Develop Bugs

Honda HR-V Android Media Console

I have a 2018 Honda HR-V from Brasil. Its equipped with an Android 4.0.4 media console that is "blocked" to outside apps. I want to install more apps, especially Waze and GoogleMaps, and more...
I have made a factory reset and after I have allowed installation of third party apps in the settings menu and tried to install Mike_S Honda Permission, when the file is named "HondaAppCenter_A1.apk".
I tried in two ways, both not working:
1. Download the file on my computer and trying to install in the car using a USB stick - going to install app icon and then it shows me the file but once I press it, the install button is grayed out and I can't continue.
2. Downloading the file directly form the website to the console - the install processes starts but at the end it says that the app wasn't installed without giving any explanations.
I don't know how to program files and compile / decompile etc., so please avoid suggesting these kind of solutions.
Thanks

Please help
anyone?
PLEASE....

kaktos11 said:
anyone?
PLEASE....
Click to expand...
Click to collapse
Same problem here...
I have tried to follow instructions from this thread: https://forum.xda-developers.com/android/general/guide-how-to-enter-developer-mode-2017-t3621582
But no luck.
Anyone has any ides?

Anything???

Found the solution! Worked for me (European HR-V 2017)
You can find full description here: https://forum.xda-developers.com/ge...ct-android-t3179549/post77497592#post77497592
Short description is:
1. Downgrade system version RC7/8 to RC6.1 (file available in a link below is described as "compatible with Civic Tourer with Honda Connect ID code 6VCB" but worked perfectly for me)
2. Reset to factory defaults (you will loose all settings!)
3. change the name of any app you want to install to HondaAppCenter_A1.apk (find the version that supports supports Android 4.0.4 and ARM processor)
4. Copy it to USB and go to install app... works like a charm

What about from note usb stick: "if you want to install the program you need a honda certificate". How did you do that?

axh said:
Found the solution! Worked for me (European HR-V 2017)
You can find full description here: https://forum.xda-developers.com/ge...ct-android-t3179549/post77497592#post77497592
Short description is:
1. Downgrade system version RC7/8 to RC6.1 (file available in a link below is described as "compatible with Civic Tourer with Honda Connect ID code 6VCB" but worked perfectly for me)
2. Reset to factory defaults (you will loose all settings!)
3. change the name of any app you want to install to HondaAppCenter_A1.apk (find the version that supports supports Android 4.0.4 and ARM processor)
4. Copy it to USB and go to install app... works like a charm
Click to expand...
Click to collapse
Hello!
Where can I download the RC6.1 downgrade file for the 2016 Honda Jazz?
Regards

Hi all. Does anyone know how to change the USB from HOST to DEVICE mode, like in this video?
I have a 2017 european HR-V model, and I managed to get to the Developer dialog screen by pressing "Menu + Brightness + Power" buttons for about 5 seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After entering "Detail Information & Setting" I've once again pressed the "Menu" button for a couple of seconds and got to the "Developer dialog" screen:
However, from this point I can't make any button combination to configure the USB mode.

A numpties guide to rebranding

This is simply a collection of information with some blanks filled in to allow those not as well versed in huawei/ADB as myself to rebrand. After 4 days of agony with Funkyhuawei and very little info i managed to resolve the issue myself. Primarilly, rebranding from pie on their toolkit would not work and i did not feel comfortable rebranding the more involved ways explained on here here.
You will need a membership to FH and credits. Also to have selected the same version eg 8.0.0.159 for the TARGET region. for me, i was c782 but rebranding to c432 so selected clt-l09c432 8.0.0.159
It is written with the intention of using FHRebrandTool2, as this one allows you to remain as CLT-L09 if that is your model, not force a switch to L29 even without dual sim
First, obviously, if you cant/havent unlcked FRP and bootloader, stop reading now. You're process is finished lol
Second, remove all security pins and fingerprints (developer options>require to be unlocked>off)
If you are on pie, use this incredibly simple automated script setup from @Androlark thank you my friend for this as you saved me here https://r.tapatalk.com/shareLink?ur...share_tid=3841687&share_fid=3793&share_type=t this is necessary as rebrandtool does not operate correctly with android 9 but fh instructions and even FH help are unclear on
For the correct software, download your latest android 8 version from Firmware Finder, taking note of the changelog, the flashing requires older update version with THREE folders, the giveaway is the changelog says "this will rollback your device to emui8" (dont rollback using Hisuite, as it itself advises not to if device unlocked. When selecting download in FF you may be presented with a list of many folders, most with the same name, simply click one of each name (update, public and cltxxxxxhw) transfer these to your phone after checking "check availability by imei" and doublechecking you have selected the correct region (C782,c432 etc)
Before flashing, to save panic, READ "AFTER FLASH INSTRUCTIONS" in flashy folder of extracted flashtool downloaded from above.
Follow post and flash.bat instructions and its all automated.
Factory Reset as advised when complete
Wahey you're back on old faithful Oreo and still device unlocked
Now startup device, complete basic setup to access menu, ensure adb AND allow adb during charge mode are on (this helps stop adb turning back off at restart in some cases) ensure to forget any wifi connection you used during setup
Back to fastboot (device off, hold power down,connect cable to computer) once loaded run FHRebrandTool2 again, being careful if you use manual entry to assign new model and region
Once complete and you restart you will keep getting connect usb to continue rebrand dont panic, hold power until shutdown then hold volume down and connect usb to computer again, you will get Erecovery. Select Install latest package and use the FunkyHuawei instruction from here, EG change DNS on router or use a computer as a hotspot to install new region software and wait.........wait.........wait.........funkyhuaweis carrier pidgeons are a bit slow
Rebranded and update back to pie and enjoy the precious security updates

Proof is in the pudding [emoji16] currently waiting on hisuite downloading my first update to 161
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my CLT-L09 using Tapatalk

x88 pro 10 android tv box - new firmware

Hello,
Hope to get some help here.
I've got a x88 pro 10 android tv box running android 11.
Recently I updated the firmware via the box update function.
Not sure if that is what causing my problems.
Sometimes it completely shut down, only solution is to unplug the power completely.
There is other issues as apps stopping and closing or just not running.
Reset has been done several times.
Is it possible to install android 10 on this box instead and how?

How to use RockChip Batch Tool​
Updated on Wednesday, March 23rd, 2022
These are instructions on how to flash or install stock firmware (ROM) on devices powered by RockChip Chipset using the RockChip Batch Tool.
Caution: Flashing or installing firmware using the RockChip Batch Tool will wipe the data from the device. Therefore, we recommend you take a backup of your data before using the tool.
Install .img Firmware using the RockChip Batch Tool​
Download and install Rockchip Driver Assistant on the computer. If in case, RockChip Drivers are already installed on the computer, then SKIP this step.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download and extract RockChip Batch Tool on the computer. After Extracting the tool, you will be able to see the following files:
Open RKBatchTool.exe to Launch the Tool:
Once the tool is launched, you will be able to see the following window:
Click on the Browse button and Locate the Firmware (.img based) on the computer:
Once you have successfully Loaded the firmware, you will be able to see the Loading firmware Finished message on the tool:
Turn Off the Device:
Press and Hold Volume UP Key on the Device and Connect it to the computer using the USB cable.
Do not release the Volume UP Key on the device until Icon 1 turns Green in Color:
Once the tool successfully detects the device, Click on the Restore button to begin the flashing or installation process:
Now, RockChip Batch Tool will flash or install the firmware (ROM) on the device (flashing usually takes 4-6 minutes to complete):
Once the flashing process is completed successfully, will be able to see Upgrade/Restore Done Success message:
Close RockChip Tool by clicking on the Exit button:
Disconnect the Device from the Computer and Restart it.
Congratulations! You can now use your Mobile Device without facing any issues.
Notes​[*] Cation: Flashing or installing the firmware using the RockChip Flash Tool will wipe the data from the device. Therefore, we recommend you take a backup of your data before using the tool.
[*] RockChip Driver: If you are looking for the RockChip Driver compatible with the RockChip Tool, then head over to the Download RockChip Driver Assistant page.
[*] Alternative Tool: RockChip Factory Tool is the best alternative, which allows you to flash or install .img firmware on any RockChip Device.
[*] Credits: RockChip Batch Tool is created and distributed by Fuzhou RockChip Inc. So Full credit goes to them for sharing the tool for free.

I need original firmware Android 10 for X88 Pro 10. Please help.

TCL P8 Android TV Several issues with MKV to DLNA playback. Anyone have the same problems? Is there a solution please.

Hello, I have some problems with the media center of my TCL P8 Androidtv after the major update to Android 11 V715. Video playback stops by itself after a few minutes and jumps to a new VIDEO. I have to clarify that this only happens with MKV videos in DLNA (no fast forward-reverse. Sudden stop of the video and jump to the next one. Lost function of resuming the video from the last time seen and stopped. General delay of a few seconds to open files in DLNA and even playback delays)
TCL 50P8 2019 Model---V715 Android 11 DLNA on Windows 10 Pro (Updated) i7 32GB

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I tried to just update the media player and indeed I went to the version 6.00.70 but Unfortunately it didn't work and even worse I lost the appearance of the Dolby Audio logo it no longer appears before the Media Center update the playback of MKV HD necessarily made the Dolby Audi logo appear but no longer now

Now I'm going to try to do a new 'clean' update from an IMG file downloaded from the TCL Update database and then we'll see

https://www.mediafire.com/file/cdxvns5h1ef3s9x/V8-R851T02-LF1V715.zip/file

This file is only for the platform V8-R851T02 and is to upgrade to version V715 Android 11

For anyone having problems updating here is the correct method to follow:
If you are having general problems with your TCL TV, try the following:
1. check if you are running the latest firmware version, if not update it with an OTA file
2. fully power off your tv (unplugging the power cable) and plug it back in again
3. If nothing helps, try a reset from a hidden TV menu (reset All and Reset shop will not wipe TV. Apps will be untouched, initial setting required like passwords, WiFi)
4. last thing to try is to reinstall your tv fully with the latest IMG file (will wipe your data, picture and sound settings will stay)

*HOW TO INSTALL*
Preparation:
- USB drive has to be FAT32
- it should contain nothing else than the firmware
- prefer using the USB 2.0 slot on your tv
- prefer using a USB 2.0 drive
- if it fails re-download the file again
- if it still fails try another usb drive
- Use a windows pc, no macos as macos unzips it wrong automatically
*OTA*
1. Download zip
2. copy zip to USB Drive (FAT32)
3. plug it in TV (preferably USB 2.0)
4. in the settings -> update -> choose local update
*IMG* (this will wipe your android data)
1. Download zip
2. unpack zip (sometimes it contains one IMG file, sometimes some files in it) & copy to USB Drive (FAT32)
3. plug it in the tv
4. shut down the tv
5. then press & hold the power button on the tv (not remote) for 5 seconds until the LED is flashing and wait for it to be installed.
The power button is on EVERY TV and can be found most of the time behind the status LED in the middle of the TV

Flashing Done

Finally I throw in the towel even after flashing the tv twice by OTA and by IMG and after entering the hidden menu and doing 'Reset ALL' and 'Reset Shop' the same problems still persist I can't do anything more than to hope that a next small minor update will solve these malfunctions of the native multimedia player with HD videos in DLNA UPNP network

Pixel Experience 13 Newbie Flashing Guide (credits to S8Hype btw)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello! This is a recreation of S8Hype's Pixel Experience Guide Since it was a bit outdated.
Let me start with the bugs.
Bugs:
Bluetooth Audio won't work (this is fixable look later in the guide)
FOD (Fingerprint) Does work but atleast on my phone works at a very low chance.
Anymore bugs you find please either post them in the comments or list them on the GitHub hoping for ponces to respond. (this is a GSI, expect bugs)
Guide (from stock to pe13):
1. Enable Developer Options by going to the Android Version Page and clicking Build Number 7 times.
2. Once done go to Developer Options and enable OEM Unlocking and reboot your device.
3. Once done shutdown your phone.
4. Hold volume down and volume up while plugging in your phone to a PC.
5. Once done you will see 3 options, Download Mode, Unlock BL, Reboot. Hold down Volume up to unlock the BL and if you get to Download Mode just force reboot your phone and try again.
6. Once you see Unlock your bootloader press volume up and your done for unlocking your bootloader (this will wipe your data! make sure to backup if you have important things!)
7. Once done it will reboot your phone and you will see the setup. Setup up the phone and shutdown again.
8. Once do the same thing in 4. and press only volume up!
9. Once done install Samsung USB Drivers. (https://developer.samsung.com/android-usb-driver) and Odin. (https://odindownload.com/download/Odin3_v3.14.4.zip)
10. Once done download the TWRP Version below the thread.
11. Once done put the TWRP file in the AP section and flash! (once done hold volume up + power to reboot to recovery and do it 1 more time when its done replacing recovery)
12. Once done go to Wipe -> Advanced -> Wipe Internal Storage and Data (you can also wipe the 2 cache sections)
13. Once done download the Pixel Experience 13 Image. (https://github.com/ponces/treble_build_pe/releases)
14. Once done transfer the .img file (extract the xz file first!) to the phone.
15. Once done go to Install Pixel Experience by going to Install -> Show img and click on the img and flash it to System.
16. And your done! You can reboot once done.
GSI Enhancements:
BT Fix: Go to phh treble settings, Misc and then Disable AD2P offload and BT is fixed!
Left corner at the edge fix: Go to phh treble settings, Misc and find the Corner radius and Force/Fake Corner radius settings and change them to 50! Reboot and your done.
Enable all Cameras: Go to phh treble settings, Samsung, and find Enable all cameras (Q vendor doesn't matter unless you are on binary 1 and never updated lol.)
That's it! Your done!
I will also help you unbrick your phone if something does go wrong. Anyway.
Bye.
Also here are some other GSI Fixes!
[AOSP GUIDE] A few tips to repair stuff and quality of life improvements after installing [AOSP GSI]
About - Generic System Images A few tips to repair stuff and quality of life improvements: - PHH Treble Settings - (device-specific settings) Open Settings > Phh Treble Settings. Here you have multiple categories. Head over to 'Samsung...
forum.xda-developers.com