and I don't know if it is hardware or software.
Having the same issue. There is another thread about it as well. Really bums me out because I love this phone but I use music through my phone in the car quite often.
Sent from my SM-N900A using XDA Premium 4 mobile app
I'm sure I'm not the only one who has experienced this issue as Google shows. Has anyone found a fix to the stupid headphone jack not working thing. How if you use certain devices the phone will not output audio. Like the aux in my car or at my work? BT works fine. Headphones work fine its mainly aux. Unplugging the device and replugging it a few times will eventually solve the issue. the thing I think is funny. I plug my aux in and it shows the little aux symbol on my phone in the status bar. but as soon as I start Google Music, it goes away and disables the aux cable. obviously that is a software thing. Is anyone working on it?
Chyrio said:
I'm sure I'm not the only one who has experienced this issue as Google shows. Has anyone found a fix to the stupid headphone jack not working thing. How if you use certain devices the phone will not output audio. Like the aux in my car or at my work? BT works fine. Headphones work fine its mainly aux. Unplugging the device and replugging it a few times will eventually solve the issue. the thing I think is funny. I plug my aux in and it shows the little aux symbol on my phone in the status bar. but as soon as I start Google Music, it goes away and disables the aux cable. obviously that is a software thing. Is anyone working on it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmobile-lg-g3/help/auxiliary-cord-t2845174
http://forum.xda-developers.com/lg-g3/help/aux-cable-problem-t2802719
http://forum.xda-developers.com/tmobile-lg-g3/help/finicky-connection-car-audio-jack-t2825158
Stupid lg it's always something with them so the best fix is to rub your aux cable.... Can't wait for cm but thank you for the threads
EDIT: tried soundabout, fixes issue at least for me thanks bfranklin!
settings:
Soundabout service > auto restart
Wired Headset Behavior > all checked but the last one
Sent from my LG-D851 using Tapatalk
bfranklin1986 said:
http://forum.xda-developers.com/tmobile-lg-g3/help/auxiliary-cord-t2845174
http://forum.xda-developers.com/lg-g3/help/aux-cable-problem-t2802719
http://forum.xda-developers.com/tmobile-lg-g3/help/finicky-connection-car-audio-jack-t2825158
Click to expand...
Click to collapse
I give you props for going to find all these threads . I would of said go read and search. You are a good man.
AWESOME G3
Chyrio said:
I'm sure I'm not the only one who has experienced this issue as Google shows. Has anyone found a fix to the stupid headphone jack not working thing. How if you use certain devices the phone will not output audio. Like the aux in my car or at my work? BT works fine. Headphones work fine its mainly aux. Unplugging the device and replugging it a few times will eventually solve the issue. the thing I think is funny. I plug my aux in and it shows the little aux symbol on my phone in the status bar. but as soon as I start Google Music, it goes away and disables the aux cable. obviously that is a software thing. Is anyone working on it?
Click to expand...
Click to collapse
I run soundabout pro and never any issue with my aux out with any device I was plugged into
Soundabout only somewhat works for my headphones.. Powered headphones really confuse the crap out of this device.
Lol
AWESOME G3
Hi,
anybody here have a Ford Focus working fine using the SYNC application to works with the FORD original SYNC.
I insert a new ROm from here ( update_4_4_4_1024X600_RK3188_11_MAL_25_12_2015) but the SYNC still all in chinese and i dont know how to change it to portuguese or english
I also dont hear nothing. Perhaps the application is directed to another sound output ...
Any help is apreciated.
Kind Regards
Franc
I am having the same issue!
I have a Ford Focus and a KLD RK3066 unit. I've updated my HU many times, using more than 5 different firmwares and every time the SYNC app is MUTED. There must be something wrong with the sound output, as mentioned!!
NOTE FOR NON FORD OWNERS: SYNC is a hardware (that is controlled by the HU in an app with the same name) that comes with the car that controls native bluetooth calling and music playing. It can be used together with the HU, using the car's much better microphone and USB connector. Losing this function is really bad for a Ford owner.
Please some help!
Thanks
kiko4949 said:
Hi,
anybody here have a Ford Focus working fine using the SYNC application to works with the FORD original SYNC.
I insert a new ROm from here ( update_4_4_4_1024X600_RK3188_11_MAL_25_12_2015) but the SYNC still all in chinese and i dont know how to change it to portuguese or english
I also dont hear nothing. Perhaps the application is directed to another sound output ...
Any help is apreciated.
Kind Regards
Franc
Click to expand...
Click to collapse
Mashio said:
I am having the same issue!
I have a Ford Focus and a KLD RK3066 unit. I've updated my HU many times, using more than 5 different firmwares and every time the SYNC app is MUTED. There must be something wrong with the sound output, as mentioned!!
NOTE FOR NON FORD OWNERS: SYNC is a hardware (that is controlled by the HU in an app with the same name) that comes with the car that controls native bluetooth calling and music playing. It can be used together with the HU, using the car's much better microphone and USB connector. Losing this function is really bad for a Ford owner.
Please some help!
Thanks
Click to expand...
Click to collapse
You can ask the seller if the HU can support the SYNC.
alvinjones377 said:
You can ask the seller if the HU can support the SYNC.
Click to expand...
Click to collapse
It does actually! There's even an app that comes in the Android called SYNC, which displays all SYNC information (and it works, but sadly somehow is muted and i can't figure out how to fix it's sound)
Mashio said:
It does actually! There's even an app that comes in the Android called SYNC, which displays all SYNC information (and it works, but sadly somehow is muted and i can't figure out how to fix it's sound)
Click to expand...
Click to collapse
hi, Im also a ford focus owner and i have rk3188 HU (KGL5) you should check in the factory settings the CANbus option. My sync apk works great (spanish) and sounds a little bit lower than the HU sound, so try to max the vol (maybe it is, sometimes if im at level 9 sound i cant hear it, i usually place at 20 vol level). I´ve used some malaksys ROM and i had no problem, and today i upgraded the MCU and still works. Now im having some FC but i think with a factory reset it will solve. The app also works with steering wheel controls, (if a press the SYNC key in it calls the app)
Hi, i have a Erisin ES2301F (1024x600 Rk3188 KGL) with a Ford Kuga MK1 (2009). CanBus module HW 1.0 FW 2.0. In Factory Menu (126) i put Focus-Modeo-Explorer (Simple) but SYNC doesn't work. How can i made it doing something...
In the past i had a Sony CD6000 BT, and i removed only the head unit ( i leave the BT module connected and it seem still powered) but the SYNC app doesn't do anything. I connect the cell with BT of the headunit, or i have to do a new search? I don't see any BT source than the one of the Erisin.
Add:
The question is: maybe with another ROM, i could view which door is opened, what temperature i have set in the climatronic and so on? I'm sure those signals are on canbus of my car (Kuga Titanium) 'cause i read on the cluster of the display of the car, and i see some chinese radio that showing those info. One for all is the Joying.
If those info will pass on the radio, also SYNC should works, 'cause in the electric diagram original mic and original BT are on canbus, all connected directly to GEM.
So, OR the decode module don't works..... or the MCU is so different that doesn't capture those signal.
Someone have the answer?
I have a Ford Escape but I have not figured out how to wire in my canbus to this radio (I have a joying). Can someone point me to the right direction?
dcplaya said:
I have a Ford Escape but I have not figured out how to wire in my canbus to this radio (I have a joying). Can someone point me to the right direction?
Click to expand...
Click to collapse
Hi,
first, try to set Ford Focus Raise in factory canbus setting.
second, check if you have connected AUX L and AUX R cinches to corresponding ones (auxL to Aux L and aux R to aux R) in your harness.
I have so in my Focus and SYNC is ok, but the layout and maintenance of the app is horrible.
czarekskib said:
Hi,
first, try to set Ford Focus Raise in factory canbus setting.
second, check if you have connected AUX L and AUX R cinches to corresponding ones (auxL to Aux L and aux R to aux R) in your harness.
I have so in my Focus and SYNC is ok, but the layout and maintenance of the app is horrible.
Click to expand...
Click to collapse
What are the AUXL and AUX R cinches?? In the quadlock Ford , i have CAN L e CAN H connected to Quadlock of the radio, then they go to decoder box and returned on the radio into the special connector.
in my case - as in uploaded photo, nr 2, white and red chinches
In my case is total differenti. I have only the quadlock . all signals coming from there. No RCA chinches. Maybe you have a focus 3 (2012+). My canbus decoder has only one connector
I think my Escape (2011) with SYNC isn't supported at all. I cant find any wiring harness that works with Joying. I know where my Canbus wires are and could splice them in but I can't even find a generic canbus joying harness.
Did anyone success making Sync work on a Focus 2015 restyling?
New MCU
jperezch said:
Did anyone success making Sync work on a Focus 2015 restyling?
Click to expand...
Click to collapse
Hi,
I have installed a new 8.1 Android head unit, at first it didn't work but the supplier sent me a new MCU that works with Focus 2015. Anyone wants the MCU? Maybe your SYNC works too
foicanetadavo said:
Hi,
I have installed a new 8.1 Android head unit, at first it didn't work but the supplier sent me a new MCU that works with Focus 2015. Anyone wants the MCU? Maybe your SYNC works too
Click to expand...
Click to collapse
I've bought an 8.1 tesla style radio for my 2015 focus with sync2 but steering wheel controls don't work! anyone can help me?
Where does the special port jack connect to ...
czarekskib said:
in my case - as in uploaded photo, nr 2, white and red chinches
Click to expand...
Click to collapse
I dont have the that black sync port ..rest wires connected ... HU goes completely mute when i press sync button... any suggestions ..also.. noob to HU discussion here
I have ecosport 2016 titanium.... head unit....10 inch , 7.1 , 2gb 32gb variant local reseller hypersonic ...
Ravi Venugopal said:
I dont have the that black sync port ..rest wires connected ... HU goes completely mute when i press sync button... any suggestions ..also.. noob to HU discussion here
I have ecosport 2016 titanium.... head unit....10 inch , 7.1 , 2gb 32gb variant local reseller hypersonic ...
Click to expand...
Click to collapse
okay found that port...the local technician had just not used it...sync working perfectly now....allthough that UI needs some improvement
Ravi Venugopal said:
okay found that port...the local technician had just not used it...sync working perfectly now....allthough that UI needs some improvement
Click to expand...
Click to collapse
pics from aliexpress, these r just for total amount of cables required....connect at both ends of canbus. i am using focus config as ecosport Is not shown on the settings.